$5.2B Global Marketplace for Asset Recovery & Surplus Inventory

    Attention

    No longer available.

    Solar Power Conversion Stations - for Grid-Connected Application (12 Units)

    Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted solar panels and accessories as part of a commercial repurposing strategy.

  • Solar Power Conversion Stations - for Grid-Connected Application (12 Units)
  • 183003530_687041
  • Photo Disclaimer: Photos are provided for general reference only and may not accurately represent the current condition, quantity, specifications, or exact items included in the sale. Items, equipment, accessories, components, packaging, or other property visible in the photos may not be included in the sale. Photos may also be outdated, representative, or supplied by third parties. Buyer inspection and independent verification are strongly recommended before purchase. Buyers should rely on the confirmed sale terms and independently verify what is included before making a purchasing decision.

    Attention

    No longer available.

    Solar Power Conversion Stations - for Grid-Connected Application (12 Units) Share with Buyers

    • ‌

    Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted solar panels and accessories as part of a commercial repurposing strategy.

    ‌
    Listing ID: 183003530

    Item Description

    These Solar Power Conversion Stations for Grid-Connected Application ­­­­­units are no longer needed for the company's own operation and is being sold as an asset liquidation for its owner.

    Specifications Revision Table:
    RevDateDescriptionBYCHKAPP
    A05-08-2018Issued for ReviewKVZTBRAR
    B05-10-2018Issued for ReviewKVZTBRAR
    005-11-2018Issued for PurchaseKVZTBRAR
    105-11-2018Re-Issued for PurchaseKVZTBRAR
    205-22-2018Issued for ReviewKVZTBRAR
    305-24-2018Re-Issued for ReviewKVZTBRAR
    405-30-2018Issued for PurchaseKVZTBRAR
    506-11-2018Re-Issued for PurchaseKVZTBRAR

     

    PART 2 - PRODUCTS
    Inverter – TMEIC Samurai
    Model #: TMEIC – Samurai Series (PVL-L1833GRM)
    INPUT (DC) @ 40 deg C Ambient
    Max input current3091 A
    Max input voltage1000 V (Open Circuit)
    MPPT range605 - 950 V
    Number of MPP trackers1
    Array TopologySolidly Grounded Negative
    DC EntryBottom - through removable floor plate. Floor plate shall be pre-punch and supplied with (16) 3in. male terminal
    adapters and sealing lock nuts (refer to Attachment ‘C’).
    DC Overcurrent Protective DevicesPV Listed Fuse Qty of (16 20 – 400A Frame) per Inverter –
    Refer to Table #1 for exact fuse quantities
    DC Termination ProvisionsProvide for the direct termination of (2) 1/C - #4/0 Al PV wire per pole for each
    input (i.e. four conductors per input)
    Ground Fault Circuit InterrupterYes
    OUTPUT @ 40 deg C Ambient
    Mains voltage3 x 418 Vac (+ 10% /- 12%)
    Mains frequency60 Hz
    Rated power1,833 kW / 2,000 kVA
    Rated Output Current2,762 at 40 C
    Power factor rangeAdjustable (0 to 1 lead/lag)
    Current harmonic distortion< 5% at rated power
    Auxiliary power supplySelf-Consumption: As Required by TMEIC For Customer use: 120/208 Vac, 3 PH, 4W, 5kVA
    NEMA 3R XFMRs, safety switches and distribution equipment
    Reactive Power Range
    (40C, 1PU Grid Voltage)
    +/- 800 kVAR up to 1833kW
    EFFICIENCY
    Max efficiency (without aux)98.8%
    Weighted CEC efficiency98.5%
    Standby power consumption (max)< 295 W
    MECHANICAL DATA
    EnclosureNEMA 3R
    Dimensions (HxWxD)2283 x 5000 x 1150 mm
    Weight6,000 kg (13,228 lbs)
    CoolingHybrid liquid / air-cooled
    DC Disconnects Per 690.16Yes
    AMBIENT SPECIFICATIONS
    Model #: TMEIC – Samurai Series (PVL-L1833GRM)
    Ambient operating temperature-20°C to +55°C
    Rel. humidityNo condensation from 5% to 95%
    Max altitude2000 m without derating
    PROTECTION & MONITORING
    Zone MonitoringYes – provide current monitoring of all (:
    Customer Data AccessProvide access to all MODBUS registers
    Grid monitoringAdjustable voltage and frequency range
    PV generator connectionPer IEEE-1547 & UL-1741
    INTERFACES
    Communications interfaceTrue ModBus® over TCP/IP – Converter from RS232 Not Allowed
    Communications HubIncluded in one inverter per PCS consisting of an Ethernet switch, I/O for XFMR
    alarms
    Transformer and inverter data points available over MODBUS TCP/IP
    I/O Cable AssembliesPreconnectorized cable assemblies to connect XFMR I/O to communications
    hub and power and signal cable to aux power panel
    STANDARDS & CERTIFICATIONS
    SafetyIEEE-1547, UL 1741
    Electromagnetic compatibilityIEEE 1547. FCC Part 15A
    Grid managementAs required per local utility per project
    Output MeteringThree-phase AC voltage and current, power factor, frequency, instantaneous
    power, kWh production, and any available faults and alarms.
    Medium-Voltage Step-up Transformer
    TypeLiquid-Filled Padmounted Transformer (Outdoor Rated NEMA 3R) - Two
    Winding
    StandardsIEEE/ANSI C57.12.00, UL Listed as step up XFMR
    StandardsNEC 2014 for auxiliary equipment, conductor and conduit installations.
    FluidNatural Biodegradable Fluid (FR3 or equivalent)
    Cooling ClassKNAN
    CoreGrain Oriented Steel
    Number of Windings2 Winding; H, X
    Phase3 Phase
    Frequency60 Hz
    Average Winding Rise55/65 °C
    Avg. Ambient Temperature40 °C
    Medium-Voltage Step-up Transformer
    Max Ambient Temperature50°C
    %Z5.75% nominal (+/- 7.5% Per ANSI)
    NL Loss @ 20 °CTBD W
    Load Loss @ 85 °CTBD W @ 95 °C
    CEC Weighted Efficiency99.1% @ 100% Load @ 85 °C
    Power Rating(s)2,000 kVA
    High Voltage34.5 kV Delta
    High Voltage Taps0.95, 0.975, 1.0, 1.025, & 1.05 per unit
    High Voltage BIL150kV BIL minimum (Per ANSI/IEEE based on Primary Voltage)
    Surge ArrestorNot provided with a transformer
    Low Voltage418 Vac  Y
    Low Voltage BIL30kV BIL
    Over Voltage105% OV at Full Load per ANSI/IEEE Standard
    Feed ConfigurationDead Front – 600A Deadbreak, Loop Configuration (6 bushings) w/6 parking
    stands
    ColorMatch Inverter
    Tank and CabinetDry Nitrogen Blanket Zone D (4) Seismic Rating
    Penta-head Cabinet Handle Bolt
    Tank cover/handhole may be bolted or welded
    HV BushingsOil to air epoxy
    LV BushingsClose Coupled with inverter - custom throated connection to mate directly with the inverter.
    FusesFactory-installed match melt fusing consisting of under oil current-limiting fuse in series with BAY-O-NET type weak link expulsion fuse - sized by manufacturer
    per rating
    Switches2-Position, fully-rated, LBOR Transformer Switch (Primary) with Lock-Out Tag-Out Provisions located in the external pad-lockable box.  Operable without exposure to live parts.
    LBOR switch operator must be outside of HV compartment.
    MonitoringPressure Relief Valve
    Liquid Level Gauge with Alarm Contacts Pressure / Vacuum Gauge with Alarm Contacts Thermometer with Alarm Contacts
    Gauges and alarm contact terminations to be located in an accessible location not exposed to live parts
    Revenue Grade MeterNot Included
    FittingsDrain Sampling Valve located in an accessible location not exposed to live parts and inside a lockable enclosure.
    Main drain valve - may be located within the LV Compartment, where
    convenient
    MarkingsUL Certified Label
    External Nameplate - Stainless Steel "Non-PCB" Label
    "For Use in Step-Up and Step-Down Applications" Label
    "Danger-High Voltage - Keep Out " Warning Label
    Production TestsRefer to section 1.6.3
    Warranty5-year Standard Warranty
    Elevation< 1000 m
    OtherStandard E-coat & powder paint process Schrader valve
    Oil sample valve External ground pad
    PCS Skid – Auxiliary Rack Components
    Auxiliary Power
    DESCRIPTIONRATING
    Voltage120/208, 3 PH, 4 W derived from inverter 418 Vac 3-Phase bus
    Components 
    Aux Transformer30 kVA XFMR with 5kVA dedicated to 120/208V. The remaining 25 kVA is for 480V.,
    NEMA 3R (not installed)
    PanelboardNEMA 3R – 120/208, 3 PH, 4W, 20AMCB, (18) Ckt w/ (5) 1P 15A and (1) 1P – 20A bolt
    on CBs
    Safety SwitchNEMA 3R
    LightingNone
    Receptacles(2) Double Duplex, GFCI, 20A, in WP enclosure fed from (1) 1P-20A Brk. Nipple WP
    box to panelboard
    Free Standing Aux Equipment
    Support
    Galvanized steel – Used to mount the safety switch and panelboard. Leave the remaining area of the rack for Owner furnished and field mounted equipment, including Network
    Control Units (NCUs) and antennas.
    Quantity:12 Units
    Product Location:
    Condition:N/A
    Condition Description:

    Being sold "AS IS, WHERE IS". Buyer is responsible for shipping and handling.

    Manufacturer:

    TMEIC View more items from this manufacturer

    ‌
    :‌
    TraderAna Santos +1 832 384 9940
    Seller:‌
    Seller Industry:‌

    Seller Terms

    • Salvex and the seller have the right to reject any and all offers.
    • This product is sold AS IS, WHERE IS.
    • Buyer is responsible for all taxes, duties, loading and freight charges.
    • Seller does not offer any warranties or manufacturer warranties.
    • Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
    • It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.

    Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing renewable energy equipment and solar panels sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.

    Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.

    Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.