| ID: | 182996979 |
| Quantity: | 1 Compressor |
| Manufacturer: | Ajax View more items from this manufacturer |
| Model: | DPC 360 |
| Condition: | The buyer is responsible for the removal of units. The location does not have loading capabilities, so it will be for the buyer to coordinate the removal crew and pick up. This DPC 360 Horizontal Gas Engine Compressor is being sold "as-is, where-is" and with no representations, warranties, nor guarantees of any kind from the Seller nor Salvex Inc. The Seller has the right to accept or reject any and all offers. Buyer must verify quantity & quality at the time of, or before loading product. |
| Loading Costs: | Seller can dismantle and load onto the buyer's truck at no cost. |
| # of Bids: | 0 PLACE A BID |
| Product Location: | Tunisia |
| End Time: | Bid As Soon As Possible |
| Time Remaining: | Bid As Soon As Possible |
| Trader: | Felipe Bezerra +1 832-429-2840 (WhatsApp)ASK A QUESTION |
This DPC 360 Horizontal Gas Engine Compressor is no longer needed for the company's own operation and is being sold as an asset liquidation for its owner.
Compressor Data:
| Engine Bore & Stroke | (2) 15" x 16" |
| Compressor Stroke | 11" |
| Horsepower @400 RPM | 360 |
| Fuel Injection System Specifications: | |
| * Volume Tank | 5 Cu. Ft |
| * Hose or Pipe Size (Tank to Unit) | 2" 2" |
| Regulator (Fisher Size & Model) | 1" - 620 / 2"-630 |
| Regulator Spring No. | ID-8923/ W-192 |
| Maximum Inlet Pressure | 500 PSI / 1500 PSI |
| Tank Pressure Required | 5-12 PSI / 5-12 PSI |
| Regular Orifice Size: | |
| 10-50 Inlet Pressure | 1/2" |
| 51-150 Inlet Pressure | 1/2" |
| 151-500 Inlet Pressure | 3/8" |
| Air/ Gas Starting System, Cylinder Head: | |
| Air Pressure, Maximum | 250 PSI |
| Volume Required per Minute | 35-45 Cu. Ft. |
| Exhaust System: | |
| Exhaust Pipe Size | (2) 10" |
| Exhaust Pipe Length in Feet | 6400 /RPM |
| Muffler Outlet Size | 14" |
| Muffler- Min. to Max Silencing | |
| Burgess-Manning | (2) BMC-14, BMB-14, BMA-14 |
| Vanec | (2) 121-14, 131-14, 141-14 |
| Carson | #60-108 |
| Capacities: | |
| Crankcase Oil | 30 Gal. (Approx) |
| Oil Level - Distance from Top of Bed to Oil Surface | 28" |
| Power Cylinder Lubricating Oil | 7.2 Pints/ Day/ Cylinder |
| Cooler Cooling System | 125 Gal |
| Clearances: | |
| Crankpin Bearing - Engine | .003- .006 |
| Crankpin Bearing - Compressor | .003-.006 |
| Crosshead to Guide Bore (Feeler Clearance) | |
| Engine | .009- .013 |
| Compressor | .012- .015 |
| Piston Skirt to Power Cylinder | .027-.033 |
| Piston Ring End Gap | .115-.135 |
| Piston Ring to Side of 1st Two Grooves | .010- .0125 |
| to side of other Grooves | .008-.0105 |
| Torque Values, in Ft. Lbs | |
| Connecting Rod Bolts | 700 |
| Cylinder Head Stud Nuts | 740 |
| Piston Rod to Crosshead Nuts | 3200 |
| Special Tools | |
| Thimble, Engine Piston Rod | T-939-D |
| Thimble, Compressor Piston Rod | T-939-D |
| Wrench, Piston Rod Nut | A-2921 |
| *Not Furnished as Standard Equipment | |
| Operating Instructions are basically the same as DPC- 300 |
To place bids or to sell items on this site, you must first become a member.
Member Benefits
440 Louisiana Street
Suite 550
Houston, TX 77002
