My Account Home
Global Marketplace for Asset Recovery & Surplus Inventory

Categories

Manufacturers

All Listings > Oil and Gas > OCTG Accessories > Couplings, Bushings, Pup Joints, CrossOvers, Valves & More

Couplings, Bushings, Pup Joints, CrossOvers, Valves & More

PLACE A BID
Mouse over to Zoom
-
Click to enlarge
ID: 183002889
Quantity: 1 Lot
Condition: All the items are "as is, where is". Buyer is responsible for shipping and handling.
# of Bids: 0 PLACE A BID
Product Location: Egypt
End Time: Bid As Soon As Possible
Time Remaining: Bid As Soon As Possible
Trader: Felipe Bezerra   +1 832-429-2840 (WhatsApp)ASK A QUESTION

Seller Description

This units of Coupling, Bushing, Pup Joint, CrossOver, Valve & More ­­­­­is no longer needed for company's own operation and is being sold as an asset liquidation for it's owner.

Details are listed below:

Material Description Base QTY Type
Unit
ADAPTER:API,18-3/4IN TOP FLG,5000 LB,BOTTOM GUIDE RECEPTACLE & SPECIAL DESIGN FLG, TO COMPENSATE F/ REMOVAL OF MD TJ PACKER SYSTEM EA 1 ADAPTER
ANALYZER:RUGGED INFRARED,0.3PPM MIN DETECTION LIMIT RANGE,UNIVERSAL AC/DC,MODEL INFRACAL 2 ATR-SP,USE W/ HEXANE,PENTANE,CYCLOHEXANE& VERTREL MCA SOLVENT,3PPM IN SOIL MIN DETECTION LIMIT,W/ INTERNAL BATTERY,AUTO ADAPTER,100 MICRO L SYRINGE,W/ CALIBRATION RANGE F/WATER,EPA 1164 & ISO 9377-2 EA 1 ANALYZER
ANALYZER:RUGGED INFRARED,0.3PPM MIN DETECTION LIMIT RANGE,UNIVERSAL AC/DC,MODEL INFRACAL 2 ATR-SP,USE W/ HEXANE,PENTANE,CYCLOHEXANE& VERTREL MCA SOLVENT,3PPM IN SOIL MIN DETECTION LIMIT,W/ INTERNAL BATTERY,AUTO ADAPTER,100 MICRO L SYRINGE,W/ CALIBRATION RANGE F/WATER,EPA 1164 & ISO 9377-2 EA 1 ANALYZER
BIT,ROCK:MILL TOOTH,TYPE VG-C31,26IN,7-5/8IN REG API,IADC 115,THREE CJ EA 1 BIT
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4 X 10-7/8IN,F/ HIGH TEMP OR HIGH LOAD EA 2 BUSHING,SUBSEA:WEAR
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4 X 10-7/8IN,F/ HIGH TEMP OR HIGH LOAD EA 2 BUSHING,SUBSEA:WEAR
BUSHING:CROSSOVER,5-1/2IN,26LB/FT,VAM TOP HT BOX UP,6-5/8IN,32LB/FT,VAM TOP HT PIN DOWN,BMS-S230 GR 13CR,110KSI MIN YIELD STRENGTH,32 HRC,W/ ONE THD RECUT ON EA END EA 2 BUSHING:CROSSOVER
BUSHING:WATER,7 X 5-1/2IN,GR P-110,26LB/FT,VAM TOP HT PIN,23.4LB/FT,FH BOX,30IN LG EA 2 BUSHING:WATER
BUSHING:WATER,11-3/4IN,VAM SLIJ-II,4-1/2IN,IF NC50 EA 1 BUSHING:WATER
BUSHING:WATER,47.1LB/FT,7-5/8IN,VAM FJL PIN,4-1/2IN,IF BOX,AISI 4140 EA 1 BUSHING:WATER
BUSHING:WATER,5-1/2 X 5-7/8IN,30IN LG,26LB/FT,VAM TOP HT PIN,26.4LB/FT,VX57 BOX,GR 13CR L-80 EA 1 BUSHING:WATER
BUSHING:WATER,9-5/8 X 48IN LG,VAM TOP PIN,5-7/8IN,VX57 BOX,AISI 4140/4145,GR Q-125,53.5 X 26.30LB/FT EA 2 BUSHING:WATER
BUSHING:WATER,11-3/4 X 5-1/2IN,GR Q-125,65LB/FT,VAM SLIJ-II PIN X XT57 BOX EA 2 BUSHING:WATER
BUSHING:WATER,9-5/8IN,GR 4140-110,80.8LB/FT,TSH BLUE RISER PIN,6-5/8IN,62.81LB/FT,FH BOX,48IN OAL EA 2 BUSHING:WATER,
CAP,SUBSEA:EXTERNAL CORROSION,SS-15,F/ 27IN OD MANDREL,H4 PROFILE WELLHEAD,W/ API 17H ROV DUAL PORT HOT STAB RECEPTACLE & HANDLE,W/ANODE & PLUMBING F/ PRESERVATION FLUID,SPECIAL,F/ BP QUALITY PLAN Q445.01 EA 1 CAP,SUBSEA
CAP,SUBSEA:EXTERNAL CORROSION,SS-15,F/ 27IN OD MANDREL,H4 PROFILE WELLHEAD,W/ API 17H ROV DUAL PORT HOT STAB RECEPTACLE & HANDLE,W/ANODE & PLUMBING F/ PRESERVATION FLUID,SPECIAL,F/ BP QUALITY PLAN Q445.01 EA 7 CAP,SUBSEA
CAP:TEST,9-5/8 X 35IN LG,80.8LB/FT,TSH BLUE RISER BOX,W/ PADEYE 25TON SWL,125KSI YIELD,17200PSI BURST EA 2 CAP:TEST
HANGER,CASING:POSITIVE STOP,16IN CASING,96LB/FT,HYDRIL 511 THD PIN DOWN,16IN PUP JOINT,BIG BORE II-H TYPE SS-20/SS-15,8000PSI,4M LG,14.8IN MIN ID,RATED F/ 1 MILLION LBS EA 4 CASING HANGER
HANGER,CASING:BIG BORE II-H POSITIVE STOP,16IN,14.8IN CASING,97LB/FT,HYDRIL 511,WEIGHT SET SEAL,API MTL CL AA,PSL 3,TEMP CL V,TYPE SS-20/SS-15,8000PSI,35 TO 300DEG F,SPECIAL,14-3/4IN DRIFT,RATED F/ 1MM LB CASING,4 SHOULDE LOCK-RING EA 1 CASING HANGER
PUP JOINT,CASING:7IN OD,26LB/FT,2.5M LG,GR 13CRL80,VAM TOP HT BOX X PIN EA 1 CASING PUP JOINTS
PUP JOINT,CASING:7IN OD,26LB/FT,5.5M LG,GR 13CR-L80,VAM TOP HT BOX X PIN EA 16 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,6M,Q-125,HYDRIL 513 PIN X BOX EA 4 CASING PUP JOINTS P X B
PUP JOINT,CASING:11-3/4IN,65LB/FT,6M,P-110,VAM SLIJ-II PIN X BOX EA 3 CASING PUP JOINTS P X B
PUP JOINT,CASING:11-3/4IN,65LB/FT,4M,P-110,VAM SLIJ-II PIN X BOX EA 3 CASING PUP JOINTS P X B
PUP JOINT,CASING:7IN OD,26LB/FT,6M LG,GR 13CRL80,VAM TOP HT BOX X PIN EA 7 CASING PUP JOINTS P X B
PUP JOINT,CASING:7-5/8IN,39LB/FT,6M,Q-125,VAM SLIJ-II PIN X BOX EA 4 CASING PUP JOINTS P X B
PUP JOINT,CASING:7-5/8IN,39LB/FT,4M,Q-125,VAM SLIJ-II PIN X BOX EA 4 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,4M,Q-125,HYDRIL 513 PIN X BOX EA 2 CASING PUP JOINTS P X B
PUP JOINT,CASING:7-5/8IN,39LB/FT,2M,Q-125,VAM SLIJ-II PIN X BOX EA 4 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,6M,Q-125,HYDRIL 513 PIN X BOX EA 1 CASING PUP JOINTS P X B
PUP JOINT,CASING:7IN,35LB/FT,10FT,Q-125,VAM SLIJ-II PIN X BOX EA 2 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,2M,Q-125,HYDRIL 513 PIN X BOX EA 2 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,2M,Q-125,HYDRIL 513 PIN X BOX EA 2 CASING PUP JOINTS P X B
PUP JOINT,CASING:16IN,96LB/FT,4M,Q-125,HYDRIL 513 PIN X BOX EA 1 CASING PUP JOINTS P X B
PUP JOINT,CASING:11-3/4IN,65LB/FT,4M,P-110,VAM SLIJ-II PIN X BOX EA 1 CASING PUP JOINTS P X B
COUPLING,CASING:7IN,26LB/FT,VAM TOP HT,GR 13CRL80 EA 142 CASING,COUPLING
COUPLING,CASING:9-5/8IN,53.5LB/FT,VAM TOP REGULAR,GR Q-125,API 5CT EA 2 CASING,COUPLING
COUPLING,CASING:5-1/2IN,17LB/FT,VAM TOP HT,GR 13CRL80 EA 2 CASING,COUPLING
CASING:WASH PIPE,5-1/2IN OD,20LB/FT,TSH W511 BOX X PIN,GR P-110,R2 JO 17 CASING:WASH PIPE
PLUG,CEMENTING:13-3/8 TO 14IN OD,SSR,NON ROTATING,TOP & BOTTOM MID BORE PLUG EA 2 CEMENT PLUG
CENTRALIZER,CASING:BOW SPRING,14IN OD,SLIP-ON,17IN OPEN HOLE,ONE PIECE NON-HINGED,17IN DRIFT ID,EXPAND-O-LIZER SS EA 1 CENTRALIZER
COLLAR,STOP:SLIP ON,10IN,HEAVY DUTY STL,ONE PIECE NON-HINGED W/ GRUB SCREW,10-5/8IN ID DRIFT,12-1/4IN OPEN HOLE,SPIR-O-LOK EA 4 CENTRALIZER STOP COLLAR
CENTRALIZER,CASING:BOW SPRING,7-5/8IN OD,SLIP-ON,9-1/2IN OPEN HOLE,NON WELDED,17.6IN LG,CENTEK UROS EA 60 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,13-5/8IN OD CASING,EXPAND-O-LIZER SS,SPRING STL,SLIP-ON,17IN OPEN HOLE,1-PIECE NON-HINGED,8 NON-WELDED BOWS BLADE,16IN MIN COMPRESSED OD EA 22 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,14IN OD,SLIP-ON,SS,16-1/2IIN OPEN HOLE,ONE PIECE NON-HINGED,EXPAND-O-LIZER EA 20 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,14IN,SLIP ON,112.89LB/FT,SM125S,SLIJ-II,CS,17IN OPEN HOLE,ONE PIECE NON-HINGED,14-3/4IN ID DRIFT,EXPAND-O-LIZER URS EA 5 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,9-5/8IN OD,SLIP-ON,12-1/4IN OPEN HOLE,ONE PIECE NON-HINGED,12-1/4IN DRIFT ID,EXPAND-O-LIZER EA 8 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,13-3/8IN OD CASING,EXPAND-O-LIZER SS,SPRING STL,SLIP-ON,17IN OPEN HOLE,1-PIECE NON-HINGED,8 NON-WELDED BOWS BLADE,16IN MIN COMPRESSED OD EA 9 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,14IN,SLIP ON,112.89LB/FT,SM125S,SLIJ-II,CS,17IN OPEN HOLE,ONE PIECE NON-HINGED,14-3/4IN ID DRIFT,EXPAND-O-LIZER URS EA 4 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,7-5/8IN OD,SLIP-ON,9-1/2IN OPEN HOLE,NON WELDED,17.6IN LG,CENTEK UROS EA 4 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,13-5/8IN OD CASING,EXPAND-O-LIZER SS,SPRING STL,SLIP-ON,17IN OPEN HOLE,1-PIECE NON-HINGED,8 NON-WELDED BOWS BLADE,16IN MIN COMPRESSED OD EA 2 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,7-5/8IN OD,SLIP-ON,9-1/2IN OPEN HOLE,NON WELDED,17.6IN LG,CENTEK UROS EA 1 CENTRALIZER,CASING
CENTRALIZER,CASING:BOW SPRING,7-5/8IN OD,SLIP-ON,10-3/4IN OPEN HOLE,21.4IN LG,NON WELDED,EXPAND-O-LIZER UROS,W/ STD SLIP-ON STOP COLLAR EA 14 CENTRALIZER,CASING:BOW SPRING
CENTRALIZER,CASING:BOW SPRING,7-5/8IN OD,SLIP-ON,SS,8-1/2IN OPEN HOLE,ONE PIECE NON-HINGED,8.225IN OD MIN UNCOMPRESSED,11.81IN LG,(6) NON WELDED BOWS BLADE,EXPAND-O-LIZER EA 24 CENTRALIZER,CASING:BOW SPRING
CHEMICAL:TEKPLUG XL HD,LIQUID,WHITE/OFF-WHITE,MILD,7 TO 9PH GAL 5416 CHEMICAL
ACID:ACETIC,56PCT,55GAL PLASTIC DRUM,ORGANIC GAL 11354 CHEMICAL
CHEMICAL:CERAMIC PROPPANT,ECONOPROP,3000LB JUMBO BAG,30/50 SIZE,LIGHTWEIGHT LB 50993 CHEMICAL
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X 6-5/8IN,VAM TOP HT,26 X 32LB/FT,F/ 9-5/8IN 47LB/FT CASING EA 9 CLAMP
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X 7IN,VAM TOP HT,26 X 38LB/FT,F/ 14IN 112.89LB/FT CASING EA 5 CLAMP
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X 7IN,VAM TOP HT,26 X 38LB/FT,F/ 14IN 112.89LB/FT CASING EA 2 CLAMP
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X 6-5/8IN,VAM TOP HT,26 X 32LB/FT,F/ 9-5/8IN 47LB/FT CASING EA 2 CLAMP
COLLAR:CFLEX SS,13-5/8IN,88.2LB,13-3/8IN 72LB VAM 21,4140 125KSI EA 1 COLLAR
COLLAR,FLOAT:7-5/8IN OD,47.1LB/FT,GR P-110,VAM FJL BOX X PIN,MODEL M45AP EA 1 COLLAR,FLT
COLLAR,LANDING:7-5/8IN OD,47.1LB/FT,VAM FJL BOX X PIN,GR P-110,MODEL WLCD EA 1 COLLAR,LANDING
COLLAR,LANDING:16IN,97FTLB,VAM SLIJ-II BOX X PIN,GR Q-125 EA 1 COLLAR,LANDING
COLLAR,STOP:SLIP ON,7-5/8IN,SOCKET SET SCREW AND SQ END,COLLAR ID 7.80IN,ONE PIECE EA 50 COLLAR,STOP
COLLAR,STOP:SLIP-ON,7IN,ONE PIECE,STL,NON-HINGED,W/ GRUB SCREW,F/ CON-O-GLIDER EA 56 COLLAR,STOP
COLLAR,STOP:SLIP ON,7-5/8IN,SOCKET SET SCREW AND SQ END,COLLAR ID 7.80IN,ONE PIECE EA 22 COLLAR,STOP
COLLAR,STOP:SLIP-ON,13-3/8IN,NON-HINGED 1-PIECE,HEAVY DUTY STL,W/ GRUB SCREW,SPIR-O-LOK EA 19 COLLAR,STOP
COLLAR,STOP:SLIP-ON,9-5/8IN,HEAVY DUTY STL,ONE PIECE NON-HINGED W/ GRUB SCREW,12-1/4IN DRIFT ID,12-1/4IN OPEN HOLE,SPIR-O-LOK EA 15 COLLAR,STOP
COLLAR,STOP:SLIP-ON,20IN,HEAVY DUTY STL,ONE PIECE NON-HINGED W/ GRUB SCREW,26IN DRIFT ID,26IN OPEN HOLE,SPIR-O-LOK EA 9 COLLAR,STOP
COLLAR,STOP:SLIP-ON,7IN,ONE PIECE,STL,NON-HINGED,W/ GRUB SCREW,F/ CON-O-GLIDER EA 2 COLLAR,STOP
ADAPTER:WIRE LINE SHOOTING NIPPLE,4-1/2IN EA 1 COMPLETION EQUIPMENT
CROSSOVER,CASING: GR SM125S,14IN OD,115LB,VAM SLIJ-II BOX TOP,14IN OD,114LB,VAM TOP KB BOX BTM,8M LG EA 1 CONDUCTOR,OCTG
CONNECTOR:SPLICE ASSEMBLY,3/4IN OD,TYPE EDMC-R,REPAIR KIT EA 8 CONNECTOR
CONNECTOR:SPLICE ASSEMBLY,3/4IN OD,TYPE EDMC-R,REPAIR KIT EA 4 CONNECTOR
CONNECTOR,COMMUNICATIONS:A70 DRY MATE DOWNHOLE PLUG EA 2 CONNECTOR
CONNECTOR:QUICK CONNECT,7IN,7.812IN OD,5.995IN ID,VAM TOP HT BOX X PIN,13CR L80,26LB/FT,BMS-S210,VITON ELASTOMERS EA 2 CONNECTOR
CONNECTOR,COMMUNICATIONS:A70 DRY MATE DOWNHOLE PLUG EA 1 CONNECTOR
CONNECTOR:MULTI-THREAD D-90/MT PIN,36IN OD,W/ 1.500IN WALL BUTTWELD PREP,W/ PROTECTOR AND ANTI-ROTATION KEYS EA 1 CONNECTOR
COUPLING,CASING:8.206 ID X 10.907IN OD,119.8LB/FT,TSH BLUE RISER,GR C-110,API 5CT EA 8 COUPLING
COUPLING,CASING:8.206 ID X 10.907IN OD,119.8LB/FT,TSH BLUE RISER,GR C-110,API 5CT EA 8 COUPLING
COUPLING,CASING:8.206 ID X 10.907IN OD,119.8LB/FT,TSH BLUE RISER,GR C-110,API 5CT EA 6 COUPLING
COUPLING,CASING:6-5/8IN OD,32LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 172 COUPLING,CASING
COUPLING,CASING:6-5/8IN OD,32LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 84 COUPLING,CASING
COUPLING,CASING:7-5/8IN OD,39LB/FT,VAM TOP,GR Q-125 EA 50 COUPLING,CASING
COUPLING,CASING:5-1/2IN OD,26LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 39 COUPLING,CASING
COUPLING,CASING:7IN OD,38LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 31 COUPLING,CASING
COUPLING,CASING:7IN OD,38LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 26 COUPLING,CASING
COUPLING,CASING:5-1/2IN OD,26LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 19 COUPLING,CASING
COUPLING,CASING:5IN OD,18LB/FT,VAM TOP HT,GR SM13CRS-110 EA 4 COUPLING,CASING
COUPLING,CASING:7IN OD,38LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 5 COUPLING,CASING
COUPLING,CASING:7IN OD,38LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 7 COUPLING,CASING
COUPLING,CASING:6-5/8IN OD,32LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 1 COUPLING,CASING
COUPLING,CASING:5-1/2IN OD,26LB/FT,VAM TOP HT BOX X BOX,GR SM13CRS-110 EA 5 COUPLING,CASING
CROSSOVER,CASING:GR Q-125,14IN OD,115LB/FT,VAM SLIJ-II BOX TOP,9-7/8IN OD,62.8LB/FT,SL-SF PIN BOT,3M LG,0.812IN WT EA 2 CROSSOVER,CASING
CROSSOVER,CASING:X-80,22 OD X 1IN WT,224.49LB/FT,XLW BOX TOP,VIPER-3ST PIN BOT,SAW,R3,API 5L,PSL-2,W/ THD PROTECTOR EA 1 CROSSOVER,CASING
CROSSOVER,CASING:SM125S,14IN,112.89LB/FT,VAM SLIJ-II TOP,0.8IN WT,92.5PCT SPECIAL WT TOLERANCE W/ CROSSOVER,Q-125,14IN,112.89LB/FT,VAM SLIJ-II BOX TOP,13-3/8IN,72LB/FT,TH513 PIN BOTTOM,51IN OAL,R3 LG EA 1 CROSSOVER,CASING
CASING,OCTG:10-3/4IN OD,45.5LB/FT,GR L-80,VAM TOP PIN X PIN,R3,SMLS JO 8 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,5-1/2IN OD,26LB/FT,VAM TOP HT BOX TOP,5IN OD,15LB/FT,VAM TOP HT PIN BOT,42IN LG, OR- 3IN LG TOLERANCE,4.283IN SPECIAL DRIFT EA 5 CROSSOVER,CASING
CROSSOVER,CASING:GR SM13CRS-110,7IN OD,38LB/FT,VAM TOP HT BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,1.5M LG EA 6 CROSSOVER,CASING
CROSSOVER,CASING:13CR 80 MYS 22 HRC MAX,7-5/8IN,29.7LB/FT,HUNTING BOSS SC BOX TOP,7IN,29LB/FT,SLHT PIN BOT,SUB,BMS-S210,BCS-A503 BCS-A103 BAKERTRON II SILVER PALLADIUM NON-CRITICAL W/ ADDED LG F/ (2) THD RECUT ON EA END EA 3 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,6-5/8IN OD,32LB/FT,VAM TOP HT BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,44.8IN LG, OR- 3IN LG TOLERANCE EA 4 CROSSOVER,CASING
CROSSOVER,CASING:GR SM13CRS-110,7-5/8IN OD,33.7LB/FT,HUNTING BOSS SC BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,1M LG EA 2 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,7-5/8IN OD,26.4LB/FT,VAM FJL PIN TOP,5-1/2IN OD,26LB/FT,VAM TOP HT BOX BOT,41IN LG, OR- 3IN LG TOLERANCE EA 2 CROSSOVER,CASING
CROSSOVER,CASING:GR SM125S,14IN OD,115LB/FT,VAM SLIJ-II PIN TOP,14IN OD,114LB/FT,VAM TOP KB PIN BOT,3M LG,0.812IN WT EA 3 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,7-5/8IN,47.1LB,VAM FJL BOX TOP,7-5/8IN,26.4LB,VAM FJL PIN BTM,R3 LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,5-1/2IN OD,17LB/FT,VAM FJL BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,37.3IN LG, OR- 3IN LG TOLERANCE EA 2 CROSSOVER,CASING
CROSSOVER,CASING:Q-125,11-7/8IN,71.8LB/FT,TSH 523 BOX TOP,9-5/8IN,47LB/FT,VAM SLIJ-II PIN BOT,54IN LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR SM125S,14IN OD,115LB/FT,VAM SLIJ-II BOX TOP,14IN OD,112.6LB/FT,VAM SLIJ-II PIN BOT,8.5M LG,0.812 X 0.8IN WT EA 1 CROSSOVER,CASING
CROSSOVER,CASING:Q-125,11-7/8IN,71.8LB/FT,VAM SLIJ-II BOX TOP,11-3/4IN,65LB/FT,VAM SLIJ-II PIN BOT,48IN LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,5IN OD,15LB/FT,VAM TOP HT BOX TOP,4-1/2IN OD,11.6LB/FT,VAM TOP PIN BOT,40.4IN LG, OR- 3IN LG TOLERANCE,3-7/8IN SPECIAL DRIFT EA 5 CROSSOVER,CASING
CROSSOVER,CASING: 14IN,114,14IN,115,3M LG,SM125TT,VAM TOP KB TOP,VAM SLIJ-II PIN BTM EA 2 CROSSOVER,CASING
CROSSOVER,CASING:GR Q-125,7-5/8IN OD,47.1LB/FT,VAM FJL BOX TOP,7-5/8IN OD,39LB/FT,VAM SLIJ-II PIN DOWN BOT,R3 LG EA 2 CROSSOVER,CASING
CROSSOVER,CASING:Q-125,11-7/8IN,71.8LB/FT,VAM SLIJ-II BOX TOP,11-3/4IN,65LB/FT,VAM SLIJ-II PIN BOT,48IN LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR SM13CRS-110,7IN OD,38LB/FT,VAM TOP HT BOX TOP,6-5/8IN OD,32LB/FT,VAM TOP HT PIN BOT,1.6M LG EA 3 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,7IN OD,38LB/FT,VAM TOP HT BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,47IN LG, OR- 3IN LG TOLERANCE EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,6-5/8IN OD,32LB/FT,VAM TOP HT BOX TOP,5-1/2IN OD,26LB/FT,VAM TOP HT PIN BOT,44.8IN LG, OR- 3IN LG TOLERANCE EA 1 CROSSOVER,CASING
CROSSOVER,CASING:P-110,16IN,97LB/FT,HYDRIL 513 BOX TOP,16IN,97LB/FT,HYDRIL 511 PIN BOT,4M LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR 13CRS-110,5-1/2IN OD,26LB/FT,VAM HT BOX TOP,5IN OD,18LB/FT,VAM HT PIN BOT,38IN LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING: GR SM125S,14IN OD,114LB,VAM TOP KB BOX TOP,14IN OD,115LB,VAM SLIJ-II PIN BTM,4M LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR SM125S,14IN OD,115LB/FT,VAM SLIJ-II PIN TOP,14IN OD,114LB/FT,VAM TOP KB PIN BOT,3M LG,0.812IN WT EA 1 CROSSOVER,CASING
CROSSOVER,CASING:P-110,16IN,97LB/FT,HYDRIL 511 BOX TOP,16IN,97LB/FT,HYDRIL 513 PIN BOT,3M LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR SM13CRS-110,5-1/2IN OD,26LB/FT,VAM FJL BOX TOP,5-1/2IN OD,26LB/FT,NATIONAL PIN BOT,R3 EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR Q-125,7-5/8IN OD,39LB/FT,VAM SLIJ-II BOX TOP,7-5/8IN OD,47.1LB/FT,VAM FJL PIN DOWN BOT,R3 LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING: 7-5/8,39,Q125,VAM SLIJ II BOX,7-5/8,39,Q125,CUT OFF PIN,20 LG EA 2 CROSSOVER,CASING
CROSSOVER,CASING:GR P-110,11-3/4IN TOP,65LB/FT,SL-SF BOX TOP,11-3/4IN BOTTOM,65LB/FT,VAM SLIJ II PIN BOT,R3 LG EA 3 CROSSOVER,CASING
CROSSOVER,CASING:GR P-110,11-3/4IN OD,65LB/FT,SLSF BOX TOP,11-3/4IN OD,65LB/FT,VAM SLIJ-II PIN BOT,60CM LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR T95,14IN OD,106LB/FT,VAM TOP KB PIN TOP,14IN OD,112.89LB/FT,VAM SLIJ- II PIN BOT,3M LG,0.8IN WT EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR SM125S,14IN TOP,115LB/FT,VAM SLIJ-II BOX TOP,13-5/8IN BOTTOM,88.2LB/FT,HYDRIL SLX PIN BOT,R3 JO 1 CROSSOVER,CASING
CROSSOVER,CASING:Q-125,13-5/8IN,88.2LB/FT,VAM SLIJ-II BOX TOP,13-5/8IN,88.2LB/FT,HYDRIL SLX PIN BOTTOM,4M LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR P-110,16IN,84LB,TSH 521 BOX TOP,16IN,97LB,VAM BOLT PIN BTM,2M LG EA 1 CROSSOVER,CASING
CROSSOVER,CASING:GR Q-125,7-5/8IN OD,47.1LB/FT,VAM FJL BOX TOP,7-5/8IN OD,52.8LB/FT,MAC II PIN BOT,2M LG EA 1 CROSSOVER,CSG
CROSSOVER,TUBING:GR 13CR L-80,5-1/2IN,17LB/FT,VAM TOP HT BOX,5-1/2IN,17LB/FT,FOX PIN BOT,2M LG EA 1 CROSSOVER,TUBING
DART:TOP,SSR,F/ DP SIZE 5 TO 5-7/8IN,LAUNCH,SMALL BORE EA 1 DART
DART:BOTTOM,SSR,F/ DP SIZE 5 TO 5-7/8IN,LAUNCH,SMALL BORE EA 1 DART
DART:TOP,SSR,F/ DP SIZE 5 TO 5-7/8IN,LAUNCH,SMALL BORE EA 1 DART
DART:BOTTOM,SSR,F/ DP SIZE 5 TO 5-7/8IN,LAUNCH,SMALL BORE EA 1 DART
DEVICE,FLUID LOSS CONTROL:4.525 ID X 8.015IN OD,5-1/2IN 17LB/FT VAM TOP HT,212.64IN LG,13CR HOUSING,TYPE FS2-M,INCONEL 925 BALL,FLUROCARBON RBR,39 TO 325DEG F EA 1 DEVICE
PROTECTOR:BORE,SS-15,18-3/4IN,SS,TYPE SS-20/SS-15 ,F/ 17.50IN DRIFT,W/ 17.644IN MIN ID,BBII/BBII-H WELLHD HOUSING W/O SECONDARY LOCKDOWN PROFILE,W/ J SLOTS,F/ MPT,SPECIAL,F/ BP QUALITY PLAN Q445.01,API 17D EA 3 DQ BORE PROTECOR
HANGER,CASING:BIG BORE II-H POSITIVE STOP,16IN CASING,96LB/FT,HYDRIL 513 THD PIN DOWN,16IN PUP JOINT EA 1 DQ CASING HANGER
PLUG,PIPE:BLANKING,4IN,ASTM A105,NPT,XYLAN COATED,SOLID SQUARE HD,SPECIAL EA 17 DQ PLUG,PIPE
SEAL,ASSEMBLY:METAL TO METAL,SS-15 BIG BORE II-H WELLHEAD,16IN,WEIGHT SET,SS-20 BIG BORE II-H WELLHEAD,5000-10000PSI,API 6A,AA,PSL-3,35-300DEG F,F/ 16IN BB IL-H SUPPLEMENTAL CASING HANGER,SPECIAL,RATED F/ 1.2 MM LB,LOCKDOWN EA 2 DQ SEAL ASSY.
SEAL:ASSEMBLY,18-3/4",WEIGHT SET OUTER LOCK-RING,SS-20/SS-15 WELLHEAD,BIG BORE II-H,EMERGENCY,V,DD,PSL-3,F/ H2S,20000PSI ABOVE/15000PSI BELOW,F/ ALL HANGER 14" & SMALLER EA 1 DQ SEAL ASSY.
SEAL,ASSEMBLY:BIG BORE II-H,METAL TO METAL,SS-15,18.75IN,HIGH PR/HIGH TEMP,BR STYLE,DD,PSL-3,10000-15000 PSI,F/H2S,14IN & SMALLER HANGER,W/PREP F/OUTER LOCK-RING,SPECIAL,850 KIPS LOCKDOWN CAPACITY EA 1 DQ SEAL ASSY.
SEAL,ASSEMBLY:EMERGENCY,16",BIG BORE II-H,TYPE SS-20/SS-15,10000 PSI,F/ 16" BIG BORE II-H SUPPLEMENTAL CASING HANGER,WEIGHT SET SEAL,API 6A,AA,PSL 3,TEMP 35-250 DEG F,1.2 MILLION LOCK-DOWN CAPACITY,MADE FROM 85KSI MIN YIELD 8630 MATERIAL,W/ WEEP HOLE,BP QUALITY PLAN Q445.01 EA 1 DQ SEAL,ASSY
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4" X 15-1/4",14.8" MIN ID BORE X 14.75" DRIFT, W/MULTIPLE RUNNING & RETRIEVING SUBS,SELECTIVE RETRIEVAL EA 1 DQ WEAR BUSHING
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4" X 13-5/8",SS-20 BIG BORE II-H WELLHEAD,W/MULTIPLE RUNNING & RETRIEVAL SUBS,SPECIAL,BIT RUNNABLE SELECTIVE RETRIEVAL EA 1 DQ WEAR BUSHING
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4" X 13-5/8",SS-20 BIG BORE II-H WELLHEAD,W/MULTIPLE RUNNING & RETRIEVAL SUBS,SPECIAL,BIT RUNNABLE SELECTIVE RETRIEVAL EA 2 DQ WEAR BUSHING
BUSHING,SUBSEA:WEAR,SS-15 BIG BORE II-H WELLHEAD,18-3/4" X 13-5/8",SS-20 BIG BORE II-H WELLHEAD,W/MULTIPLE RUNNING & RETRIEVAL SUBS,SPECIAL,BIT RUNNABLE SELECTIVE RETRIEVAL EA 3 DQ WEAR BUSHING
SLEEVE,SUBSEA:WEAR,18 X 16IN,SS-20/SS-15 BIG BORE II-H,3 HELICAL BLADE,W/16IN WEAR SLEEVE RUNNING & RETRIEVING BIT SUBS,SPECIAL BOPTEST TOOL ADAPTER,13.97IN MIN ID EA 2 DQ WEAR SLEEVE
ELEVATOR:SINGLE JOINT,5-1/2IN OD,STABBERLESS,5 TO 18 DEG CHAM IEU-18 EA 2 ELEVATOR
SCREEN,COMPLETION:SAND,PREMIUM MESH,150MICRON,6.44IN OD,SS GR 316L,GR L80,PIPE SZ 5-1/2IN,VAM TOP HT BOX X PIN,17LB/FT,13CR,R3 LG,180MICRON CUT PT,MESHSLOT XL EA 72 EX. SAND SCREEN
SCREEN,COMPLETION:SAND,PREMIUM MESH,175 MICRON,316L SS DUTCH WEAVE,GR 13CR L80,PIPE SZ 5-1/2IN,VAM TOP HT BOX X PIN,17LB/FT,SHROUDED,W/ (6) BLADE 8.4IN OD CENTRALIZER BOTH MID-JOINT & PIN END,33 TO 34FT LG,24IN HANDLING AREA ON BOTH END EA 1 EX. SAND SCREEN
EXTENSION:GRAVEL PACK 98-60,7-5/8 X 7IN,33.7 X 29LB/FT,HUNTING BOSS PIN UP,GR SUPER 13CR-110,VAM TOP HT PIN DOWN,BMS-S230 MYS 32 HRC MAX,W/ 3RD INDICATOR COUPLING & ADDITIONAL THD RECUT ON BOTTOM EA 1 EXTENSION:GRAVEL
EXTENSION:GRAVEL PACK,198 TO 60,29.7LB/FT,7-5/8IN HUNTING BOSS PIN UP,CS,7IN,26LB/FT,VAM TOP HT PIN DOWN,13CR 80KSI,BMS-S210 13 CR 80 MYS 22 HRC MAX EA 2 EXTENSION:GRAVEL PACK
TOOL,SUBSEA:INTERFACE,SLIMBORE H4 CONNECTOR TEST FIXTURE ASSY EA 1 FMC TOOL
FRAME,SUBSEA:FALSE ROTARY TABLE,14 WD X 24 LG X 40IN HT,7TON SWL,F/ RUNNING WASH PIPE,50MM THK TOP PLATE,W/ 6 X 8IN KEY SLOT,150 X 100 X 10MM BOX IRON,W/ (2) SWIVEL EYE BOLT,10000PSI CARRYING CAPABILITY EA 1 FRAME,SUBSEA
FUNNEL,SUBSEA:GUIDE,10-3/4IN OD,ARTELON,10.122IN ID,30IN LG,45.5LB/FT,VAM TOP PIN UP RE-ENTRY EA 1 FUNNEL,SUBSEA:GUIDE
PLUG:RETRIEVABLE BRIDGE,13-3/8IN,GTV LOK-SET,F/ 12.205 MIN X 12.594IN MAX CASING ID,5000PSI WP ABOVE,5000PSI WP BELOW,40 TO 250DEG F WORKING TEMP,90-80-90 PACKING ELEMENT,BPS-D401 (HNBR90-80-90) NIT,12.125IN OD GAGE RING,3.56IN OD PACKING ELEMENT,3.58IN OD ELEMENT SPACER,6000LBS MIN SET DOWN WEIGHT,1/2 MULESHOE BLANK EA 1 GTV PLUG, BAKER
PLUG:RETRIEVABLE BRIDGE,8.218IN OD GA RING,GT LOK-SET,51A2 TOOL SIZE,9-5/8IN OD 47 TO 53.5LB/FT NC50 MOD PIN DOWN CASING,BPS-D101 (H901-H700-H901) NIT EA 1 GTV PLUG, BAKER
GUN,PERFORATING:TUBING CONVEYED,7IN OD,20FT LG,10000PSI MAX,BLANK GUN M 120 GUN,PERFORATING
HANGER,CASING:BIG BORE II-H POSITIVE STOP,16IN CASING,96LB/FT,HYDRIL 513 THD PIN DOWN,W/ 16IN PUP JOINT EA 1 HANGER,CASING
HANGER,CASING:BIG BORE II-H,12.275 ID X 18-3/4IN,14IN,114LB/FT,VAM TOP KB BOX,15000PSI,API 17D,API MTL CLAA,PSLPSL 3,35-350DEG F,HIGH LOAD/HIGH TEMPERATURE/INCREASED SEAL INTERFERENCE EA 1 HANGER,CASING
HANGER,CASING:POSITIVE STOP,BIG BORE II-H,16.6IN ID,18IN,117LB/FT,HYDRIL 511 BOX,5000PSI,API MTL CLAA,PSLPSL 3,TEMP CLV,STANDARD SERVICE EA 1 HANGER,CASING
JOINT,SAFETY:6-1/4IN OD,4.95IN ID,5-1/2IN VAM TOP HT BOX X PIN,17LB/FT,SHEAR OUT,13CR 80KSI,GPR-24 BMS-S210 13 CR 80 MYS 22 HRC MAXW/ ADDED LG F/ 2 THD RECUT ON EA END EA 1 JOINT,SFTY
KIT:REDRESS,SOFT,F/ 9-5/8IN GATE VALVE BRIDGE PLUG EA 3 KIT
KIT,SEAL:REDRESS,BLANKING PLUG,4-1/8IN,AOFM TOP NOGO,KV-65 PACKING EA 10 KIT ,SEAL
KIT,SEAL:REDRESS,EQUALIZING CHECK VALVE,4-1/8IN,AOFT MODEL EA 10 KIT SEAL 
KIT,SEAL:REDRESS,EQUALIZING CHECK VALVE,4-1/8IN,AOFT MODEL EA 3 KIT SEAL 
LINE,SUBSEA CONTROL:SINGLE TUBING ENCAPSULATED,1/4IN OD,0.035IN WT,INCOLOY 825,18 AWG COND,PP ENCAP,YELLOW,7 STR CONDUCTOR,ETFE INSULATION,11 X 11MM M 11780 LINE,SUBSEA
LINE,SUBSEA CONTROL:SINGLE TUBING ENCAPSULATED,1/4IN OD,0.035IN WT,INCOLOY 825,18 AWG COND,PP ENCAP,YELLOW,7 STR CONDUCTOR,ETFE INSULATION,11 X 11MM M 4917 LINE,SUBSEA
LINE,SUBSEA CONTROL:SINGLE TUBING ENCAPSULATED,1/4IN OD,0.035IN WT,INCOLOY 825,18 AWG COND,PP ENCAP,YELLOW,7 STR CONDUCTOR,ETFE INSULATION,11 X 11MM M 4500 LINE,SUBSEA
LINE:CHEMICAL INJECTION,1/4 OD X 0.049IN WT,SGL ENCAPSULATED ALLOY 825 WELDED & DRAWN ANNEALED TUBE,11 X 11MM BLUE TT270 FLUOROPOLYMER,F/ MAX 280DEG F HYDROCARBAN SERVICE,SUPPLIED CONTINUOS LG OF 4500M M 9000 LINE:CHEMICAL INJECTION
HANGER,CASING:LOCKDOWN SLEEVE,9.923IN MIN ID,18-3/4IN CASING,API 17D,API MTL CL DD,PSL 3,TYPE SS-15,15000PSI,GEN II LDS,9.875IN DRIFT,35 TO 300DEG F,F/ H2S,W/ PROFILE FOR PRODUCTION CONNECTOR STAB SUB AND INCONEL INLAY IN STAB SUB SEAL AREA,RATED TO 3.2 MILLION LBS,BP QUALITY PLAN: Q445.01 EA 1 LOCKDOWN SLEEVE
HANGER,CASING:LOCKDOWN SLEEVE,9.923IN MIN ID,18-3/4IN CASING,API 17D,API MTL CL DD,PSL 3,TYPE SS-15,15000PSI,GEN II LDS,9.875IN DRIFT,35 TO 300DEG F,F/ H2S,W/ PROFILE FOR PRODUCTION CONNECTOR STAB SUB AND INCONEL INLAY IN STAB SUB SEAL AREA,RATED TO 3.2 MILLION LBS,BP QUALITY PLAN: Q445.01 EA 1 LOCKDOWN SLEEVE
MANDREL:SINGLE GAUGE,5-1/2IN,13CR,PERMANENT,26,SGM ASSY,XPQG/NPQG/NHQG/NMQG,TUBING,VAM TOP HT,PXP,GR 110,QCP-101680009 EA 1 MANDREL
MANDREL,CHEMICAL INJECTION:5-1/2IN,26LB/FT,INCONEL 718-120KSI,32 TO 40 HRC 2.6IN DP VAM TOP HT TUBING PORT X .69IN WD BYPASS SLOTS PIN X PIN,12IN,SURETREAT,BLOCK VALVE EA 2 MANDREL,CHEMICAL INJECTION
MILL:3.725IN OD,2.375IN PAC DSI PIN UP,INCONEL 718 ORBIT BALL,W/ NOGO CENTRALIZER EA 3 MILL
JOINT:MINI TELESCOPIC,(2) PACKER SEAL KIT,(48) 1-5/8IN BOLT,(96) 1-5/8IN NUT,(48) 2IN BOLT,(96) 2IN NUT,(2) R73 GASKET,(2) BX-165 GASKET,(1) PAD EYE 21-1/4IN 2000LB FLG 13.5 TON,(1) PAD EYE 21-1/4IN 5000LB FLG 13.5 TON,MD EA 1 MPD
JOINT:MINI TELESCOPIC EA 1 MPD
NIPPLE,SEATING:TOP NO-GO NON-PORTED,5-1/2IN,6.303IN OD,4.125IN ID,36IN LG,VAM TOP HT BOX UP X PIN DOWN,BMS-S230 GR 13CR,26LB/FT,4-1/8IN AOF PROFILE,110KSI MIN YIELD STRENGTH,32 HRC MAX,W/ THD RECUT AT EA END EA 1 NIPPLE,SEATING
PACKER,PRODUCTION:LINER,9-7/8IN,67.5LB/FT,VAM TOP BOX DOWN,13-3/8IN CSG,61 TO 72LB/FT,C-110,W/ HRD PROFILE AND HOLD DOWN,10.188 EXTID X 11.75IN EXT OD X 20FT EXT LG,API 5CT,PBR EXT TYPE,8.535 ID X 12IN OD MUST DRIFT 8.5IN,5PCT SHEAR SCREW,8.535 PACKOFF DIA EA 1 PACKER
PACKER,DRILL:SLIDING VALVE,FAS,9-5/8IN,7-3/4IN NOM OD,COMPOSITE,52.58IN LG,5000PSI EA 1 PACKER,DRILL
PACKER,PRODUCTION:GRAVEL PACK,SC-2R,9-5/8 X 7-5/8IN,47 X 33.7LB/FT,THD BOX X HUNTING BOSS SC BOX,6-1/2IN CSG,HNBR,96B2-60,LH SQ,90 DUROMETER,PE BMS-S230 SUPER 13CR 110 MYS 32 HRC MAX,FLOW WETTED,BMS-N201 NICKEL ALLOY 120 MYS BODY COLLET LOWER CONE & BTM SUB EA 2 PACKER,PRODUCTION
PACKER,PRODUCTION:GRAVEL PACK,SC-2R,9-5/8 X 7-5/8IN,47 X 33.7LB/FT,THD BOX X HUNTING BOSS SC BOX,6-1/2IN CSG,HNBR,96B2-60,LH SQ,90 DUROMETER,PE BMS-S230 SUPER 13CR 110 MYS 32 HRC MAX,FLOW WETTED,BMS-N201 NICKEL ALLOY 120 MYS BODY COLLET LOWER CONE & BTM SUB EA 1 PACKER,PRODUCTION
PACKER:GRAVEL PACK,RETRIEVABLE,7-5/8IN,29.7LB/FT,HUNTING BOSS BOX DOWN,9-5/8IN CSG,47LB/FT,13CR 80KSI,SIZE 96B2-60,HNBR ELEMENT,MODEL SC-2R,BMS-S210 13 CR 80 MYS 22 HRC MAX FLOW WETTED 13CR BTM SUB BMS-S210 C1 CRITICAL TO HSE EA 1 PACKER:GRAVEL PACK
PACKER:GRAVEL PACK,RETRIEVABLE,7-5/8IN,29.7LB/FT,HUNTING BOSS BOX DOWN,9-5/8IN CSG,47LB/FT,13CR 80KSI,SIZE 96B2-60,HNBR ELEMENT,MODEL SC-2R,BMS-S210 13 CR 80 MYS 22 HRC MAX FLOW WETTED 13CR BTM SUB BMS-S210 C1 CRITICAL TO HSE EA 1 PACKER:GRAVEL PACK
PACKER,DRILL:SQUEEZE,13-3/8IN CASING,EZ DRILL SVB EA 2 PCKR_DRILL
PLATE: POSITIVE LOCK,18-3/4IN,TYPE SS-15,W/ 2.1IN WD CAP,F/ 18-3/4IN RIGID LOCKDOWN WHH ACTUATOR SLEEVE SPECIAL,18-3/4IN WELLHEAD RETAINER RING EA 8 PLATE
PLATE: POSITIVE LOCK,18-3/4IN,TYPE SS-15,W/ 2.9IN WD CAP,F/ 18-3/4IN RIGID LOCKDOWN WHH ACTUATOR SLEEVE SPECIAL,18-3/4IN WELLHEAD RETAINER RING EA 8 PLATE
PLUG,BLANKING:TOP NO-GO,5.812IN,13CR-80 MYS,MODEL AOFM,BMSS210,5.88IN NO-GO OD,W/ PT-3 PACKING & EQUALIZING PORT EA 2 PLUG
PLUG,BLANKING:TOP NO-GO,4.562IN,BMSS210 13CR 80 MYS 22 HRC MAX,MODEL AOFM,AF PROFILE,4.64IN OD,BCS-A303 MOLYBDENUM SULFIDE DRY FILM,STD SERVICE,BPS-B201 V45 O-RING,BPS-C501 KV65 SEAL STACK,(2) 1/4IN EQUALIZING PORT,275DEG F WK,10000PSI WK EA 2 PLUG
PLUG: SOFT SEAL TEST,125KSI YIELD STRENGTH,7-5/8IN,VAM TOP PIN X 9/16INAUTO-CLAVE HP FEMALE,39LB/FT,0.5IN WT,F/ AUTOMOTIVE EA 1 PLUG
PLUG CEMENTING: NON-ROTATING,9-5/8IN OD,MID-BORE,LOW SHEAR 10000PSI BUMP,SSR TOP & BOTTOM,PDC DRILLABLE,SRMB0958LP EA 1 PLUG CEMENTING
PLUG,BLANKING:TOP NO-GO,4-1/8IN,BMS-S210,13CR,80KSI MIN YIELD STRENGTH,22 HRC MAX,4.2IN OD,AOFM MODEL,AF PROFILE,STD SERVICE,BPS-B201 (V45) O-RING BPS-C501 KV65 SEAL STACK,(2) 1/4IN EQUALIZING PORT,275DEG F WORKING,10000 WP EA 2 PLUG,BLANKING
PLUG,CEMENTING:NON ROTATING,7 TO 7-5/8IN OD,SUB-SURFACE RELEASE,HNBR,SMALL BORE LATCH-IN,F/ 7IN SYSTEM EA 1 PLUG,CEMENT
PLUG,PIPE:HANDLING,16IN,AISI 4140,TH513,96LB/FT EA 1 PLUG,PIPE
PLUG:LIFT NUBBIN,7-5/8IN OD,FULL RATED TYPE 3,9IN LG,29.7LB/FT,VAM SLIJ-II,GR P-110 EA 4 PLUG:LIFT NUBBIN
PLUG:LIFT NUBBIN,7-5/8IN OD,FULL RATED TYPE 3,9IN LG,29.7LB/FT,VAM SLIJ-II,GR P-110 EA 6 PLUG:LIFT NUBBIN
PLUG:LIFT NUBBIN,9-5/8IN OD,GR P-110,53.5LB/FT,TSHW513/523 PIN EA 4 PLUG:LIFT NUBBIN,
PLUG:TEST,9-5/8IN,35IN LG,80.8LB/FT,TSH BLUE RISER PIN,W/ PADEYE 25TON SWL,125KSI YIELD,17900PSI BURST EA 1 PLUG:TEST
POLISHED BORE RECEPTACLE:79.29LB/FT,10.38IN MAX OD,110000PSI MIN YIELD,VERSAFLEX,AISI 4340 LOW ALLOY STL,8-1/2IN SEAL BORE,9.689IN HST-LX BOX X 10-1/8IN,TSH 523 PIN,STD SERVICE,59V960293 EA 1 POLISHED BORE RECEPTACLE
PROTECTOR:CROSS COUPLING CABLE,6-5/8IN,(2) 11 X 11MM,ENCAPSULATED,ASSY,VAM TOP HT,8.346IN OD RUN INSIDE,8-1/2IN CASING DRIFT,26PPF EA 732 PROTECTOR
PROTECTOR:CROSS COUPLING CABLE,6-5/8IN,(2) 11 X 11MM,ENCAPSULATED,ASSY,VAM TOP HT,8.346IN OD RUN INSIDE,8-1/2IN CASING DRIFT,26PPF EA 515 PROTECTOR
PROTECTOR:CROSS COUPLING CABLE,7IN,(2) 11 X 11MM,ENCAPSULATED,ASSY,VAM SLIJ-II,8.307IN OD RUN INSIDE,8-1/2IN CASING DRIFT,1 OFF 18 X 11MM,38PPF EA 63 PROTECTOR
PROTECTOR:CROSS COUPLING CABLE,5-1/2IN,(2) 11 X 11MM,ENCAPSULATED,ASSY,VAM TOP HT,7.35IN OD RUN INSIDE,8-1/2IN CASING DRIFT,26PPF EA 5 PROTECTOR
PROTECTOR:CROSS COUPLING CABLE,7IN,(2) 11 X 11MM,ENCAPSULATED,ASSY,VAM SLIJ-II,8.307IN OD RUN INSIDE,8-1/2IN CASING DRIFT,1 OFF 18 X 11MM,38PPF EA 3 PROTECTOR
PUP JOINT,CASING:5-1/2IN OD,26LB/FT,6M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 13 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,29.7LB/FT,2M LG,GR 1CRP-110,VAM SLIJ-II BOX X PIN,METTALLURGY EA 4 PUP JOINT
PUP JOINT,CASING:20IN,6M,X-56,VIPER-3ST BOX X PIN,0.625IN WT,INSTALL W/ COMPOSITE PROTECTOR EA 3 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,4M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 6 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,3M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 4 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,33.7LB/FT,1M LG,GR SM13CRS-110,HUNTING BOSS SC PIN X PIN EA 2 PUP JOINT
PUP JOINT,CASING:7IN OD,26LB/FT,1M LG,GR 13CRL80,VAM TOP HT BOX X PIN EA 11 PUP JOINT
PUP JOINT,CASING:5-1/2IN OD,17LB/FT,4M LG,GR 13CRL80,VAM TOP HT BOX X PIN EA 8 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,1M LG,GR Q-125,VAM TOP BOX X PIN EA 7 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,1.5M LG,GR Q-125,VAM TOP BOX X PIN EA 6 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,3M LG,GR Q-125,VAM TOP BOX X PIN EA 5 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,29.7LB/FT,3M LG,GR 1CRP-110,VAM SLIJ-II BOX X PIN,METTALLURGY EA 1 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,4.5M LG,GR Q-125,VAM TOP BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,5M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,3M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,1.5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:7IN OD,26LB/FT,8M LG,GR 13CR-L80,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,29.7LB/FT,2M LG,GR 1CRP-110,VAM SLIJ II PIN X PIN,METTALLURGY EA 3 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,1.5M LG,GR Q-125,VAM TOP BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:6-5/8IN OD,32LB/FT,6M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,5M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,1.5M LG,GR Q-125,VAM TOP BOX X PIN EA 1 PUP JOINT
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,5FT LG,GR C-110,TSH BLUE RISER BOX X PIN,0.86IN WT EA 1 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:7IN OD,38LB/FT,3M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:6-5/8IN OD,32LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,4FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,10FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT
PUP JOINT,CASING:7IN OD,26LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 5 PUP JOINT,CASING
PUP JOINT,CASING:7IN OD,26LB/FT,2M LG,GR SM13CRS-95,VAM TOP HT BOX X PIN EA 5 PUP JOINT,CASING
PUP JOINT,CASING:7IN OD,29LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT BOX X PIN EA 4 PUP JOINT,CASING
PUP JOINT,CASING:7IN OD,38LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT PIN X PIN EA 2 PUP JOINT,CASING
PUP JOINT,CASING:7IN OD,38LB/FT,2M LG,GR SM13CRS-110,VAM TOP HT PIN X PIN EA 1 PUP JOINT,CASING
PUP JOINT,CASING:7-5/8IN OD,39LB/FT,8M LG,GR Q-125,VAM TOP BOX X PIN EA 4 PUP JOINT,CASING
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,20FT LG,GR C-110,TSH BLUE RISER BOX X PIN,API 5CT,R1,0.86IN WT EA 1 PUP JOINT,CASING
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,20FT LG,GR C-110,TSH BLUE RISER BOX X PIN,API 5CT,R1,0.86IN WT EA 2 PUP JOINT,CASING
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,20FT LG,GR C-110,TSH BLUE RISER BOX X PIN,API 5CT,R1,0.86IN WT EA 5 PUP JOINT,CASING
PUP JOINT,CASING:7IN OD,26LB/FT,1M LG,GR 13CR-L80,VAM TOP HT BOX X PIN EA 4 PUP JOINT,CASING
PUP JOINT,CASING:11-3/4IN OD,65LB,2M LG,GR Q-125,VAM SLIJ-II PIN X BOX,SEAMLESS EA 1 PUP JOINT,CASING
PUP JOINT,CASING:11-3/4IN OD,65LB,3M LG,GR Q-125,VAM SLIJ-II PIN X BOX,SEAMLESS EA 1 PUP JOINT,CASING
PUP JOINT,CASING:11-3/4IN OD,65LB,2M LG,GR Q-125,VAM SLIJ-II PIN X BOX,SEAMLESS EA 2 PUP JOINT,CASING
PUP JOINT,CASING:11-3/4IN OD,65LB,3M LG,GR Q-125,VAM SLIJ-II PIN X BOX,SEAMLESS EA 1 PUP JOINT,CASING
PUP JOINT,CASING:11-3/4IN OD,65LB,5M LG,GR Q-125,VAM SLIJ-II PIN X BOX,SEAMLESS EA 3 PUP JOINT,CASING
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,0.5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,1FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,3FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,2.5FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,3.5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,4.5FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:WASH PIPE,5-1/2IN OD,20LB/FT,8FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,2FT LG,GR P-110,TSH W511 BOX X PIN EA 3 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,3FT LG,GR P-110,TSH W511 BOX X PIN EA 3 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,1.5FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,2.5FT LG,GR P-110,TSH W511 BOX X PIN EA 1 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,4.5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,10FT LG,GR P-110,TSH W511 BOX X PIN EA 2 PUP JOINT,CASING:WASH PIPE
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,3FT LG,GR C-110,TSH BLUE RISER BOX X PIN,0.86IN WT EA 9 PUP, JOINT
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,3FT LG,GR C-110,TSH BLUE RISER BOX X PIN,0.86IN WT EA 2 PUP, JOINT
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,10FT LG,GR C-110,TSH BLUE RISER BOX X PIN,0.86IN WT EA 3 PUP, JOINT
PUP JOINT,CASING:9-5/8IN OD,80.58LB/FT,10FT LG,GR C-110,TSH BLUE RISER BOX X PIN,0.86IN WT EA 2 PUP, JOINT
RETRIEVER:AMT PACKER,8.125IN OD MILL,8.5IN OD TSWP BOX UP DRESSED GROUND,7IN ID DRESSED,TS0097 CRITICAL EA 1 RETRIEVER
VALVE:SAFETY,5-7/8IN X 1M LG,XT57 PIN X BOX,26.30LB/FT,C/W FULL OPENING SAFETY VALVE EA 2 SAFETY,VALVE
SAND:INTERMEDIATE STRENGTH PROPPANT,CERAMIC,20/40 MESH,CARBOAIR LB 40800 SAND
SAND:LIGHTWEIGHT PROPPANT,CERAMIC,20/40 MESH,BULK,NRT,CARBOLITE LB 34357 SAND
SAND:LIGHTWEIGHT PROPPANT,CERAMIC,20/40 MESH,BULK,NRT,CARBOLITE LB 28800 SAND
SCREEN,COMPLETION:SAND,PREMIUM,175MICRON,5-1/2IN OD,316L SS DUTCH WEAVE,GR 13CR L80,PIPE SZ 5-1/2IN,VAM TOP HT BOX X PIN,17LB/FT,SHROUDED,CENTRALIZER BOTH MID-JOINT & PIN END,33 TO 34FT LG,24IN HANDLING AREA ON BOTH END EA 54 SCREEN,COMPLETION
SEAL,UNIT:190 TO 60,13CR 80KSI,VITON,BMS-S210 13 CR 80 MYS 22 HRC MAX BPS-E201 (V001) 95HD VTN BND EA 79 SEAL
SEAL:5IN,18LB,VAM TOP HT BOX UP X PIN DOWN,GR SUPER 13CR-110,24IN LG,MYS 32 HRC MAX,BORE RECEPTACLE 3.75 GP EA 1 SEAL 
KIT,SEAL:REDRESS,KV-65 PACKING,F/ MODEL AFM 4.562IN TOP NO-GO BLANKING PLUG EA 3 SEAL, KIT
KIT,SEAL:REDRESS,F/ MODEL AFM 5.812IN TOP NO-GO BLANKING PLUG EA 2 SEAL, KIT
SEAL,ASSEMBLY:SNAP-LATCH,5-1/2IN,26LB,VAM TOP HC BOX UP,MODEL S-22,BMS-S230 GR 13CR,110KSI YIELD STRENGTH,32 HRC MAX,BCS-A308 ON SEALING AREA DRY FILM,XYLAN 1052 LESS BOTTOM SUB,BPS-E202 VS001 95HD VITON BOND,W/ ADDED LG F/ ONE THD RECUT BOX END,F/ SIZE 190-60 PACKER EA 2 SEAL,ASSEMBLY
SEAL,ASSEMBLY:SNAP-LATCH,5-1/2IN,26LB,VAM TOP HC BOX UP,MODEL S-22,BMS-S230 GR 13CR,110KSI YIELD STRENGTH,32 HRC MAX,BCS-A308 ON SEALING AREA DRY FILM,XYLAN 1052 LESS BOTTOM SUB,BPS-E202 VS001 95HD VITON BOND,W/ ADDED LG F/ ONE THD RECUT BOX END,F/ SIZE 190-60 PACKER EA 2 SEAL,ASSEMBLY
SEAL,UNIT:4.875 ID X 5.989IN OD,BMS-S230 GR 13CR,18IN LG,110KSI YIELD STRENGTH,32 HRC,BPS-E202 V001 95HD VITON BOND,BPS-B201 V40 O-RING,5-1/2IN NATIONAL BOX UP X PIN DOWN CRITICAL BP QCP QRD,F/ SIZE 190-60 PACKER EA 28 SEAL,UNIT
SEAL,UNIT:4.875 ID X 5.989IN OD,BMS-S230 GR 13CR,18IN LG,110KSI YIELD STRENGTH,32 HRC,BPS-E202 V001 95HD VITON BOND,BPS-B201 V40 O-RING,5-1/2IN NATIONAL BOX UP X PIN DOWN CRITICAL BP QCP QRD,F/ SIZE 190-60 PACKER EA 12 SEAL,UNIT
SEAT,VALVE:BALL,4IN VALVE,RTFE SEAT,CLASS 150,ASTM A351 GR CF8M BODY,SS GR 316 BALL,API 607 4TH EDITION,FULL PORT FLG,SHARPE EA 2 SEAT,VALVE
SHOE,FLOAT:DOWNJET DOUBLE VALVE,22IN,244LB/FT,X-60,VIPER-3ST BOX,1IN,R3 LG JO 1 SHOE,FLOAT:
SHOE,REAMER:8-1/4IN OD,47.1LB/FT,GR P-110,VAM FJL BOX UP,7-5/8IN,W/ ROTATING CENTRALIZER,BAFFLE PLATE,DOWN JETS EA 1 SHOE,REAMER
SHOE:FLSHOD,11.772 ID X 11.75 OD X 48IN LG,BLK ROTR,TSWP BOX UP,BMS-A310,100KSI MYS GA,TS0125 EA 2 SHOE:FLSHOD
SHOE:INDEXING MULE,SIZE 190-60,13CR,BMS-S230,5-1/2IN,NATIONAL BOX UP,4.86 ID X 5.989 OD X 41.15IN LG,110 MIN YIELD STRENGTH,32 HRC MAX,W/ (1) FULL THD RECUT END,140K TENSILE,33K COMP EA 2 SHOE:INDEXING MULE
SHOE:INDEXING MULE,SIZE 190-60,13CR,BMS-S230,5-1/2IN,NATIONAL BOX UP,4.86 ID X 5.989 OD X 41.15IN LG,110 MIN YIELD STRENGTH,32 HRC MAX,W/ (1) FULL THD RECUT END,140K TENSILE,33K COMP EA 1 SHOE:INDEXING MULE
SHOE:SET,5IN,TYPE GPV,SUPER 13CR 110 32 HRC MAX,BMS-S230,VAM TOP HT BOX UP,18LB/FT,HNBR O-RING,ELGILOY SPRING EA 1 SHOE:INDEXING MULE
SLEEVE:HOLD OPEN,7IN,41XX STL 80 MYS,20 TO 300DEG F WK,4.25 ID X 5.84IN OD,5.812IN SEAL BORE,STD SERVICE,5000FT SETTING DP,REGULATED TRACEABLE 5.88IN LOCK NO-GO OD,W/ BA PROFILE MPN H811505250 RUNNING TOOL,MPN H811505250 PULLING TOOL,B-198-7B TECH UNIT,F/ MODEL ONYX-5E SCSSV EA 2 SLEEVE
SLEEVE:HOLD OPEN,5-1/2IN,97.19IN LG,41XX STL 80 MYS,3.97 ID X 4.9IN OD,4.562IN SEAL BORE,W/ BA PROFILE MPN 10214737 RUNNING & PULLING TOOL,B-129-5 TECH UNIT,BMS-A098,BMS-P106,F/ MODEL TSM(E)-5 & THUNDER-5(E) SCSSV EA 2 SLEEVE
SOLVENT:MUTUAL,55GAL PLASTIC DRUM,DOPE FREE GAL 936 SOLVENT
SPLICE:CHEMICAL INJECTION,1/4IN,NICKEL ALLOY 718,120 MYS 32 TO 40 HRC,0.188 ID X 0.693 OD X 5.264IN LG,20000PSI BURST,F/ TESTABLE CONTROL LINE CROSSOVER W/ HASTELLOY C-276 FERRULE EA 4 SPLICE:CHEMICAL INJECTION
COLLAR,STOP:SLIP-ON,7-5/8IN,NON-HINGED,HEAVY DUTY STL,7.7567 ID X 8.228IN OD,21TON HOLDING FORCE,ONE PIECE,W/ GRUB SCREW EA 12 STOP, COLLAR
COLLAR,STOP:SLIP-ON,13-5/8IN,NON-HINGED,HEAVY DUTY STL,13.81 ID X 14.29IN OD,18.5TON HOLDING FORCE,ONE PIECE,W/ GRUB SCREW EA 7 STOP, COLLAR
COLLAR,STOP:SLIP-ON,7-5/8IN,NON-HINGED,HEAVY DUTY STL,7.7567 ID X 8.228IN OD,21TON HOLDING FORCE,ONE PIECE,W/ GRUB SCREW EA 6 STOP, COLLAR
SUB:KNOCKOUT ISOLATION,DUAL MAGNUMDISK,5-1/2IN,26LB,VAM TOP HT BOX X PIN,10000PSI,GR SUPER 13CR-110 MYS,400DEG F EA 1 SUB
SUB:KNOCKOUT ISOLATION,DUAL MAGNUMDISK,5-1/2IN,17LB,VAM TOP HT PIN X BOX,10000PSI,GR 13CR-80,CDA,6-3/4IN OD,400DEG F EA 2 SUB X OVER 
SUB,CASING:NO-GO,5IN,15LB/FT,GR SUPER 13CR110 32 HRC MAX,VAM TOP HT BOX,BMS-S230,3IN DIA COUPLING EA 1 SUB,CASING NO-GO
SUPPORT:PLATE,63IN HORSE SHOE,W/ 8IN KEY SLOT,3IN WT,W/ 2 SWIVEL EYE BOLT RATED TO 7 TON,F/ LAND CLS SUBSEA TOOLING EA 1 SUPPORT:PLATE
CAP:TEST,9-5/8IN,ALLOY STL,ASTM GR 4140/4340,80.58LB/FT,TSH BLUE RISER BOX EA 3 TEST, CAP
PLUG:TEST,9-5/8IN,ALLOY STL,ASTM GR 4140/4340,80.58LB/FT,TSH BLUE RISER PIN EA 3 TEST, PLUG
TOOL:QUICK CONNECT,7IN,VAM TOP HT BOX,VAM TOP HT PIN DOWN,ABERDEEN 6 ID X 7.812IN OD,GR 13 CRS-110 BMS-S230 MYS 32 HRC MAX,VAM TOP HT INTERNAL CONNECTION,W/ ADDED LG F/ (1) THD RECUT EACH END,29LB/FT EA 1 TOOL:QUICK CONNECT
VALVE,SUBSURFACE SAFETY:RETRIEVABLE,5-1/2IN,TYPE WDCL-5,5000PSI WP,INCOLOY 925,SELF EQUALIZING,CHEMRAZ ELASTOMER,2.953IN ID MAX,WIRELINE OPERATED,API 14A,OPTIMAX SERIES,INSERT SAFETY,NACE MR0175,4.562IN SEAL BORE,30 TO 300DEG F,1000FT FAIL SAFE SETTING DP,X TO FIT INTO HALLIBURTON SP TRSSSV PROFILE,W/ SPECIAL INTERNAL WET MATE CONNECTOR POD & X PROFILE LOCK F/ DAMAGED CONTROL LINE EA 1 VALVE
VALVE,FORMATION ISOLATION:KNOCK-OUT,7IN,100PSI,SLHT BOX X PIN,13CR 80 MYS 22 HRC MAX,SGL ACTING FLAPPER,MODEL C,26LB/FT,5 ID MIN X 7.65 OD MAX X 31.25IN LG,W/ ADDED LG F/ (2) THD RECUT ON EA END EA 3 VALVE
ASSEMBLY:VALVE,KV-2,6-5/8IN FH 15K WP,3-1/4IN ID X 8-1/2IN OD,6-5/8IN FH BOX X PIN CONNECTIONS,PACKARD 2 PIECE KELLY VALVE,MANUFACTURED & TESTED PER API SPEC 7,THD PROTECTORS & OPERATING WRENCH ARE INCLUDED,NEXGEN EA 1 VALVE
VALVE,CHECK:EQUALIZING,4-1/8IN,10000PSI WP,BMS-S210 BODY,AOFT-2 MODEL,13CR,22HRC MAX,80 MIN YIELD STRENGTH,22 HRC MAX,BPS-B201 (V45) O-RING,275DEG F WORKING EA 2 VALVE,CHECK
VALVE,CHECK:EQUALIZING,4-1/8IN,10000PSI WP,BMS-S210 BODY,AOFT-2 MODEL,13CR,22HRC MAX,80 MIN YIELD STRENGTH,22 HRC MAX,BPS-B201 (V45) O-RING,275DEG F WORKING EA 2 VALVE,CHECK
VALVE:CHEMICAL INJECTION,12500PSI,SURETREAT HP,CRUSH RING,1/4IN JAM NUT UP EA 2 VALVE:CHEMICAL INJECTION
PUP JOINT,CASING:5.294 TO 7.035IN OD,216IN LG,ALLOY 0125,125000PSI MIN YIELD,SERIAL NO 101782394,LEGACY NO 2BPC77205-BEK EA 4 VERSAFLEX
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,0.5FT LG,GR P-110,TSH W511 BOX X PIN EA 2 WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,1FT LG,GR P-110,TSH W511 BOX X PIN EA 2 WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,4FT LG,GR P-110,TSH W511 BOX X PIN EA 3 WASH PIPE
PUP JOINT,TUBING:WASH PIPE,3-1/2IN OD,9.2LB/FT,3.5FT LG,GR P-110,TSH W511 BOX X PIN EA 1 WASH PIPE
BUSHING:WATER,3.25IN ID X 16IN OD X 1.5M OAL,96LB/FT,TH513 PIN,5-1/2IN,HT55 BOX,110KSI,AISI 4140,W1942 EA 1 WELL CONTROL EQUIPMENT
BUSHING:WATER,3.25IN ID X 16IN OD X 1.5M OAL,96LB/FT,TH513 PIN,5-1/2IN,HT55 BOX,110KSI,AISI 4140,W1942 EA 1 WELL CONTROL EQUIPMENT
PUP JOINT,CASING:9-5/8IN OD,47LB/FT,3.5M LG,L80-13CR,SLIJ-II EA 1 #N/A
BUSHING:WATER,7 X 5-7/8IN,GR P-110,35 LB/FT,VAM TOP HT PIN,23.4 LB/FT,VX57 BOX,36IN LG EA 1 #N/A
BUSHING:WATER,5-1/2 X 6-5/8IN,36IN LG,21.9LB/FT,FH BOX UP,32LB/FT,VAM TOP HT PIN DOWN,GR P-110 EA 1 #N/A
BUSHING:WATER,36IN LG,39LB/FT,7-5/8IN,VAM TOP PIN,5-7/8IN,VX57 BOX EA 1 #N/A
VLV,RLF:5-1/2IN INLET,TUBING RETRIEVABLE EA 1  
PLUG:RETRIEVABLE BRIDGE,8.218IN OD GA RI EA 2  
PACKER,PRODUCTION:PREMIER,5-1/2IN,26LB/F EA 1  
SCREEN,COMPLETION:SAND,NO PATH/SHUNT,3-1 EA 12  
CHRG,PERFORATING:POWERFLOW 4621,HMX,20 X FT 162  
PUP JOINT,CSG:7IN OD,26LB/FT,2M LG,GR 13 EA 50  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,2M LG,G EA 61  
PUP JOINT,CSG:7IN OD,26LB/FT,3M LG,GR 13 EA 26  
PUP JOINT,CSG:5-1/2IN OD,26LB/FT,2M LG,G EA 31  
SUB,CSG:ROTATING CENTRALIZER,10IN OD,68. EA 6  
CENTRALIZER:SOLID BODY/SLIP ON,5-1/2 X 8 EA 114  
PROTECTOR:LOCKDOWN SLEEVE SEAT,TYPE SS-1 EA 2  
PUP JOINT,CSG:7-5/8IN OD,29.7LB/FT,2M LG EA 6  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,3M LG,G EA 23  
CPLG,CSG:5-1/2IN,17 LB,VAM TOP HT,GR GR EA 65  
PUP JOINT,CSG:6-5/8IN OD,32LB/FT,6M LG,G EA 9  
PLUG:LIFT NUBBIN,17IN LG,ALLOY STL AISI EA 11  
CPLG,CSG:7IN OD,38LB,VAM TOP HT BOX X BO EA 50  
PUP JOINT,CSG:5-1/2IN OD,26LB/FT,3M LG,G EA 10  
VALVE:TIW,4145,4-1/2IN,IF (NC 50) PIN X EA 3  
CPLG,CSG:5-1/2IN OD,26LB,VAM TOP HT BOX EA 47  
COLLAR,STOP:1-PIECE,5-1/2IN,SO,CAST DUCT EA 224  
PUP JOINT,CSG:7-5/8IN OD,29.7LB/FT,2M LG EA 4  
PUP JOINT,CSG:6-5/8IN OD,32LB/FT,6M LG,G EA 6  
XOVER,CSG:5-1/2IN OD,26 LB,7IN OD,38 LB EA 5  
PUP JOINT,CSG:7IN OD,38LB/FT,2M LG,GR SM EA 9  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,5.5M LG EA 13  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,3M LG,G EA 13  
XOVER,CSG:7IN OD,26 LB,5-1/2IN OD,17 LB EA 7  
XOVER,CSG:7IN OD,26 LB,5-1/2IN OD,17 LB EA 7  
SHOE:INDEXING MULE,SIZE 190-60,13CR,BMS- EA 1  
TBG,ACCESSORY:CENT,3-1/2 OD,9.2,13CR80,S EA 2  
PUP JOINT,CSG:9-5/8IN,80.58LB,C110,TSH B EA 2  
PUP JOINT,CSG:7IN OD,26LB/FT,4M LG,GR 13 EA 9  
LINE,SUBSEA CNTRL:HYD,1/4IN,0.049IN WT W M 400  
PUP JOINT,CSG:9-5/8IN,53.5LB,P110HC,VAM EA 6  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,2M LG,G EA 11  
PROTECTOR:CROSS COUPLING CABLE,7IN,(2) 1 EA 116  
SUB,DRILL PIPE:LIFT,3-1/2IN OD,GR AISI 4 EA 3  
PUP JOINT,CSG:7-5/8IN OD,39LB/FT,5M LG,G EA 4  
NIPPLE,SEATING:TOP NO-GO NON-PORTED EA 1  
PUP JOINT,CSG:PERFORATED,5-1/2IN OD,17LB EA 9  
PUP JNT,CSG:9-5/8IN,53.5LB,P110HC,VAM TO EA 8  
XOVER,CSG:6-5/8IN OD,32 LB,5-1/2IN OD,26 EA 3  
XOVER,CSG:6-5/8IN OD,32 LB,5-1/2IN OD,26 EA 3  
PUP JOINT,CSG:9-5/8IN,80.58LB,C110,TSH B EA 1  
PROTECTOR:CROSS COUPLING,5-1/2IN EA 7  
XOVER,CSG:9-7/8IN OD,62.8 LB,7-5/8IN OD EA 1  
XOVER,CSG:9-7/8IN OD,62.8 LB,7-5/8IN OD EA 1  
TBG,OCTG:3-1/2 OD,9.2,13CRL80,SLHT,0.254 M 12  
PROTECTOR:CROSS COUPLING CABLE,6-5/8IN,( EA 54  
PUP JOINT,CSG:5-1/2IN OD,26LB/FT,2M LG,G EA 3  
PUP JOINT,CSG:5-1/2IN OD,26LB/FT,2M LG,G EA 3  
PUP JOINT,CSG:7-5/8IN OD,29.7LB/FT,2M LG EA 1  
PUP JOINT,CSG:7-5/8IN OD,29.7LB/FT,2M LG EA 1  
PUP JOINT,CSG:6-5/8IN OD,32LB/FT,2M LG,G EA 5  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,2.5M LG EA 3  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,2.5M LG EA 3  
PUP JOINT,CSG:7-5/8IN OD,39LB/FT,1M LG,G EA 3  
PLUG:LIFT NUBBIN,17IN LG,ALLOY STL AISI EA 2  
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X EA 4  
XOVER,CSG:5-1/2IN OD,26 LB,7IN OD,38 LB EA 1  
PUP JOINT,CSG:7IN OD,26LB/FT,3M LG,GR 13 EA 2  
SUB,DRILL PIPE:LIFT,3-1/2IN OD,GR AISI 4 EA 1  
PUP JOINT,CSG:5-1/2IN OD,26LB/FT,2M LG,G EA 2  
PUP JOINT,CSG:7IN OD,38LB/FT,3M LG,GR SM EA 1  
PUP JOINT,CSG:7IN OD,38LB/FT,3M LG,GR SM EA 1  
CLAMP:CROSSOVER CABLE PROTECTOR,5-1/2 X EA 3  
CPLG,CSG:9-5/8IN,53.5 LB,VAM TOP,GR GR P EA 5  
PROTECTOR:CROSS COUPLING CABLE,5-1/2IN,( EA 29  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,5.5M LG EA 2  
PUP JOINT,CSG:7IN OD,26LB/FT,2M LG,GR 13 EA 2  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,3M LG,G EA 2  
CENTRALIZER:SOLID BODY/SLIP ON,5-1/2 X 8 EA 7  
XOVER,CSG:5-1/2IN OD,26 LB,5-1/2IN OD,26 EA 1  
XOVER,CSG:5-1/2IN OD,26 LB,5-1/2IN OD,26 EA 1  
CPLG,CSG:9-5/8IN,53.5 LB,VAM TOP,GR GR P EA 4  
PUP JOINT,CSG:5-1/2IN OD,17LB/FT,2M LG,G EA 2  
PUP JOINT,CSG:6-5/8IN OD,32LB/FT,3M LG,G EA 1  
XOVER,CSG:7-5/8,39 LB,Q125,TSH 513 BOX,7 EA 1  
COLLAR,STOP:1-PIECE,5-1/2IN,SO,CAST DUCT EA 18  
PUP JOINT,CSG:9-5/8IN,53.5LB,Q125,VAM SL EA 1  
PUP JOINT,CSG:7-5/8IN OD,39LB/FT,1M LG,G EA 1  
CPLG,CSG:5-1/2IN,17 LB,VAM TOP HT,GR GR EA 3  
PUP JOINT,CSG:PERFORATED,5-1/2IN OD,17LB EA 1  
CPLG,CSG:5-1/2IN OD,26LB,VAM TOP HT BOX EA 2  
PUP JOINT,CSG:WASH PIPE,5-1/2IN OD,20LB/ EA 4  
CPLG,CSG:7IN OD,26LB,VAM TOP HT BOX X BO EA 5  
XOVER,CSG:7IN,38LB LB,SM13CRS-110,VAM TO EA 1  
CPLG,CSG:10-3/4,45.5 LB,VAM TOP BOX X BO EA 6  
CSG,ACC:PUP JOINT,9-5/8IN,53.5LB,P110,VA EA 3  
XOVER,CSG:9-5/8IN OD,53.5 LB,9-5/8IN OD EA 1  
XOVER,CSG:9-5/8IN,53.5,7IN,26,48IN LG,GR EA 2  
PUP JOINT,CSG:WASH PIPE,5-1/2IN OD,20LB/ EA 2  
PUP JOINT,CSG:WASH PIPE,5-1/2IN OD,20LB/ EA 1  

Seller Terms

  • Salvex and the seller have the right to reject any and all offers.
  • This product is sold AS IS, WHERE IS.
  • Buyer is responsible for all taxes, duties, loading and freight charges.
  • Seller does not offer any warranties or manufacturer warranties.
  • Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
  • It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
PLACE A BID

Other Listings in OCTG Accessories

(1 bids)
202 Units
India
(0 bids)
35.5 Metric Tons
null, India
(0 bids)
149 Items
West Virginia, United States
(1 bids)
1 Lot
null, Viet Nam
(1 bids)
90 Units
Oklahoma, United States
(1 bids)
76 Items
Mexico
(0 bids)
1 Lot
Egypt
(6 bids)
1 Unit
Texas, United States
(0 bids)
182 Items
Europe
(0 bids)
1 Lot
South America
(0 bids)
80 Units
Brazil
(0 bids)
10 Units
Saudi Arabia
(2 bids)
2047 Units
null, Hungary
VIEW ALL OCTG ACCESSORIES LISTINGS (27)

Other Listings in Oil and Gas

(1 bids)
2 Solar Turbines
Colorado, United States
(1 bids)
2 Compressors
Singapore
(2 bids)
42 Units
United States
(3 bids)
1 Centrifuge
Texas, United States
(0 bids)
760 Feet
Middle East
(1 bids)
1 System
Texas, United States
(0 bids)
25 Units
Canada
(0 bids)
450 Feet
Middle East
(0 bids)
5 Equipment
Oklahoma, United States
(1 bids)
15129 Feet
Hungary
(6 bids)
3217.02 Feet
Texas, United States
(0 bids)
51726.78 Feet
Middle East
(0 bids)
413 Units
Pennsylvania, United States
(0 bids)
1 Pumpjack
Texas, United States
(1 bids)
8480 Feet
Middle East
(0 bids)
13840 Feet
Netherlands
(1 bids)
1 Unit
Singapore
(0 bids)
1 Pumping Unit
Texas, United States
VIEW ALL OIL AND GAS LISTINGS (1272)