| Quantity: | 1 Rig |
| Product Location: | Greece |
This Snubbing & Workover Rig '' is no longer required for the company's daily operations and is now available for sale. Contact trader for more information. See details listed below.
The King 500 is designed to operate on live wells or to do general workover operations.The unit is design for easy rig up, therefore each module weighting less than 15tons.The modules are designed as complete packages to minimize the rig up time.The unit is on cold stuck mode.
Technical Summary:
| Weight non-operational: | 90 tons (excl. skid beam frame) |
| Weight maximum operational load: | 380 tons (excl. skid beam frame) |
| Maximum pulling capacity: | 300 tons |
| Maximum snubbing capacity: | 100 tons |
| Regular range tubular: | 2 3/8" - 5 1/2" |
| Maximum OD tubular: | 13 3/8" (optional 5 1/2" - 13 3/8") |
| Maximum lengths tubular (in jack): | 13.7 m |
| Number of modules: | 12 (excl. power pack, BOPs etc.) |
| Heaviest rig module: | 15 tons |
| Maximum tripping speed: | 0.6 m/s |
| Power unit output: | 2 x 600 kW |
| Voltage: | 690V / 60Hz |
| Hydraulic pressure at max. pull: | 315 bar |
| Hydraulic pressure at main circuit: | 330 bar |
| Hydraulic pressure flow: | 1850 l/min |
| Rig floor elevation (normal): | 9.8 m |
| Rig floor area: | 39.6 m2 |
| Lifting capacity, pipe handler: | 2000 kg |
| Drilling torgue, max. continuous: | 47.5 kNm (35,000 ft-lbs) |
| Maximum rotation speed: | 200 RPM |
| Maximum through bore: | 600 mm |
| Service winch, SWL: | 4 ton |
440 Louisiana Street
Suite 590
Houston, TX 77002
