Helicopter Transportable Honghua Drilling Rigs 1500 HP (2 Units)

Seller Description

These  Honghua Drilling Rigs have not been used, are no longer needed for the company's operations and are being sold to recover funds.

Manufacturer: Honghua

DESCRIPTION

Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig with 3000 Kg loads, drilling depth capacity 12000 ft (4.000 m)

MAST

Model: JJ320/45-KH

Effective height of mast: 146 ft (44,5 m)

Static hook load capacity: 716.800 lbs (3.200 kN)

CROWN BLOCK

Model TC320, manufactured by HongHua

Max. Load: 716.800 Lbs. (3.200kN)

No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and 1x60”)

MONKEY BOARD

Able to work with DP 5” Range II, with Fall Protection Safety Harness System, Escape Line (Geronimo) and Ingersoll Rand Man Rider winch.

SUBSTRUCTURE

Max. Capacity of Rotary Table beam: (320 ton)

Setback load (Range II, 5” drill pipe): (3200 kN)

Height of drill floor: 7,5 m (25 ft)

Prepared to receive Walter System removable by

Pins, moveable in two axis “X” and “Y”.

ROTARY TABLE

Pin Drive type, manufactured by HongHua, with an opening diameter of 27-1/2" (698.5 mm), maximum rotary speed of 220 RPM and maximum static load of 1.000.000 lbs (4500 kN).

DRAW-WORKS

DiskBrake type, actuated by 2 electric motors with minimum 870 HP each and Bit Feeder system (with proximity switch for the crown Block and Rotary Table).

Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft) Drill Line 32 mm (1-1/4”) 6×19S IWRC EIPS/RRL.

Cat Head Model YM-16, manufactured by HongHua.

TRAVELLING BLOCK

Model YC315, manufactured by HongHua, with 6 Sheaves and maximum static load capacity of (3500kN) (790,000 lb).

HOOK

Model DG315, manufactured by HongHua, built to specification API Spec 8C, with a maximum static load capacity of 790,000 lb. (3.500 kN)

RIG FLOOR TOOLS

Inside BOP’s 3 ½IF – 4 ½IF, DP Elevator 3 ½” – 5”, pneumatic pipe spinner casing, manual slips. DP. 3 ½” – 5”, automatic DP. Slips, Casing: Spiders, side door, elevators, aux. elevators, slips, HFD. C56. Tong DP. Mud saver.

GENSETS

8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW/ 60Hz / 480V, with soundproof enclosures.

AUXILIAR GENERATORS

2 sets of Cooltech Generator Model KJ200E, rated 200 KVA(160 KW).

SWÍVEL

Model SL450, manufactured by HongHua, with a maximum static load of 1,000,000 lbs (4500 kN), maximum dynamic load (API Bearing Load) of 630,000 lbs (2800 kN) and maximum rotary speed of 300 RPM.

KELLY SPINNER

Model A6C-2 made by International, with maximum torque of 1,800 ft.pounds and maximum speed 150 RPM.

IRON ROUGHNECK

Model ST80C, manufactured by National Oilwell Varco (NOV) with Tubular OD Range of 4-1/4" to 8-1/2" (108-216mm) and Drill Pipe range of 3-1/2" to 5-1/2" (89-140 mm).

TONGS

− Drill Pipe Tongs type C, Model 060-273/48, with jaws from 2-7/8" to 5".

− Drill Pipe Tongs type DB, Model Q89-423/90, with jaws from 5" to 9-1/2".

−Casing Tongs type B, Model Q86-324/75 (from 3-3/8" to 12-3/4") and Model Q340-915/35 (from 13-3/8" to 20')

−Hydraulic Drill Pipe Power Tong made by ECKEL model 8-5/8 Hydra-Shift HT (with Hydraulic Backup)

BLOWOUT PREVENTERS

Three set of 13-5/8" 5,000 psi Type U, Single Ram BOP, Cameron style, with Pipe Rams 2-3/8", 2-7/8", 3-1/2", 5", 7", and 9-5/8". One set of 13-5/8" 5,000 psi Annular BOP, Shaffer style, with lower clamp connection, manufactured by Rongsheng.

BOP ACCUMULATOR

Model FKQ960-8, with 3000Psi (21Mpa)Working Pressure, 17 bottles with a total of 969 l capacity and Remote Panel on Rig Floor.

CHOKE MANIFOLD

Choke manifold 3-1/8” x 5,000 psi with two manual adjustable chokes Cameron 3-1/8” x 5,000 psi and hydraulic choke Cameron 3-1/8” x 5,000 psi, manufactured by King Dream.

MUD PUMPS

Qty: 3 sets heli-transportation Type: Triplex single-acting piston type. Max. the diameter of liner x stroke: 6.1/2” x 9” Max. strokes: 150 spm Rated Power: 596 KW (800 HP) Max.working pressure: 34,5MPa (5000 PSI)

SHALE SHAKER

Qty: 3 sets,

Model: Miswaco Meerkat PT Dual Motion Balanced Elliptical Motion Basic Fluid Capacity: 500 gpm (1.893 L/min) G-force linear motion up to 6,9 G’s G-force elliptical motion reduces (5,7G’s maximum)

MUD CLEANER

Model: Miswaco 212/6T4 Meerkat Pt. Desander hydrocyclones: 2 x 10”. Desilter hydrocyclones: 16 x 4”

DEGASSER

M-I SWACO Compact D-Gasser, capable of removing entrained gas (including H2S and corrosive oxygen) from drilling fluid, equipped withMission Magnum Degasser Feed Pump Model 8x6x14. Vertical Degasser with Working Pressure of 102 psi (0.7MPa) and diameter of the fluid inlet pipe 102 mm

DECANTER CENTRIFUGE

M-I SWACO Decanting Centrifuge Model 518, stainless steel rotating assembly, equipped with M-I SWACO Type II Progressive Cavity Centrifuge Feed Pump with a rated capacity of 22 gallons/100 revolutions@0 psi (82 liters/100 revolutions)

MUD TANKS

13 sets, each made of steel with cover. Total volume 190 m3 (1,200 bbl), equipped with single compartment Sand Trap tank, 50 bbls Slug Pit and 50 bbls Trip Tank.

CARGO HANDLING SYSTEM

Two MAEDAmodel LC1385-8B 6,000 kg capacity rating Telescoping Crawler Crane with Blade Attachment and Quick Disconnect and Two Tadano Mantis 3612, 16,000 kg capacity Telescopic Crawler Crane.

DRILLING INSTRUMENTATION

− SIEMENS Mud Pits volume sensors

−M/D TOTCO Drilling instr.: WOB Indicator, Connection

Torque Indicator, Tongs Torque Gauge, Mud Pump indicators, Bit Tracking System, Ton-Mile register, etc.

−HongHua Digital Drilling Recorder

−NOV Deviation Survey Double Recorder

−HONEYWELL Gas detection system

MISCELLANEOUS

−Diesel fuel reserve of 30 m3 (190 bbl).

−Water treatment System for filtering, purification, chlorination and pHcontrol for daily water consumption for the camps.

Seller Terms

• Salvex and the seller have the right to reject any and all offers.
• This product is sold AS IS, WHERE IS.
• Buyer is responsible for all taxes, duties, loading and freight charges.
• Seller does not offer any warranties or manufacturer warranties.
• Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
• It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.