| Quantity: | 10 Pallets |
| Manufacturer: | General Electric View more items from this manufacturer |
| Model: | Model |
| Product Location: | Oklahoma, United States |
This lot of General Electric CF6-80C2 Engine Tooling is available for sale as surplus and is being sold as an asset liquidation for its owner.
Details are listed below:
Pallet 21
| Tooling | Description | Condition |
| 2C14272G01 | TOOL, INSTALLATION - THERMAL SHIELD | AVG. |
| 2C14821G02 | FIXTURE ASSEMBLY, RESTRAIN -IMPELLER | AVG. |
| 2C14038G02 | FIXTURE, LIFT - HPT ASSEMBLY AFT | AVG. |
| 2C14672G04 | FIXTURE, LIFT - HPT ASSEMBLY FWD | AVG. |
| 2C14920G02 | TOOL SET, BALANCE - HPT ROTOR | AVG. |
| 2C14252G01 | HPTR Rotor Disk/Shaft LAPPING TOOL | AVG. |
Pallet 22
| Tooling | Description | Condition |
| FIG.1004 | HPT ROTOR DIFFUSER ASSEMBLY | AVG. |
| 2C14132G02 | FIXTURE, LIFT - LPT | AVG. |
| 2C14638G01 | # 6 SUMP CLOSURE SET | AVG. |
| 2C14646G01 | PULLER, NO. 6 BEARING | AVG. |
| 2C14688P05 | PULLER SET - STAGE 1 HPT | AVG. |
| 2C14700G01 | PULLER, NO. 6 BEARING | AVG. |
| 2C14778G01 | TOOL SET, POSITION | AVG. |
| 2C14624G01 | LPT SHAFT LIFT CAP | AVG. |
Pallet 23
| Tooling | Description | Condition |
| 2C14610G01 | PUSHER - NO. 6 BEARING | AVG. |
| 2C14660G01 | TOOL, PREBEND AND SEAT | AVG. |
| 2C14678G02 | TOOL SET - STRAIGHTENING AND REMOVAL | AVG. |
| PA133 | AIR HYDRAULIC PUMP | AVG. |
| DT&E 2171 | 2ND STG HPT DISK LIFT FIXTURE | AVG. |
| 2C14061G03 | PULLER, NO. 4 BEARING | AVG. |
| 2C14673G07 | TOOL SET - INLET AND TRANSFER GEARBOX | AVG. |
Pallet 24
| Tooling | Description | Condition |
| 2C14199G07 | FIXTURE, INSTALL AND REMOVE | AVG. |
| 2C14220G01 | FIXTURE, LIFT - HP | AVG. |
Pallet 25
| Tooling | Description | Condition |
| 2C15611G01 | IXTURE, SIZING - OUTER LINER | AVG. |
Pallet 26
| Tooling | Description | Condition |
| 2C15610G01 | FIXTURE, SIZING -INNER LINER | AVG. |
Pallet 27
| Tooling | Description | Condition |
| 2C15006G03 | FIXTURE, RESIZE - DOME | AVG. |
Pallet 28
| Tooling | Description | Condition |
| 2C15004G04 | FIXTURE, INSPECTION - DOME | AVG. |
Pallet 29
| Tooling | Description | Condition |
| 2C15051G02 | FIXTURE, PRESSURE - AXIAL POSITION | AVG. |
Pallet 30
| Tooling | Description | Condition |
| 2C15010G04 | FIXTURE, ASSEMBLY/INSPECT - | AVG. |
440 Louisiana Street
Suite 550
Houston, TX 77002
