| ID: |
183006063 |
| Quantity: |
2 Belt Bucket Elevators |
| Condition: |
The equipment was bought in 2012 and was never installed. It is new and in the boxes in storage since 2012.
No photos available of product as it is packed in crates for transport.
Being sold "AS IS, WHERE IS". Buyer is responsible for shipping and handling.
|
| # of Bids: |
0 PLACE A BID |
| Product Location: |
Egypt
|
| End Time: |
Bid As Soon As Possible |
| Time Remaining: |
Bid As Soon As Possible
|
| Trader: |
Alphonse Moujaes +1 832 426 3835ASK A QUESTION |
Seller Description
These units Belt Bucket Elevators are no longer needed for the company's own operation and is being sold as an asset liquidation for its owner.
1. Covered by maintenance hoist 2G14 01
Specifications:
| Number |
1 |
| Transported material |
raw meal |
| Capacity |
400 t/h |
| Density |
0,7 t/m3 |
| Width of bucket |
800 mm |
| Distance between centers |
89m |
| Conveying speed |
1,9 m/s |
| Filling ratio |
< 75 % |
| Power of motor |
2x90 kW - 1 500 rpm |
| Power of motor for the auxiliary drive |
2x3 kW - 1 500 rpm |
Parts:
- the head casing is in welded steel,
- the drive drum with stripe coating mounted on the roll bearings
- the boot casing with inspection doors,
- the return drum mounted on the roll bearings
- the conveying belt with assembly bolts for buckets
- the automatic tensioning device, with a counterweight
- the belt offset signals at the head drum
- the belt offset signals at the foot drum
- the rotation controller
- the bucket deformation detector
- the level sensors
- the two drive units consisting, for each, of a gearbox with
- incorporated anti-runback
- the elastic coupling
- the hydraulic coupling
- the auxiliary drive consisting of a freewheel clutch and geared motor designed for conveying speed of 0,1 to 1.5 m/s
2. Covered by maintenance hoist 2H11 34
Specifications:
| Number |
1 |
| Transported material |
raw meal |
| Capacity |
400 t/h |
| Density |
0,7 t/m3 |
| Width of bucket |
800 mm |
| Distance between centers |
86m |
| Conveying speed |
1,9 m/s |
| Filling ratio |
< 75 % |
| Power of motor |
2x90 kW - 1 500 rpm |
| Power of motor for the auxiliary drive |
2x3 kW - 1 500 rpm |
Parts:
- the head casing is welded steel,
- the drive drum with stripe coating mounted on the roll bearings
- the boot casing with inspection doors,
- the return drum mounted on the roll bearings
- the conveying belt with assembly bolts for buckets
- the automatic tensioning device, with a counterweight
- the belt offset signals at the head drum
- the belt offset signals at the foot drum
- the rotation controller
- the bucket deformation detector
- the level sensors
- the two drive units consisting, for each, of a gearbox with incorporated anti-runback
- the elastic coupling
- the hydraulic coupling
- the auxiliary drive consisting of a freewheel clutch and geared motor designed for conveying speed of 0,1 to 1.5 m/s
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
PLACE A BID
