Velan,Cameron, KVC Ball Valves, Check Valves, Control Valves, Butterfly Valves and More (924 Units)
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Valves and Fittings as part of a commercial repurposing strategy.
Velan,Cameron, KVC Ball Valves, Check Valves, Control Valves, Butterfly Valves and More (924 Units) Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Valves and Fittings as part of a commercial repurposing strategy.
| ID | : | 183051409 |
| Seller | : | |
| Seller Industry | : | |
| Quantity | : | 924 Units |
| Manufacturer | : | |
| Condition | : | Unused Unused Surplus Valves From various top valves manufacturers currently available for the sale in Bangladesh. For better understanding check the description list & Photos. All the items are "as is, where is". Buyer is responsible for loading, freight and logistics to final destination. |
| | : | |
| Product Location | : | Asia-Pacific |
| End Time | : | |
Item Description
This lot of Velan,KVC, Cameron Ball Valves, Check Valves, Fisher Control Valves, and More (924 Units) is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
| Generic Type of Item | Specific Type of Item | Item Description | Detail Description | Quantity |
| Mechanical | Valve | VALVE: NEEDLE | ORDERD FORM JBGP. VALVE: NEEDLE, P/N: SS-6HNBF4 , MFGR: SWAGELOK, TYPE: 2 WAY STRAIGHT, SIZE: 1/4 IN, DESIGN RATING: 10000 PSIG AT 100 DEG F, CONNECTION: FNPT, ORIFICE DIAMETER: 0.25 IN, OPERATED: HANDLE, BODY MATERIAL: SS, ADTL DESC: SERVICE HIGH PRESSURE UNION-BONNET NEEDLE VALVE, , CV: 0.86, USE FOR PROCESS AREA. QA: 02 AND 21. | 1 |
| Mechanical | Valve | VALVE: ET, ECONOMIZER | VALVE: CONTROL, TYPE: ET, TAG NUMBER: LV-351, MFGR: FISHER CONTROLS CO. VALVE SIZE: NPS 3 BODY STYLE: GLOBE, BODY MATERIAL: CF3M SST END CONNECTION: RF FLG, RATING: CL300 SHUTOFF: ANSI CL IV, PORT DIAMETER: 2 5/16 INCH BONNET STYLE: STYLE 1 EXTENSION, FLOW: DOWN TRIM STYLE: EQUAL PERCENT, TRIM NUMBER: 27 TRAVEL: 1 1/8 INCH, MAX RATED CV: 70.7, ACTUATOR TYPE: 667, SIZE: 45I ACTUATOR STYLE: SPRING & DIAPHRAGM OPERATING RANGE (STD): 0 TO 33 PSIG BENCH SET: 10 -30 PSI, FAIL ACTION: DOWN FAIL VALVE: CLOSE, POSITIONER TYPE: DVC6200, POSITIONER STYLE: I/P DIAGNOSTIC TIER: HART COMMUNICATING- HC INPUT SIGNAL: 4 TO 20 MA DC, ACTION: DIRECT TRANSMITTER: 4-20 MA POSITION TRANSMITTER OUTPUT GAUGES: YES, SUPPLY REGULATOR: 67CFR FACTORY MOUNTED: YES, I/P POSITIONER TAG: LY-351, USE FOR NEW ECONOMIZER SKID. | 1 |
| Mechanical | Valve | VALVE: CHECK, SIZE: 2 IN | 2 IN CHECK VALVE, FLUID GROUP 1, DN: 50, PN: 100, SIZE:2 IN, CLASS:600, YR: 2015, B 16.34 102.1 BAR 38DC, FIG M08-202E18-3EB-X320, DWG- N/A, DOC 10020898 MODA, BODY: WCB SET-410, DISC CA 15, MFGR: VELAN | 1 |
| Mechanical | Valve | VALVE: BALL | AIR FILTER, P/N: 252509140134, MFGR: AUTOCOM/PERKINS, TYPE: AIR FILTER, USED FOR PORTABLE CUMMINS GENERATOR ,MFGR: CUMMINS, ENGINE MODEL: 6BT5.9-G1, ENGINE SERIAL NO:87558474, CPL: 3124, ENGINE RPM: 1500, STAMFORD GENERATOR, GENERATOR SERIAL NO: 1308023, GENERATOR FRAME/CORE: LG110C1, GENERATOR CAPACITY: 110KVA/88KW, GENERATOR FREQUENCY:50HZ, GENERATOR RPM: 1500, GENERATOR VOLT-400/230.EQUIPMENT TAG: FE-GEN-031, QA: 00 | 2 |
| Mechanical | Valve | BALL VALVE | APOLLO 86A10501 STAINLESS STE EL 3-PIECE FULL PORT 1500 CWP N PT BALL VALVE COMES WITH MATERIA L TEST REPORT LEAD TIME: 7 TO 8 WE EKS PURPOSE OF USE: THESE MATERIA LS WILL BE USED IN GAS PROCESSING ARE A AS SPARE ITEM FOR TURBO-EXPANDE R PACKAGE. | 1 |
| Mechanical | Valve | VALVE: BALL | BALL VALVE, SS 3-PIECE 60 SERIES BALL VALVE, 0.406 IN. ORIFICE, REINFORCED PTFE SEATS, 1/2 IN. SWAGELOK TUBE FITTING, PART NUMBER: SS-63TS8, FLOW PATTERN: 2-WAY, SHUTOFF, STRAIGHT, SIZE: 1/2 IN. NOMINAL - 63 SERIES, CONNECTION TYPE: 1/2 IN. SWAGELOK TUBE FITTING, VALVE MATERIAL: STAINLESS STEEL, MANUFACTURE: SWAGELOK, QA: 21. | 2 |
| Mechanical | Valve | VALVE: BALL, DIA: 3 IN | BALL VALVE, P/N: 3 IN X 300; FULL PORT A216WCBSS316 FLG 300# RF , LEVER OPERATE; CL.300;FULL BORE; VELAN, F-11402-SSGA; PO-1263341-3; FE CONSTRUCTION, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 2 |
| Mechanical | Valve | BALL VALVE | BALL VALVE, P/N: NA, MFGR: BONNY FORGE, BALL VALVE SIZE: 3/4 INCH, 600 CLS. | 4 |
| Mechanical | Valve | VALVE: BLOW DOWN | BLOW DOWN VALVE-209, P/N: 370D6-24YRF23, ACTUATOR: BETTIS CBB520-SR60-CCW SOV: 10/17/2017 ASCO EV8316G382V, CERTIFICATION: HYDROSTATIC TEST, MTC, COC, GA DRAWING, FUNCTIONAL TEST REPORT OF ASSEMBLED VALVE | 1 |
| Mechanical | Valve | VALVE: CONTROL,TYPE NA | BODY MATERIAL NA,OPERATED NA,TEMPERATURE RATING NA,SOFTGOODS NA,SET PRESSURE NA,INLET SIZE NA,INLET CONNECTION NA,OUTLET SIZE NA,OUTLET CONNECTION NA,CONTROL VALVE:SPRING RANGE: 20-80 PSIG; MAX INLET PRESSURE: 200 PSIG; MAX EMERGENCY OUTLET PRESSURE: 88 PSI | 1 |
| Mechanical | Valve | VALVE: RELIEF,TYPE SAFETY | BODY MATERIAL NA,OPERATED PRESSURE,TEMPERATURE RATING NA,SOFTGOODS NA,SET PRESSURE 1415,INLET SIZE 1/2 IN,INLET CONNECTION 900/1500 CLASS,OUTLET SIZE 2 IN,OUTLET CONNECTION 150 CLASS,PSV FOR INLET GAS FILTER; INLET: 1/2 IN, 900/1500 CLASS; OUTLET: 2 IN, 150 CLASS. SN CE-43832-1-A10R; CRN: OG2369.5C; SET PRESSURE: 1415 | 1 |
| Mechanical | Valve | VALVE: BALL, SIZE 1 IN | BODY MATERIAL PVC, TRIM TRUE UNION, VALVE, BALL PVC 1 IN SCH. 80 TRUE UNION, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 2 |
| Mechanical | Valve | VALVE: | BRAKE CIRCUIT VALVE, P/N: 05.0343.0084.CRE, MACHINE: MOBILE CRANE, MAKE: TEREX, MODEL: RC60, SERIAL NUMBER: 606023, MANUFACTURING YEAR: 2012, TOTAL WEIGHT: 42000 KG, MAXI. LIFTING CAPACITY: 60 TON, ENGINE MODEL: CUMMINS QSB 6.7, NUMBER OF CYLINDER: 6 CYLINDERS, ENGINE PART NUMBER: 09.0601.0280, RATED POWER: 164 KW @ 2200 RPM, MAXIMUM GROSS TORQUE: 945 NM @ 1/MIN, FUEL TANK CAPACITY: 300 LITERS,6 X 6 WITH TORQUE CONVERTER, 4WD, FRONT WHEEL STEERING, FOUR WHEEL STEERING CONCENTRIC, FOUR WHEEL CRAB, 2 DOUBLE GEAR PUMPS, QACode:00:NO DOCS REQD. RECPT INSP ONLY | 1 |
| Mechanical | Valve | BUTTERFLY VALVE | BUTTERFLY VALVE SIZE: 24INCH MAKE : VANESSA MODEL: 30,000 SERIE S TRIM/BOM: AV01 TYPE: TRIPL E OFFSET STYLE: DOUBLE-FLANGED END CONN: ASME 600 RF BODY: ASTM A352 LCC DISC: ASTM A 352 LCC STEM: ASTM A479 UN S S41000 (13 CR SS) SEAT: ST ELLITE 21 WELD OVERLAY ON BODY PACKING: GRAPHITE FIRESAF E: YES MAKE: BETTIS ACTUATOR M ODEL: G5028-SR4(CW)-10-30 F AILURE MODE: FAIL-CLOSE CONTROL : SYSTEM: A REMARKS: OPENING : | 1 |
| Mechanical | Valve | CHECK VALVE | C37N-9K BIS CHECK VALVE,SS316, 3/8IN NPT (MI: 3938), PART NO.: C37N-9K INCLUDED : CERTIFICATE OF CONFORMANCE LEAD TIME : 1-2 WEEKS ( SUBJECT TO PRIOR SALES ) PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE. | 2 |
| Mechanical | Valve | CAGE Valve | CAGE VALVE, P/N: 20A3247X012, MFGR: FISHER, Size: 8 Inch (MATL AS PER MODEL),CAGE,LINEAR. VALVE ASSEMBLY, ACTUATOR TYPE: 657, SIZE: 70I, USED IN MBGP PCV-2001. | 1 |
| Mechanical | Valve | CAGE: VALVE | CAGE, P/N-CB7CU-1 H-900, MFGR-FISHER, FOR SPURLINE PRESSURE CONTROL VALVE. | 1 |
| Mechanical | Valve | CAGE:VALVE | CAGE: VALVE, NEW P/N: 323-01530-128MEP-02-2, PREVIOUS P/N: 248_LINEAR, MFGR: N-LINE VALVES, TYPE: 4 AFI, ADDI DESC: 1500# AND 2500# 128 MEP Flow Cage, T6C-FF-0.5, DRAWING ID: 102-01530-128MEP REVISION: A, USED FOR BY-13 TO 26 AUTO CHOKE (EXCEPT BY-23), QA: 00. | 6 |
| Mechanical | Valve | CAGE: VALVE | CAGE: VALVE, P/N: 0107508, MFGR: MOKVELD, CAGE, POSITION NUMBER: 39.01, MATERIAL SPECIFICATION: TC CO-BINDER, USE FOR CHOKE VALVE AT BY-23, TYPE: RZD-RMX2-TC-2, SIZE/CLASS: 8 IN/CLASS 2500 HB, BODY MATERIAL: ASTM A487 GR.1 CL.C, VALVE SERIAL: 60324-001, TAG: FV-84605, QA: 13. | 4 |
| Mechanical | Valve | CAGE: VALVE | CAGE: VALVE, P/N: 28012-003 ,MFGR: MASTERFLO VALVE INCO, VALVE STYLE: CHOKE, VALVE SIZE: P5E, MATL: STELLITE, USE FOR SKID, BY-1 HIPPS VALVE PKG. QA: 21. | 1 |
| Mechanical | Valve | CAGE:VALVE | CAGE:VALVE, P/N:23A8915X032, MFGR: FISHER, VALVE SIZE AS PER MODEL, SIZE AS PER MODEL, MATL AS PER MODEL, CAGE, WHISPER I; FOR VALVE SERIAL NO. 0021643770, TYPE: ET, SIZE: 4 IN, PORT SIZE: 4 3/8 IN &ACTUATOR SERIAL NO.:0021643770, TYPE: 667, SIZE: 45, TRAVEL: 2 IN, MANUFACTURE: FISHER CONTROLS CO, USED FOR MMS CONDY SHIPPING LINE PCV-41001 & 41003. | 2 |
| Mechanical | Valve | VALVE:CHECK, TYPE NON-RETURN | CHECK VALVE, FIGURE NO: H90SPR2-169, S/N: D010438, MFGR: CRANE, SIZE: 2 INCH, ASI-SER-900, CWP PSI-2200, MAX TEMP: 1000F, DOU-CHECK-11, CRANE, USE FOR TEG DISCHARGE LINE.; 05:PRESSURE/ TEMP CERT OR CHART | 1 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: (CS) A105 SW TYPE-PISTON, MFGR: BONNY FORGE, VALVE - CHECK;3/4INCH (DN20);N/A;1500#;VALVE CAPIM NO CLEASH1 REF.ER TO ATTACHED PURCHASING DESCRIPTION;SW; VENDOR OFFER: BONNY FORGE , 9HL-41 VENDOR COMMENT: LIFT CHECK, PISTON TYPE A105N/13CR, HF (T#8) 1500# SW | 1 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: CU385/HP, MFGR: NA, CHECK VALVE 3/8INCH 10KATMANUFACTURER-OLIVERATPART NO.CV38S-HP | 2 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: CV255/HP, MFGR: NA, DUMP VALE ATMFGR-BIFOLD ATP/N:FP15E/L2/04/32/V-02 | 1 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: FIG NO-8025070416, BODY-LF2, CWP 100 F-6170PSI, API602, TRIM-16. SW ENDS, MFGR: UF, 1 2500# CLASS, ITCS BODY, API TRIM #12, BC, SWING CHECK, HUB CONNECTOR VENDOR OFFERING: 1INCH 2500# SW CHECK VALVE, SWING TYPE, SELF-SEALING (IN LIEU OF BOLTED COVER), A350 GR. LF2 LOW TEMP. CARBON STEEL BODY, 316SS TRIM, STELLITE SEAT (API TRIM NO. 12), API 602, B16.11 | 19 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: FIG NO-8025070416, BODY-LF2, CWP 100 F-6170PSI, API602, TRIM-16. SW ENDS, MFGR: UF, 1-1/2INCH 2500# CLASS, ITCS BODY, API TRIM #12, BC, SWING CHECK, HUB CONNECTOR VENDOR OFFERING: 1-1/2INCH 2500# SW CHECK VALVE, SWING TYPE, SELF-SEALING (IN LIEU OF BOLTED COVER), A350 GR. LF2 LOW TEMP. CARBON STEEL BODY, 316SS TRIM, STELLITE SEAT (API TRIM NO. 12), API 602, B16.11 | 20 |
| Mechanical | Valve | CHECK VALVE | CHECK VALVE, P/N: FIG NO-8025070416, BODY-LF2, CWP 100 F-6170PSI, API602, TRIM-16. SW ENDS, MFGR: UF, 3/4INCH 2500# CLASS, ITCS BODY, API TRIM #12, BC, SWING CHECK, HUB CONNECTOR VENDOR OFFERING: 3/4INCH 2500# SW CHECK VALVE, SWING TYPE, SELF-SEALING (IN LIEU OF BOLTED COVER), A350 GR. LF2 LOW TEMP. CARBON STEEL BODY, 316SS TRIM, STELLITE SEAT (API TRIM NO. 12), API 602, B16.11 | 20 |
| Mechanical | Valve | VALVE: CHOKE | CHOKE VALVE, P/N: 2001H, MFGR: STRATAFLO, 400 3/8 IN, BRASS CHECK VALVE WITH STAINLESS STEEL POPPET FUEL LINE NON RETURN CHECK VALVE USE FOR DIESEL GENERATOR G-702. | 2 |
| Mechanical | Valve | CHOKE: VALVE | CHOKE VALVE, TYPE: CHOCKE VALVE@ K301A/B, P/N.: 61-2666, OPERATION: PROPANE COMPRESSOR | 1 |
| Mechanical | Valve | VALVE:NEEDLE, SIZE 1/2 INCH | CONN 1/2 FNPT AND 1/2 MNPT, BODY MATL SS316, 1/2 OLIVER VALVES, 6000PSI, 316SS, TYPE G12FMS/NA/PP, QACode:01:DECLARATION OF CONFORMITY | 12 |
| Mechanical | Valve | VALVE:BALL TYPE:C.E BALL VALVE | CONN:FLANGE BODY MATL:CAST CARBON STEEL TEMP RATING:TEMP: -20 TO 450 DEG F PARTS NO. 300SCTAZM-FS 3 C.E. BALL VALVE. SIZE-3" CLASS 300 RF. RP. TEMP: -20 TO 450 DEG F. BODY: CAST CARBON STEEL, ASTM A216 GR WCB. BALL-316SS, STEM-316SS, SEATS- RPTFE. BORE PORT-SINGLE REDUCED PORT. FLEXIBLE GRAFITE. DESIGN STANDARD-API608, ENDS STANDARD-ASME B16.5, DIMENSIONAL STANDARD-ASMEB 16.10 SHORT PATRERN. | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:1 IN | CONN:FNPT BODY MATL:CF-8M TRIM:NA PORT:NA OPERATED:ACTUATOR TEMP RATING:NA SOFTGOODS:NA CONFIG:1-WAY VALVE INFORMATION: BALL VALVE, MODEL:V424H506G,1 INCH, TREADED FNPT CONNECTION, SS BODY, EXTRA INFO: DN25-1 NPT, F04/F05, 1.4408-CF8M, PN63-1000, MANUFACTURER: OMAL AUTOMATION,USES FOR WEST PAD INSTRUMENT AIR DRYER (WP-ZZZ-8680/8685). | 2 |
| Mechanical | Valve | VALVE:CONTROL TYPE:NA SET | CONN:NA OUTLET SIZE:NA OUTLET CONN:NA CLASS:NA DESIGN RATING:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA 6200N01K 4-WAY CONTROL VALVE MFR: GAS COMPRESSION SYSTEMS USED FOR MCS TURBINE SEAL GAS BOOSTER PUMP | 2 |
| Mechanical | Valve | VALVE:CONTROL TYPE:8590 SET | CONN:NA OUTLET SIZE:NA OUTLET CONN:NA CLASS:NA DESIGN RATING:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA VALVE, P/N: NPS 10 8590, MFGR: EMERSON, NPS 10 8590 PROCESS LEVEL 3 VALVE, SIZE: NPS 10, VALVE TYPE: 8590 BODY MATERIAL: WCC STEEL BODY STYLE: BUTTERFLY, LUGGED END CONNECTION: RF FLG RATING: CL600 SHUTOFF: ANSI CL VI SEAL MATERIAL: ETFE/FKM BU RING DISK MATERIAL: CF8M SST/CRPL SHAFT MATERIAL: S17400 SST PACKING: PTFE SHAFT STYLE: SPLINED SHAFT SIZE: 1 3/4 INCH SEAL RETAINER MATERIAL: STEEL CHARACTERISTIC: LINEAR (REPLACEMENT AGAINST A11 VALVE), USED AS SALES LINE BACK PRESSURE CONTROL VALVE TAG: PV-201 ( JB-PV-201), QA: 00 | 1 |
| Mechanical | Valve | VALVE:SAFETY TYPE:SAFETY SET | CONN:NA OUTLET SIZE:NA OUTLET CONN:NA DESIGN RATING:NA ORIFICE:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA PRESSURE SAFETY VALVE: PSV, P/N: 19096LCO-1-S3-DA-31-MT-FT-GS, MFGR: DRESSER CONSOLIDATED, MODEL: 19096LCO-1-S3-DA-31-MT-FT-GS, SERIAL NO: TP51388, TP51389, , TYPE: PRESSURE RELIEF, SET PRESS: 290 PSIG, DESIGN CAPACITY: 516 SCFM, INLET: FLANGED-1/2 MNPT, OUTLET: 1 IN FNPT,ITEM_P/N:19096LCO-1-S3-DA-31-MT-FT-GS | 2 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:NA | CONS CONN:FE CONS BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE, 1 1/2 INCH, 800 CLASS, THREADED, NPT LF 2N, BONNEY FORGE, MFGR: NA, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 2 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:NA | CONS CONN:FE CONS BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE, 10 INCH, 600 CLASS, RF, MFGR: NA, PO-1332724, LINE ITEM- 1, FE CONST PROJECT SURP | 3 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:NA | CONS CONN:FE CONS BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE, 2 INCH, 150 CLASS, BODY WCB, SEAT MPTFE, STEM 316, MFGR: NA, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 5 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:NA | CONS CONN:FE CONS BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE, 2 INCH, 800 CLASS, THREADED, WOG 1000, BODY 105 N, MFGR: NA, PO- 27084, LINE ITEM- NA, FE CONST PROJECT SURP | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:NA SIZE:NS | CONS CONN:FE CONS BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE, 3/4 INCH, 800 CLASS, THREADED, MFGR: NA, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 4 |
| Mechanical | Valve | VALVE:GATE TYPE:THREADED | CONS DESIGN RATING:NA CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 1/2 INCH, 800 CLASS, THREADED, F16 BODY A105 N, BONNEY FORGE, MFGR: ITALY, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 2 |
| Mechanical | Valve | VALVE: CONTROL | CONTROL VALVE, MODEL: 667-D LEVEL CONTROL VALVE, MFGR: FISHER CONTROLS, LINE SIZE: 2 IN, TYPE OF VALVE BODY: GLOBE, D. BODY: 2 IN, PORT SIZE: 3/4 IN. END CONNECTION AND RATING: CL600/1500 PSI CWP, RF, BODY MATERIALS: STL. PACKING MATERIALS: PTFE, PLUG: SST/HF, SEAT: TO. SERIAL: 16803173G, ACTUATOR: DVC 6010 DIGITAL VALVE POSITIONER WITH INTEGRAL I/P TRANSDUCER. 4-20 MA INPUT, HART PROTOCOL, OUT PUT - 6-30 PSIG. MODEL NO. AND SIZE: 667/40, TYPE OF ACTUATOR: 667, BENSET: 14-30 PSIG, TRAVEL 3/4 IN, FAIL POSITION: FAIL CLOSED, OPERATING PRESSURE: 6-30 PSIG. TFE PACKING-3/8 IN TAPER TRIM, CSA EXPLOSITION PROOF, DVC CONTROLLER MODEL: DVC-6010, SERIAL: 0021415687, USING FOR MBGP HP SEPARATOR WATER SIDE. QA: 00. | 1 |
| Mechanical | Valve | VALVE: | COUNTERBALANCE VALVE - CBBDLJN 4500, P/N: 216256GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: | COUNTERBALANCE VALVE - CBDBLHN 3500, P/N:216257GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: | COUNTERBALANCE VALVE - CWEGLGN- 4500, P/N:216258GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: TYPE SHUTDOWN VALVE, | DESIGN RATING (SDV-33632/33611/33304/33312), CONNECTION NA, BODY MATERIAL NA, OPERATED NA, TEMPERATURE RATING NA, SOFTGOODS NA, STYLE NA, CONFIGURATION NA, (SDV-33632/33611/33304/33312) 2'' 150# RF SHUTDOWN VALVE - GROVE, P/N V4D02F01FF002A0, MFG GROVE ( NOTE: SUPPLIER : ENERFLEX SYSTEMS LTD.) | 3 |
| Mechanical | Valve | VALVE:NEEDLE, TYPE BALL STEM | DESIGN RATING 6000 PSIG AT 100 F, CONN MNPT X FNPT, ORIFICE DIA 0.437 IN, BODY MATL SS 316, OPERATED ALUMINUM BAR HANDLE, SOFTGOODS PTFE, SEVERE SERVICE UNION BONNET NEEDLE VALVE, 1.9 CV. | 3 |
| Mechanical | Valve | VALVE: RELIEF,TYPE POP OFF | DESIGN RATING 770 PSI,BODY MATERIAL CS,TRIM SS TRIM,OPERATED PRESSURE,TEMP RATING -40 TO 150 DEG F,SET PRESSURE 350,INLET SIZE 1 IN FLG,INLET CONNECTION 1 IN FLG,OUTLET SIZE 2 IN FLG,PRESSURE SAFETY VALVE, (CONSOLIDATED), MODEL NO: 1910-00DC-2-CC-TD-34-RF-SS-HP, INLET CONNECTION: 1INCHX2INCH 300#, SET PRESSURE - 350 PSI, SERIAL NO: SA-42440, MFG- DRESSER. | 2 |
| Mechanical | Valve | VALVE: TYPE SAMPLE, | DESIGN RATING SCH 80, BODY MATERIAL PVC, VALVE SAMPLE 1/4 IN PVC SCH 80, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 1 |
| Mechanical | Valve | VALVE:GATE TYPE:NA SIZE:NA | DESIGN RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 1 INCH, 1500 CLASS, SW TYPE, FIG 9H 105, BODY A105 N, BONNEY FORGE, MFGR: ITALY, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP MFGR: NA, PO-1346840, FE CONST PROJECT SURP | 1 |
| Mechanical | Valve | VALVE:GATE TYPE:NA SIZE:NA | DESIGN RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 2 INCH, 150 CLASS, BODY WCB, RF, DISC CR13, 285 PSIG, API TRIM, MFGR: NA, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 4 |
| Mechanical | Valve | VALVE:GATE TYPE:NS SIZE:NA | DESIGN RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 2 INCH, 600 CLASS, API 600, 1480 PSIG, WCB, W 320, MFGR: NA, PO- 1264670, LINE ITEM- NA, FE CONST PROJECT SURP | 2 |
| Mechanical | Valve | VALVE:BALL TYPE:FLANGE JOINT | DESIGN RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE TYPE: FLANGE JOINT,SIZE:3/4 INCH X 150 CLASS,FIG 150SCTDZM-FS,BODY,WCB,TRIM,316,SEAT PTFE,285 PSI,285 MFGR:KITZ TAIWAN.PO-NO,FE CONST SURP. | 3 |
| Mechanical | Valve | VALVE:BALL TYPE:FLANGE JOINT | DESIGN RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE TYPE:FLANGE JOINT,SIZE:1 INCH X 150 CLASS,FIG:00302,SSE MODEL:W 330 BS 5351,STEM 316,TEMP 450 F 285 PSIG,MFGR:VELAN TAIWAN.PO-NO,FE CONST SURP. | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:TRUNNION | DESIGN RATING:NA CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA GORVE BALL VALVE, TYPE: TRUNNION, P/N: 02X02_RF_B4_600_103_A, MFGR: CAMERAON, VALVE SIZE: 2 IN (50MM), NOMINAL BORE SIZE: 02 IN (50 MM), PRESSURE CLASS: ASME 600 (100 PN), ACTUATOR SPECIFICATION: BRAND: BETTIS, ACTUATED VALVE SIZE: 2X2, MODEL:CBB520-SR60-CCW, TYPE: SCOTCH YOKE, STROKING TIME: NON, FAIL POSITION (SECS):10, STROKING TIME FAIL POSITION (SECS)-6, CONTROL SYSTEM TYPE: TYPE 1. PO NUMBER:1333713, LINE ITEM#3 | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:TRUNNION | DESIGN RATING:NA CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA GROVE BALL VALVE, TYPE: TRUNNION, P/N:10X08_RF_B5_900_103_A, MFGR: CAMERON, VALVE SIZE: 10 IN (250MM), NOMINAL BORE SIZE: 08 IN (200 MM), PRESSURE CLASS: ASME 900 (150 PN), END CONNECTION: FLANGEDRAISED FACE, MODEL: B-5, TRIM: STAINLESS STEEL TRIM/D0103, METHOD OF OPERATION: ACTUATOR, PAINT/COATING SHOP PRIMER. ACTUATOR SPECIFICATION: BRAND: BETTIS, ACTUATED VALVE SIZE: 10X08, MODEL: GC01014-SR0-CW, TYPE: SCOTCH YOKE, STROKING TIME: NON, FAIL POSITION (SECS): 50, STROKING TIME: FAIL POSITION (SECS)-30, CONTROL SYSTEM TYPE: TYPE 1. PO NUMBER:1333713, LINE ITEM#2 | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:TRUNNION | DESIGN RATING:NA CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA GROVE BALL VALVE, TYPE: TRUNNION, P/N: 03X02_RF_B4_300_103_A, MFGR: CAMERON, VALVE SIZE 3 IN (80MM), NOMINAL BORE SIZE: 2 IN (50 MM), PRESSURE CLASS: ASME 300 (50 PN), END CONNECTION: FLANGED RAISED FACE, MODEL B-4,TRIM: STAINLESS STEEL TRIM/D0103, METHOD OF OPERATION ACTUATOR, PAINT/COATING SHOP PRIMER ACTUATOR SPECIFICATION: BRAND: BETTIS, ACTUATED VALVE SIZE:03X02, MODEL: CBB415-SR80-CW, TYPE: SCOTCH YOKE, STROKING: NON FAIL POSITION (SECS): 15, STROKING TIME: FAIL POSITION (SECS)-09, CONTROL SYSTEM TYPE: TYPE 1. PO NUMBER:1333713, LINE ITEM#1. | 1 |
| Mechanical | Valve | VALVE:BALL TYPE:TRUNNION | DESIGN RATING:NA CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA GROVE, VALVE, BALL, TRUNNION, P/N: 16X14_RF_B5_600_103_A, MFGR: CAMERON, VALVE SIZE: 16 IN (400MM), NOMINAL BORE SIZE 14 IN (350 MM), PRESSURE CLASS: ASME 600 (100 PN), END CONNECTION: FLANGED RAISED FACE, MODEL B-5, TRIM: STAINLESS STEEL TRIM/D0103, METHOD OF OPERATION ACTUATOR, PAINT/COATING SHOP PRIMER ACTUATOR SPECIFICATION: BRAND: BETTIS, ACTUATED VALVE SIZE: 16 X 14, MODEL: GC3014-SR4-CW, TYPE: SCOTCH YOKE, STROKING TIME: NON FAIL POSITION (SECS): 80, STROKING TIME: FAIL POSITION(SECS)-48, CONTROL SYSTEM TYPE: TYPE 1 PO NUMBER:1333713, LINE ITEM#7 | 1 |
| Mechanical | Valve | VALVE:DRAIN | DRAIN VALVE, SIZE: INCH NPT, P/N: 112665 , DRVL 1/2NPT 414 VESTA BA10N4-80 T1, MFGR: FORUM ENERGY TECHNOLOGIES, APPLICATION: PBV BALL VALVE. | 3 |
| Mechanical | Valve | VALVE: SOLENOID | ELECTRICAL RATING VOLTS/HZ 12 DC, PRESSURE RATING PSI AIR/GAS/LQ 150,PSI OIL 2-4, VALVE, SOLENOID, 1 IN , VOLTS/HZ 12 DC, AMPS 0.750, PSI AIR/GAS 150, PSI OIL 2-4, 9 WATTS, PSI LIQUID 150, F/ITT A-C CENTRIFUGAL FIRE PUMP SIZE 8 X 6 X 18F TYPE 8200, 1,000 GPM, S/N 97-231014-01-01, P/N S211AF15N5FG9E, MFG. GC VALVES | 2 |
| Mechanical | Valve | VALVE: TYPE VALVE, EXHAUST | EXHAUST VALVE FOR KUBOTA GENERATOR | 2 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: ASTM A105NATTHREADED BOTH END, MFGR: VELAN, FORGED CARBON STEEL VALVES: ATGATE TYPE; 3/4INCH; GATE VALVE, WELDED BONNET API 602 S.W. X FNPT CS ASTM A105N (NORMALIZED) CERTIFIED LOW EMISSION HANDWHEEL OPERATED FLEXIBLE GRAPHITE PACKING. 1500# SOLID WEDGE, REDUCED BORE, O.S. & Y. TRIM #8 ATATVENDOR OFFER: BOLT BONNET, TRIM#5 ATNPT X NPT; VELAN, S-3054B-02TS; | 2 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 ASTM A105N SWXTHREADED, MFGR: KVC (UK) LTD, 3/4INCH ANSI 1500 NPT SCREWED ENDS REDUCED BORE GATE VALVE TO API 602 BOLTED BONNET OSNY RISING STEM SOLID WEDGE HANDWHEEL OPERATED NACE MR.01.75 ATBODY: ASTM A105N ATTRIM: 13%CR SS + HARDFACED STELLITE SEAT ATKVC (UK) OR BONNEY FORGE (ITALY) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** ATATBRAND: KVC / BONNEY | 5 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 (CS) API-602 3705PSI AT 100F SWXTHREADED, MFGR: KVC (UK) LTD, 1-1/2INCH ANSI 1500 NPT SCREWED ENDS REDUCED BORE GATE VALVE TO API 602 BOLTED BONNET OSNY RISING ATSTEM SOLID WEDGE HANDWHEEL OPERATED ATBODY: ASTM A105N ATTRIM: 13%CR SS + HARDFACED STELLITE SEAT ATKVC (UK) OR BONNEY FORGE (ITALY) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** AT**NOTE: VALVES SHALL BE LOCAL MODIFIED FROM BOTH ENDS FNPT TO ONE END SW, ONE END FNPT** | 2 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 (CS) API-602 SW BOTH END, MFGR: ISUKA, SIZE: 3/4 INCH, 1500 CLS, GATE VALVE STREM 13CR | 4 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 (CS) THHREADED BOTH END, MFGR: VELAN, GATE VALVE 3/4INCH 800# | 1 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 API-602 DISC/STEAM-13CR,SEAT-HF, MFGR: ISUKA, GATE VALVE 1-1/2INCH 800# | 2 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: A105 ASTM A105N SW BOTH END, MFGR: KVC (UK) LTD, 1INCH ANSI 1500 SOCKET WELD ENDS REDUCED BORE GATE VALVE TO API 602 BOLTED BONNET OSNY RISING STEM SOLID WEDGE HANDWHEEL OPERATED NACE MR.01.75 ATBODY: ASTM A105N ATTRIM: 13%CR SS + HARDFACED STELLITE SEAT ATKVC (UK) OR BONNEY FORGE (ITALY) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** ATATBRAND:KVC / BONNEY | 16 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: API 602 A105NATSW BOTH END, MFGR: KVC (UK) LTD, 1-1/2INCH ANSI 1500 SOCKET WELD ENDS REDUCED BORE GATE VALVE TO API 602 BOLTED BONNET OSNY RISING STEM SOLID WEDGE HANDWHEEL OPERATED ATBODY : A105N WEDGE : 13% CR SS STEM : 410 SS SEAT : STELLITE PACKING: GRAPHITE ATGASKET : SPIRALWOUND BOLTING: A193 B7 / A194 2H ATKVC (UK) OR BONNEY FORGE (ITALY) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** ATATBRAND: KVC / BONNEY | 2 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: BODY-A105, SEAT/DISCK-316L 1437 BAR, MFGR: AF, GATE;CLASS, 1500 RF, CS BODY, BB, ASTM A105;1. 1/2INCH; ATATVENDOR OFFER: FORGED CARBON A105N BOLTED BONNET OS & Y FLANGE END 1500# RF 1 1/2INCH ATATBRAND: AFEL - ITALY / BONNEY ATREVISED BRAND: LVF-ITALY | 3 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: FLANGE TYPE API-600, MFGR: VELAN, VALVE - GATE;2INCH (DN50);N/A;150#;VALVE CAPIM NO GAAARH1F REF.ER TO ATTACHED PURCHASING DESCRIPTION;;RF; VENDOR OFFER: VELAN, F-0064C-02TY VENDOR COMMENT: GATE VALVE FULL PORT A216 WCB/13CR, HF (T#8) FLG 150# RF BB OS&Y | 1 |
| Mechanical | Valve | GATE VALVE | GATE VALVE, P/N: FLANGE TYPE, MFGR: AF, GATE;CLASS, 1500 RF, CS BODY, WB, ASTM A105;1INCH; ATATVENDOR OFFER: OFFER FORGED CARBON A105N BOLTED BONNET OS & Y FLANGE END 1500# RF 1INCH ATATBRAND: AFEL - ITALY / BONNEY ATREVISED BRAND: LVF-ITALY | 2 |
| Mechanical | Valve | GLOBE VALVE | GLOBE VALVE, P/N: FIG NO-702507416, BODY-LF2 CWP 100 F-6170PSI, API-602, TRIM-16 SW ENDS, MFGR: UF, 1-1/2INCH 2500# CLASS, GLOBE VALVE, ITCS BODY, API TRIM #12, BC, HUB CONNECTOR VENDOR OFFERING: 1-1/2INCH 2500# SW GLOBE VALVE, SELF-SEALING (IN LIEU OF BOLTED BONNET), A350 GR. LF2 LOW TEMP. CARBON STEEL BODY, 316SS TRIM, STELLITE SEAT (API TRIM NO. 12), API 602, B16.22, HANDWHEEL OPERATED | 20 |
| Mechanical | Valve | GLOBE VALVE | GLOBE VALVE, P/N: FIG NO-702507416, BODY-LF2 CWP 100 F-6170PSI, API-602, TRIM-16 SW ENDS, MFGR: UF, 3/4INCH 2500# CLASS, GLOBE VALVE, ITCS BODY, API TRIM #12, BC, HUB CONNECTOR VENDOR OFFERING: 3/4INCH 2500# SW GLOBE VALVE, SELF-SEALING (IN LIEU OF BOLTED BONNET), A350 GR. LF2 LOW TEMP. CARBON STEEL BODY, 316SS TRIM, STELLITE SEAT (API TRIM NO. 12), API 602, B16.22, HANDWHEEL OPERATED | 20 |
| Mechanical | Valve | GLOBE VALVE | GLOBE VALVE, P/N: FIG NO-9HL307, BODY-A105, WP 100 F-03705PSI, SW ENDS, MFGR: BONNY FORGE, GLOBE;CLASS, 1500 SW CS STRAIGHT TYPE, WB ASTM A105;1. 1/2INCH; ATATVENDOR OFFER: 1-1/2INCH ANSI 1500 SOCKET WELD ENDS REDUCED BORE GLOBE VALVE TO API 602 BOLTED BONNET OSNY RISING STEM PLUG TYPE DISC HANDWHEEL OPERATED ATBODY: ASTM A105N ATTRIM: 13%CR SS + HARDFACED STELLITE SEAT & DISC ATKVC (UK) OR BONNEY FORGE (ITALY) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** ATATBRAND: KVC / BONNEY | 5 |
| Mechanical | Valve | GLOBE VALVE | GLOBE VALVE, P/N: FLANGE TYPE, MFGR: DHV, LOBE;CLASS, 150 RF CS STRAIGHT TYPE, WB ASTM A216 GR WCB;2INCH; ATATVENDOR OFFER: 2INCH ANSI 150 RF FLANGED ENDS GLOBE VALVE BOLTED BONNET OSNY PLUG TYPE DISC RENEWABLE SEAT HANDWHEEL OPERATED NACE MR.01.75 ATBASIC DESIGN: BS 1873, ANSI B16.34 BODY: A216 WCB ATTRIM: TRIM #8 SEAT: STELLITE FACE DISC: 13%CR FACE ATKVC (UK) OR DHV(USA) AT**DEVIATIONS: OFFERED BB INSTEAD ATOF WB** ATATBRAND: KVC / DHV | 1 |
| Mechanical | Valve | GLOBE VALVE | GLOBE VALVE, P/N: FLANGE TYPE, MFGR: NEWCO, 2INCH GLOBE VALVEATGLOBE VALVE STRAIGHT TYPE BOLTED BONNETATASTM A193 GR.B7 / ASTM A194 GR.2H API 600 RFAT125 - 250 ?IN AARH (3.2 - 6.3 ?M RA) SERRATEDATFINISH SPIRAL WOUND SS316L / GRAPHITE CS ASTMATA216 GR.WCB HANDWHEEL OPERATED FLEXIBLEATGRAPHITE PACKING. 150# SWIVEL DISC O.S.& YATRISING STEM API TRIM CN.8 (HALF STELLITEDATSEATING SURFACES)ATVENDOR OFFER:ATSIZE: 2INCHATTYPE: BB OSY GLOBE;PLUG DISCATRATING:150#ATENDS: RFATBODY:A216 WCBATTRIM: API TRIM# 8ATOPERATION: HANDWHEELATBORE: CONVENTIONALATOPTION: N/AATDESIGN: BS 1873ATNEWCO FIG. NUMBER: 21F-CB2ATB CODE: B2020015FHCB*227B****GGATORIGIN: CHINA | 1 |
| Mechanical | Valve | VALVE: GLOBE | GLOVE VALVE, SIZE: 1 IN, USES FOR PROCESS AREA, MFGR: SMITH, CLASS: 800, BODY: A105NLC, 2000 PSI@100DEG F, STEM: CR -13, DISC: CR-13, SEAT: RF USA API 602. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GLOBE | GLOVE VALVE, SIZE: 1/2 IN, UGES FOR PROCESS AREA, MFGR: SMITH, CLASS: 800 LB, BODY: A105NLC, 1975 PSI@100DEG F, STEM: 13CR, DISC: 13CR, SEAT: HF USA API 602. QA: 00. | 3 |
| Mechanical | Valve | VALVE:BUTTERFLY TYPE:WAFER, | IN CLASS:150 LB BODY MATL:A216GR, WCB. OPERATED:GEARBOX VALVE. TYPE: HIGH PERFORMANCE BUTTERFLY. P/N: API609. MFGR: BIS VALVES LTD. METAL SEATED, FIRE-SAFE FLANGE ENDS, WAFER, RF (CONFORMS TO ASME 16.5).PRESSURE RATING: 150 LB, BODY: A216GR, WCB.DISC: A216-WCB, SEAT: STELLITE, STEM: SS630(17-4 PH). OPERATOR: GEARBOX, SIZE: 3 INCH.ORIGIN: TAIWAN. THIS VALVE IS USED AS JB PRODUCED WATER TANK PVRV ISOLATION VALVE AND KEPT AS SURPLUS ITEM FOR FUTURE REFERENCE. QA:00. | 3 |
| Mechanical | Valve | VALVE:PILOT, TYPE ESP-41046 | INLET PRESS. 6000 PSIG, OUTLET PRESS. 225 PSIG, SIZE/CONN 1/4 INC NPT, DESCRIPTION: TYPE 1301F HIGH PRESSURE REGULATOR IS DIRECTED OPERATED REGULATOR, WHICH CAN BE USED WHERE HIGH PRESSURE GAS MUST BE REDUCED FOR USED AS PILOT SUPPLY PRESSURE. MODEL 1301F, INLET PRESSURE: 6000 PSIG, OUTPUT PRESSURE: 225 PSIG. INLET /OUTLET CONNECTION 1/4 INCH FNPT. ONE 1/8 FNPT CONNECTION WITH SCREEN. MFR: FISHER, USA., SERIAL NO:n/a, MODEL NO:N/A | 1 |
| Mechanical | Valve | VALVE:RELIEF TYPE:PRESSURE | INLET SIZE:1/4 INCH INLET CONN:3/8 INCH OUTLET SIZE:NA OUTLET CONN:NA DESIGN RATING:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA PRESSURE RELIEF VALVE; P/N: BP33746, BRAND: MUELLER, COUNTRY OF ORIGIN: USA, MANUFACTURER: MUELLER INDUSTRIES, SIZE: 1/4" X 3/8" ( INCH), PRESSURE: 700 PSI, USE FOR BCE CHILLER, MODEL: 30XAB08026---30 S/L: 2813093252 AT BYGP | 1 |
| Mechanical | Valve | INTERFACE VALVE | INTERFACE VALVE, P/N: FP15E/L2/04/32/V, MFGR: NA, DUMP VALE ATMFGR-BIFOLD ATP/N:FP15E/L2/04/32/V-02 | 1 |
| Mechanical | Valve | CHOKE: TYPE CHOKE VALVE | MANUAL CHOKE VALVE P/N-P35E, MODEL-V85A5B-5A5RT73PV3, SEAL TAFLON,TRIM-TC, INLET:- 5-1/8 INCH, OUTLET:-5-1/8INCH, END USE MANUAL CHOKE VALVE OF X-MASS TREE , , MFGR-MASTER FLO VALVE INC. PREVIOUS PO NO:-517-BO-12433. | 4 |
| Mechanical | Valve | NEEDLE VALVE | NEEDLE VALVE, P/N: 1/2INCH NPTF X 3/4INCH PLAIN CS, MFGR: ANDERSON GREENWOOD, MULTI OUTLET NEEDLE VALVE | 7 |
| Mechanical | Valve | VALVE TYPE:GAS V/V FOR | NO- 6I4617, (CARBURETOR GP), USE FOR LQ GAS GENERATOR, ENGINE MODEL: 3412, SER. NO. CTP 02338, AR. NO. 202 2009, COMP. RATIO 11.4 / 1 POWER 637 HP (475 KW), FULL LOAD RPM: 1800, DISPLACEMENT: L27.0 | 2 |
| Mechanical | Valve | VALVE | NUT DO3 VALVE (NON-OSCLLATING MODELS)P/N: 33568 USED ON GENIE MAN LIFT, MODEL: S65, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 | 2 |
| Mechanical | Valve | VALVE: PINCH | OIL SAMPLING VALVE, P/N: 8C-3446, MFGR: CATERPILLAR, SIZE: 7/16 IN-20 EXT THREAD, USED FOR OIL SAMPLING VALVE WAREHOUSE. QA: 00. | 3 |
| Mechanical | Valve | VALVE: TYPE HYDRAULIC, | OPERATED HYDRAULIC, VALVE 1 IN 1/4 IN PORT HYDRAULIC ACTIVATION DIAPHRAM, P/N 1-DV-M-NO, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 1 |
| Mechanical | Valve | ORBIT VALVE | ORBIT VALVE, P/N: FIG-1430H RF SN-120577286003, 1480PSI, MFGR: CAMERON, ORBIT VALVE FIG-1430H RF SN-120577286003, 1480PSI, SIZE: 2 - 1.5 INCH, | 3 |
| Mechanical | Valve | VALVE:BALL, SIZE 1 INCH | ORDER FORM JBGP- VALVE: BALL, P/N: 1F, MFGR: W-K-M, SIZE:1 INCH, B16.34, MODEL: B138-S8-43-S2, MOP: 3000, NACE: 120096737 7/13, CF8M, Y20B, THREADED END VALVE HAVE NPT INTERNAL PIPE THREAD. FULL PORT, QA: 21. (I&E) | 1 |
| Mechanical | Valve | VALVE: BALL | ORDER FORM JBGP- VALVE: BALL, TYPE: ULTRA CORROSION RESISTATNT FULL PORT ON/OFF VALVE, SUPPLIER P/N: 46495K23 (MFGR P/N: CF8M), SUPPLIER: MCMASTER-CARR (MFGR: SHARPE), SIZE: 1IN, DESIGN RATING: 1000PSI AT 200 DEG F, CONN; FNPT, BODY MATL: 316 SS, TRIM: 316 SS, PORT: FULL, OPERATED: HANDLE, TEMP RATING: 0 TO 450 DEG F, CONFIG: 2-WAY, FLOW COOFICIENT: 47, USE FOR UTILITY WATER & AIR SYSTEM. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GAUGE | ORDER FORM JBGP- VALVE: GAUGE, P/N: 11294869, OLD P/N: 3700K11, MFGR: MCMASTER-CARR, TYPE: COCK, SIZE: 1/2 IN, CONN: 5/8 IN STUFF BOX, VENT DRAIN CONN: 3/8 IN NPTF, INCLUDEDS: I IN MALE X 1/2 IN FEMALE REDUCING BUSHING, P/N: 50785K78, QA: 22 | 2 |
| Mechanical | Valve | VALVE: GAUGE | ORDER FORM JBGP- VALVE: GAUGE, P/N: 11294869, OLD P/N: 3700K11, MFGR: MCMASTER-CARR, TYPE: COCK, SIZE: 1/2 IN, CONN: 5/8 IN STUFF BOX, VENT DRAIN CONN: 3/8 IN NPTF, INCLUDEDS: I IN MALE X 1/2 IN FEMALE REDUCING BUSHING, P/N: 50785K78, QA: 22 | 1 |
| Mechanical | Valve | VALVE: RELIEF | ORDER FORM JBGP- VALVE: RELIEF, PN/ MODEL: SB-50-0A200, MFGR: CONTROL DEVICES INC., TYPE: PRESSURE RELIEF ASME SAFETY, INLET CONNECTION: 1/2 INCH NPT, SET PRESSURE: 200PSIG PSIG. SPRING MATL.: SS, BODY MATL: BRASS, TEMPERATURE RATING: 120 DEG C, CONTROL DEVICES SB50-0A200 PRESSURE RELIEF ASME SAFETY MADE IN USA. QA: 02, 05. | 1 |
| Mechanical | Valve | VALVE: NEEDLE | ORDERED FROM JBGP. VALVE: NEEDLE, P/N: SS-1RS4, MFGR: SWAGELOK, TYPE: BONNET, SIZE: 1/4 IN, DESIGN RATING: 5000 PSIG AT 100 F, ORIFICE DIA: 0.172 IN, BODY MATL: 316 STAINLESS STEEL, TEMP RATING: 5000 PSIG AT 100 F. QA: 21. | 1 |
| Mechanical | Valve | VALVE: DRAIN | Ordering from BYGP_VALVE: DRAIN, P/N: QE-5-316, MFGR: VERSA, TYPE: QUICK EXHAUST VALVE, INLET: 1/2 IN EXHAUST: 3/4 IN, CONNECTION: NPT, TEMPERATURE RATING: -29 TO 93 DEG C, INLET SHUT DOWN VALVE. (OSDV-104), PORT SIZE: 1/2 IN NPT X 3/4 IN NPT , ACCESSORIES TRADE NAME: QE, FLOW: 1/2 IN NPT X 3/4 IN NPT, MATERIAL: 316 STAINLESS STEEL, STYLE: SIDE PORTED, MAZ PSI: PNEUMATIC TO 175 PSI, MAX PSI: PNEUMATIC TO 175 PSI, USE FOR INLET SHUT DOWN VALVE. (SDV-7901) QA: 22. | 1 |
| Mechanical | Valve | VALVE: DRAIN | Ordering from BYGP_VALVE: DRAIN, P/N: QE-5-316, MFGR: VERSA, TYPE: QUICK EXHAUST VALVE, INLET: 1/2 IN EXHAUST: 3/4 IN, CONNECTION: NPT, TEMPERATURE RATING: -29 TO 93 DEG C, INLET SHUT DOWN VALVE. (OSDV-104), PORT SIZE: 1/2 IN NPT X 3/4 IN NPT , ACCESSORIES TRADE NAME: QE, FLOW: 1/2 IN NPT X 3/4 IN NPT, MATERIAL: 316 STAINLESS STEEL, STYLE: SIDE PORTED, MAZ PSI: PNEUMATIC TO 175 PSI, MAX PSI: PNEUMATIC TO 175 PSI, USE FOR INLET SHUT DOWN VALVE. (SDV-7901) QA: 22. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | Ordering from BYGP_VALVE: SOLENOID, NEW P/N: 538-8796, PREVIOUS P/N: 103-0692, MFGR: CATERPILLAR, OTHER MFGR: ASCO, ASCO MODEL: EFHTX8215B08017676, TYPE: VALVE GP, WATT: 30.6 WATTS, FUEL GAS: 50 PSI, USE FOR GAS GENERATOR JBLQ G-703. QA: 00. | 1 |
| Mechanical | Valve | VALVE:NEEDLE, SIZE 1/2 IN | ORIFICE DIA 0.375 IN, BODY MATL 316 SS, OPERATED HANDLE, TEMP RATING MAX 450 DEGREE F AT 3, 435 PSIG /232 DEGREE C AT 236 BAR, INTEGRAL BONNET NEEDLE VALVE, 1.80 CV, REGULATING STEM | 2 |
| Mechanical | Valve | VALVE: SAFETY,TYPE NA,TRIM NA | OUTLET CONNECTION NA,DESIGN RATING NA,BODY MATERIAL NA,OPERATED NA,*OBS*TEMPERATURE RATING NA,TEMP RATING NA,SOFTGOODS NA,SET PRESSURE NA,INLET SIZE NA,INLET CONNECTION NA,PSV, 1 1/2 F 2 JOS-E-15-J PRESSURE SAFETY VALVE MODEL NUMBER: 1 1/2 F 2 JOS-E-15-J BY TYCO VALVES & CONTROL,MFG: ANDERSON GREENWOOD WEB WWW.TYCOVALVES.COM(PREVIOUS PO: 1831 S2BY, ITEM-02, SUPPLIER: MCJUNKIN RED MAN CORPORATION 4732 DARIEN, HOUSTON TX 77028 UNITED STATES E-MAIL: TINA.LAMAS@MCJUNKINREDMAN.COM) | 1 |
| Mechanical | Valve | VALVE: SAFETY,TYPE NA,TRIM NA | OUTLET CONNECTION NA,DESIGN RATING NA,BODY MATERIAL NA,OPERATED NA,*OBS*TEMPERATURE RATING NA,TEMP RATING NA,SOFTGOODS NA,SET PRESSURE NA,INLET SIZE NA,INLET CONNECTION NA,PSV, 1 D 2 JLT-JOS-E-15-J PRESSURE SAFETY VALVE MODEL NUMBER: 1 D 2 JLT-JOS-E-15-J BY TYCO VALVES & CONTROL, WEB WWW.TYCOVALVES.COMMFG: ANDERSON GREENWOOD,WWW.TYCOVALVES.COM(PREVIOUS PO: 1831 S2BY, ITEM-08, SUPPLIER: MCJUNKIN RED MAN CORPORATION 4732 DARIEN, HOUSTON TX 77028 UNITED STATES E-MAIL: TINA.LAMAS@MCJUNKINREDMAN.COM) | 1 |
| Mechanical | Valve | VALVE: SAFETY,TYPE NA,TRIM NA | OUTLET CONNECTION NA,DESIGN RATING NA,BODY MATERIAL NA,OPERATED NA,*OBS*TEMPERATURE RATING NA,TEMP RATING NA,SOFTGOODS NA,SET PRESSURE NA,INLET SIZE NA,INLET CONNECTION NA,PSV, 25312D12/S1 PRESSURE SAFETY VALVE MODEL NUMBER: 25312D12/S1 BY TYCO VALVES & CONTROL, WEB WWW.TYCOVALVES.COM MFG: ANDERSON GREENWOOD,(PREVIOUS PO: 1831 S2BY, ITEM-05, SUPPLIER: MCJUNKIN RED MAN CORPORATION 4732 DARIEN, HOUSTON TX 77028 UNITED STATES E-MAIL: TINA.LAMAS@MCJUNKINREDMAN.COM) | 1 |
| Mechanical | Valve | VALVE: SAFETY,TYPE 26HA10-120 | OUTLET CONNECTION NA,DESIGN RATING NA,BODY MATERIAL NA,TRIM NA,OPERATED NA,*OBS*TEMPERATURE RATING NA,TEMP RATING NA,SOFTGOODS NA,SET PRESSURE 175 PSIG,INLET SIZE 1-1/2 IN,INLET CONNECTION NA,TYPE: 26HA10-120, SET P: 175, SERIAL: CE-43817-5-A10R, CRN: OG2369.5 (This PSV is for Hydro Carbon Vapor Service) | 1 |
| Mechanical | Valve | VALVE: SAFETY,TYPE 26JA12-120 | OUTLET CONNECTION NA,DESIGN RATING NA,ORIFICE NA,BODY MATERIAL NA,TRIM NA,OPERATED NA,*OBS*TEMPERATURE RATING NA,TEMP RATING NA,SOFTGOODS NA,SET PRESSURE 325 PSIG,INLET SIZE 2-1/2 IN 300 CLASS,INLET CONNECTION NA,TYPE: 26JA12-120, , SET P: 325, SIZE: 2.5 J 4, SERIAL: 43837-1-A10, CRN: OG2369.5C QA Code: 17 & 18 | 1 |
| Mechanical | Valve | VALVE: BALL | PART NAME: VALVE, DRAIN , P/N:730000908 , MFG: LIEBHERR, END USE:LIEBHERR CRANE, MODEL: LTM1090-4.1, S/N: 6178008 | 2 |
| Mechanical | Valve | CHECK VALVE | PCV-06F-06F-13- 023-V BIFOLD CHECK VALVE, P/N : PCV-06F-06F-13-023-V MODEL CODE: PNEUMATIC SERVICE CHECK VALVE, INLET CONNECTION: 3/8 INCH FEMALE, OUTLET CONNECTION: 3/8 INCH FEMALE, WORKING PRESSURE: 13 BAR, CRACKING PRESSURE: 0.023 BAR NOMINAL, O-RING MATERIAL: VITON -20 C TO +180 C, CONNECTION TYPE: NPT, EAC MARK: N/A, NACE MR-01-75 COMPLIANT INTERNAL WETTED AND BODY MATERIALS: N/A, OPTION: STAINLESS STEEL, COUNTRY OF ORIGIN : UK, HS CODE : 8481.20.90.90 LEAD TIME : 5-7 WEEKS , SUBJECT TO AVAILABILITY OF CAPACITY AND PARTS PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | CHECK VALVE | PCV-12F-12F-13- 023-V BIFOLD CHECK VALVE, P/N : PCV-12F-12F-13-023-V MODEL CODE: PNEUMATIC SERVICE CHECK VALVE, INLET CONNECTION: 3/4 INCH FEMALE, OUTLET CONNECTION: 3/4 INCH FEMALE, WORKING PRESSURE: 13 BAR, CRACKING PRESSURE: 0.023 BAR NOMINAL, O-RING MATERIAL: VITON -20 C TO +180 C, CONNECTION TYPE: NPT, EAC MARK: N/A, NACE MR-01-75 COMPLIANT INTERNAL WETTED AND BODY MATERIALS: N/A, OPTION: STAINLESS STEEL, COUNTRY OF ORIGIN : UK HS CODE : 8481.20.90.90 LEAD TIME : 5-7 WEEKS , SUBJECT TO AVAILABILITY OF CAPACITY AND PARTS PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | VALVE: CHECK | PIPE: CHECK, P/N: 5X781, MFGR: GRAINGER, 3/8 IN CHECK GRAINGER CDI CONTROL DEVICES, VALVE, CHECK, 3/8 IN, MODEL: 5X781, ITEM : CHECK VALVE TYPE: AIR, SIZE: 3/8 IN, MAX. PRESSURE: 250 PSI, CONN: 3/8 IN, PORT: 3/8 IN, BODY MATL: CAST BRASS, FLOW RANGE FREE AIR (CFM): 0 TO 22, MAX. TEMP. (F): 450 MOUNTING: VERTICAL OR HORIZONTAL, TAP SIZE: 1/8 IN FOR PRESSURE SWITCH, CONNECTION LENGTH (IN) : 2-3/16, DISC : POSITIVE SEATING FLOURO, MAXIMUM AIR FLOW, USE IN INSTRUMENT AIR COMPRESSOR K-601 DRYER UNIT REFERENCE MPR22139748. QA: 01, 07. | 2 |
| Mechanical | Valve | PNEUMATIC VALVE: DIRECTIONAL | PNEUMATIC VALVE: DIRECTIONAL, P/N(MODEL): BSG-3328-316-H2-LB-ST-XX-D024, MFGR: VERSA, B-SERIES VALVE, SPRING RETURN, SOLENOID-PILOT, MAT: SS316, 3/2 (THREE-WAY) SOLENOID VALVES, TYPE: INPILOT (SIDE PORTED-INTERNAL PILOT), PIPE SIZE: 1/4 IN, ELECT RATING: 24 VDC, WATT: LOW WATT (1.8W), THREADED PILOT EXHAUST ADAPTER 1/8 IN NPT, STAINLESS SOLENOID HOUSING, CONFIG: 3/2 NORMALLY CLOSE, 1/2IN CONDUIT CONNECTION, OPERATING PRESSURE: 18-120 PSIG, TEMP.: 1550 F, ENCLOSURE: UL LISTED, & CCSA APPROVED, CLASS I, DIV. 2 (A & B), CLASS I, DIV. 1 (C & D), CLASS II, DIV. 1 (E, F & G), NEMA 7&9, MANUFACTURE: VERSA, USED FOR JB-6 WV, SSV, SCSSV & WHCP, QA/QC: 01 & 17. | 2 |
| Mechanical | Valve | VALVE:BALL TYPE:HANDLE | PORT:FULL OPERATED:HANDLE VALVE, PART NO- 1124036, (COOLANT HOSE/LINES), USE FOR LQ GAS GENERATOR, ENGINE MODEL: 3412, SER. NO. CTP 02338, AR. NO. 202 2009, COMP. RATIO 11.4 / 1 POWER 637 HP (475 KW), FULL LOAD RPM: 1800, DISPLACEMENT: L27.0 | 3 |
| Mechanical | Valve | POSITIONER: VALVE | POSITIONER: VALVE, P/N: 9479SBY2B2M0600, MFGR: WESTLOCK, TYPE: SPDT NEMA7 LS, SUPPLY RATING: 120 V 3 A AC, I/P RANGE: 24 V DC, ADTL DESCRIPTION: VALVE ROTARY POSITION MONITOR WITH HERMATICALLY SEALED PROXIMITY SWITCHES SIZE/CONN: 3/4 IN FNPT X 3/4 IN FNPT, MATERIAL: ALUMINUM, NEMA 4, 4X, 7, 9; CLASS-1, GR-C, D; CLASS-II, GR-E, F, G, DIV.-1, 2, MANUFACTURE: WESTLOCK, USED FOR SHUTDOWN VALVE EQUIPMENT TAG: SDV-7900. QA: 00. | 1 |
| Mechanical | Valve | POSITIONER: VALVE | POSITIONER: VALVE, P/N: DVC6200S, S/N: IA74584, MFGR: FISHER, TYPE: CURRENT TO AIR, SUPPLY RATING: 0-100 PSI, 4-20MA, ADDI DESC: DIGITAL VALVE CONTROLLER, POSITIONER TYPE: DVC6200, ANALOG INPUT SIGNAL: 4 TO 20 MA DC, REVERSE POLARITY PROTECTION: NO DAMAGE OCCURS FROM REVERSAL OF LOOP CURRENT (4-20 MA), HART COM FORTABLE, ELECTRICAL CONNECTION: IN FNPT, EXPLOSION PROOF, INTRINSICALLY SAFE, CL I, DIV 1, GP A, B, C, D. CL II, DIV 1, 2, GP E, F, G. TYPE: NEMA 4X, T5, MAX SUPPLY PRESSURE: 100 PSI, MAX OUTPUT PRESSUR: 90 PSI WITH 2 GAUGES AND MOUNTING 67AFR, OPERATING TEMP: -40 DEG F TO 175 DEG F, MOUNTING: DIRECT ACTUATOR MOUNTING, QA/QC: 17 & 18. | 1 |
| Mechanical | Valve | POSITIONER: VALVE | POSITIONER: VALVE, P/N: SVI II AP, MFGR: MASONEILAN, TYPE: DIGITAL VALVE POSITIONER. QA: 22. | 3 |
| Mechanical | Valve | POSITIONER:VALVE | POSITIONER: VALVE, P/N: SVI2--21113111, MFGR: DRESSER INC, S/N: C213032827, OTHER MFGR: MASONEILAN, MODEL: SVI-II AP, TYPE: 4X-IP66. QA: 13., QACode:22:Manu/Vendor Preservation Proc. | 4 |
| Mechanical | Valve | VALVE: RELIEF | PRESSURE RELIEF DEVICE WITH ALARM CONTACT, BRAND: ORTO, MODEL: 0510 TCB, P/N: ER35, MFGR: GE PROLEC TRANSFORMERS INC, TYPE: PRESSURE, USED AT GE OIL FILLED TRANSFORMER (S3958). QA: 22. | 1 |
| Mechanical | Valve | VALVE: POPPET,SIZE 1 IN | PRESSURE RELIEF VALVE, 289 SERIES RELIEF VALVE, TYPE: 289H-43 10-08, FISHER | 2 |
| Mechanical | Valve | VALVE: SAFETY | PRESSURE SAFETY VALVE, MODEL NUMBER: 4L6 JLT-JOS-E-OR-35-J, SET PRESSURE: 325 PSIG, 1518 GPM WATER @ 70 DEG F, BACK PRESSURE: 285 PSIG, OVER PRESSURE: 10%, CONNECTION: 4 IN ANSI 300#RF INLET X 6 IN ANSI 150#RF OUTLET, ORIFICE SIZE: L ( 2.853 SQ. IN.), BODY AND BONNET: ASME SA216 WCB/WCC CARBON STEEL, TRIM: 316 SS(METAL SEAT), SEAT RINGS: 316 SS, GUIDE AND RINGS: ASTM A297 GR. HE SST, SPRING: CHROME STEEL, SERVICE: LIQUID/GAS, PRESSURE RANGE: 15 PSIG TO 740 PSIG, OPERATING TEMPERATURE : -20 DEG F TO +650 DEG F, SOFTGOODS VITON O-RING, PAINT: FACTORY STANDARD, MANUFACTURE: CROSBY, TAG NUMBER: PSV-206, USE FOR PROPANE COMPRESSOR OIL SEPERATOR, QA/QC CODE: 2, 5, 8 & 11 | 1 |
| Mechanical | Valve | VALVE: SAFETY | PRESSURE SAFETY VALVE, TYPE: PSV, P/N: 1.5G3JOS-EOR35J, MFGR: ANDERSON GREENWOOD, SET PRESSURE: 325PSI, RATING: 3348SCFM, THIS PSV (PSV-351) USE IN JBGP NEW PROPANE ECONOMIZER. | 1 |
| Mechanical | Valve | VALVE | PUMP- INJECTOR(DEUTZ PART NO. 417-8125), P/N: 49929 USED ON GENIE MAN LIFT, MODEL: S65, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 | 1 |
| Mechanical | Valve | QUICK EXHAUST VALVE | QE-3-316 VERSA QUICK EXHAUST VALVE, SS316, 1/4IN NPT(MI#1397), P/N : QE-3-316 LEAD TIME : 7-9 WEEKS PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | VALVE:GATE TYPE:NA SIZE:NA | RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 3 INCH, 150 CLASS, 285 PSIG, MFGR: NA, PO- 1257978, LINE ITEM- NA, FE CONST PROJECT SURP | 2 |
| Mechanical | Valve | VALVE:BALL TYPE:THRD SIZE:1IN | RATING:FE CONS CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA BALL VALVE TYPE:THRD SIZE:1 INCH X 2000 WOG,MODEL:A PS 100 PSIG,TS 450 T FIGT180SSEZ,LTD 2000 PSIG,MFGR:VELAN TAIWAN,PO-NO,FE CONST SURP. | 1 |
| Mechanical | Valve | VALVE:GATE TYPE:NA SIZE:NA | RATING:NA CONN:NA BODY MATL:NA TRIM:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA STYLE:NA STEM DESIGN:NA GATE VALVE, 1 INCH, CLASS 2500, SW X NPT, 6170 PSI 800 F 3430 PSI, A105 N, STEM 410, DISC, 420, FIG NO 1GTW-F2SSI-A8, MFGR: NA, PO- NA, LINE ITEM- NA, FE CONST PROJECT SURP | 7 |
| Mechanical | Valve | VALVE:BALL TYPE:TRUNNION | RATING:NA CONN:NA BODY MATL:NA TRIM:NA PORT:NA OPERATED:NA TEMP RATING:NA SOFTGOODS:NA CONFIG:NA GROVE BALL VALVE, TYPE: TRUNNION, P/N: 14X12_RJ_B5_600_103_A, MFGR: CAMERON, VALVE SIZE: 14 IN (350MM), NOMINAL BORE SIZE: 12 IN (300 MM), PRESSURE CLASS: ASME 600 (100 PN), END CONNECTION: FLANGED RING JOINT (RJ), MODEL: B-5 TRIM: STAINLESS-STEEL TRIM/D0103, METHOD OF OPERATION: ACTUATOR, PAINT/COATING SHOP PRIMER, SPECIAL REQUIREMENT 10 INCH BORE REQUIRED. PO NUMBER:1333713, LINE ITEM#4 | 1 |
| Mechanical | Valve | VALVE:RELIEF, OPERATED GAS | RUPTURE DISK/BURST DISK FOR TANK OSECO GR RUPTURE DISCS. TYPE,GRAPHITE,4'',CLASS 150 RF FLANGES,BURST PRESSUR RATING-20 PSIG@72 DEG F FOR BOTH DIRECTION. MANUF:OSECO,USA HATCH,MANF: ENARDO,CANADA., SERIAL NO:n/a, MODEL NO:GRAPHITE, 4 | 3 |
| Mechanical | Valve | RELIEF VALVE | S25N-10B BIS RELIEF VALVE, SS316, 1/4IN NPT (MI: 3958), P/N: S25N-10B LEAD TIME : 15-17 WEEKS PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | RELIEF VALVE | S37N-7B BIS RELIEF VALVE, SS316, 3/8IN NPT (MI: 5222), P/N : S37N-7B LEAD TIME : 1-2 WEEKS ( SUBJECT TO PRIOR SALES ) PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | RELIEF VALVE | S50N-7B BIS RELIEF VALVE, SS316, 1/2IN NPT (MI: 3986), P/N : S50N-7B LEAD TIME : 11-12 WEEKS PURPOSE OF USE: TURBO EXPANDER COMMISSIONING & CAPITAL SPARE | 2 |
| Mechanical | Valve | VALVE: CONTROL,TYPE 667 | SET PRESSURE 6~30 PSI,CONTROL VALVE BODY, SERIAL NO: 0017881737G, TYPE: D, SIZE: 1 INCH, PORT SIZE: 3/4 INCH, RATING: CL 150/290 PSI CWP, PLUG: SST/SF, STEM: SST, BODY: STL >> ACTUATOR, SERIAL NO: 18041909G, TYPE: 667, SIZE: 30, BENCH SET: 14~30, TRAVEL: 3/4, PRESSURE UNIT: PSI, OPERATING RANGE: 6~30, MANUFACTURE: FISHER CONTROL INC. | 1 |
| Mechanical | Valve | VALVE:BALL PART NO. | SIZE:2", CLASS 300.BALL VALVE USE FOR PROPANE TRANSFER PUMP | 4 |
| Mechanical | Valve | VALVE: CHECK,SIZE NA,STYLE NA | SOFTGOODS NA,CONFIGURATION NA,DESIGN RATING NA,CONNECTION NA,BODY MATERIAL NA,PORT NA,TYPE NA,MIN. PRESSURE CHECK VALVE | 1 |
| Mechanical | Valve | VALVE: TYPE 3 VALVE MANIFOLD | SOFTGOODS NA,STYLE NA,CONFIGURATION 3-WAY,SIZE 1/2 IN,DESIGN RATING 6000 PSI,CONNECTION NPT,BODY MATERIAL NA,OPERATED NA,3 VALVE MANIFOLD;METAL: 316 SS, T.PR: 6000 PSI, H.T.CODE: H-1256/07, DESCRIPTION: 3VM/F, TYPE: 1/2 IN NPT(F)X(F) | 2 |
| Mechanical | Valve | VALVE: BALL, SIZE 1 IN | TRIM TRU UNION, VALVE, BALL CHECK 1 IN SCH 80 PVC TRUE UNION, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 1 |
| Mechanical | Valve | VALVE: CONTROL, TRIM NA | TYPE (PV/PY-31305A) CONTROL VALVE, INLET SIZE 1 IN 150, INLET CONNECTION NA, OUTLET SIZE NA, OUTLET CONNECTION NA, DESIGN RATING NA, BODY MATERIAL (PV/PY-31305A) 1 IN 150, TEMPERATURE RATING NA, SOFTGOODS NA, (PV/PY-31305A) 1'' 150# FISHER CONTROL VALVE , P/N 667-ET, MFG : FISHER ( NOTE: SUPPLIER : ENERFLEX SYSTEMS LTD.) | 1 |
| Mechanical | Valve | VALVE: | VALVE ASSY, BLEED, P/N: 13852GT, MFGR: GENIE, END USE: FOR GENIE MANLIFT,PO NO: 1311740, MODEL: Z60/34 | 4 |
| Mechanical | Valve | VALVE: CONTROL | VALVE CONTROL MEDIA FILTER (COMPLETE ASSY), F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 1 |
| Mechanical | Valve | VALVE | VALVE COUNTERBALANCE, 1500 PSI, P/N: 77410GT, MFGR: GENIE, MODEL: Z 45/25, SERIAL NUMBER: 16688, EQUIPMENT NAME: MANLIFT, ENGINE: DEUTZ, CAPACITY: 30KW, MODEL: F3L 1011, ENGINE SERIAL NUMBER: 00514883, RPM: 2800, EQUIPMENT TAG: BY-MLG-602. | 2 |
| Mechanical | Valve | VALVE | VALVE- COUNTERBALANCE, 3000 PSI(206.8 BAR), P/N: 33428 USED ON GENIE MAN LIFT, MODEL: S65 & SX-180, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 & BY-MLG-608 STORAGE : TEMPERATURE CONTROLLED ROOM | 2 |
| Mechanical | Valve | VALVE: | VALVE FOOT CHEMICAL PUMP SUCTION, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 3 |
| Mechanical | Valve | GATE: VALVE,TYPE GATE | VALVE PART, GATE MANUAL, 5-1/8 , 5000 PSI MSP, MODEL VG-300, SLAB, LOW ALLOY NACE, CARBIDE COATING. P/N: H130935-9, MFGR: ABB VETCO GRAY | 2 |
| Mechanical | Valve | VALVE: TYPE N/A | VALVE PR .P/N -GY207801. END USE MANLIFTER ,BRAND NAME -GENIE, MODEL S-65 & Z-60/34. VENDOR- HOUSTON- HI LIFT DIVISION ,H & E EQUIPMENT SERVICES, INC HOUSTON,TX.77060,281-081-4600. | 1 |
| Mechanical | Valve | VALVE: TYPE N/A | VALVE SOLENOID .P/N -52207 . END USE MANLIFTER ,BRAND NAME -GENIE, MODEL S-65 & Z-60/34. VENDOR- HOUSTON- HI LIFT DIVISION ,H & E EQUIPMENT SERVICES, INC HOUSTON,TX.77060,281-081-4600. | 1 |
| Mechanical | Valve | VALVE: TYPE N/A | VALVE SOLENOID .P/N-061407. . END USE MANLIFTER ,BRAND NAME -GENIE, MODEL S-65 & Z-60/34. VENDOR- HOUSTON- HI LIFT DIVISION ,H & E EQUIPMENT SERVICES, INC HOUSTON,TX.77060,281-081-4600. | 1 |
| Mechanical | Valve | VALVE | VALVE, COUNTERBALANCE, 3500, P/N: 54065GT, MFGR: GENIE, MODEL: Z 45/25 & SX-180, SERIAL NUMBER: 16688, EQUIPMENT NAME: MANLIFT, ENGINE: DEUTZ, CAPACITY: 30KW, MODEL: F3L 1011, ENGINE SERIAL NUMBER: 00514883, RPM: 2800, EQUIPMENT TAG: BY-MLG-602 & BY-MLG-608. | 3 |
| Mechanical | Valve | VALVE | VALVE, P/N 4L-3411, MFGR: CATERPILLAR, USED FOR MCS GAS GENERATOR G-3516, ENGINE S/N: WPS00169, ARR-273-3065, POWER: 783 KW/1050 HP, RPM-1800 | 1 |
| Mechanical | Valve | VALVE: | VALVE, P/N: 100-6889, MFGR: CATERPILLAR, MODEL: 3408, SERIAL NUMBER: 6NB05080, ARRANGEMENT NO.: 2147182 AND MODEL: 3412 SERIAL NUMBER: CRF02300 ARRANGEMENT NO.: 2261169, USE FOR ALL PAD NEED SAME BRIDGE. | 61 |
| Mechanical | Valve | VALVE | VALVE, P/N: 146238, MFGR: KOLDTECH, TYPE: LIQUID SERVICE, SIZE: 3/8 IN, CONN: FLARE, USE FOR WALK-IN FREEZER, MODEL: ZF11K4E-TFD-551, SL: 04B17773G. QA: 13. | 1 |
| Mechanical | Valve | VALVE | VALVE, P/N: 3EC-66-54150, SERIAL NUMBER: 133001, EQUIPMENT NAME : FORKLIFT, MFGR: KOMATSU, FORKLIFT MODEL: FD50AY-10, ENGINE MODEL: S4D95LE-3, S/N: 131548, TAG NUMBER OF FORKLIFT: MB-FL 0812-04 | 4 |
| Mechanical | Valve | VALVE: | VALVE, P/N: 62258GT, MFGR: GENIE, NEEDLE* HQ, PLATFORM LEVEL, USE FOR GENIE MANLIFT, MODEL-Z60, SERIAL NO:Z6012-10256, MODEL YEAR:2012, RATED CAPACITY-227KG, MANUFACTURER: TEREX SOUTH DAKOTA INC, EQUIPMENT TAG: BY-MLG-606 | 4 |
| Mechanical | Valve | VALVE | VALVE, P/N: 91E5400300, PREVIOUS P/N: 91E5400100, MFGR: CATERPILLAR, TYPE: STEERING, USED FOR STEERING SYSTEM DRIVING CONTROL CHASIS OF FORK LIFT MODEL DP30N TAG BY-FCA-301. QA: 00. | 1 |
| Mechanical | Valve | VALVE: TYPE SHUTDOWN VALVE, | VALVE, P/N: SDV-35109, TYPE: SHUTDOWN VALVE, SIZE: 3 IN 150 # RF, TRIM NA, DESIGN RATING NA, CONNECTION NA, BODY MATERIAL NA, OPERATED NA, TEMPERATURE RATING NA, SOFTGOODS NA, STYLE NA, CONFIGURATION NA, (SDV-35109) 3 IN 150# RF SHUTDOWN VALVE (VALVE ONLY ACTUATOR NOT INCLUDED). QA: 00 | 1 |
| Mechanical | Valve | VALVE: SIZE NA, TRIM NA | VALVE, P/N: T14121T0022, MFGR: FISHER, SIZE NA, TRIM NA ,TYPE: VALVE CART, ASSY, DESIGN RATING NA, CONNECTION NA, BODY MATERIAL NA, OPERATED NA, TEMPERATURE RATING NA, SOFTGOODS NA, STYLE NA, CONFIGURATION NA, VALVE CART, ASSY ALUM/VITON/VITON, QA: 00 | 1 |
| Mechanical | Valve | VALVE: SIZE NA, TRIM NA | VALVE, P/N: T14121T0022, MFGR: FISHER, SIZE NA, TRIM NA ,TYPE: VALVE CART, ASSY, DESIGN RATING NA, CONNECTION NA, BODY MATERIAL NA, OPERATED NA, TEMPERATURE RATING NA, SOFTGOODS NA, STYLE NA, CONFIGURATION NA, VALVE CART, ASSY ALUM/VITON/VITON, QA: 00 | 1 |
| Mechanical | Valve | VALVE: NO MODIFIER | VALVE, P/N: V268-0101-01-177, MFGR: ASCO, TYPE: SOLENOID, ADDI DESC: SOLENOID EF8320G202 24VDC 3/2, USE FOR WELLHEAD ICSS. QA: 13. | 3 |
| Mechanical | Valve | VALVE | VALVE, P/N:-02250176-589, MFGR: SULLAIR, PORTABLE AIR COMPRESSOR, MODEL-375H DPQ-CA, EVACUATOR 375-4, BRAND-SULLAIR, CAPACITY-375 CFM, RATED PRESSURE-150 PSIG, PRESSURE RANGE-(80-150) PSIG, ENGINE-CATERPILLAR-3054C DIESEL ENGINE COMPRESSOR, TAG NO: BY-CSP-802 & BY-CSP-803 | 2 |
| Mechanical | Valve | VALVE | VALVE, P/N-4W-5224,MFGR: CATERPILLAR, USED FOR MCS GAS GENERATOR G-3516, ENGINE S/N: WPS00169, ARR-273-3065, POWER: 783 KW/1050 HP, RPM-1800 | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE, PROPORTIONAL HR, TURNTABLE ROTATE LEFT/RIGHT, P/N: 102527GT, MFGR: GENIE, COIL VOLT: 10 DC, COMATROL DESC: SOLENOID, PROP. FLOW CONTROL, 924503-001, RESISTANCE: 3.7 OHM, AMP: 1.8A, COMATROL P/N: 139905, ADD DESC :ELECT. RATING: 10 TO 12VDC, BODY MATL: 316SS, CONFIG: 1-WAY MANIFOLD, CONN: MNPT X MANIFOLD, OPERATION: NC, COIL: CONTINUOUS DUTY CLASS H, COMMON USE FOR MANLIFT. QA: 22. | 4 |
| Mechanical | Valve | VALVE, PSV, PRESSURE RELIEF V | VALVE, PSV, PRESSURE RELIEF VALVE, MODEL: 26GA13-120, MFR: FARRIS ENGINEERING, USA , INLET SIZE: 1.5 INCH, CLASS 600#, FACING: RF, OUTLET SIZE: 2.5 INCH, CLASS 150#, FACING: RF,OPERATING PRESSURE: 1268 PSIG , SET PRESSURE: 1415 PSIG, | 1 |
| Mechanical | Valve | VALVE, PSV, PRESSURE RELIEF V | VALVE, PSV, PRESSURE RELIEF VALVE, MODEL: 26JC13-120, MFR: FARRIS ENGINEERING, USA. INLET SIZE: 2.5 INCH CLASS 600#, OUTLET SIZE: 4 INCH, CLASS 150# , PROCESS FLUID: HYDROCARBON VAPOUR , OPERATING PRESSURE: 1295 PSIG , SET PRESSURE: 1415. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE, SOLENOID NORMALLY OPEN 115 VAC, F/AQUON WATER TREATMENT UNIT, MFG. SERVAL ENVIRONMENT | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE, SOLENOID, HONEYWELL LUCIFER 7000 SERIES, P/N U133X5196-492210C2, 24 V DC, MFG. HONEYWELL | 4 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE, SOLENOID, HONEYWELL LUCIFER 7000 SERIES, P/N U133X5196-492210C2, 24 V DC, MFG. HONEYWELL | 1 |
| Mechanical | Valve | VALVE | VALVE, TYPE: JOULE-THOMSON VALVE, P/N: M525-3VS-5, MFGR: MOKVELD, USED AT LTS AS JT VALVE, TAG: PDV01301 & PDV02301. VALVE: TYPE: RZD-RCX, SIZE: 18 INCH, CLASS: 600, BODY MATT: ASTM A352 GR. LCC, TEMPERATURE: 176 DEG F (AT MAX 1500 PSIG), PRESSURE: 1500 PSIG (AT -50 TO 200 DEG F), CV: 620/LINEAR TRIM, SERIAL NO.: 55054-004. ACTUATOR: TYPE: M525-3VS-5, SERIAL NO: 55054-004, ACTION: FAIL CLOSE, SUPPLY PRESSURE: MIN 4.0 BARG (58 PSIG), MAX 10.0 BARG (145 PSIG), SHUT-OFF PRESSURE: 103.4 BAR (1500 PSIG), LIMIT STOP: 25% VALVE STROKE. QA: 00 | 2 |
| Mechanical | Valve | VALVE | VALVE,P/N:20HM52,MFGR:SIGMA,SIZE:1/4 IN X 3/8 IN FNPT,CONN:FNPT,BODY MATL:316 SS,OPERATED:PNEUMATIC/HYDRAULIC,PRESSURE RATING: 0 - 6000 PSI,CONFIG:3-WAY, NORMALLY CLOSE,EXTRA DESC:HYDRAULIC INTERFACE VALVE WITH MANUAL OVERRIDE, 0.218 IN ORIFICE,PILOT OPERATING PRESSURE 0 -150 PSI (MAX) (USED FOR WELLHEAD CONTROL PANEL). | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, MODEL: PTMVIS-4, MFGR: ANDERSON GREENWOOD, 2 VALVE MANIFOLD 1/2 IN FNPT X 1/2 IN FNPT SS DELRIN SEAT, USED IN SALES GAS SKID A-200, THE PT TWO-VALVE CALIBRATION MANIFOLDS ARE USED ON STATIC PRESSURE TRANSMITTERS, SWITCHES OR GAUGES. THE SHUTOFF VALVE, TEE, CALIBRATION VALVE, AND ALL IMMEDIATE TUBING/FITTINGS ARE AVAILABLE IN ONE SIMPLE MANIFOLD. THE PT MANIFOLDS ARE AVAILABLE WITH EITHER METAL SEATS OR REPLACEABLE SOFT SEAT INSERTS, 2 VALVE MANIFOLD (1-BLOCK, 1-VENT/BEST), TEFLON PACKING, 316 STAINLESS STEEL BODY AND SEAT. QA: 00. | 2 |
| Mechanical | Valve | VALVE: BALL, TYPE RTJ | VALVE: BALL, P/N: 2 IN X 900 CLASS, MFGR: CAMERON, TYPE: TRUNNION, 2 IN (50 MM) X 2 IN (50 MM), FLANGED RING JOINT, WKM, 370D6, ANSI 900 (150 PN), 2220 PSI (153 BAR) MOP, 1997 PSI (137 BAR) MOP AT MAX TEMP, TRIM 24-YRF-23, CARBON STEEL BODY, CF8M/316 SS BALL, 316 SS STEM, CF8M/316 SS SEAT, NYLON 6 SEAT SEAL, HNBR SEALS, WRENCH WITH LOCK DEVICE LESS LOCK, API 607, API 6D, API 598, -20 F (- 29 C) - +250 F (+121 C), LONG PATTERN PART NUMBER : 2365466-4511322 PO-27167, ITEM-4, SUPPLIER: CAMERON SINGAPORE PTE LTD. QA: 00. | 2 |
| Mechanical | Valve | VALVE: BALL, CONNECTION NA | VALVE: BALL, P/N:(3/4IN -VB-41), MFGR: GROVE, CONNECTION NA ,TYPE: 3/4 IN -VB-41, SIZE: 3/4 IN SW CLASS 800 LEVER, BODY MATERIAL NA, TRIM NA, PORT NA, OPERATED: LVEVER OPERATED, TEMPERATURE RATING NA, SOFTGOODS NA, CONFIGURATION NA, (3/4IN -VB-41) 3/4IN SW CLASS 800 LEVER OPERATED BALL VALVE. QA: 00 | 1 |
| Mechanical | Valve | VALVE: BALL, BRONZE BODY | VALVE: BALL, DESIGN RATING 600WOG, CONN THD, BODY MATL BRZ, TRIM BRZ BALL, PORT FULL, OPERATED HANDLE, TEMP RATING 600LB, SOFTGOODS PTFE, CONFIG 2-WAY, BALL VALVE, CL.600 WOG, THD, P/N: 2 IN X 600 WOG, KITZ VALVE & ACTUATION SINGAPORE, MATERIAL: BRZ, TYPE: BRONZE BODY, BRONZE BODY B61, FE CONSTRUCTION., QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA, P/N: 2 INCH BALL VALVE THRD CLASS 600 | 4 |
| Mechanical | Valve | VALVE: BALL, MATL: CS | VALVE: BALL, MATL: CS, DESIGN RATING 150LB, CONN FLG, BODY MATL CS, TRIM 316 SS TRIM, PORT FULL, OPERATED HAND LEVER, TEMP RATING 150 LB, SOFTGOODS PTFE TRIM, CONFIG 2-WAY, BALL VALVE; CLASS.150; P/N: 3 IN X 150; MATERIAL: CS A216WCBSS316; TYPE: CS BODY; FE CONSTRUCTION; PO NO: 1263341-4, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 3 |
| Mechanical | Valve | VALVE: BALL, MATL: CS | VALVE: BALL, MATL: CS, DESIGN RATING 150LB, CONN FLG, BODY MATL CS, TRIM 316 SS TRIM, PORT FULL, OPERATED HAND LEVER, TEMP RATING 150 LB, SOFTGOODS PTFE TRIM, CONFIG 2-WAY, BALL VALVE; CLASS.150; P/N: 4 IN X 150; MATERIAL: CS A216WCBSS316; TYPE: CS BODY; FE CONSTRUCTION; PO NO: 1263341-5, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 5 |
| Mechanical | Valve | VALVE: BALL, MATL: CS | VALVE: BALL, MATL: CS, DESIGN RATING 800LB, CONN THD, BODY MATL 316 SS, TRIM 316 SS TRIM, PORT REDUCED, OPERATED WRENCH, TEMP RATING -20 TO 750 DEG, SOFTGOODS TEFLON, CONFIG 2-WAY, BALL VALVE; CLASS.800; P/N: 1/2 IN X 800; MATERIAL: 316 SS, REGULAR PORT, ASTM A105; TYPE: 316SS; FE CONSTRUCTION; PO NO: 1281700-18, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 2 |
| Mechanical | Valve | PRESSURE VACUUM SW | VALVE: BALL, P/N OR MODEL NO: MV608-4, MFGR: PARKER, MV608 MINI VALVE-COMPACT HANDLE-MALE FEMALE PIPE ENDS, LOW PRESSURE BALL VALVE, PTF, MALE X FEMALE, 1/4, HAND OPERATED, 0-200 F, BRASS CHROME PLATED, NON PADLOCK DEVICE. PURPOSE OF USE: REQUIRED FOR PROCESS CONTROL UNDER BC SCOPE AT BIBIYANA GAS PLANT | 1 |
| Mechanical | Valve | VALVE: BALL, TYPE RTJ | VALVE: BALL, P/N: 12 IN X 900 CLASS, MFGR: CAMERON, TYPE: TRUNNION, SIZE: 12 IN (300 MM) X 12 IN (300 MM), CLASS: 900 LB, FLANGED RING JOINT, WKM, 370D4, ANSI 900 (150 PN), 2220 PSI (153 BAR) MOP, 1997 PSI (137 BAR) MOP AT MAX TEMP, TRIM 24-YRF-23, CARBON STEEL BODY, CF8M BALL, TYPE 630 SS/1 MIL ENP STEM, CF8M/316 SS SEAT, NYLON 6 SEAT SEAL, HNBR SEALS, WORM GEAR OPERATOR, API 607, API 6D, -20 F (-29 C) - +250 F (+121 C), LONG PATTERN PART NUMBER : 2191475-13-02 PO-27167, ITEM-1, SUPPLIER: CAMERON SINGAPORE PTE LTD. QA: 00. | 2 |
| Mechanical | Valve | VALVE: BALL, TRIM NA | VALVE: BALL, P/N: (1IN--VB-42), MFGR: GROVE, TRIM NA ,SIZE 1 IN CLASS 800, PORT NA, DESIGN RATING NA, CONNECTION: 1IN NPT, BODY MATERIAL NA, TYPE: (1IN- VB-42), OPERATED: LEVER OPERATED, TEMPERATURE RATING NA, SOFTGOODS NA, CONFIGURATION NA, (1IN -VB-42) 1IN NPT CLASS 800 LEVER OPERATED BA. QA: 00 | 1 |
| Mechanical | Valve | VALVE: BALL, CONNECTION NA | VALVE: BALL, P/N: (1IN--VB-60), MFGR: GROVE, CONNECTION NA ,SIZE 1 IN 150 #RF, TRIM NA, DESIGN RATING NA, BODY MATERIAL NA, PORT NA, TYPE: (1IN- VB-60), OPERATED: LEVER OPERATED, TEMPERATURE RATING NA, SOFTGOODS NA, CONFIGURATION VB-60, (1IN -VB-60) 1IN 150# RF LEVER OPERATED BALL VALVE. QA: 00 | 2 |
| Mechanical | Valve | VALVE: BALL, TYPE RTJ | VALVE: BALL, P/N: 1 1/2 IN X 1500 CLASS, MFGR: FORUM ENERGY TECHNOLOGIES, SIZE: 1 1/2 IN, CLASS: 1500 LB, 1 IN 1500 CLASS RTJ FB LF2/SS/DEVLON PBV C6415 PBV BALL VALVE FB (DEVIATION - OFFER FULL BORE INSTEAD OF REDUCE BORE) FLOATING BALL (DEVIATION - OFFER FLOATING BALL INSTEAD OF TRUNNION MOUNTED) 2 PC BODY, NACE, FIRE SAFE BODY : LF2 (DEVIATION - OFFER LF2 INSTEAD OF WCB) BALL: CF8M (DEVIATION - OFFER CF8M INSTEAD OF F316) STEM : SS316 SEATS : DEVLON (DEVIATION - OFFER DEVLON INSTEAD OF RPTFE) SEALS : GRAPHITE LEVER OPERATED C/W LOCKING DEVICE FIG NO.: C-6415-33-2536-DL-NL-I SIZE : 1 IN X 1500RTJ (OFFER CLASS 1500 INSTEAD OF CLASS 900 - SAME DIMENSIONS) REF PO-28313, ITEM-1, SUPPLIER: MRC MSD ENGINEERING PTE LTD. QA: 00. | 2 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: 100, MFGR: 2. AUDCO INDIA LTD, ISO: 14313, CL: 600, CAT: TRA633G, SIZE: DN 150X100 (6INCHX4INCH), S.NO. 0001, BODY: LCC, SEAT: NYLON, BALL: F316, STEM: F316, DATE: 06/13, TAG No. L25JE3CFB, PO.SL.NO.: 14740-P, MOP: 103.4 BAR (1500 PSI) AT -460C (-500F), MOP: 101.8 BAR (1476 PSI) AT1210C (249.8 DEG F) | 7 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: 120577849-002, MFGR: WKM DRESSER, SIZE: 2 X 2, CLASS: 900, S/N: 120577849-002, MODEL: 370D6, BM: 2365466-4111322, 24YRF23, API: 6D/QSL1, MOP: 2220 PSI AT -20F, MOP: 2218 PSI AT 250F, BODY: WCC/ A105, DBB, STEM: 316SS, 607, BALL:CF8M/ 316SS, SEAT: CF8M/316SS/NYL, LN: 6D-0244.2, SEALS: HNBR, DOM:07/15 A201, | 2 |
| Mechanical | Valve | VALVE: BALL, TYPE RTJ | VALVE: BALL, P/N: 14 IN X 600 CLASS, MFGR: CAMERON, SIZE: 14 IN, CLASS: 600 LB, 14 IN BALL VALVE MANUFACTURING BY CAMERON 14 INCH X600 CLASS BALL VALVE WITH HAND WHEEL GEAR OPERATED. WHEEL DIAMETER 24 INCH FULLY WELDED BALL VALVE FULL BORE ASME/ANSI CLASS 600(PN100) RTJ GASKET VALVE LENGTH-34.5 INCH BODY A105/ LF2 SEAT NYLON BALL A105/LF2 SEAT VITON A CAMERON DESCRIPTION AS PER QUOTATION: 14X14_RJ_T31_600_216_G CAMERON, VALVE, BALL, TRUNNION VALVE SIZE 14 IN (350 MM) NOMINAL BORE SIZE 14 IN (350 MM) PRESSURE CLASS ASME 600 (100 PN) STEM SIZE 3.0 END CONNECTION FLANGED RING JOINT (RJ) MODEL T31 TRIM 216 METHOD OF OPERATION GEAR OPERATED PAINT/COATING SHOP PRIMER NDE/NON-NDE NDE PO-25016, ITEM-1, CAMERON SINGAPORE PTE LTD. QA: 00. | 1 |
| Mechanical | Valve | VALVE: BALL, TYPE RF | VALVE: BALL, P/N: 2 IN X 300 CLASS, MFGR: AAC, SIZE: 2 IN, CLASS: 300 LB, TYPE: RF WCC, BODY MATL: A105, FLANGE HT: 8001555, PORT: FULL, OPERATED: LEVER. QA: 00, | 1 |
| Mechanical | Valve | VALVE: BALL, SIZE 3 IN | VALVE: BALL, P/N: 3 IN X 150 CLASS, MFGR: AGFT COMPANY, SIZE: 3 IN, CLASS: 150 LB, WCB 316 FB LF2/SS/DESEAL PTFE VB-60, BODY MATL: CS, PORT: FULL. QA: 00. | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: 370D6, MFGR: CAMERON, SIZE: 3X2, CLASS: 900, SN: 120577852-002, BOM:2365467-4511322, MODEL: 370D6, 24YRF23, API: 6D / OSL1, MOP:2250 PSI AT -20 to 100 0F, 2217 PSI AT 250 0F, BODY: WCC/ A105, DBB, STEMP: 316 SS 607, BALL: 316SS / CF8M, MIT: , SEAT: 316SS/ CF8M/ NYL, LN: 6D, SEAL: HNBR, ISO: , DoM: 07/15 | 4 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: 370D6, MFGR: CAMERON, SIZE: 6X4, CLASS: 600, SN: 120481812-006, BM:50274720, MODEL: 370D6, API: 6D, MOP: 1480 PSI AT -20 to 100 DEG F, 1332 PSI AT 250 DEG F, BODY: CS, DBB, STEM: TY 630 ENP, 6FA, BALL: SS, MIT: , SEAT:SS/NYL6, LN: 6D-0244 2, SEAL: HNBR, ISO: 14313, DoM: 04/15, A201. | 2 |
| Mechanical | Valve | VALVE | VALVE: BALL, P/N: 6000002616, MFGR: DSI VALVE, VALBART 8 INCH 2500# BALL VALVE RTJ, FB, TRUNNION MOUNTED, API 6D LF2 BODY, F51 BALL/STEM, LIPSEAL PEEK SEAT INSERTS GEAR, USED FOR SP TEST SEPERATOR, MRC GLOBAL PART: 6000002616. | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: 6D-0285, MFGR: NEWAY, SIZE: 20, CLASS: 600, BODY: A105N, STEM: A105N/ ENP, BALL: A105/ ENP, SEAT: NYLON-12, O-RING: HNBR-90, MOP-1480 AT -200F, WOG 1334 AT248 DEG F, FIG NO. 20FP-BS6R-A105N-77333-NC-G-001, S.N. 48069-020-6, NACE, F-F:1194, DATE: 08/13, DBB, MADE IN CHINA | 1 |
| Mechanical | Valve | VALVE: BALL,SIZE 3/4 IN | VALVE: BALL, P/N: A5156, MFGR: CHEROFLOW, BS; 5351, MATL: 316PTFE, SIZE: 3/4 IN,SOFTGOODS PTFE, QA: 00 | 4 |
| Mechanical | Valve | VALVE:BALL, TYPE BALL | VALVE: BALL, P/N: B5-16 INCH, MFGR: CAMERON, VALVE WITH ACTUATOR, VALVE SPECIFICATION: TYPE: BALL, MODEL: B5, SIZE: 16, CLASS: 600, ENDS: RF, SEALING: SOFT, MAX DESIGN TEMP. [ C]: 65.5, MAX OPER. TEMP. [ C]: 37.7, SERVICE: HC, OPERATOR TYPE REQUIRED: PNEUMATIC, BODY/ CLOSURE/ TOP COVER: CS, TRIM: CS, MAIN SEAL: SOFT, BODY: A350 LF2, CLOSURES / BONNET: A350 LF2, TOP COVER: A350 LF2, BALL / GATE: A350 LF2 + 25 M ENP, STEM: AISI 4140 + 25 M ENP, SEATS: A350 LF2 + 25 M ENP, SPRINGS: X 750, BOLTING: L7M / 7M, BOLTING COATING: ZINC + XYLAN 1424, MAIN SEAL: VITON AED, STEM SEALS: VITON AED, SEAT SEALS : VITON AED, STATIC SEALS: VITON AED, SEAT CONFIGURATION: SR, ACTUATOR SPECIFICATION: MFGR: BETTIS, MODEL: G5024-SR-4(CW), OPERATING PRESS: 60-100 PSI, MAX PRESS: 140 PSI, TEMP:26-200DEGF, TAG: SDV-91905 | 1 |
| Mechanical | Valve | VALVE:BALL, TYPE BALL | VALVE: BALL, P/N: B5-20 INCH, MFGR: CAMERON, VALVE WITH ACTUATOR, VALVE SPECIFICATION: TYPE: BALL, MODEL: B5, SIZE: 20, CLASS: 600, ENDS: RF SEALING: SOFT, MAX DESIGN TEMP. [ C]: 65.5, MAX OPER. TEMP. [ C]: 37.7, SERVICE: HC, OPERATOR TYPE REQUIRED: PNEUMATIC, BODY/ CLOSURE/ TOP COVER: CS, TRIM: CS, MAIN SEAL: SOFT, BODY: A350 LF2, CLOSURES / BONNET: A350 LF2, TOP COVER: A350 LF2, BALL / GATE: A350 LF2 + 25 M ENP, STEM: AISI 4140 + 25 M ENP, SEATS: A350 LF2 + 25 M ENP, SPRINGS: X 750, BOLTING: L7M / 7M, BOLTING COATING: ZINC + XYLAN 1424, MAIN SEAL: VITON AED, STEM SEALS: VITON AED, SEAT SEALS : VITON AED, STATIC SEALS: VITON AED, SEAT CONFIGURATION: SR, ACTUATOR SPECIFICATION: MFGR: BETTIS, MODEL: G5024-SR-4(CW), OPERATING PRESS: 60-100 PSI, MAX PRESS: 140 PSI, TEMP:26-200DEGF, TAG: SDV-85905 | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: C-5760-71-2200-NV-NG, MFGR: PBV USA INC, FIG. No. C-5760-71-2200-NV-NG, SIZE: 12X10, CLASS: 600, MOP: 1480 AT -15F, MOP: 1335 AT 230F, DBB NACE API 607/6FA, BODY: A105/ A350 LF2, BALL: CS ENP, STEM: CS ENP, SEAT: NYLON, SEAL: VITON, SERIAL No.: 1340631 MO 21059, ASSY. DATE: 01 12 06. | 2 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: DBB 60-0001.4, MFGR: DRESSER, INC., API 6D, DBB 60-0001.4, SERIES: B5 RF X RF, SIZE: 12, CLASS: 600, BODY: A350 LF2, STEM: NI / CS, BALL/GATE: NI / CS, SEAT : NI / CS, SERIAL No.: 06442860-3-1, MOP: 1290 AT 350 DEG F, 1480 AT -20 DEG F, DOM: 1/ 2006, P.O.# 170528-02, API. 6FA NACE, ISO: 14313. | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: FBV3-50, MFGR: WATTS REGULATOR, SUPPLIER: VIKING, SIZE: 1/2 IN, CONN: FNPT, BODY MATL: BRASS, PORT: FULL, OPERATED: HANDLE, CONFIG: 2-WAY, ADDTL DESC: BRASS BALL VALVE, PRESS: 300 PSIG, 150 WSP. QA: 00. | 3 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: FIG S-6410-31-3600-FT-NL-I2, MFGR: FARUM ENERGY TECH, SIZE: 1 IN, CLASS: 150, BODY MATL: CF8M. QA: 00. | 4 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: L2FF10, MFGR: L&T VALVES LTD, SIZE: DN 100, 3 INCH, CLASS: 150, CAT: L2FF10, S. No.: D313134, 20 BAR AT 38C, 5 BAR AT120C, BODY: WCB, STEM: SS316, BALL: SS, SEAT: RPTFE, DATE: 11/2015, | 3 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: NA, MFGR: FORUM, VALVE PBV, MODEL: C-6760-71.2236.NV-NB-CMPO-6D, VALVE SIZE:24 INCH, | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: NA, MFGR: LARSEN & TURBO LTD, CLASS: 150, SIZE: DN 150, MOP: 20 BAR AT 38 0C, MOP: 5 BAR AT 220 0C, S/No: 13512523, B0DY: SS, STEM: SS316, BALL: SS, SEAT: RPTFE. 1 NOS OF VALVE. | 1 |
| Mechanical | Valve | VALVE: BALL, SIZE NA | VALVE: BALL, P/N: SS43GXF4 , MFGR: WHITEY, TEMPERATURE RATING: 0-2500 PSI, 3 WAY BALL VALVE, SIZE NA ,DESIGN RATING NA, TRIM NA, CONNECTION NA, BODY MATERIAL NA, PORT NA, TYPE NA, OPERATED NA, SOFTGOODS NA, CONFIGURATION NA, QA: 00. | 2 |
| Mechanical | Valve | VALVE:BALL | VALVE: BALL, P/N: SS-83XKF4, MFGR: SWAGELOK, TYPE: MANUAL, SIZE: 1/4 IN, DESIGN RATING: 250 DEG F @ 1000 PSIG /121 DEG C @ 68.9 BAR, 6000 PSIG @ 100 DEG F /413 @ BAR 37 DEG C, CONN: FNPT, BODY MATL: SS, TRIM: PCTFE SEATS, PORT:FULL, OPERATED: HAND LEVER, TEMP RATING: 37 DEG C TO 121 DEG C, SOFTGOODS: FLUOROCARBON FKM, CONFIG: 3-WAY, EXTRA DESC: NITRONIC 60 SS, USE FOR WELLHEAD CONTROL PANEL. QA: 00. | 7 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: TRA633G, MFGR: AUDCO INDIA LTD, PN: 100, CL.: 600, CAT. TRA633G, MOP: 103.4 BAR )+(1500PSI) AT -46 0C (-50 0F), MOP: 101.8 BAR (1476 PSI) AT 121 0C (250 0F), SIZE: DN 200 X 150 (8INCHX6INCH) BODY: LCC, BALL: LF2+ENP, SEAT: NYLON, STEM: F316, DATE: 06/13, S.No.: 0006, TAG No.: L25JE3CBB, PO.SL.No.: 1511B/17-3. | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: TRA633G, MFGR: AUDCO INDIA LTD, PN: 50, CL:300, CAT: TRA633G, MOP: 51.0 BAR (740 PSI) AT-20 0C (-4 0F), MOP: 45.1 BAR (654 PSI) AT150 0C (302 0F), SIZE: DN 150X100 (6INCHX4INCH) S.No.: 0047, BODY: WCB, SEAT: RPTFE, BALL: F316, STEM: F316, DATE: 06/13, TAG No.: L25FA3CFB 14740-P. | 1 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: TRAB33G,, MFGR: AUDCO INDIA LTD, CL.: 600, CAT No. TRAB33G, MOP: 103.4 BAR (1500 PSI) AT -46 DEG C (-50 DEG F), 101.8 BAR (1476 PSI) AT 121 DEG C, SIZE: DN 600X500 (24IN X20IN), S.No: 0002, BODY: LCC, SEAT: NYLON, BALL: LF2+ENP, STEM: F316, DATE: 06/13, TAG No. L25JE3CBB, PO.SL.No.: 1511B/17. | 2 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N: W330, MFGR: VELAN, ADD DESC: BODY: CF8M, SEAT: MPTFE, STEM; 316SS, BALL: 316SS, B16.34 CL 150, CWP: 275 PSIG, MAX TEMP: 450 DEG F, FIG: 01413-SSEZ. QA: 00. | 4 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL, P/N:20, CL: 150, MFGR: AUDCO INDIA LTD, ISO: 14313, CAT: TFA233G, SIZE: DN 200 (8 INCH), SERIAL NO.: 0047, BODY: WCB, SEAT: RPTFE, BALL: A105+ENP, STEM: TP.410, DATE: 06/13 TAGNO. L25BA3ABB, PO.SL. NO: 14740-P, MOP: 19.6 BAR (284 PSI) AT -200C (40F), MOP: 13.8 BAR (200 PSI) AT 2000C (392 DEG F). | 7 |
| Mechanical | Valve | VALVE: BALL | VALVE: BALL,P/N: J17H175D, MFGR: MILWAUKE, SIZE: 2 IN, DESIGN RATING: 150 PSI, BODY MATL: 2000 WOG, USE FOR INSTRUMENT AIR COMPRESSOR VESSEL DISCHARGE LINE | 1 |
| Mechanical | Valve | VALVE: BUTTERFLY, TYPE: WAFER | VALVE: BUTTERFLY, TYPE: WAFER, DESIGN RATING 250 LB, CONN FLG, BODY MATL CI, TRIM SS304, OPERATED HANDWHEEL, TEMP RATING 250 LB @ 100 DEG F, SOFTGOODS EPDM, BUTERFLY VALVE; CLASS.250; P/N: 12 IN X 250; MATERIAL: CAST IRON/ SS304 ; TYPE: ANSI-150 LB; FE CONSTRUCTION; PO NO: 1270126, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 1 |
| Mechanical | Valve | VALVE: BUTTERFLY, TYPE: WAFER | VALVE: BUTTERFLY, TYPE: WAFER, DESIGN RATING 250 LB, CONN FLG, BODY MATL CI, TRIM SS304, OPERATED HANDWHEEL, TEMP RATING 250 LB @ 100 DEG F, SOFTGOODS EPDM, BUTERFLY VALVE; CLASS.250; P/N: 4 IN X 250; MATERIAL: CAST IRON/ SS304 ; TYPE: ANSI-150 LB; FE CONSTRUCTION; PO NO: 1270126, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 1 |
| Mechanical | Valve | VALVE | VALVE: CHECK, 5PSI, P/N: 139527GT, MFGR: GENIE, MODEL: Z 45/25, SERIAL NUMBER: 16688, EQUIPMENT NAME: MANLIFT, ENGINE: DEUTZ, CAPACITY: 30KW, MODEL: F3L 1011, ENGINE SERIAL NUMBER: 00514883, RPM: 2800, EQUIPMENT TAG: BY-MLG-602. | 1 |
| Mechanical | Valve | VALVE: CHECK | VALVE: CHECK, BODY MATL: A105 (Q&T) / A216 WCB, GOODWIN INTERNATIONAL CHECK VALVE, SIZE: 2INCH ANSI-1500 STY-BSR SERIAL NO-AM 1446/10 1, CWP PSI: 3705, CODE NO: CUUPR/YS TAG NO-16507/10 VALVE CONSTRUCTION, BODY: A105 (Q&T) / A216 WCB, PLATES: COBALT ALLOY 6 BODY, SEAT: COBALT ALLOY 6 / STELLITE 6, PLATE SEAT: AS, PLATE END CONNECTION: RAISE FACE, 3.2-6.3 /M SPIRAL GROOVE, SPECIAL FEATURE: NACE MR-01-75 / ISO 15156, SPRING: INCONEL X750, WETTED PARTS :HINGE/STOP, PIN: AISI 316, OTHER: AISI 316 FLANGE STANDARD / END CONNECTION: ASME B16.5 | 1 |
| Mechanical | Valve | VALVE: | VALVE: CHECK, CXDA-XCN, P/N: 226758GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE | VALVE: CHECK, P/N: 129-1549 , MFGR: CATERPILLAR, ENGINE MODEL: G3606, SERIAL NO: 3XF00113, ARRANGEMENT NO: 149-6196,7C-4106, POWER: 1666 HP/1242 KW, USED FOR CATERPILLAR ENGINE CYLINDER HEAD COMBUSTION CHAMBER, FOLLOW 3XF113 PART BOOK, PAGE NO: 37, ITEM NO: 10, QA:00 | 11 |
| Mechanical | Valve | VALVE | VALVE: CHECK, P/N: 26625/32, MFGR: GOODWIN INTERNATIONAL, 6 INCH NRV, 150 CLASS, SERIAL NO - 26625/32, CODE NO- OSSPR/YS, TEST PRESSURE-31 BAR, DN-150, MAXP- 6.6 BAR AT 343DEG C, CUST ITEM NO.32, TAG NO. P056833/32, GOODWIN CHECK VALVE, USE FOR FGC 6 INCH DISCHARGE LINE. | 1 |
| Mechanical | Valve | VALVE | VALVE: CHECK, P/N: F08-0114C-02TY, MFGR: VELAN, SWING CHECK VALVE, FLANGED END B16.5, 50MM (2IN ) CLASS 150, VERTICAL CAST BOLTED BONNET ASTM A216WCB, 13 CR TRIM 8, API600 ,INCLUDED 3.1 MILL CERTIFICATE, USED FOR MCS I/A COMPRESSOR CAE-2250/2251. | 1 |
| Mechanical | Valve | VALVE: CHECK | VALVE: CHECK, P/N: HLR 7930, MFGR: HLR CONTROLS, TYPE: PNEUMATIC SAND PROBE RELAY, SIZE: 1.5 IN DIA X 4.25 IN L, DESIGN RATING: 10000 PSI MAX, CONN: 1/4 IN-18 FNPT, MATL: 316 SS, CONFIG: 3-WAY NO, 2 POSITION, USE FOR ALERT CONTROL COMPONENTS IN WELLHEAD CONTROL PANEL. QA: 01, 21. | 2 |
| Mechanical | Valve | VALVE: CHECK | VALVE: CHECK, P/N: QTS3UCS316T3, MNPTX2FNPTX2FNPT, MFGR: QUEST TEC SOLUTIONS, OFFSET/FLOW CONTROL CHECK VALVE, COME WITH UNION SOCKET, INTERNAL REFERENCE: 125638, QUEST-TEC 3U VALVE CS/316 TEFLON PACKAGE 3/4IN MNPT X 1/2IN FNPT X 1/2IN FNPT, PRESSURE RATING: 4000 PSI @100 DEG F, PROCESS CONNECTION: 3/4 IN MNPT, LEVEL GAUGE CONNECTION: 1/2 IN UNION, BOTTOM /DRAIN CONNECTION 1/2 IN FNPT. | 3 |
| Mechanical | Valve | VALVE: | VALVE: CHECK, PILOT CLSD CODA-XCN, P/N: 226757GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE:CHECK, PORT 3/8 IN | VALVE: CHECK, PORT 3/8 IN, P/N: SS-CHS6-20, MFGR: SWAGELOK, TYPE AS PER MODEL. | 4 |
| Mechanical | Valve | VALVE: CHK, SIZE: 1/2 IN | VALVE: CHECK, SIZE: 1/2 IN, STYLE: HORIZONTAL, CONFIG: 1-WAY, 1/2 RESTRICTION CHECK VALVE (ITEM#7), PART NUMBER: 923221002, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., QACode:17:Manu/Vend Maint Doc/ IOM, P&ID, MODEL NO:9232210020 | 2 |
| Mechanical | Valve | VALVE: CHECK | VALVE: CHECK, TYPE: DUO CHEK II DUAL PLATE WAFER STYLE CHECK VALVE, P/N: 12G30SPF-9, MFGR: CRANE, SIZE: 12 IN, CLASS: 300 LBS RF, S/N: LJ113, FIG: G-30 SPF-4/468, MAX WORKING PRESSURE: 740 PSI, BODY: WCB, PLATE MATL: 316SS, STYLE: WAFER, USE FOR COMPRESSOR, PROPANE UNIT A. QA: 02. | 1 |
| Mechanical | Valve | VALVE: CHK, SIZE: 1/2 IN | VALVE: CHK, SIZE: 1/2 IN, STYLE: HORIZONTAL SWING, CONFIG: 1-WAY, UBW N99S 1/2 IN SWING CHECK VALVE W/99SD SOFT DISC(ITEM#6), HORIZONTAL SWING, PART NUMBER: 460491004, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., QACode:16:OEM Parts/ Serv Certificate,17:Manu/Vend Maint Doc/ IOM, P&ID, MODEL NO:UBW N99S | 1 |
| Mechanical | Valve | VALVE: CHOKE | VALVE: CHOKE, P/N: 332-00270-001-01-2, AUTO CHOKE VALVE, MFGR: N-LINE VALVES, MODEL: 4 AFI, S/N:031027, PO:6993388, NOMINAL SIZE: 4, MAX ORIFICE: 128, MATL: EE 0.5, TEMP: U, PSL: 2, PR: 1, RATED WP: 6170 PSIG, USE 6-52 CLAMP HUB INLET AND OUTLET CONNECTION, GRAYLOC, QA: 21, 22. | 2 |
| Mechanical | Valve | VALVE: CONTROL | VALVE: CONTROL (MASONEILAN 88-21124 GLOBE VALVE), P/N: 88-21124 CV-6, S/N: I-13-105959-017, MFGR: MASONEILAN, TYPE: LEVEL GLOBE, CV-6, SET PRESS: 3-15 PSI, INLET CONN: 2 INCH, OUTLET CONN: 2 INCH, CLASS: 600 RF, BODY MATL: 216 GR WCC, TRIM: 316 HF SEAT, DN/NPS: 2 INCH, ADD DESC: ACTUATOR TYPE: MODEL: 88, TYPE: SPRING DIAPHRAGM, AIR TO OPEN, RANGE: 3-15 PSI, SUPPLY: 25 PSI, DIGITAL CONTROLLER POSITIONER: DIGITAL VALVE POSITIONER, PRESSURE: 150 PSI, TEMP: -40 C TO 85 C, VOLT: 30 VDC, OUTPUT: 4-20 MA, P/N: SVI2-21113111, GAUGE: 0-100 PSIG, MFGR: DRESSER MASONEILAN. REGULATOR: MODEL: 78-40, TYPE: AIR, INLET PRESS (P1): 215 PSI MAX, PRESSURE RANGE (P2): 5 TO 100 PSI, SIZE: 1/4 IN, CONN: FNPT. MFGR: DRESSER MASONEILAN. USED AT HP SEPARATOR TRAIN-5 & 6 CONDENSATE SIDE. EXTRA DESCRIPTION: COMPLETE SET OF LEVEL CONTROL VALVE, ALL TUB FITTINGS SHOULD BE SWAGELOK. QA: 00. | 2 |
| Mechanical | Valve | VALVE: CONTROL | VALVE: CONTROL, P/N: 1042016-1000, MODEL NO: ACT2000-590P, INFO377, S/N: 80952, MFGR: SOLAR TURBINES, OTHER MFGR: PRECISION, P/N: 5002600-001, ENCL TYPE : 3, VOLTS: 120 VDC, WATT: 800 W MAX, USED FOR ARS 100S GAS TURBINE-DRIVEN COMPRESSOR SET AND TAURUS 60S GAS TURBINE-DRIVEN GENERATOR SET. QA: 22. | 1 |
| Mechanical | Valve | VALVE: CONTROL, TRIM NA | VALVE: CONTROL, P/N: 667-ET, MFGR: FISHER, TYPE: CONTROL VALVE, LV/LY-31305, INLET SIZE NA, INLET CONNECTION NA, OUTLET SIZE NA, OUTLET CONNECTION NA, DESIGN RATING NA, BODY MATERIAL NA, TEMPERATURE RATING NA, SOFTGOODS NA, (LV/LY-31305) 1 INCH 300# RF FISHER CONTROL VALVE QA: 00 | 1 |
| Mechanical | Valve | VALVE | VALVE: CONTROL, P/N: ET-NPS-2, MFGR: FISHER, TYPE: ET, VALVE SIZE: NPS 2, BODY MATERIAL: WCC STEEL, END CONNECTION: RF FLG, RATING: CL300, TRIM STYLE/CHARACTERISTIC: EQUAL PERCENT, SHUTOFF: ANSI CL IV, BODY STYLE: GLOBE, FLOW: DOWN, GUIDING: CAGE, BALANCE: BALANCED, PORT DIAMETER: 2 5/16 INCH, VALVE ACTION: PDTC. ACTUATOR TYPE: 667, ACTUATOR SIZE: 40I, OPERATING RANGE(STD): 0 TO 18 PSIG, BENCH SET LOWER(STD): 6, BENCH SET UPPER(STD): 15 PSI, ACTUATOR STYLE: SPRING & DIAPHRAGM, FAIL ACTION: DOWN, FAILS VALVE: CLOSE. POSITIONER TYPE: DVC6200, CONSTRUCTION: ALUMINUM, PROTOCOL: HART-5, DIAGNOSTIC TIER: HART COMMUNICATING-HC, APPROVAL AGENCY: FM, OUTPUT/SUPPLY GAUGES: 0-60 PSIG/0-4 BAR, DVC MOUNTING METHOD: YOKE (INTEGRAL) - INTERNAL PASSAGEWAY, TUBING & FITTING MATERIAL: 3/8 INCH 316 SST/SST SWAGELOK, SUPPLY REGULATOR/FILTER: 67CFR FILTER/REGULATOR. SERIAL NUMBER 0017517426, COMPLETE SET, USE AT LP GAS BOOT WATER OUTLET CONTROL VALVES. | 2 |
| Mechanical | Valve | VALVE | VALVE: CONTROL, P/N: ET-NPS-3, MFGR: FISHER, TYPE: ET, VALVE SIZE: NPS 3, BODY MATERIAL: WCC STEEL, END CONNECTION: RF FLG, RATING: CL300, TRIM STYLE/CHARACTERISTIC: EQUAL PERCENT, SHUTOFF: ANSI CL IV, BODY STYLE: GLOBE, FLOW: DOWN, GUIDING: CAGE, BALANCE: BALANCED, PORT DIAMETER: 2 5/16 INCH, VALVE ACTION: PDTC. ACTUATOR TYPE: 667, ACTUATOR SIZE: 46I, OPERATING RANGE(STD): 0 TO 18 PSIG, BENCH SET LOWER(STD): 4, BENCH SET UPPER(STD): 15 PSI, ACTUATOR STYLE: SPRING & DIAPHRAGM, FAIL ACTION: DOWN, FAILS VALVE: CLOSE. POSITIONER TYPE: DVC6200, CONSTRUCTION: ALUMINUM PROTOCOL: HART-5, DIAGNOSTIC TIER: HART COMMUNICATING-HC, APPROVAL AGENCY: FM, OUTPUT/SUPPLY GAUGES: 0-60 PSIG/0-4 BAR, DVC MOUNTING METHOD: YOKE (INTEGRAL) - INTERNAL PASSAGEWAY, TUBING & FITTING MATERIAL: 3/8 INCH 316 SST/SST SWAGELOK SUPPLY REGULATOR/FILTER: 67CFR FILTER/REGULATOR. SERIAL NUMBER 0017522163, COMPLETE SET, USE AT FLASH GAS SEPARATOR CONDENSATE OUTLET CONTROL VALVES. | 2 |
| Mechanical | Valve | VALVE: CONTROL, TRIM NA | VALVE: CONTROL, P/N: LV/LY-35105, MFGR: BETTIS, TYPE :BETTIS LEVEL CONTROL VALVE, TRIM NA , SET PRESSURE NA, OPERATED NA, INLET SIZE 1 IN 150# RF, INLET CONNECTION NA, OUTLET SIZE NA, OUTLET CONNECTION NA, DESIGN RATING NA, BODY MATERIAL NA, TEMPERATURE RATING NA, SOFTGOODS NA,QA: 00 | 1 |
| Mechanical | Valve | VALVE | VALVE: CONTROL, P/N: NOTCHFLO DST, MFGR: FISHER, TYPE: NOTCHFLO DST, BODY STYLE: GLOBE, VALVE SIZE: NPS 1, BODY MATERIAL: WCC STEEL, END CONNECTION: RF FLG, FLOW: FLOW UP, GUIDING: CAGE, BALANCE: BALANCED, PORT DIAMETER: 1.00 INCH, VALVE ACTION: PDTC, SHUTOFF: ANSI CL V, TRIM STYLE/CHARACTERISTIC: LINEAR. ACTUATOR TYPE: 667 ACTUATOR SIZE: 40I, OPERATING RANGE(STD): 0 TO 33, PSIG, BENCH SET LOWER(STD): 20, BENCH SET UPPER(STD): 30 PSI, ACTUATOR STYLE: SPRING & DIAPHRAGM, FAIL ACTION: DOWN, FAILS VALVE: CLOSE. POSITIONER TYPE: DVC6200, CONSTRUCTION: ALUMINUM, PROTOCOL: HART-5, DIAGNOSTIC TIER: ADVANCED-AD, APPROVAL AGENCY: FM, OUTPUT/SUPPLY GAUGES: 0-60 PSIG/0-4 BAR, DVC MOUNTING METHOD: YOKE (INTEGRAL) - INTERNAL PASSAGEWAY, TUBING & FITTING MATERIAL: 3/8 INCH 316 SST/SST SWAGELOK, SUPPLY REGULATOR/FILTER: 67CFR FILTER/REGULATOR. SERIAL NUMBER 0017491021, COMPLETE SET, USE AT HP SEPARATOR TRAIN-1 TO 4 CONDENSATE OUTLET CONTROL VALVES. | 4 |
| Mechanical | Valve | VALVE:CONTROL TYPE:LEVEL SET | VALVE: CONTROL, TYPE: NOTCHFLO DST, BODY STYLE: GLOBE, VALVE SIZE: NPS 1, BODY MATERIAL: WCC STEEL, END CONNECTION: RF FLG, RATING: CL600, FLOW: FLOW UP, GUIDING: CAGE, BALANCE: BALANCED, PORT DIAMETER: 1.00 INCH, VALVE ACTION: PDTC, SHUTOFF: ANSI CL V, TRIM STYLE/CHARACTERISTIC: LINEAR. ACTUATOR TYPE: 667, ACTUATOR SIZE: 40I, OPERATING RANGE(STD): 0 TO 33 PSIG, BENCH SET LOWER(STD): 20, BENCH SET UPPER(STD): 30 PSI, ACTUATOR STYLE: SPRING & DIAPHRAGM, FAIL ACTION: DOWN, FAILS VALVE: CLOSE. POSITIONER TYPE: DVC6200, CONSTRUCTION: ALUMINUM, PROTOCOL: HART-5, DIAGNOSTIC TIER: PERFORMANCE-PD, APPROVAL AGENCY: FM, OUTPUT/SUPPLY GAUGES: 0-60 PSIG/0-4 BAR, DVC MOUNTING METHOD: YOKE (INTEGRAL) - INTERNAL PASSAGEWAY, TUBING & FITTING MATERIAL: 3/8 INCH 316 SST/SST SWAGELOK SUPPLY REGULATOR/FILTER: 67CFR FILTER/REGULATOR W/ SST DRAIN. SERIAL NUMBER F001230637, USE AT HP SEPARATOR TRAIN-1 TO 6 WATER OUTLET CONTROL VALVES. | 6 |
| Mechanical | Valve | VALVE: CONTROL, FRICK COMPR | VALVE: CONTROL, VALVE TYPE: ET, CONTROLLER MODEL: C1P-1, MFGR: FINISH THOMPSON INC., SIZE: 6 INCH, BODY MATL: WCC, RATING: 300 RF, CHARACTERISTICS: WISHPER I (LINEAR), TRIM NO: 1, TRAVEL: 2 INCH, PORT DIAMETER: 7 INCH; SHUTOFF: ANSI CLASS IV, PACKING: SINGLE PTFE; SEAT RING: S41000 SST , ACTUATOR TYPE: 667, SIZE: 70, BENCH SET: 10-30 PSIG, ACTUATOR STYLE: SPG & DIAPH,FAIL DIRECTION: FAIL DOWN, POSITIONER MODEL: 3582 , INPUT SIGNAL: 3 TO 15 PSIG, OPERATION RANGE: 6 TO 30 (0 TO 33) PSIG , CAM: A; ACTION: DIRECT; GAUGES: YES , MOUNTING FOR 3582: FACTORY MOUNTED , SUPPLY REG/FILTER: 67CFR FILTER/REGULATOR, ELEMENT TYPE: BOURDON TUBE, ELEMENT RATING: 0 TO 300 PSIG , ELEMENT MATERIAL: 316 SST, CONTROL MODE: PROPORTIONAL; ACTION: DIRECT; OUTPUT SIGNAL: 3 TO 15 PSIG, GAUGES: YES , MOUNTING FOR C1P-1: FACTORY MOUNTED , SUPPLY REG/FILTER: 67CFR FILTER/REGULATOR. BACK PRESSURE CONTROL VALVE PV-301 FOR PROPANE LOOP.PR22261858-V2 MTOQ/JBIE, | 1 |
| Mechanical | Valve | VALVE: TYPE COUNTER BALANCE | VALVE: COUNTER BALANCE, CBCA-LIN, P/N: 139323GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: | VALVE: COUNTER BALANCE, CBEJ-LIN@700 , P/N: 226756GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: | VALVE: COUNTER BALANCE, CWCA-LIN@600, P/N: 60331GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 2 |
| Mechanical | Valve | VALVE: TYPE COUNTER BALANCE | VALVE: COUNTER BALANCE, P/N: 62506GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 4 |
| Mechanical | Valve | VALVE: | VALVE: COUNTERBALANCE, P/N: 74872GT, MFGR: GENIE, RATING: 3000 PSI USE WITH SLAVE CYLINDER 226537, USE FOR GENIE MANLIFT, MODEL-Z60, SERIAL NO:Z6012-11853, MODEL YEAR:2012, RATED CAPACITY-227KG, MANUFACTURER: TEREX SOUTH DAKOTA INC, EQUIPMENT TAG: JB-MLG-001,BY-MLG-606 & BY-MLG-601 | 2 |
| Mechanical | Valve | VALVE | VALVE: CYLINDER HEAD, P/N: 30036K, MFGR: WAUKESHA, NBL VALVE FOR WAUKESHA GENERATOR MODEL NO-L36GL,SERIALNO-60333/1. QA: 00. | 14 |
| Mechanical | Valve | VALVE: | VALVE: DELIVERY, P/N: 15841-51030, MFGR: KUBOTA, END USE: FOR KUBOTA GENERATOR, GENERATOR MODEL: J110 & J310-STD, GENERATOR SERIAL NO.: 702611, GENERATOR CODE NO.: G3913-00000, ENGINE MODEL-D722-B-SEC-1, ENGINE CODE NO.: 1K192-00000, ENGINE SERIAL NO.: 8L3919, GENERATOR RATED OUTPUT: 10.0 KVA, GENERATOR RATED VOLTAGE-380V, GENERATOR RATED CURRENT- 15.2 A, GENERATOR FREQUENCY- 50 HZ, PHASE- 3, POWER FACTOR-0.8, MANUFACTURER: KUBOTA | 6 |
| Mechanical | Valve | VALVE: EXHAUST | VALVE: EXHAUST, P/N: 148-7455, MFGR: CATERPILLAR, USE FOR CAT 3306DI CYL HEAD GROUP. QA: 00. | 5 |
| Mechanical | Valve | VALVE: EXHAUST | VALVE: EXHAUST, P/N: TP7510, MFGR: AQUAMATIC, TYPE: AIR, BODY MATL: STEEL, ADDTL DESC: NORMALLY CLOSED, SPRING ASSIST CLOSED, MT: 150 F, USE FOR INSTRUMENT AIR DRYER. QA: 00. | 1 |
| Mechanical | Valve | VALVE | VALVE: GATE, P/N: 04.0239.0454, MFGR: TEREX, SINGLE-ACTING VALVE, FOR CRANE AIR CONDITION SYSTEM, TAG NO: BY-CR-002, MODEL NO: RC60, SL NO: 606023, CAPACITY: 60 TON, POWER: 164KW AT 2200 RPM, MANUFACTURING YEAR: 2012. | 1 |
| Mechanical | Valve | VALVE: GATE, TYPE: RF | VALVE: GATE, P/N: 8 IN X 6 IN X 900 CLASS, MFGR: CAMERON, TYPE: RF, SIZE: 8 IN X 6 IN, CLASS: 900 LB, PORT: REDUCED, OPERATED: WHEEL, GATE VALVE WCC, RF, ASME B16.35. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GATE | VALVE: GATE, P/N: N/A, MFGR: MUELLER, SIZE: 10 INCH, 150 CLASS. N.R.S. RESILIENT WEDGE GATE VALVE FLANGE END, 250 PSI MAXIMUM PRESSURE 500 PSI. END USE: FIRE WATER SYSTEM. | 1 |
| Mechanical | Valve | VALVE: GATE, SIZE: 3/4 IN | VALVE: GATE, SIZE: 3/4 IN, CLASS 800LB, PORT FULL, DESIGN RATING 800LB, BODY MATL CS, TRIM API #8 TRIM, OPERATED HANDWHEEL, TEMP RATING 800LB@100 DEG F, SOFTGOODS TEFLON PACKING, STYLE BB, RP, STEM DESIGN FNPT, GATE VALVE; CLASS.800; P/N: 3/4 IN X CLASS 800; MATERIAL: CS; TYPE: CS BODY, API #8 TRIM, BB RP, EXTENDED BODY; FE CONSTRUCTION; PO NO: 1290100-1,2 ,3 ; 15 NOS, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:GASADH1F | 14 |
| Mechanical | Valve | VALVE: GATE, SIZE: 4 IN | VALVE: GATE, SIZE: 4 IN, CLASS 125 LB, PORT FULL, DESIGN RATING 125 LB, CONN FLG, BODY MATL DUCTILE IRON, TRIM W/BRONZE TRIM, OPERATED HANDWHEEL, TEMP RATING 100FH, STYLE BOLTED FLG BONNET, STEM DESIGN OUTSIDE SCREW, GATE VALVE; CLASS.125; P/N: 4 IN X 125; MATERIAL: DUCTILE IRON BODY; TYPE: ASTM 536; FE CONSTRUCTION; PO NO: 1270123-2, QA Code:02, MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 2 |
| Mechanical | Valve | VALVE: GATE, SIZE: 4 IN | VALVE: GATE, SIZE: 4 IN, CLASS 150 LB, PORT FULL, DESIGN RATING 150 LB, CONN FLG, BODY MATL A216WCB/SS316, TRIM MONEL TRIM, OPERATED HANDWHEEL, TEMP RATING -20 TO 285FH, STYLE BOLTED FLG BONNET, STEM DESIGN OUTSIDE SCREW, GATE VALVE; CLASS.150; P/N: 4 IN X 150; MATERIAL: A216WCB/SS316; TYPE: SS316; FE CONSTRUCTION; PO NO: 1274154-3, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 7 |
| Mechanical | Valve | VALVE: GATE, TYPE: ONE END NPT | VALVE: GATE, TYPE: ONE END NPT, PORT REDUCED, DESIGN RATING 1500LB, CONN SW, BODY MATL CS, TRIM HF (T#8) SW BB, OPERATED HANDWHEEL, TEMP RATING 100 DEG F, STYLE WELDED BONNET, STEM DESIGN OS&Y, GATE VALVE; CLASS.1500; P/N: 1 IN X 1500; MATERIAL: CS BODY; TYPE: SW BB; FE CONSTRUCTION;, QACode:02:MATERIAL/MILL CERTIFICATE,03:CVX Ordr #, Mat #, Heat/Cast #, SERIAL NO:NA, MODEL NO:NA | 2 |
| Mechanical | Valve | VALVE: GLOBE, SIZE: 1 IN | VALVE: GLOBE, P/N: 1 IN X 1500 CLASS, MFGR: BONNEY FORGE, SIZE: 1 IN, CLASS: 1500 LB, BODY MATL: A105N, GLOBE 1 IN 1500 CLASS NPT RB BB A105N/F6+HF/HF BFE BFE GLOBE VALVE, RB BB (DEVIATION - OFFER BOLTED BONNET INSTEAD OF WELDED BONNET) OS & Y BODY : A105N DISC : CR13 + HF STEM : CR13, SEAT : HF (OFFER TRIM 5 INSTEAD OF TRIM 8 - HIGHER SPECIFICATION) HANDWHEEL OPERATED SIZE 1IN X 1500 NPTF REF PO-28313, ITEM-2, SUPPLIER: MRC MSD ENGINEERING PTE LTD. QA: 00. | 2 |
| Mechanical | Valve | VALVE: GLOBE | VALVE: GLOBE, P/N: 152RF005, MFGR: TY VALVE, TYPE: GLOBE, SIZE: 6INCH, FIG: 152RF005, BODY: WCB, STEM: F6A, DISC: HF, SEAT: HF, M.D: 1207, SERIAL No. 11569007, B16.34 CLASS 150, MOP: 285 AT 100 0F, GASKET: G.W.GR. PACKING: GRAPHITE, TY VALVE CORPORATION, MADE IN KOREA. | 2 |
| Mechanical | Valve | VALVE: GLOBE, TYPE: RTJ | VALVE: GLOBE, P/N: 3 IN X 900 CLASS, MFGR: NEWMANS, SIZE: 3 IN, TYPE: BB OSY GLOBE, PLUG DISC RATING : 900 CLASS, ENDS: RTJ, BODY: A216 WCB, TRIM: API TRIM-8, OPERATION: GEAR, DESIGN: API 623, ASME B16.34, FIGURE NUMBER: 29J-CB2-GO REF PO-27165, ITEM-2, SUPPLIER: CAMERON SINGAPORE. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GLOBE, TYPE RTJ | VALVE: GLOBE, P/N: 4 IN X 900 CLASS, MFGR: NEWMANS, SIZE: 4 IN, TYPE : BB OSY GLOBE, PLUG DISC RATING: 900 CLASS, ENDS: RTJ, BODY: A216 WCB, TRIM: API TRIM-8, OPERATION: GEAR, DESIGN: API 623, ASME B16.34 FIGURE NUMBER : 29J-CB2-GO REF PO-27167, ITEM-1, SUPPLIER: CAMERON SINGAPORE. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GLOBE | VALVE: GLOBE, P/N: 4737K55, MFGR: MCMASTER-CARR, SIZE: 1 IN, DESIGN RATING: W.O.G. MAX. 1975 PSI AT 100 DEG F, BODY MATERIAL: FORGED STEEL A105N, CLASS: 800, CONNECTION: NPTF, OPERATED: HANDWHEEL, ORIGINAL MFGR: BONNEY FORGE, USE FOR GENERAL PURPOSE. QA: 00. | 1 |
| Mechanical | Valve | VALVE: GLOBE | VALVE: GLOBE, P/N: SB-V1, MFGR: SAMBO IND. CO., MODEL: SB-V1, RATIO: 3.5 : 1, TORQUE MAX: 980 N m, THRUST MAX: 141000 N, WEIGHT: 22KG, | 1 |
| Mechanical | Valve | VALVE: GLOBE, SIZE: 2 IN | VALVE: GLOBE, SIZE: 2 IN, CONN FNPT, BODY MATL CAST BRASS, TRIM: BRASS, ASTM B16, PORT BRASS, ASTM B16, OPERATED HANDWHEEL, SOFTGOODS PTFE OR FPPI, FPPI 06-830 ANGLE VALVE(ITEM#4), 2 IN UL, PART NUMBER: 460481009, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., QACode:17:Manu/Vend Maint Doc/ IOM, P&ID, MODEL NO:FPPI 06-830 | 3 |
| Mechanical | Valve | VALVE: GLOBE, SIZE:1/2 IN | VALVE: GLOBE, SIZE:1/2 IN, CONN: FNPT, BODY MATL: CAST BRASS, TRIM: BRASS, ASTM B16, PORT BRASS ASTM B16, OPERATED HANDWHEEL, SOFTGOODS PTFE OR FPPI, FPPI 06-820 ANGLE VALVE 1/2 IN UL (ITEM#15), PART NUMBER: 460481004, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., QACode:17:Manu/Vend Maint Doc/ IOM, P&ID, MODEL NO:FPPI 06-820 | 2 |
| Mechanical | Valve | VALVE: INTAKE | VALVE: INTAKE, P/N: 100-7860, MFGR: CATERPILLAR, USE FOR CAT 3306DI CYL HEAD GROUP. QA: 00. | 6 |
| Mechanical | Valve | VALVE: INTAKE | VALVE: INTAKE, P/N: 2W-7163, MFGR: CATERPILLAR, TYPE: AIR SHUTOFF, USDE FOR SP DIESEL GENERATOR, GENERATOR MODEL: 3508, SET ENGINE: 23Z03489-UP PURCHASE UNDER 18717 OP 09146000. QA: 13 | 1 |
| Mechanical | Valve | VALVE: INTAKE | VALVE: INTAKE, P/N: 3516, MFGR: BARBER INDUSTRIES INK., TYPE: AIR SHUT OFF, SIZE:BORE 4 IN, ADDTL DESC: RIGSAVER 4SGE SERIES AIR SHUT OFF VALVE, MODEL-3516, SERIAL NO: 10310, USE FOR SP GAS GENERATOR. QA: 22. | 1 |
| Mechanical | Valve | VALVE: NEEDLE,SIZE NA,TRIM NA | VALVE: NEEDLE, P/N: 01157, MFGR: PARKER FILTRATION, MODEL: 85, SIZE: 1/4IN, NPT, MAX. PR: 5000PSIG AT 200 DEG F, QA:00 | 1 |
| Mechanical | Valve | VALVE: NEEDLE, SIZE 1/8 IN | VALVE: NEEDLE, TYPE: SS INTEGRAL BONNET NEEDLE VALVE, P/N: SS-0RS2, MFGR: SWAGELOK, 0.09 CV, SIZE: 1/8 IN, DESIGN RATING: 5000 PSIG AT 100 F, CONN: TUBE FITTING, REGULATING STEM, ORIFICE DIAMETER: 0.080 IN, BODY MATL: 316 STAINLESS STEEL. QA: 18, 21. (I&E) | 1 |
| Mechanical | Valve | VALVE: PILOT | VALVE: PILOT, BRONZE PILOT FOR RELIEF VALVE, MODEL: LFPV20C, MFGR: WATTS WATER TECHNOLOGY COMPANY, SIZE: 1/2 IN, CODE NO: 9751-19, RANGE: 20-200 PSIG, DESIGN RATING: 400 PSIG, CONN: FNPT, BODY MATL: ASTM B62 BRONZE(STD), TRIM: 303 SS TRIM, SOFTGOODS: BUNA-N, CONFIG:1-WAY, USE FOR FIRE WATER PUMP ANGLE PATTERN SINGLE CHAMBER RELIEF VALVE. QA: 02, 08 & 17. | 1 |
| Mechanical | Valve | VALVE: PILOT | VALVE: PILOT, MODEL NUMBER: VAP-3501-181D-167, MFGR: VERSA, TYPE: PNEUMATIC ACTUATED VALVE, BODY MATERIAL: 316 SS, CONFIG: 3-WAY, 2-POSITION, PILOT PRESSURE: 55 TO 200 PSI, VALVE PRESSURE: 200 PSIG MAX, J/N: 268372-1-1, USE FOR JBGP WELLHEAD FLOW LINE ESDV & KT ESDV PANEL. QA: 01, 21. | 2 |
| Mechanical | Valve | VALVE | VALVE: PILOT, P/N: SL 09-25048, MFGR: ANDERSON GREENWOOD CORSSBY, TYPE: 25312D12 S1, SERIAL: 09-25048, SET PRESS: 1350 PSIG, TRIM: UVVV, | 1 |
| Mechanical | Valve | VALVE: CONTROL | VALVE: PRESSURE CONTROL, P/N: PCV-45002, MFGR: FISHER, VALVE TYPE: ET, BODY SIZE: 3 INCH, BODY MATL: WCC STEEL, RATING: 600 RF; TRIM NO: 1, END CONNECTION SIZE: 3 INCH, PORT SIZE: 2 5/16 INCH, CHARACTERISTICS: EQ%, FLOW DIRECTION: DOWN, SHUTOFF: CLASS IV, MAX RATED CV: 70.7, ACTUATOR TYPE: 667; ACTUATOR SIZE: 45, ACTUATOR STYLE: SPRING & DIAPHRAGM, YOKE BOSS SIZE: 2 13/16; TRAVEL: 1 1/8 INCH, BENCH SET: 10-15 PSIG, POSITIONER MODEL: DVC6200, INPUT SIGNAL: 4-20 MA DC, DIAGNOSTICS: PERFORMANCE DIAGNOSTICS, GAUGES: OUTPUT & SUPPLY (0-60 PSI), MOUNTING FOR: DVC6200, CERTIFICATION: FM, EXPLOSION PROOF/INTRINSIC SAFE/NON-INCENDIVE/DUST IGNITION, SUPPLY REGULATOR TYPE: 67CFSR, USE FOR JGTDSL SALES PIPELINE. QA: 13. | 1 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: PRESSURE RELIEF, P/N: NCLX-5L, MFGR: CASH VALVE, SET PRESS: 150 PSI, INLET SIZE: 3/4 IN, INLET CONN: 3/4 IN, OUTLET SIZE: 3/4 IN, BODY MATL: BRUSH, TEMP RATING: 210 F, USE FOR GAS WATER HEATER, NCLX-5L PRESSURE RELIEF VALVE FOR NATURAL GAS WATER HEATER TYPE-BT-100. QA: 00. | 5 |
| Mechanical | Valve | VALVE: TYPE PROPORTIONAL | VALVE: PROPORTIONAL 3 POS 4 WY , P/N: 107788GT, MFGR: GENIE, FOR GENIE MANLIFT, MODEL: SX-180, SERIAL NO: SX18015-206, ENGINE: DEUTZ, ENGINE MODEL: TD 2011 L041, ENGINE SERIAL NO: 11358866, NOMINAL POWER: 55KW, SPEED:2400 RPM, MANUFACTURER: GENIE, MODEL YEAR: 2015, EQUIPMENT TAG: BY-MLG-608 | 1 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, 1/4 IN, PRESSURE RELIEF VALVE (ITEM#D5), PART NUMBER: 923431020, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., QACode:17:Manu/Vend Maint Doc/ IOM, P&ID, MODEL NO:923431020 | 1 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, MODEL NUMBER: SS-4R3A-SETE, MFGR: SWAGELOK, TYPE: R SERIES PROPORTIONAL RELIEF VALVE, SET PRESSURE: 3000 PSIG, PRESSURE RANGE: 0 TO 6000 PSIG, MAXIMUM TEMPERATURE PRESSURE TATING: 250 DEG F AT 4910 PSIG /121 DEG C AT 338 BAR, ROOM TEMPERATURE PRESSURE TATING: 6000 PSIG AT 100 DEG F /413 BAR AT 20 DEG C, SERVICE CLASS: HIGH PRESSURE, SIZE: 1/4, VALVE MATERIALS: 316 SS, END CONNECTION SIZE(1X2): 1/4 IN, INLET CONN: SWAGELOK TUBE FITTING, PROCESS SERVICE: HYDRAULIC OIL, ORIFICE SIZE: 0.14 IN. (3.6 MM) FULLY OPEN ORIFICE, USED FOR WHCP MASTER VALVE & WINE VALVE HYDRAULIC LINE, QA: 08. | 6 |
| Mechanical | Valve | VALVE: SAFETY | VALVE: RELIEF, P/N: 45312M46/S1, SERIAL NO: 12-33322; MFGR: ANDERSON GREENWOOD, TYPE: PRESSURE, SET PRESS.:1350 PSI, INLET SIZE:4 IN, INLET CONN: FLANGE, OUTLET SIZE:6 IN, OUTLET CONN: FLANGE, DESIGN RATING:1230-1350 PSI, BODY MATL: CARBON STEEL, TRIM: SS,OPERATED:PRESSURE,TEMP RATING:105 TO 150 DEG F. CAPACITY: 102714 (SCFM ) USED IN PRODUCTION MANIFOLD, TAG NO: PSV-20101. | 1 |
| Mechanical | Valve | VALVE: RELIEF,TYPE LIQUID | VALVE: RELIEF, P/N: 8252BIAKVI-4PE, MFGR: CLMOT CONTROLS, GMOT CONTROLS, TYPE: OIL PRESSURE, TYPE: LIQUID, DESIGN RATING: 6000PSI, QA: 00 | 2 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, P/N: L5349T1-2PP-5500, MFGR: CIRCLE SEAL. QA: 00. | 2 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, P/N: MS-30/EX, MFGR; K-TEK, TYPE: PRESSURE, SIZE: INLET 1/4IN, BODY MATL: SS. QA: 00 | 1 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, P/N: SS-R4S8-SETC, MFGR: SWAGELOK, INLET/OUTLET CONN SIZE: 1/2 IN, SET PRESS: 750 TO 1500 Psig, SIZE: 1/4 IN, VALVE MATERIALS: 316 SS, SWAGELOK TUBE FITTING, PROCESS SERVICE: AIR, ORIFICE SIZE: 0.25 IN. (6.4 MM) FULLY OPEN ORIFICE, USED IN WELLHEAD CONTROL PANEL. QA: 21. | 5 |
| Mechanical | Valve | VALVE: RELIEF | VALVE: RELIEF, P/N: SS-RL4M8S8, MFGR: SWAGELOK, TYPE: SS HIGH-PRESSURE PROPORTIONAL RELIEF VALVE, INLET: 1/2 IN MNPT, OUTLET CONN SIZE: 3/8 IN TUBE, PRESSURE RANGE: 10-225 PSIG, 0.7-15 BAR, USED IN WELLHEAD CONTROL PANEL. QA: 11. | 1 |
| Mechanical | Valve | VALVE: RELIEF,TYPE PRESSURE | VALVE: RELIEF, P/N; WTN-8030, MFGR: SWAGELOK, OHC, TYPE: PRESSURE, BODY MATL: SS. QA: 00 | 3 |
| Mechanical | Valve | VALVE: RESTRICTION | VALVE: RESTRICTION, TYPE: PRIMING SUPPLY RESTRICTION VALVE (ITEM#8), PART NUMBER: 920201009, MANUFACTURER: TYCO, USE FOR DELUGE VALVE PACKAGE., MODEL NO:920201009 | 1 |
| Mechanical | Valve | VALVE: SAFETY | VALVE: SAFETY, TYPE: 27FA45-M20, MFGR: FARRIS ENGINEERING, SET PRESS: 5 PSIG, INLET SIZE: 1.5 IN, INLET CONN: MNPT, OUTLET SIZE: 2 IN, OUTLET CONN: FNPT, OHTO USA 03/05 SIZE AND ORIFICE: 1.5 F2 SET PRESSURE 5 PSIG BACK PRESSURE :0 PSIG CAPACITY 10% OVER PRESSURE: 127 SCFM TEMP: -20F TO 300 F. ASM BY FARRIS PRESSURE MGM, CANADA, USE FOR EG STEEL COLUMN SKID, FARRISS ENGINEERING DIV OF CURRIISS WRIGHT FCC BRECK SVILE, PSV-5601, JB-PSV-5601. QA: 02, 08, 17, 18. | 1 |
| Mechanical | Valve | VALVE: SAFETY | VALVE: SAFETY, TYPE: EG & METHANOL SIDE | 1 |
| Mechanical | Valve | VALVE: SAFETY | VALVE: SAFETY, TYPE: PRESSURE RELIEF, P/N: 26JA12A-120, MFGR: FARRIS Engineering (USA), SIZE: 3 IN X 4 IN 300X150 CLASS; MATERIAL: 316SS; S/N: PSV-300; STANDARD: SA-216 GR. WCB; QA: 02, 03, PO: 1264548-1, (FE CONSTRUCTION). | 2 |
| Mechanical | Valve | VALVE: SEAT | VALVE: SEAT, P/N: L2RF1S, MFGR: L&T VALVES LTD, SIZE: DN 150, CLASS: 150, CAT: L2RF1S, S. No.: 135233B5, 20 BAR AT 38C, 5 BAR AT220C, BODY: CF8M, STEM: SS316, BALL: SS, SEAT: RPTFE, DATE: 09/2015, | 1 |
| Mechanical | Valve | VALVE: SEAT | VALVE: SEAT, P/N: NA, MFGR: CAMERON WKM VALVES, DYNASEAL, SIZE: 4X4, CLASS: 900, S/N: 120569605 001, BM: 2365470-4511323, API: 6D, MOP: 2250 PSI AT -20 F, MOP: 2217 PSI AT 250 F, MODEL: 370D6 24YRF23, BODY: CS DBB, STEM: 316 607, BALL: SS, MIT: , SEAT: CS/NYL, LN: 6D-0244.2 SEAL:HNBR, ISO: , DOM: l 07/15 A2DT, 1 NOS OF VALVE | 1 |
| Mechanical | Valve | VALVE: SEAT | VALVE: SEAT, P/N: NA, MFGR: TY VALVE ITALY, TR2, DATE: 09/ 2013, SIZE: 3INCH, CLASS: 600RF, BALL: A182 F316, SEATS: A182 F316+ RPTFE, MOP: 102 BAR AT -29 DEG C, MOP: 92 BAR AT 120 DEG C, SERIAL NO. 130113005001, P.ORDER: 239452, TAG No.: L25JE3AF, 2 NOS OF VALVES. | 2 |
| Mechanical | Valve | VALVE:SOLENOID TYPE:DIRECT | VALVE: SOLENOID, NEW P/N (MODEL): SVP8108/NC/04/S/77A-24D/65, OLD P/N: 13-97HA9-24D-V-16, MFGR: BIFOLD FLUID POWER, TYPE: DIRECT ACTING SOLENOID VALVE, CONNECTIONS: BODY PORTED 1/4INCH NPT CONFIGURATION: 3-WAY 2-POSITION FLOW RATING: 8 LPM @ 10 BAR DP FLOW DIRECTION: FORWARD FLOW P TO S ONLY CONFIGURATION: NORMALLY CLOSED WORKING PRESSURE: 250 BAR O-RING MATERIAL: NITRILE -30°C TO +130°C SOLENOID: EX D SOLENOID APPROVAL: ATEX/IECEX DUAL CERTIFIED/LABELLED VOLTAGE: 24VDC OPTIONS: AUTO RESET POWER: 6.5 WATTS CABLE ENTRY: M20 X 1.5 CABLE ENTRY OPTION: STANDARD THREAD FORM: NPT PORTS HS CODE: 8481.20.9010, USE FOR SKID, BY-1 HIPPS VALVE PKG. BIFOLD FLUID POWER :SVP8108/NO/04/S-24VDC/97HA9, CERTIFICATE OF ORIGIN: UK. QA: 13 | 3 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N :107-2731, MFGR : CATERPILLAR, TYPE:VALVE GP.USE FOR GENERATOR AIR STARTING SOLENOID, GAS/DIESEL ENGINE- 3412/3516/3408. QA: 22.. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: 032F1212, MFGR: DANFOSS, TYPE: EVR6, SIZE: 3/8 IN, CONFIG: 2-WAY, PRESS RATING: 655 PSIG MAX, ADDTL DESC: SOLENOID VALVE, SOLDER, 3/8 IN ODF X 3/8 IN ODF, SWP: 500 PSIG, SUPPLIER NAME: KOLDTECH, SUPPLIER P/N: 132033, USE FOR WALK-IN FREEZER, MODEL: ZF11K4E-TFD-551, SL: 04B17773G. QA: 13. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: 73212SN2MN00NOC111C2, MFGR: PERKER HANIFIN, ELECTRICAL RATING: 24 V DC, WATTS: 10 WATT, ORIFICE: 1/4 IN, PRESSURE: 30- 2070 KPA OR 5-300 PSI, COIL: CLASS F, CONFIGURATION: 2 WAYS, PRESSURE RATING: 300 PSI, CONNECTION: NPT, OPERATION: NC. QA: 13. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: 8037211 , MODEL: VZS-2A52W/24V MFGR: EUGEN SEITZ AG, TYPE: 2A52W, ELECT RATING: 24 VDC, WATT: 17 WATTS, ADDI DESC: IP-65, VDC-24.W-17, PTB NO: EX-01-IEC 2132 X EXEMLLT4, PTB01 AJE X2129, USE FOR SKID, BY-1 HIPPS VALVE PKG. QA: 13. | 4 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: AEX 3206 1A-K9-A1158/1788/T4, MFGR: WANDFLUH HYDRAULIC, TYPE: POPPET VALVE, BODY MATL: 316S, CONN: 1/2 IN NPT F, ELECT RATING: WATTS: 17 WATT, USE FOR SKID, BY-1 HIPPS VALVE PKG. QA: 13. | 2 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: CSG-4512-LB-XX-397-D024, MFGR: VERSA, PRESS RATING: 85 PSI, FOUR WAY VERSA VALVES, | 64 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: EF8210G003-24VDC, S/N: T747818, MFGR: ASCO, TYPE: GENERAL SERVICE, PIPE SIZE: 3/4 IN, ORIFICE DIA: 3/4 IN, ELECT RATING: 24 VDC, 120VAC/60HZ, BODY MATL: BRASS, CONFIG: 2-WAY, OPERATION: NORMALY CLOSED, INSULATION CLASS: F, ENCLOSURE: EXPLOSIONPROOF & WATERTIGHT, SEAT MATL: NBR, COIL WATTAGE: 11.6 W, MAX OPD AIR: 125 PSI, ASCO ORDER CODE: 21865, SERIES: 8210, COIL CLASS: FT, COIL NUMBER: 238714-006-D, SOLENOID VALVE USE FOR DIESEL ENGINE FUEL LINE. QA: 07, 18. (I&E) | 1 |
| Mechanical | Valve | VALVE:SOLENOID | VALVE: SOLENOID, P/N: EF8320G202, MFGR: ASCO, TYPE: RED-HAT, PIPE SIZE: 1/4 IN, ORIFICE DIA: 3/32 IN, ELECT RATING: 24 VDC, BODY MATL: SS, CONFIG: 3 WAY, PRESS RATING: 115 PSI, CONN: NPT, OPERATION:NC, ENCLOSURE: WATERTIGHT, USE FOR FRICK-355 PROPANE COMPRESSOR. QA: 13. | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE: SOLENOID, P/N: QUAN 2- TSD-50, MFGR: DOMNICK HUNTER, TYPE: COIL, PIPE SIZE: 1/2 IN TIMED SOLENOID DRAIN, ELECT. RATING: 120 VAC SUPPLIED WITH STRAINER & 6 FT POWER CORD, PRESS RATING: 300 PSI-115V, ADDI DESC: REF:-MPR9649876, USED FOR INSTRUMENT AIR DRYER.QA: 01. | 1 |
| Mechanical | Valve | VALVE: | VALVE: STEER ASSY, P/N: 35/411700, MFGR: JCB, DOCUMENTATION: NONE PROVIDED, VENDER PROVIDED P/N: 35/411700, USE FOR JCB BRAND FORKLIFT (4 TON CAPACITY), P.I.N./MACHINE SERIAL NUMBER -0824970, V.I.N. SLP 940046E0824970, JCB MODEL NUMBER - 940RTFL.(ENGINE BRAND NAME - PERKINS (4 CYLINDER DIESEL ENGINE). ENGINE TYPE - 2158/2200, ENGINE FAMILY - 5PKXL04, 4RE 1, LIST: RE38061, ENGINE SERIAL NUMBER - U252823N, ENGINE POWER - 55.9KW, DISPLACEMENT - 4.400.), EQUPMENT NO.: BY-FJC-302 | 1 |
| Mechanical | Valve | VALVE: TYPE VALVE, DELIVERY | VALVE: TYPE VALVE, DELIVERY, P/N: 15221-51030, MFGR: KUBOTA, TYPE BUSHING, PISTON PIN. | 2 |
| Mechanical | Valve | VALVE | VALVE: VALVE: HYDRAULIC INTERFACE, P/N: FP15E-L2-04-32-V-02, MFGR: BIFOLD FLUID POWER, ADD DESC: TYPE: AIR LATCH PILOT VALVE 3 WAY NC, SIZE: 1/4 INCH, USED FOR WELHEAD JB-8 X-MAS TREE. QA: 13. | 3 |
| Mechanical | Valve | VALVE: WING | VALVE: WING, CLASS: 5000 PSIMSP, SIZE: 5-1/8 IN, MFGR: VETCOGRAY, 5000 PSIMSP, VG-300 FLANGE END, AA-1 TRIM, SERIAL NO: Ma 46010-01, USE FOR WELLHEAD. | 1 |
| Mechanical | Valve | VALVE:BALL, TYPE BALL | VALVE:BALL, P/N: B5U, MFGR: GROVE, BALL VALVE WITH ACTUATOR, MODEL: B5U, BODY TYPE: BALL (FULL BALL), BODY SIZE/ TRIM SIZE: 6 INCH/ 6IN, END CONN/ RATING: RF 600, BODY MATERIAL: CS, TRIM TYPE: BALL, PLUG/ BALL/ DISK MATERIAL: ELECTROLESS NIKEL PLATE 0.001, STEM ORIENTATION: TOP, BI-DIRECTIONAL SEAT RQT: YES, NACE COMPLIANT: NO, MEETS FIRE TEST PER API 607: NO, BODY BLEED VALVE REQUIRED: YES. BODY NAME PLATE DATA: G HOUSTON OPERATIONS DRESSER FLOW SOLUTIONS, DRESSER, INC. API 6D, DBB 6D-0001.4, SERIES: B5 RFXRF, SIZE: 6, CLASS: 600, BODY: A350 LF 2, MOP: 1290@350OF, 1480@ -20OF, DOM: 10/ 2005STEM: NI / CS, BALL/ GATE: NI / CS, SEAT: NI / CS, S/N: 05441431-2-3, API 6FA NACE, ISO 14313 INCH ACTUATOR DATA SHEET INFO: MANUFACTURER: BETTIS, MODEL: G1010-SR3, ACT MEDIUM FAILURE ACTION: CLOSED, TANK FOR 3 STROKE REQUIRED: NO, INLET TUBING LINE SIZE: 1/2 IN SPEED CONTROL MFR: NO, TIME REQUIRED TO CLOSE: 6 SECOND, HANDWHEEL ORIENTATION: NO, MANUAL OVERRIDE: NO, CASING BOLTING: STAINLESS STEEL, ACTUATOR MEDIUM: GAS SUPPLY, RIM PULL FORCE | 1 |
| Mechanical | Valve | VALVE:BALL, TYPE BALL VALVE | VALVE:BALL, TYPE BALL VALVE, P/N: TEG-VB 46, MFGR: NA/ UF, SIZE 3/4 IN, CLASS 1500. | 7 |
| Mechanical | Valve | VALVE:BALL, TYPE BALL VALVE | VALVE:BALL, TYPE BALL VALVE, P/N: TEG-VB 47N, MFGR: NA/ UF, SIZE 3/4 IN, CLASS SS316. | 10 |
| Mechanical | Valve | VALVE:BALL | VALVE:BALL,P/N:SS-43GM4-S4,MFGR:SWAGELOK,TYPE:MANUAL,SIZE:1/4 IN MNPT,DESIGN RATING:300 DEG F@2500 PSIG/148 DEG C@172 BAR 3000 PSIG@100 DEG F/206@BAR 37 DEG C,CONN:MNTP,BODY MATL:SS,TEMP RATING:37-148 DEG C,CONFIG:2-WAY,USED IN PANEL,WELLHEAD CONTROL, QA:00 | 4 |
| Mechanical | Valve | VALVE:BALL | VALVE:BALL,P/N:SS-4SKPS6, MFGR: SWAGELOK, TYPE: MANUAL, SIZE:3/8 IN, DESIGN RATING: UPTO 6000 PSIG, CONN: FNPT, BODY MATL: 316 SS,TRIM: SS, PORT: REDUCE, OPERATED: HANDLE, TEMP RATING:-40 TO 302 DEG F,CONFIG:2-WAY, USED WELLHEAD CONTROL PANEL, QA:00 | 2 |
| Mechanical | Valve | VALVE:BUTTERFLY, TYPE LUG | VALVE:BUTTERFLY, TYPE LUG, P/N: BX2L1811A1V0NZ, MFGR: DRUCO, DESIGN RATING 150 LB, CONN RF FLG, BODY MATL CS ASTM A216, TRIM 17-4/CS TR, OPERATED HANDLE, TEMP RATING -20 TO 150 DEG F, SOFTGOODS TEFLON, QUOTING: 4 DURCO BX2L1811A1V0NZ 150# CS HI PERF BF VLV LUG D:316 S:PFA ST:17-4 LL VENDOR: MCJUNKIN RED MAN CORP. MANUFACTURER: DURCO, QACode:00:NO DOCS REQD. RECPT INSP ONLY | 1 |
| Mechanical | Valve | VALVE:CONTROL | VALVE:CONTROL,P/N:20HM42,MFGR:SIGMA,TYPE:3-WAY,SET PRESS.:6000 PSI,INLET SIZE:1/4 IN,INLET CONN:FNPT,OUTLET SIZE:1/4 IN,OUTLET CONN:FNPT,CLASS:6000 LB,DESIGN RATING:6000 PSIG,BODY MATL:316 SS,TRIM:316 SS,OPERATED:PNEUMATIC,TEMP RATING:250 DEG F, USE IN PANEL, WELLHEAD CONTROL. | 1 |
| Mechanical | Valve | VALVE: EXHAUST | VALVE:EXHAUST VALVE: P/N:3287496 (Old P/N:111-4680), MFR: CATERPILLAR, ENGINE MODEL: G3606, SERIAL NO: 3XF00113, ARRANGEMENT NO:149-6196, POWER: 1666 HP/1242 KW, USED FOR CATERPILLAR ENGINE CYLINDER HEAD EXHAUST VALVE, FOLLOW 3XF113 PART BOOK, PAGE NO: 17, ITEM NO: 11 | 4 |
| Mechanical | Valve | VALVE: NEEDLE | VALVE:NEEDLE, P/N: H5VIS-2, MFGR: ANDERSON GREENWOOD,TYPE:MANUAL, SIZE: 1/4 IN X 1/4 IN, DESIGN RATING: UPTO 6000 PSIG, CONN:FNPT, ORIFICE DIA:0.135 IN, BODY MATL:SS, TRIM:SS, OPERATED:HANDLE, SOFT GOODS:TEFLON, USED IN WELLHEAD CONTROL PANEL, QA: 00 | 1 |
| Mechanical | Valve | VALVE | VALVE:NEEDLE, P/N: OKNV2, MFGR: WEKER ENGINEERING CO. BYPASS VALVE OR INSTRUMENT VALVE REPAIR KIT FOR GSS4 GAS SAMPLER. PRESERV:YES, REPAIR:YESSIZE AS PER MODEL, CLASS AS PER MODEL, DESIGN RATING AS PER MODEL, CONN AS PER MODEL, ORIFICE DIA AS PER MODEL, BODY MATL AS PER MODEL, TRIM AS PER MODEL, OPERATED AS PER MODEL, TEMP RATING AS PER MODEL, SOFTGOODS AS PER MODEL, STYLE AS PER MODEL | 6 |
| Mechanical | Valve | VALVE:PILOT | VALVE:PILOT,P/N:BIA-3309-302ES-S,MFGR:VERSA,TYPE:PNEUMATRIC,SIZE:3/8 IN X 1/2 IN(3-SIDE),DESIGN RATING:0-200 PSI,CONN:FNPT,BODY MATL:316 SS,TRIM:VITON,OPERATED:MANUAL,CONFIG:3-WAY,EXTRA DESC:RELAY VALVE, NC CYL, MATERIAL SPEC MEET NACE MR-01-75,USED IN PANEL,WELLHEAD CONTROL, QA:00 | 1 |
| Mechanical | Valve | VALVE:PILOT | VALVE:PILOT,P/N:BSP-3303-316,MFGR:VERSA PRODUCTS CO,TYPE:SPRING RETURN,SIZE:3.12 INX 1.25 IN X 1.25 IN,DESIGN RATING:MAX 200 PSIG,CONN:1/4 IN FNTP,BODY MATL:ALLUMINIUM ,SS AND NYLON,OPERATED:PILOT OPERATED,CONFIG:3 WAY,USE IN PANEL, WELLHEAD CONTROL. QA: 22. | 4 |
| Mechanical | Valve | VALVE:RELIF | VALVE:RELIEF,P/N:1905-00JC-2-CC-MS-31-RF-GS-HP,MFGR:CONSOLIDATED,TYPE:PRESSURE,SET PRESS.:150 PSI AT 60 DEG F,INLET SIZE:2 IN,INLET CONN:FLANGE,OUTLET SIZE:3 IN,OUTLET CONN:FLANGE,DESIGN RATING:80-285 PSIG,BODY MATL:CARBON STEEL,TRIM:SS,OPERATED:PRESSURE,TEMP RATING:-20 TO 1000 DEG F,USED IN VALVE, GLYCOL REGENERATION, QA:00 | 6 |
| Mechanical | Valve | VALVE:RELIEF | VALVE:RELIEF,P/N:1905DE-2-MS,MFGR:CONSOLIDATED,TYPE:SAFETY,SET PRESS.:150 PSI,INLET SIZE:1 IN,INLET CONN:FLANGE,OUTLET SIZE:2 IN ,OUTLET CONN:FLANGE,DESIGN RATING:274 PSI,BODY MATL:CS,TRIM:SS,OPERATED:150 PSI,TEMP RATING:-40 TO 150 DEG F,USE FOR VALVE, FUEL GAS SCRUBBER, QA:00 | 3 |
| Mechanical | Valve | VALVE:RELIEF | VALVE:RELIEF,P/N:1912-00DC-2-CC-DA-31-RF-GS-HP,MFGR:CONSOLIDATED,TYPE:SAFETY,SET PRESS.:1350 PSI,INLET SIZE:1 IN,INLET CONN:FLANGE,OUTLET SIZE:2 IN,OUTLET CONN:FLANGE,DESIGN RATING:1440 PSI,BODY MATL:CS,TRIM:SS,OPERATED:1350 PSI,TEMP RATING:-40 TO 150 DEG F,EXTRA DESC:MODEL NO: 1912-00DC-2-CC-DA-31-RF-GS-HP,USE FOR VALVE,GLYCOL CONTACTOR, QA:00 | 1 |
| Mechanical | Valve | VALVE:RELIEF | VALVE:RELIEF,P/N:1E2 JLT- JOS-E-15-J,MFGR:ANDERSON GREENWOOD,TYPE:SAFETY,SET PRESS.:270 PSIG,INLET SIZE:1 IN,INLET CONN:CL 150 FLANGE,OUTLET SIZE:2 IN,OUTLET CONN:CL 300 FLANGE,DESIGN RATING:15-6000 PSIG,ORIFICE:0.196 SQ. IN,BODY MATL:TITANIUM & DUPLEX SS & INCONEL,OPERATED:PRESSURE,TEMP RATING:-450 T0 1000 DEG F,EXTRA DESC:CAPACITY:94 GPM WATER AT 70 DEG F, BACK PRESSURE 5 PSIG,USE FOR VALVE, CONDENSATE SHIPPING, QA:00 | 1 |
| Mechanical | Valve | VALVE:RELIEF | VALVE:RELIEF,P/N:24312P46/S1,MFGR:ANDERSON GREENWOOD,TYPE:SAFETY,SET PRESS.:1350 PSIG,INLET SIZE:4 IN,INLET CONN:FLANGE,DESIGN RATING:5-6000 PSIG,TRIM:UVVV,OPERATED:PILOT,TEMP RATING:-400 TO 1000 DEG F,EXTRA DESC:SL:09-25047, CAPACITY:134425 SCFM AIR,USE FOR VALVE, SP WELL INLET MANIFOLD, QA:00 | 1 |
| Mechanical | Valve | VALVE:RELIEF | VALVE:RELIEF,P/N:9611013A,MFGR:ANDERSON GREENWOOD,TYPE:SAFETY,SET PRESS.:1415 PSIG,INLET SIZE:3/4 IN,INLET CONN:FLANGE,OUTLET SIZE:1 IN,OPERATED:PRESSURE,TEMP RATING:-450 T0 1000 DEG F,EXTRA DESC:CAPACITY:121 GPM WATER AT 70 DEG F, BACK PRESSURE 5 PSIG,USE FOR VALVE, CONDENSATE SHIPPING, QA:00 | 1 |
| Mechanical | Valve | VALVE:SAFETY, TRIM DISC | VALVE:SAFETY, TRIM DISC, TYPE PRESS. RELIEF VALVE | 1 |
| Mechanical | Valve | VALVE: SOLENOID | VALVE:SOLENOID, P/N: E5SM-3201-23-CD-5100-DO24, MFGR:VERSA, PIPE SIZE: 1/8 IN X 1/4 IN X 1/2 IN, ELECT RATING: 24 VDC, BODY MATL:SS, CONFIG: 3-WAY, PRESS RATING: 0-120 PSI, CONN:FNPT, OPERATION: NC, COIL: 1.8 W, ENCLOSURE: NEMA 1, 2 & 3, USE IN WELLHEAD CONTROL PANEL. | 1 |
| Mechanical | Valve | VALVE | VALVE-CHECK, P/N: 32725 USED ON GENIE MAN LIFT, MODEL: S65, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 | 4 |
| Mechanical | Valve | VALVE | VALVE-DO3 (INCLUDES INDEX NO'S 12 THROUGH 14), OLD P/N: 41763, NEW P/N: GY146160, USED ON GENIE MAN LIFT, MODEL: S65, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 | 2 |
| Mechanical | Valve | VALVE | VALVE-MINI SHUTTLE 2 POSITION 3 WAY P/N: 45483 USED ON GENIE MAN LIFT, MODEL: S65, MFGR: GEINE, SERIAL NO.: S60-7014, CAPACITY: 500LBS/227 KG, ENGINE MODEL: F4L 2011, ENGINE: DEUTZ, HORSE POWER: 41.8 KW/56 HP, ENGINE SERIAL NUMBER: 10471974, TAG NO: BY-MLG-604 | 1 |
| Mechanical | Valve | VALVE: INLET, | VAVLE: INLET, P/N: 4P-2854, MFGR CATERPILLAR, USE FOR COMPRESSOR, PROPANE UNIT, ENGINE MODEL 3606. | 1 |
| Mechanical | Valve | VALVE | VLV, MAN,3 POS/4 WAY, CLOSE CTR, P/N: 49768GT, MFGR: GENIE, MODEL: Z 45/25, SERIAL NUMBER: 16688, EQUIPMENT NAME: MANLIFT, ENGINE: DEUTZ, CAPACITY: 30KW, MODEL: F3L 1011, ENGINE SERIAL NUMBER: 00514883, RPM: 2800, EQUIPMENT TAG: BY-MLG-602. | 1 |
| Total= | 924 | |||
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Valves and Fittings sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.