My Account Home
$5.2B Global Marketplace for Asset Recovery & Surplus Inventory

Categories

Manufacturers

All Listings > Oil and Gas > OCTG Accessories > Taper Mill, Junk Mill, Bushing, Crossover, Near Bit & More

Taper Mill, Junk Mill, Bushing, Crossover, Near Bit & More

ATTENTION: This item is no longer available.
VIEW AVAILABLE ITEMS
Quantity: 1 Lot
Product Location: South America

Seller Description

This lot of ­­­­­Taper Mill, Junk Mill, Bushing, Crossover, Near Bit & More is no longer needed for company's own operation and is being sold as an asset liquidation for it's owner.

Details are listed below:

Qty Description OD ID CONNECTION PIN CONNECTION BOX CONDITION Notes
1 TAPER MILL (FRESA DE PUNTA) 4 5/8"x 3 3/4" 1" 2 7/8" REG N/A GOOD OXIDO SUPERFICIAL EN CONEXIONES, LONG: 26 1/2", FISHING LENGTH: 10".
2 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 6 1/8"x 4 3/4" 1 1/2" 3 1/2" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 5/8", FISHING LENGTH: 8".
1 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 4 3/8"x 3 3/4" 1" 2 7/8" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 3/4", FISHING LENGTH: 8 1/2".
1 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 6"x 4 3/4" 1 1/2" 3 1/2" REG N/A REGULAR USADO, CORROSION EN CONEXIÓN, LONG: 6", FISHING LENGTH: 5 3/4". EN INVENTARIO ANTERIOR ESTABA SERIALIZADO COMO "EP182"
1 SKIRT MILL (FRESA CON GUIA) 4 3/4" N/A 2 7/8" REG N/A REGULAR REPARABLE.
1 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 4 5/8"x 3 3/4" 1" 2 7/8" REG N/A REGULAR USADO, CORROSION EN CONEXIÓN, REPARABLE, LONG: 12 3/4", FISHING LENGTH: 8 3/4".
1 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 5 7/8"x 4 1/4" 1 1/2" 3 1/2" REG N/A GOOD LONG: 12 1/2", FISHING LENGTH: 7 3/4".
1 JUNK MILL (FRESA PLANA SIN REVESTIMIENTO DE TUNGSTENO) 6"x 4 3/4" 1 1/2" 3 1/2" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 1/4", FISHING LENGTH: 8".
1 JUNK MILL (FRESA PLANA SIN REVESTIMIENTO DE TUNGSTENO) 4 3/4"x 3 3/4" 1" 2 7/8" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 3/8", FISHING LENGTH: 8 3/8".
1 JUNK MILL (FRESA PLANA SIN REVESTIMIENTO DE TUNGSTENO) 6"x 4 3/4" 1 1/2" 3 1/2" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 1/4", FISHING LENGTH: 8".
1 JUNK MILL (FRESA PLANA SIN REVESTIMIENTO DE TUNGSTENO) 4 3/4"x 3 3/4" 1" 2 7/8" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 3/8", FISHING LENGTH: 8 3/8".
1 JUNK MILL (FRESA PLANA SIN REVESTIMIENTO DE TUNGSTENO) 4 3/4"x 3 3/4" 1" 2 7/8" REG N/A GOOD OXIDO SUPERFICIAL EN CUERPO Y CONEXIONES, LONG: 12 3/8", FISHING LENGTH: 8 3/8".
1 JUNK MILL (FRESA PLANA CON REVESTIMIENTO DE TUNGSTENO) 4 3/4"x 3 3/4" 1" 2 7/8" REG N/A REGULAR USED CORROSION EN CONEXIÓN, REPARABLE, LONG: 10 1/2", FISHING LENGTH: 7 3/4".
1 WELDED CUP JUNK BASKET OR BOOT BASKET JUNK SUB (CANASTA CHATARRA DE COPA SOLDADA O TIPO BOTA) 8" 7 7/8"   4 1/2" REG 4 1/2" REG REGULAR/ GOOD REPARABLE PERO LA CAMISA ESTA FUERA DE NORMA
1 TAPER TAP (3 1/4"-4 3/4") 6 1/8" 1 1/2" 3 1/4" - 4 3/4" WICKER 4 1/2" IF REGULAR CORROSION, ROSCA WICKER REPARABLE, LONG. TAPER:24"
1 CROSSOVER TIPO PIN-BOX 4 3/4"x 3 3/4" 1 1/4" 2 3/8" IF 3 1/2" IF REGULAR REPARABLE, LONG: 16 7/8".
1 DRIVE BUSHING  4 1/2" 2" 4 1/2" FJWP 2 3/8" IF REGULAR CORROSION, PITTING, REPARABLE, EN EL LISTADO ANTERIOR APARECIA COMO "CROSSOVER BOX-BOX" PERO CORRESPONDE A UN DRIVE BUSHING.
1 DRIVE BUSHING  4 1/2" 2" 4 1/2" FJWP 2 3/8" IF REGULAR CORROSION, PITTING, PROTECTOR ATASCADO, REPARABLE, EN EL LISTADO ANTERIOR APARECIA COMO "CROSSOVER BOX-BOX" PERO CORRESPONDE A UN DRIVE BUSHING.
1 CROSSOVER TIPO PIN-BOX 6 3/4" 2 7/8" NC46 NC50 REGULAR CORROSION, REPARABLE.
1 CROSSOVER TIPO PIN-BOX 6 1/2" 2 7/8" NC50 NC46 REGULAR CORROSION, REPARABLE.
1 CROSSOVER TIPO PIN-BOX 6 3/4" 2 13/16" NC50 NC46 REGULAR CORROSION, REPARABLE.
1 CROSSOVER TIPO PIN-BOX 6 1/2" 2 7/8" NC50 NC46 REGULAR CORROSION EXTERIOR E INTERIOR, REQUIERE MUCHO TRABAJO.
1 CROSSOVER TIPO PIN-BOX 6 3/4" 2 13/16" NC50 NC46 REGULAR CORROSION, REPARABLE.
1 CROSSOVER TIPO PIN-BOX 4 1/8" 2" 2 7/8" IF 2 3/8" IF REGULAR CORROSION EN CONEXIONES, REPARABLE, LONG:17 1/2".
1 CROSSOVER TIPO PIN-BOX 4 1/4" 2 1/8" 2 7/8" IF 2 7/8" EUE REGULAR REPARABLE, LONG: 8 1/2".
1 CROSSOVER TIPO PIN-BOX 4 1/8" 1 3/4" 2 3/8" IF 2 7/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 13 1/4".
1 CROSSOVER TIPO PIN-BOX 4 13/16" 2 1/2" 3 1/2" IF 3 1/2" EUE REGULAR REPARABLE, LONG: 12 5/8".
1 CROSSOVER TIPO PIN-BOX 4 1/8" 1 1/4" 2 7/8" LH (ROSCA IZQ) 2 7/8" IF RH (ROSCA NORMAL) REGULAR REPARABLE, LONG: 10 1/2".
1 CROSSOVER TIPO PIN-BOX 4 1/8" 2 3/16" 2 3/8" EUE 2 7/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 14 3/4".
1 CROSSOVER TIPO PIN-BOX 5 3/8"x 4" 2 1/2" 3 1/2" IF 2 3/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 14 5/8".
1 CROSSOVER TIPO PIN-BOX 3 13/16" 1 1/4" 2 7/8" REG 2 3/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 10".
1 CROSSOVER TIPO PIN-BOX 6 1/4"x 4" 1 3/4" 2 3/8" IF 4 1/2" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 12 1/2".
1 CROSSOVER TIPO PIN-BOX 4 1/8" 1 1/2" 2 3/8" IF 2 7/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 12 1/2".
1 CROSSOVER TIPO BOX-BOX 4 11/16" 1 1/2" 2 3/8" IF 3 1/2" REG REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 14 3/4".
1 CROSSOVER TIPO PIN-BOX 4 1/8" 1 1/4" 2 7/8" REG 2 7/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 13 7/8".
1 CROSSOVER TIPO PIN-BOX 3 13/16" 1 1/4" 2 3/8" REG 2 3/8" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 10 1/8".
1 CROSSOVER TIPO PIN-BOX 4 11/16" 2 1/16" 3 1/2" IF 2 7/8" REG REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 11 1/8".
1 CROSSOVER TIPO PIN-BOX 4 1/2" 1 1/2" 2 3/8" IF 3 1/2" IF REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 12".
1 CROSSOVER TIPO BOX-BOX 3 3/4" 1 1/2" 2 3/8" IF 2 7/8" REG REGULAR REPARABLE, CORROSION, LONG: 24 1/4".
1 CROSSOVER TIPO PIN-BOX 3 5/8" 2" 2 7/8" EUE 2 3/8" EUE GOOD REPARABLE, LONG: 27".
1 CROSSOVER TIPO BOX-BOX 4 3/4" 1 1/2" 3 1/2" IF 2 7/8" REG REGULAR REPARABLE, REQUIERE TRABAJO, MUCHA CORROSION Y PITTING EN ROSCAS, LONG: 19 3/8".
1 CROSSOVER TIPO PIN-BOX 4 1/2"x 3 7/8" 1 5/8" 2 3/8" IF 3 1/2" EUE REGULAR REPARABLE, CORROSION EN CONEXIONES, LONG: 19 3/4".
1 CROSSOVER TIPO PIN-BOX 3 5/8" 2" 2 7/8" EUE 2 3/8" EUE GOOD REPARABLE, LONG: 27".
1 CROSSOVER TIPO PIN-BOX 4 1/4" 1 15/16" 2 3/8" EUE 2 7/8" EUE REGULAR CORROSION EN CONEXIONES, REPARABLE, LONG:22 1/4".
1 CROSSOVER TIPO PIN-BOX 3 11/16" 2 3/8" 2 7/8" EUE 2 7/8" EUE REGULAR PARECE SER UN SAVER SUB, REPARABLE, LONG: 13 1/2".
1 OVERSHOT SERIE-150 11 1/4" 11 1/4" N/A N/A 6 5/8" REG REGULAR PITTING EN ROSCA, REPARABLE, OXIDO PRESENTE, ARMADO, NO SE SABE MAS DETALLE.
1 OVERSHOT SERIE-150 9 5/8" CON EXTENSION 9 5/8" N/A N/A 6 5/8" REG REGULAR FS, ARMADO, USADO SIN DESARMAR (INCLUYE EXTENSION DE 9 5/8"), CORROSION INTERNA Y EXTERNA, REPARABLE (REQUIERE BASTANTE TRABAJO).
1 OVERSHOT EXTENSION 5 3/4" 5 3/4" 4 5/16" CONEXIÓN OVERSHOT CONEXIÓN OVERSHOT REGULAR CORROSION, REPARABLE.
1 OVERSHOT EXTENSION 9 5/8" 9 5/8"  - CONEXIÓN OVERSHOT CONEXIÓN OVERSHOT REGULAR CORROSION, REPARABLE (REQUIERE TRABAJO), INSTALADA EN OVERSHOT.
1 SPRING LOADED RETRIEVING TOOL (OVERSHOT) PARA CASING 5" 4 1/8" N/A N/A 2 3/8" EUE REGULAR 3 3/4" NOMINAL, NO INTEGRAL, ARMADO, ZAPATO S/TUNGSTENO, REPARABLE.
1 SPRING LOADED RETRIEVING TOOL (OVERSHOT) PARA CASING 5 1/2" 4 1/2" N/A N/A 2 3/8" EUE REGULAR NO INTEGRAL, ARMADO, ZAPATO S/TUNGSTENO, REPARABLE.
3 SPRING LOADED RETRIEVING TOOL (OVERSHOT) PARA CASING 7" 5 7/8" N/A N/A 2 7/8" EUE REGULAR NO INTEGRAL, ARMADO, ZAPATO C/TUNGSTENO, REPARABLE.
1 SPRING LOADED RETRIEVING TOOL (OVERSHOT) PARA CASING 5 1/2" 4 7/16" N/A N/A 2 7/8" EUE REGULAR NO INTEGRAL, CORROSION, PITTING EN ROSCAS, C/TUNGSTENO, REQUIERE MAYOR TRABAJO.
1 SPRING LOADED RETRIEVING TOOL (OVERSHOT) PARA CASING 5 1/2" 4 7/16" N/A N/A 2 3/8" EUE REGULAR NO INTEGRAL, CORROSION, PITTING EN ROSCAS, C/TUNGSTENO, REQUIERE MAYOR TRABAJO.
2 CIRCULATING SUB 3 3/4" 1 1/4" 2 7/8" REG 2 7/8" REG GOOD CORROSION GENERAL, REPARABLE, LONG: 17 7/8". FUERON IDENTIFICADOS COMO SAFETY JOINT (NO CORRESPONDE).
2 CIRCULATING SUB 4 3/4" 1 1/4" 3 1/2" REG 3 1/2" REG GOOD CORROSION GENERAL, REPARABLE, LONG: 18". FUERON IDENTIFICADOS COMO SAFETY JOINT (NO CORRESPONDE), E350 APARECIA EN INVENTARIO ANTERIOR COMO E35 Y E351 FUE IDENTIFICADA COMO E352 EN EL INVENTARIO ANTIGUO (NO CORRESPONDE).
1 SAFETY JOINT (CESTILLO) 4 1/8"  2 1/8" 2 7/8" IF 2 7/8" IF REGULAR CORROSION, REPARABLE, LONG: 29 5/8".
1 OVERSHOT GUIDE (GUIA OVERSHOT) 9 5/8" 9 5/8" N/A OVERSHOT SPECIAL N/A REGULAR CORROSION, CONEXIÓN OK. SE DEJO PUESTO EN OVERSHOT 9 5/8"
1 OVERSIZE (GUIA SOBREMEDIDA) 11 1/4"x21" 11 1/4" x 21" N/A OVERSHOT SPECIAL N/A GOOD REPARABLE, OXIDO SUPERFICIAL.
1 ENSANCHADOR (ROLLER REAMER) 9 1/2"x 13"   7 5/8" REG 7 5/8" REG UNKNOWN DEBIDO A SU ENVERGADURA SOLO SE APRECIA EN LOS CABALLETES SIN POSIBILIDAD DE CHEQUEAR SUS PARTES MOVILES, PRESENTA OXIDO EN CUERPO Y CONEXIONES.
1 PACKERS VARIEDAD       UNKNOWN SE ESTIMA QUE LOS PACKERS ESTAN EN MALAS A REGULARES CONDICIONES, YA QUE ESTAN A LA INTEMPERIE Y PRESENTAN OXIDO EN CUERPO Y CONEXIONES, SELLOS EN MALAS CONDICIONES.
1 NEAR BIT 6 1/2"x 8 3/8"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS. APARECIA EN LISTADO ANTERIOR COMO SD0048 (NO CORRESPONDE).
1 NEAR BIT 6 1/2"x 8 3/8"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 6 1/2"x 8 3/8"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 8"x 12 1/4"   6 5/8" REG 6 5/8" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 6 1/2"x 8 3/8"   4" IF 4 1/2" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 6 1/2"x 8 3/8"   4" IF 4 1/2" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 8"x 12 1/4"   6 5/8" REG 6 5/8" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 8"x 12 1/4"   6 5/8" REG 6 5/8" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 9 1/2"x 17"   7 5/8" REG 7 5/8" REG REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS. ESTABA SERIALIZADO EN INVENTARIO ANTERIOR COMO "SD18792" (NO CORRESPONDE).
1 NEAR BIT 6 3/4"x 8 1/2"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 6 3/4"x 8 1/2"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.
1 NEAR BIT 6 3/4"x 8 1/2"   4 1/2" REG 4 1/2" IF REGULAR CORROSION, NO HAN SIDO INSPECCIONADOS.

Other Listings in OCTG Accessories

(0 bids)
354 Units
Iraq
(0 bids)
1 Lot
Viet Nam
End Date: Sep-30-21 09:17 AM CST
(1 bids)
90 Units
Oklahoma, United States
(1 bids)
10 Units
Saudi Arabia
(2 bids)
35.5 Metric Tons
null, India
(0 bids)
8 Units
Peru
(1 bids)
1413 Unit
Kazakhstan
(1 bids)
334 Units
Texas, United States
(0 bids)
1700 Pieces
United Arab Emirates
(1 bids)
10.24 Metrics Tons
Italy
(0 bids)
15 Units
Asia-Pacific
(2 bids)
1959 Units
null, Hungary
(0 bids)
12 Units
Peru
VIEW ALL OCTG ACCESSORIES LISTINGS (29)

Other Listings in Oil and Gas

(2 bids)
31273 Feet
Middle East
(2 bids)
1760 Feet
Middle East
(3 bids)
7290 Feet
Middle East
(11 bids)
39.79 Metric Tons
United States
(0 bids)
1 Unit
North America
(2 bids)
31400 Feet
Asia-Pacific
(0 bids)
995.28 Feet
Asia-Pacific
(28 bids)
36640 Feet
Netherlands
(0 bids)
1 Unit
North America
(4 bids)
10958.01 Feet
Germany
(0 bids)
1 Heat Medium
Canada
(17 bids)
4 Units
Iraq
(2 bids)
4760 Feet
Middle East
(13 bids)
6653.54 Feet
null, Nigeria
VIEW ALL OIL AND GAS LISTINGS (1213)