AMR Electrostatic Crude Oil Desalter with Transformer (Oil & Gas Dehydration)

Seller Description

This AMR Electrostatic Crude Oil Desalter with Transformer ­­­­­is no longer needed for the company's own operation and is being sold as an asset liquidation for its owner.

• Equipment: Electrostatic Crude Oil Desalter with Transformer
• Manufacturer: AMR Process Inc.
• Specifications: 
  • Capacity range of 3000 BPD for high BS&W and 10,000 BPD for lower BS&W (for light crude- can be adjusted for different types of crude)
  • DESALTER: Horizontal pressure vessel, 6.5' ID x 14' S/S
  • Design: FV/150 PSIG @ 260 degrees Farenheit
  • Minimum design temperature: 41 degrees Fahrenheit
  • Carbon steel materials +3.00mm corrosion allowance
  • Vortex breakers on the process water outlet
  • Headers inlet distributor manifolds, sludge drain, internal grid support clips
  • Stainless steel high temp insulating hangers, plated steel uni-strut
  • Plated steel grids, stainless steel high temp DualLoc entrance bushings
  • Internal wiring/hookup, carbon steel plate bolting, stainless steel safety float
  • Radiography: RT-2
  • Mounted on Structural steel skid w/4 lifting lugs
  • 10'W x 20'L x 12'H - approx. 18,000 lbs.

• POWER UNIT: 
  • AC-Plus (AC) Haz-Loc, (1) 25 kVA
  • 100% reactance, housed in the mineral oil field, hermetically sealed mild steel tank
  • Primary voltage:415 VAC, 1 phase, 60 Hz
  • Primary connections are in an IP66 air junction box with (3) 3" primary entrance couplings for (4) 1" feedback couplings.
  • Secondary outputs: 12-16.6-20-23 and 25-kV AC via pad-lockable tap switches
  • Independent secondary connections with a connection in an oil-filled aux HV box Output for use with flexible HV cable
  • Standard tank specifications: material thickness 7 gauge body, 10 gauge body, 10 gauge lid, mild steel, designed to withstand 7.5 psi without tank deformation
  • Lid fastening system hydraulic active gasket system
  • Transformer and reactor: all copper wound and vacuum pressure impregnated with polyester resin.

• 8 feet x 16 feet skid-mounted solution.
• Documentation: Full documentation set including operation manuals, test plans, piping diagrams, and more.

Seller Terms

• Salvex and the seller have the right to reject any and all offers.
• This product is sold AS IS, WHERE IS.
• Buyer is responsible for all taxes, duties, loading and freight charges.
• Seller does not offer any warranties or manufacturer warranties.
• Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
• It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.