Surplus- very little use, part of the items never used.
All the items are "AS IS, WHERE IS". Buyer is responsible for shipping and handling.
|# of Bids:||0 PLACE A BID|
|Original Wholesale Value:||$3,200,000.00|
|End Time:||Bid As Soon As Possible|
|Time Remaining:||Bid As Soon As Possible|
|Market Maker:||Ana Carolina Santos +1 832 384 9940ASK A QUESTION|
This lot of Lifting Frames is being sold by a company as a new and slightly used surplus in an asset liquidation sale to recover space and funds.
Details are listed below:
|ROLLS-ROYCE||21591 ATF011||ATF-011-01, ATF011-02, ATF-011-03||Equipment used to perform slick line and flex tube operations simultaneously with a carrying capacity of 350 tons. Dimensions: 15.300 mm Length x 2940 W x 3888 mm Height Equipment weight with skid 36.000 KG||3|
|ROLLS-ROYCE||7846-MB||7846-XG-010-001, 7846-XG-010-002, 7846-XG-010-003, 7846-XG-010-004, 7846-XG-010-005, 7846-XG-010-006,||Hydraulic unit responsible for hydraulic power generation for Lifting Frame operations. Brand JVC 444/14 lbs with 400 Kts Hydraulic Tank||6|
|ROLLS-ROYCE||7846-MB||C00090, C00091, C00092,||Control panel used to operate the Listing Frame||3|
|ROLLS-ROYCE||ROLLS-ROYCE||10047012, 10047011-1, 10047009, 1007005, 10047010-1, 10047049-1 , 10047016, 10047015, 1007051, 10047007, 10047002, 10047014, 1007013, 10047008||Inserts that are mounted inside the LF's main bushing for wedging the sub support lift.||14|
|ROLLS-ROYCE||ROLLS-ROYCE||1007032, 10047031, 1007029, 10047027, 1007030, 10047034, 10047037, 10047036, 1004738, 10047025, 10047026, 10047035, 10047033, 1007028||Inserts that are mounted inside the LF's main bushing for wedging the sub support lift.||14|
|ROLLS-ROYCE||ROLLS-ROYCE||10047010-2-3-4-5-6||Inserts that are mounted inside the LF's main bushing for wedging the sub support lift.||5|
|ROLLS-ROYCE||ROLLS-ROYCE||10070011-2-3-4-5-6||Inserts that are mounted inside the LF's main bushing for wedging the sub support lift.||5|
|ROLLS-ROYCE||ROLLS-ROYCE||10047049-2-3-4-5-6||Inserts that are mounted inside the LF's main bushing for wedging the sub support lift.||5|
|ROLLS-ROYCE||ROLLS-ROYCE||ATF-11 X 7||Transition flange between test head and column, holding capacity 350 tons.||2|
|ROLLS-ROYCE||ROLLS-ROYCE||ATF 7 X7||Flange de transição entre a cabeça de teste e coluna, capacidade de sustentação 350 ton.||2|
|ROLLS-ROYCE||ROLLS-ROYCE||ATF-1-2-3||Hose assembly used for mounting the hydraulic system between HPU, Panel and Lifting frame.||3|
|MHP||MPT-40MP||30000901, 3000902, 3000903||Manual and pneumatic hose clamping machine from 3/16 "to 1.1 / 4" (4 steel webs accompanied by 8 sets of individual nuts).||1|
|DNV||DNV||20002911, 20002912, 20002915, 20002942, 20003222.||Equipment shipping container, L 1.68 x W 1.64 X H 1.70, NS 20002911, 20002912, 20002915, 20002942, 20003222.||5|
|DNV||DNV||NS 20003223, 20003225, 20003238, 20003232.||Equipment shipping container, L 2.99 x W 2.45 X A 1.40, NS 20003223, 20003225, 20003238, 20003232.||4|
Lifting Frame Equipment has been designed for greater efficiency, security and concurrency Flexitube operations and Wireline in Completion / Workover operations, in semi-submersible platforms and drillships.
Were designed to API8C 350ton design where this is the maximum load suspended, connected to the top drive, during operation normal.
Provide functionality to configure the working window size at 12m, size with the expansion of the telescopic structure, allows you to increase the height of the work window to 17m. One of the advantages of the structure of these equipments is that the demobilization of the Injector, Stripper and BOP set, just laterally move the assembly.
These equipment consist of the following components:
Sub Elevation: Enables operation with manual, hydraulic or pneumatic lifts 5.1 / 2 ”or 6.5 / 8”, both for shoulder 18 and minimum load capacity of 350 tons.
Winch: Top winch with load capacity 20ton, with 50-meter cable and monitoring of charge. This component is used for handling the Flexitube and / or Wireline equipment in the assembly in the lifting frame.
Main Beams: Have telescopic configuration the that allows operating with vertical internal space of 12 or 17 meters.
Lifting Table: Has maximum load capacity 20 ton This component slides in/out of the well-center. And it provides the vertical movement with approximately 3 meters course. One of the advantages of this configuration is the possibility of decrease the load applied on the Test / Surface Flow Tree.
Lower Beam: The lower beam has an opening for passing the Test Head Sub, Surface Flow Tree or Terminal Head. For coupling of Test head, SFT or T. Head support is used where the split bushings are mounted. For flexibility of use of the equipment with the most various configurations with the following dimensions:
3.1 / 2 ”, 4, 4.1 / 2 ”, 5”, 5.1 / 2 ”, 5.7 / 8”, 6 ”, 6.5 / 8”, 7 ”, 7.5 / 8 ”, 8”, 8.5 / 8 ”, 9.5 / 8” and 10 ”. All with two shoulder settings: 18° and 90° according to API Spec 5CT.
To place bids or to sell items on this site, you must first become a member.