$5.2B Global Marketplace for Asset Recovery & Surplus Inventory

    Boeing 737 Classic CFM56-3C1 Engine | Fresh Shop Visit | 31,427.80 TSN / 29,807 CSN | 3,110 Cycles Remaining at CAT C | 39 Degree Celsius EGT Margin | Serviceable (SV) | ATA 72 Engine

  • Boeing 737 Classic CFM56-3C1 Engine | Fresh Shop Visit | 31,427.80 TSN / 29,807 CSN | 3,110 Cycles Remaining at CAT C | 39 Degree Celsius EGT Margin | Serviceable (SV) | ATA 72 Engine
  • 15135447-3acf-4b4a-99f2-93734a1ed8ce
  • Photo Disclaimer: Photos are provided for general reference only and may not accurately represent the current condition, quantity, specifications, or exact items included in the sale. Items, equipment, accessories, components, packaging, or other property visible in the photos may not be included in the sale. Photos may also be outdated, representative, or supplied by third parties. Buyer inspection and independent verification are strongly recommended before purchase. Buyers should rely on the confirmed sale terms and independently verify what is included before making a purchasing decision.

    Boeing 737 Classic CFM56-3C1 Engine | Fresh Shop Visit | 31,427.80 TSN / 29,807 CSN | 3,110 Cycles Remaining at CAT C | 39 Degree Celsius EGT Margin | Serviceable (SV) | ATA 72 Engine Share with Buyers

    • ‌

    ‌
    Listing ID: 183066405

    Item Description

    FOR SALE

    Available for sale is 1 CFM International CFM56-3C1 turbofan engine, fresh from shop visit, in reported Serviceable (SV) condition, with 3,110 cycles remaining to the life-limited parts (LLP) limiter at CAT C.

    The engine underwent a shop visit involving replacement of LLPs in the Fan, High Pressure Compressor (HPC), High Pressure Turbine (HPT) and Low Pressure Turbine (LPT) sections.

    A Maintenance Performance Acceptance (MPA) test was completed on 9 November 2026 at a 23.5K rating, recording a 39°C EGT margin at takeoff.

    The engine is offered with QEC equipment, subject to the specified exclusions. The engine stand is not included.

    KEY ENGINE DETAILS

    • Manufacturer: CFM International
    • Engine Model: CFM56-3C1
    • Quantity: 1 EA
    • Condition: Serviceable (SV), As-Is / Where-Is
    • Shop Visit Status: Fresh Shop Visit
    • Total Time Since New (TSN): 31,427.80 Hours
    • Total Cycles Since New (CSN): 29,807 Cycles
    • LLP Remaining Life: 3,110 Cycles to Limiter at CAT C
    • Limiting Component: HPT Disk
    • MPA Completion Date: 9 November 2026
    • MPA Rating: 23.5K
    • Takeoff EGT Margin: 39°C
    • QEC Configuration: Included, Subject to Exclusions
    • ATA Chapter: 72 | Engine

    PRIMARY AIRCRAFT COMPATIBILITY

    • Boeing 737-300
    • Boeing 737-400
    • Boeing 737-500

    Engine installation and thrust-rating compatibility must be verified against the applicable aircraft and engine configuration, OEM documentation and approved modification status.

    ADDITIONAL APPLICATIONS

    • Boeing 737 Classic Aircraft Maintenance
    • CFM56-3 Engine Replacement Programs
    • Engine Exchange and Spare Engine Programs
    • Aircraft Engine Asset Management

    PRIMARY SYSTEM COMPATIBILITY

    • CFM56-3 Engine Family
    • Commercial Aircraft Propulsion System
    • Engine Fuel and Control Systems
    • Engine Accessory and QEC Systems

    ENGINE OVERVIEW

    The CFM56-3C1 is a high-bypass turbofan engine associated with Boeing 737 Classic aircraft. The engine supports commercial passenger and cargo operations and is used in aircraft maintenance, replacement and spare engine programs.

    The offered engine has completed a recent shop visit, including LLP replacements across the Fan, HPC, HPT and LPT modules. The reported remaining life to the CAT C limiter is 3,110 cycles, with the HPT Disk identified as the limiting component.

    SHOP VISIT AND LLP STATUS

    • Fan Rotor Module: LLPs Replaced
    • High Pressure Compressor: LLPs Replaced
    • High Pressure Turbine: LLPs Replaced
    • Low Pressure Turbine: LLPs Replaced
    • Remaining Cycles to Limiter at CAT C: 3,110
    • Limiting LLP: HPT Disk
    • Full LLP status and supporting records are subject to review.

    MPA TEST RESULTS

    • Test Date: 9 November 2026
    • Engine Rating: 23.5K
    • Takeoff Power Setting: 98.0% N1
    • Takeoff EGT: 930°C
    • Takeoff EGT Margin: 39°C
    • Outside Air Temperature: 26°C
    • Peak Vibration: 1.2 (Unit Not Specified)
    • Acceleration Check: 7.02 Seconds

    The recorded EGT margin reflects the MPA test conditions and does not constitute a guaranteed minimum operating margin.

    QEC CONFIGURATION AND EXCLUSIONS

    • The engine is offered with QEC, excluding the following components:
    • Pre-Cooler Valve
    • High Stage Valve
    • T12 Sensor
    • Throttle Box
    • Thrust Fittings / Links Assembly
    • Pressure Regulating and Shutoff Valve (PRSOV)
    • Rear Engine Mount
    • Cone Bolts
    • Nose Cowl
    • Thrust Reverser
    • Engine Stand

    The excluded items are not included in the engine package.

    TECHNICAL HIGHLIGHTS

    • CFM International CFM56-3C1 Engine
    • Fresh Shop Visit
    • Serviceable (SV) Condition Reported
    • TSN: 31,427.80 Hours
    • CSN: 29,807 Cycles
    • Fan, HPC, HPT and LPT LLPs Replaced
    • 3,110 Cycles Remaining at CAT C
    • HPT Disk Identified as Limiting LLP
    • MPA Completed 9 November 2026
    • 39°C Takeoff EGT Margin at 23.5K Rating
    • QEC Included with Specified Exclusions
    • Reported Available for Immediate Delivery

    THE ENGINE IS SUITABLE FOR:

    • Boeing 737 Classic Aircraft Operators
    • Commercial Airlines
    • Air Cargo Operators
    • Aircraft Engine Maintenance Organizations
    • CFM56 Engine MRO Facilities
    • Aircraft Engine Leasing Companies
    • Aviation Engine Traders and Brokers
    • Aircraft Engine Asset Management Companies

    -----------------------------------------------------------------------------------------------------------------------------------------------------------

    FREQUENTLY ASKED QUESTIONS (FAQs)

    Q: What is the engine model?

    A: CFM International CFM56-3C1.

    Q: What aircraft is this engine compatible with?

    A: The engine is associated with Boeing 737-300, 737-400 and 737-500 aircraft, subject to configuration and installation eligibility verification.

    Q: What is the engine condition?

    A: The engine is reported as serviceable following a fresh shop visit and is offered on an as-is, where-is basis.

    Q: What are the engine's total hours and cycles?

    A: TSN is 31,427.80 hours and CSN is 29,807 cycles.

    Q: How many cycles remain to the LLP limiter?

    A: The reported remaining life is 3,110 cycles at CAT C, with the HPT Disk identified as the limiting component.

    Q: Were LLPs replaced during the shop visit?

    A: Yes. The supplied documentation reports LLP replacements in the Fan, HPC, HPT and LPT modules.

    Q: What was the EGT margin during testing?

    A: The engine recorded a 39°C takeoff EGT margin during its MPA on 9 November 2026 at a 23.5K rating.

    Q: Is QEC included?

    A: Yes. QEC is included subject to the listed exclusions.

    Q: Is an engine stand included?

    A: No. The engine stand is excluded.

    Q: Is an FAA Form 8130-3 available?

    A: The sale offer lists FAA Form 8130-3 among the supporting documents. The final release certificate should be reviewed before purchase.

    Q: Is the engine available for immediate delivery?

    A: The supplied offer reports immediate availability, subject to prior sale and final commercial arrangements.

    Quantity:1 Engine
    Product Location:North America
    Condition:
    Serviceable
    Condition Description:

    ***Documents are available upon request.

    Being sold "AS IS, WHERE IS". Buyer is responsible for shipping and handling.

    Manufacturer:

    CFM International View more items from this manufacturer

    ‌
    :‌
    TraderSudheesh Sudhakaran +1 832 548 5660
    Seller:‌
    Seller Industry:‌

    Seller Terms

    • Salvex and the seller have the right to reject any and all offers.
    • This product is sold AS IS, WHERE IS.
    • Buyer is responsible for all taxes, duties, loading and freight charges.
    • Seller does not offer any warranties or manufacturer warranties.
    • Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
    • It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.

    Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.

    Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.