|Quantity:||1 Air Cooler|
This is a New asset. This was involved in an accident when the asset hit a bridge while was been transported causing damages and compromising its structure.
Being sold "AS IS, WHERE IS". Buyer is responsible for shipping and handling.
|# of Bids:||0 PLACE A BID|
|Product Location:||Louisiana, United States|
|End Time:||Bid As Soon As Possible|
|Time Remaining:||Bid As Soon As Possible|
|Market Maker:||Ana Santos +1 832 384 9940ASK A QUESTION|
This Air Cooler was involved in an insurance claim due to an accident and now is being sold by the Insurance company to collect funds from its investment.
|AIR COOLER SPEC SHEET|
|ITEM||SERVICE||MAWP||CODE||INLET||OUTLET||V/D/TEMP||DIM B||DIM C||LOUVERS||BUG SCREEN||DRIVE||FAN||FINISH|
|1||EJW (COMB) 74 GALS||150 PSI @ 350/-20F||NONE||6-150 RFWN||6-150 RFWN||1-3000# HALF
|ELECTRIC MOTOR DRIVE
SHEAVES, BELTS & GUARDS BY AXH
(3) 40HP, 1200RPM, 460/3/
|(3) 156" OD MOORE 10K S60 MAG VT HD
6- BLDS, 26.4° PA, RH ROTATION
154 RPM @ 36 HP REQ'D
2.6875" OD BORE
W/.625 x .3125 KWY
|2||AW (COMB) 125 GALS||150 PSI @ 350/-20F||NONE||6-150 RFWN||6-150 RFWN||1-3000# HALF
|3||IC 31.41 CU.FT.||845 PSI @ 350/-20F||ASME||8-600 RFWN||8-600 RFWN||1-6000#||*****||*****||AUTO|
|4||AC 23.13 CU.FT.||1440 PSI @ 350/-20F||ASME||6-900 RFWN||6-900 RFWN||1-6000#||*****||*****||AUTO|
The Type ZF is commonly used for large hp or process applications where remote off skid installation is required. The structural design ensures optimum sizing of end and center panels to support all dead loads of cooler sections and piping in accordance with API and is designed to withstand 125 mph wind loading. The self-contained design eliminates the need for costly field assembly and reduces transportation costs while meeting the most severe installation requirements.
AXH air-coolers Horizontal coolers are normally more efficient, forced draft designs but are alternately available in induced draft configurations with higher exit velocities. All are vertical airflow to minimize recirculation of hot discharge air. Models are available with single or multiple fans ranging in sizes from 24?to 192? Their design and size flexibility enables them to be used in a wide range of special applications.
The horizontal Type ZF design provides section accessibility in which all sections are equipped with lifting lugs and core guards for maximum protection of the exposed sections. Manual or automated aluminum shutters are an optional feature on all ZF models. These offers improved control of fluid outlet temperatures and operating efficiency by allowing independent louver adjustment over separate services.
Fans are normally driven by integrally suspended electric motors using HTD or V-belts but can be adapted to a variety of alternate type drives right range gears in larger fan hp applications, internal, direct, engine jackshaft, or hydraulic. All drives are integrally mounted, aligned, and test run prior to shipment.
Type ZF coolers offer convenient access to all components with fan, drive and bearings all located in cooler ambient air for increased operating life. For safety and easy maintenance, all units have individually removable fan and drive guards meeting all state and OSHA regulations louvers along including remote lubrication fittings.
Hail guards, bug screens, ladders & platforms, low noise fans, base enclosures, and warm air recirculation systems can be provided.
To place bids or to sell items on this site, you must first become a member.