Quantity: | 117 Units |
Manufacturer: | FMC View more items from this manufacturer |
Model: | Model |
Product Location: | Iraq |
This lot of X-mas Trees & Acessories (117 Units) is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
Description | Qty |
3 1/16"-15K XMAS TREE ASSY, INCLUDING THE ITEMS IN RED | 5 |
Lower Master Valve Block, S1, 11"-15000 Pounds Per Square Inch working pressure flange bottom x 3-1/16"-15000 Pounds Per Square Inch working pressure studded top, with bottom prep to seal on SBMS seal and hanger neck, with one SBMS monitor port, one hanger seal test port and one cavity test port, With one 3-1/16"-15000 Pounds Per Square Inch manual gate valve, Inconel 925 gate, seats and stem. Low alloy steel body material, with Inconel 625 cladding on all flow wetted surfaces, HH-360, Product Specification Level 3G, P-X | 1 |
Gate Valve, M150, 3-1/16"-15000 Pounds Per Square Inch working pressure flange end valves, Inconel 925 gate, seats and stem, low alloy steel body/bonnet material, with Inconel 625 cladding on all sealing and flow wetted surface area. HH-360, Product Specification Level 3G, P-X, PR 2 | 4 |
Gate Valve, M150, adapted for actuator, 3-1/16"-15000 Pounds Per Square Inch working pressure flange end valves, Inconel 925 gate, seats and stem. Low alloy steel body/bonnet material, with Inconel 625 cladding on all sealing and flow wetted surface areas, HH-360, Product Specification Level 3G, P-X, PR 2 | 3 |
Gate Valve hydraulic actuator, AA, Product Specification Level 1, P-U, PR2 | 3 |
Adapter Kit | 3 |
Cross Assy, 3-1/16"-15000 Pounds Per Square Inch working pressure studded top and bottom and flow outlets, low alloy body material with Inc 625 cladding on all flow wetted surfaces, HH-NL, Product Specification Level 3G, P-X | 1 |
Blind Flange 3-1/16"-15000 Pounds Per Square Inch working pressure with 9/16" Autoclave, 1-1/8"-12UNF thread. Product Specification Level 3, P-X (one installed as tree cap) | 3 |
Instrument flange, 3-1/16"-15000 Pounds Per Square Inch working pressure studded bottom x top complete with pipe plugs, with two 9/16" autoclave 1-1/8"-12UNF thread,HH-NL, Product Specification Level 3, P-X | 1 |
Tee Assembly, 3-1/16"-15000 Pounds Per Square Inch working pressure studded main run x one 2-1/16"-15000 Pounds Per Square Inch working pressure studded side outlet, low alloy steel body material with Inconel 625 cladding on all flow wetted surfaces, HH-NL, Product Specification Level 3G, P-X | 1 |
Gate Valve, M150, 2-1/16"-15000 Pounds Per Square Inch working pressure flange end valves, Inconel 925 gate, seats and Inconel 718 stem, low alloy steel body/bonnet material, with Inconel 625 cladding on all flow wetted surface area. HH-360, Product Specification Level 3G, P-X, PR 2 | 2 |
2-1/16"-15000 Pounds Per Square Inch Adapter Flange with 2" figure 2202 WECO UNION, with 9/16" Autoclave 1-1/8"-12UNF thread and nut, American Iron and Steel Institute 4130 body material, DD-NL, Product Specification Level 3, U | 1 |
Control Choke, 3-1/16" 15000 Pounds Per Square Inch flange connection. 100% linear trim, Tungsten Carbide external sleeve design, 3/4" maximum orifice, CV = 10. Z6 Sub-micron high grade Carbide. Knife edge flow sleeve for erosion resistance and energy disapation. Inconel 725 stem. American Iron and Steel Institute 4130 low alloy steel body material with Inconel 625 weld cladding for Hydrogen Sulphide /Carbon dioxide service to National Association of Corrosion Engineers MR-01-75/ISO 15156. Manual Operation. American Petroleum Institute 6A latest edition, HH-NL, Product Specification Level 3G, P-X, PR2 | 1 |
Bleeder Plug, 9/16" Autoclave | 3 |
Ring gasket, BX-154, Inconel 825 | 14 |
Ring gasket, BX-152, Inconel 825 | 3 |
Stud with two nuts for 3-1/16"15000 Pounds Per Square Inch flange connection | 40 |
Stud with two nuts for 2-1/16"15000 Pounds Per Square Inch flange connection | 16 |
Block and Bleed Needle Valve, 9/16" Autoclave, Male x female, Inconel 718 body material | 2 |
0-15000 Pounds Per Square Inch Pressure gauge, 9/16" Autoclave, Corrossion Resistant Alloy body material | 2 |
Nipples, 9/16" Autoclave, male x female,Corrossion Resistant Alloy material | 2 |
Hydraulic Override | 3 |
Fusible Lock Open Cap | 3 |