| ID: | 183002438 |
| Quantity: | 236 Units |
| Manufacturer: | General Electric View more items from this manufacturer |
| Condition: | All of these items are obsolete. Items to be sold "as is, where is". Buyer is responsible for loading, freight and logistics to final destination. |
| # of Bids: | 0 PLACE A BID |
| Product Location: | Viet Nam |
| End Time: | Bid As Soon As Possible |
| Time Remaining: | Bid As Soon As Possible |
| Trader: | Enrique Vargas +57-3003080957ASK A QUESTION |
This lot of Subsea Wellhead is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
Details are listed below:
Quantity: 236 units.
| Serial | Description | Unit | Qty | Condition | Manufacturer |
| 1 | Repair Kit, G393-RK | ea | 2 | Obsolete | GE |
| 2 | Repair Kit, G415-RK | ea | 2 | Obsolete | GE |
| 3 | Repair Kit, G384-RK | ea | 2 | Obsolete | GE |
| 4 | Seal, Polypak, 13.358 Od 12.858 ID.250 Cs. Polymyte Shell And Viton O-Spring For Use On NSP & Wear Bushing, P/N: 201144-6 |
ea | 4 | Obsolete | GE |
| 5 | O-Ring for BRRNSP 195000-151 | ea | 8 | Obsolete | GE |
| 6 | O-Ring for MS-700 STD NSP, P/N:195003-465 | ea | 6 | Obsolete | GE |
| 7 | Wear Bushing Part, Ms-700, 18.750, D-Ring For Use On NSP & Wear Bushing, P/N: H56014-1 |
ea | 3 | Obsolete | GE |
| 8 | Seal, Plypak-Deep, 17.500 OD 16.500 ID .500 CS, .750 Depth, Molythane, P/N: 195358-34 |
ea | 1 | Obsolete | GE |
| 9 | Vetco - Miscellaneous, Spring Compression, Stanless Steel, P/N: 195092-463 |
ea | 8 | Obsolete | GE |
| 10 | Shoulder Screw, Socket Head, 5/16 In Nom Shouder - Dia x 0.625 Shouder - Length, .250-20UNRC-3A, P/N: H301275-135 |
ea | 8 | Obsolete | GE |
| 11 | O-ring, AS568A-151, 2.987 (Nom 3) ID, 0.103 (Nom 3/32) CS, Material Per VG5.1010.1.1, Nitrile (NBR), P/N: 195000-151 |
ea | 8 | Obsolete | GE |
| 12 | Corrosion Cap For Runing With DP, P/N: H50771-101 | ea | 1 | Obsolete | GE |
| 13 | Oring, Special, 36.950 ID X.500 Cs, Buna N, 70 Duro, Spliced And Vulcanized For Use On 18-3/4" High Pressure Wellhead Housing Extension Joint, P/N: 200008-198 |
ea | 3 | Obsolete | GE |
| 14 | Oring, Special, 29.250 ID X.750 Cs, Buna N, 70 Duro, Spliced And Vulcanized For Use On 36" Wellhead Housing Extension Joint, P/N: 200008-169 |
ea | 2 | Obsolete | GE |
| 15 | Oring, Special, 30.500 ID X.275 Cs, Buna N, 70 Duro, Spliced And Vulcanized For Use On 18-3/4" High Pressure Wellhead Housing Extension Joint, P/N: 200008-152 |
ea | 2 | Obsolete | GE |
| 16 | Seal Polypak-Deep, 17.500 OD 16.500 Id .500 Cs, .750 Depth, Molythane Vetco For Use On NSP & Wear Bushing, P/N: 195358-43 |
ea | 2 | Obsolete | GE |
| 17 | Corrosion Cap Part, Hot Stab, P/N: H50462-1 | ea | 1 | Obsolete | GE |
| 18 | SG-TPR Seal, Type MS-700 (Emergency Seal) (P/N: H57030-1H822) |
ea | 2 | Obsolete | GE |
| 19 | MS-E Emergency Pack-Off, MS-700 (P/N: H57465-1H822) | ea | 2 | Obsolete | GE |
| 20 | MS-1 Annulus Seal Assembly (P/N: H57028-1H822) | ea | 3 | Obsolete | GE |
| 21 | Slope Indicator ASSY, 0-2 DEG. For 36" WH HSG JT (P/N: H57720-101) |
ea | 2 | Obsolete | GE |
| 22 | 9-5/8" x 18-3/4" Casing Hanger Unit, MS-700 | ea | 2 | Obsolete | GE |
| 23 | 9-5/8" x 18-3/4" Wear Bushing, Type MS-700, (P/N: H57256-1) | ea | 2 | Obsolete | GE |
| 24 | 9-5/8" x 18-3/4" Wear Bushing, Type MS-700, Bit Run & Retrieval (P/N: H57535-1) | ea | 1 | Obsolete | GE |
| 25 | SG-TPR seal, type MS-700 (emergency seal) (P/N H57030-1H822) | ea | 2 | Obsolete | GE |
| 26 | MS-E Emergency pack-off, MS-700 (H57465-1H822) | ea | 2 | Obsolete | GE |
| 27 | 13-5/8" Casing Hanger Unit VamTop Box Down (R50499-70) C/w 13-5/8" Pup Joint, 88.2 PPF, 12.250 Drift ID, Vam Top Pin x Pin, 10FT | ea | 2 | Obsolete | GE |
| 28 | 13-3/8" x 18-3/4" Casing Hanger Unit, MS-700 | ea | 2 | Obsolete | GE |
| 29 | 13-3/8" x 18-3/4" Wear bushing, Type MS-700, Bit Run & Retrieval (P/N: H57534-1) | ea | 1 | Obsolete | GE |
| 30 | 16" x 18-3/4" Casing Hanger, C/w: Pup Joint (P/N: CR50551-4) | ea | 3 | Obsolete | GE |
| 31 | 18-3/4" MS-1 Annulus Seal Assembly, P/N: H57028-1H822 | ea | 1 | Obsolete | GE |
| 32 | 18-3/4" VX-2/VT-2 Ring gasket (H10931-2) | ea | 2 | Obsolete | GE |
| 33 | 18-3/4" VX Ring gasket (111227-1) | ea | 1 | Obsolete | GE |
| 34 | 18-3/4" x 20" HPWH Unit, DWHC MS-700, 15,000 PSI, P/N: H115904-36 C/W 20" Casing, 1" WT, API 5L, X-56, Leopard SD85 Pin Down, 30FT | ea | 2 | Obsolete | GE |
| 35 | 18-3/4" Corrosion Cap (P/N: H288500-101) | ea | 2 | Obsolete | GE |
| 36 | 18-3/4" Corrosion Cap, Diverless (P/N: H50771-101) | ea | 1 | Obsolete | GE |
| 37 | 18-3/4" Nominal Seat Protector, Type MS-700 (P/N: H57034-1) |
ea | 2 | Obsolete | GE |
| 38 | 18-3/4" Nominal Seat Protector, Type MS-700, Bit Run & Retrieval (H57636-1) | ea | 1 | Obsolete | GE |
| 39 | 18-3/4" VX-2/VT-2 Ring Gasket (P/N: H10931-2) | ea | 8 | Obsolete | GE |
| 40 | 18-3/4" VX Ring Gasket (P/N: 111227-1) | ea | 1 | Obsolete | GE |
| 41 | 20" x 16" Submudline Casing Hanger C/w: 20" x 0.625" WT, X56, Leopard SD85 Box Up x Pin Down. P/N: CR49689-17 | ea | 1 | Obsolete | GE |
| 42 | 18-3/4" x 20" HPWH Unit , DMS-700 15.000 PSI, P/N R111821-16 C/w: 20" x 1" WT Extension | ea | 1 | Obsolete | 42 |
| 43 | Casing Hanger Pack-Off Assembly, 20" x 16" (P/N: H57361-2) | ea | 4 | Obsolete | GE |
| 44 | 36" LPWH Joint, 2" WT, HC -2 , API5L, X56, DQ HC-100/MT Pin down, 67ft, P/N: CH59004-70 | ea | 2 | Obsolete | GE |
| 45 | 36" LPWH Joint, 2" WT, DMS API5L, X56, HC-100/MT Pin Down, 60Ft , P/N :R111615-13 | ea | 1 | Obsolete | GE |
| TOTAL | 119 |
| Serial | Description | Unit | Qty | Condition | Manufacturer |
| 1 | 20" x 16" Submudline Casing Hanger C/w: 20" x 0.625" WT, X56, Leopard SD85 Box Up x Pin Down. P/N: CR49689-17 | ea | 1 | Obsolete | VETCO |
| 2 | 36” Low Pressure Wellhead HSG Unit, HC2-MS, Assembly, 36 X 2.00in, Cam Style Running Tool Profile With 36" Extension Joint, P/N:R111815-78RPS2 | EA | 1 | Obsolete | GE |
| 3 | 30" Low Pressure Wellhead Hsg Unit, Ms-700, 30, Cam Style Running Tool, W/ 4 Ball Valve Outlets 3" Including 4 Ball Valves & Extension Joint, P/N: R299023-3RPS2 | EA | 14 | Obsolete | GE |
| 4 | 18-3/4” Corrosion Cap,Wellhead Abandonment, leafspring retention for H-4 WH, has 2 running/lift pins W.horizonal ROV Tab, P/N:H50462-1 ROV Hot tab is used to inject oil ; H288500-1 | EA | 9 | Obsolete | GE |
| 5 | Corrosion Cap Part, Diverless, Stab, Male, Hydraulic Assy, H50462-1 | EA | 3 | Obsolete | GE |
| 6 | 13-3/8” Casing Hanger, MS-700, 18.750 X 13.375 Nominal, First Position, For 15K Wellhead, 10,000 PSI MWP,13.375 68LB/FT Tenaris Blue Box Down, C/W Pup Joint, 13.375 OD, 68 PPF, 10FT Long, L-80 TSH Blue Pin X Pin, P/N:H202092-55RPS2 | EA | 5 | Obsolete | GE |
| 7 | Wear Bushing,MS-700, 18.750 X 10.750,For Use With Series 700 Isolation Test Tool And Plug Tool, H57302-1 | EA | 3 | Obsolete | GE |
| 8 | Casing HGR, Dummy, MS-700, Centralising, First Position, To Attach TO 18.750 X 9.625 / 10.75 Casing Hanger, 13.500 Stack-Up Height, P/N:H57041-62J2G | EA | 1 | Obsolete | GE |
| 9 | Wear Bushing,MS-700, 18.750 X 13.375,For Use With Spear 15.12 Catch Dia., P/N:H57224-1RPS2 | EA | 2 | Obsolete | GE |
| 10 | Seat Protector ,MS-700, 18.750, 42.06 Stackup For 54.81 Wellhead Stackup, P/N:H57034-1RPS2 | EA | 2 | Obsolete | GE |
| 11 | Wear Bushing, MS-700,18.750,BRRNSP, For Use with MS-700 Plug Tool, P/N:H57636-1 | EA | 2 | Obsolete | GE |
| 12 | Wear Bushing, MS-700,18.750 X 13.375 For Use Plug Tool, P/N:H57534-1 | EA | 2 | Obsolete | GE |
| 13 | 36” Guide Base, Permanent Non-RetrievablE, 2 ARM, TLP Special, P/N:H135435-3RPS2 | EA | 2 | Obsolete | GE |
| 14 | 30” Permanent Guide Base For 30" LP Housing, Non-Retrievable 2 ARM, TLP Special With 7 Ft Apart Guide Post Receptacles. P/N:R299023-3RPS2 | EA | 15 | Obsolete | GE |
| 15 | 36” LP Corrosion Cap,Wellhead Abandonment, P/N:H288500-9 | EA | 6 | Obsolete | GE |
| 16 | 30" LP Corrosion Cap,Wellhead Abandonment, With Horizonal Rov Stab Port, P/N:H288500-8 | EA | 15 | Obsolete | GE |
| 17 | Swage nipple 4" x 3" A234 WPB SCH40 threaded NPTM at both end (length 9") + 1 full coupling 4" A105 3000# threaded NPTF at both end + 1 pipe nipple 4" SCH40 A106 Gr.B/API 5L Gr.B | Set | 28 | Obsolete | Nam Long Co. |
| 18 | Body Plug 16" x 8.4" LG c/w Body Plate 16"x1" | EA | 4 | Obsolete | PVD Tech |
| 19 | Spreader Bar SWL 7500kg | EA | 2 | Obsolete | PVD Tech |
| TOTAL | 117 |
To place bids or to sell items on this site, you must first become a member.
Member Benefits
440 Louisiana Street
Suite 550
Houston, TX 77002
