Attention
This item is no longer available.Restaurant Equipment: Refrigerator, Walk-in-Cooler, Burners and More (55 Units)
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted restaurant equipment as part of a commercial repurposing strategy.
Attention
This item is no longer available.Restaurant Equipment: Refrigerator, Walk-in-Cooler, Burners and More (55 Units) Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted restaurant equipment as part of a commercial repurposing strategy.
| ID | : | 183046285 |
| Seller | : | |
| Seller Industry | : | |
| Quantity | : | 55 Units |
| Condition | : | Stored in containers. The equipment is in excellent shape. Please check the photos for a better understanding. |
| | : | |
| Product Location | : | |
| End Time | : | |
Item Description
This lot of Restaurant Equipment is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
| Item | Quantity | Description | Model Number | Specifications |
| Reach-In Refrigerator | 1 ea | Maxx Cold Select Series Upright Refrigerator, reach-in, one-section, 23 cu. ft. storage capacity | MXSR-23GD | - Hinged glass door with lock |
| - (3) wire shelves | ||||
| - Digital temperature controls with LED display | ||||
| - Automatic defrost | ||||
| - Polyurethane foam insulation | ||||
| - Stainless steel exterior | ||||
| - (4) 4" casters (2 with brakes) | ||||
| - Certifications: cETLus, ETL-Sanitation | ||||
| Reach-In Freezer | 1 ea | Maxx Cold Freezer, reach-in, one-section, 23 cu. ft., -10°F to 10°F temperature range | MCF-23FD | - (3) wire shelves |
| - Interior light, digital temperature control with LED display | ||||
| - Automatic defrost | ||||
| - Solid hinged door with recessed handle and lock | ||||
| - Open door alert | ||||
| - Stainless steel interior & exterior | ||||
| - (4) 4" swivel casters | ||||
| - Bottom mount self-contained refrigeration, R404A, 1/3 HP | ||||
| - Certifications: ETL-Sanitation, cETLus | ||||
| - Warranty: 3-year parts & on-site labor with additional 5-year compressor warranty | ||||
| Gas Floor Fryer | 2 ea | American Range Fryer, gas, full size, 35-50 lb. capacity | AF35/50 | - (7) baskets |
| - Thermostat control, millivolt pilot system | ||||
| - Stainless construction | ||||
| - 6" chrome plated adjustable legs | ||||
| - 35.0 kW, 120,000 BTU, ETL certified | ||||
| - Made in USA | ||||
| - Warranty: Standard one-year limited on parts & labor | ||||
| - LP Gas compatible | ||||
| - Specify elevation if over 2,000 ft | ||||
| Gas Countertop Griddle | 1 ea | Toastmaster Griddle, countertop, natural gas, 48" W x 21" D cooking surface | TMGM48 | - (4) steel radiants, 3/4" thick ultra-smooth polished steel plate |
| - (4) independent cooking zones | ||||
| - Manual controls | ||||
| - Front grease trough & chute | ||||
| - Side & rear splash guards | ||||
| - Pressure regulator, 4" nickel-plated steel legs | ||||
| - Stainless steel front panel, bullnose & removable drip tray | ||||
| - 80,000 BTU, cULus, UL EPH certified | ||||
| - Warranty: 1-year parts & labor (USA & Canada) | ||||
| Equipment Stand | 1 ea | Royal Industries Equipment Stand, 30" x 48", 900 lb capacity, front rolled edge, 3-sided riser with hemmed edge | ROY ES 3048 | - Stainless steel top |
| - Galvanized undershelf and legs | ||||
| - Bullet feet | ||||
| - NSF certified | ||||
| HD Range, 36", 6 Open Burners | 1 ea | American Range Heavy Duty Restaurant Range, gas, 36", (6) 32,000 BTU open burners | AR-6 | - Includes (1) rack, stainless steel front, sides & high shelf |
| - 6" chrome plated legs | ||||
| - 67.0 kW, 227,000 BTU | ||||
| - ETL-Sanitation, NSF certified | ||||
| - Made in USA | ||||
| - Warranty: 1-year limited on parts & labor | ||||
| - Specify gas type | ||||
| - Includes 26-1/2" standard oven | ||||
| Charbroiler, Gas, Countertop | 1 ea | American Range Charbroiler, gas, countertop, 36" wide, (6) burners | AERB-36 | - Reversible cast iron grates |
| - Manual controls | ||||
| - Removable radiant's | ||||
| - Full-width grease pan | ||||
| - Stainless steel front & sides | ||||
| - 26.0 kW, 90,000 BTU | ||||
| - ETL certified | ||||
| - Made in USA | ||||
| - Warranty: 1-year limited on parts & labor | ||||
| - LP Gas compatible | ||||
| Equipment Stand | 1 ea | Royal Industries Equipment Stand, 30" x 36", 800 lb capacity, front rolled edge, 3-sided riser with hemmed edge | ROY ES 3036 | - Stainless steel top |
| - Galvanized undershelf and legs | ||||
| - Bullet feet | ||||
| - NSF certified | ||||
| Steamer, Electric, Boilerless | 1 ea | Cleveland Range SteamChef® 3 Convection Steamer, electric, boilerless countertop, 1 compartment | 22CET3.1 | - 3 full-size pan capacity, SureCook controls |
| - 60-minute electro-mechanical timer & manual (continuous steaming) bypass switch | ||||
| - Left-hand hinged door | ||||
| - Automatic drain & water level controls | ||||
| - Stainless steel exterior, ENERGY STAR® certified | ||||
| - KleanShield™ interior, treated & tap water connection, 4" adjustable legs | ||||
| - 1-year parts & labor warranty, 3-year Convection Steamer Door Warranty | ||||
| - Performance start-up included at customer request (Free Water Quality Check included) | ||||
| - Equipment Stand (SPH) 208-240V/60/1-ph, UNISTAND34, URK Pan Rack Kit | ||||
| Convection Oven, Electric | 1 ea | American Range Convection Oven, double-deck, electric, bakery depth, manual controls | ME-2 | - Temperature range 150°F - 500°F |
| - 2-speed fan, porcelain liner, 50/50 solid doors | ||||
| - Stainless steel front, top & sides | ||||
| - 20.4 kW, ETL, NSF certified | ||||
| - Stacking kit with casters | ||||
| - Warranty: 1-year limited on parts & labor | ||||
| Serving Counter, Hot Food, Electric | 2 ea | Duke Manufacturing Aerohot™ Hot Food Station, electric, stainless steel with drains, valves, carving board | E303SW | - 44-3/8"W x 22-7/16"D x 34"H, 12" x 20" sealed hot food wells |
| - Stainless steel open base with undershelf, legs & feet | ||||
| - UL EPH Classified | ||||
| - 2250 watts, 18.8 amps, NEMA L5-30P | ||||
| Work Table, Stainless Steel Top | 6 ea | Royal Industries Work Table, 72"W x 30"D, bullnose edge, galvanized undershelf and legs, plastic feet, 18-gauge steel | ROY WT 3072 | - NSF certified |
| Drying Rack Unit | 1 ea | MetroMax iQ Mobile Drying Rack Unit, 4-tier | PR48VX3 | - 26"W x 50"L x 68"H |
| - Includes (2) drop-ins & (1) cutting board/tray drying rack | ||||
| - Built-in Microban® antimicrobial product protection | ||||
| (2) 5PCX swivel casters & (2) 5PCKB swivel casters with brakes, NSF certified | ||||
| Three (3) Compartment Sink | 1 ea | John Boos E-Series Sink, 3-compartment, stainless steel | E3S8-18-14T18-X | - 90"W x 23-1/2"D x 43-3/4"H overall size |
| - 3 compartments with left & right drainboards | ||||
| - 10"H boxed backsplash with 45° top and 2" return | ||||
| - Faucet holes, adjustable bullet feet, galvanized legs & gussets, NSF, CSA-Sanitation | ||||
| Pre-Rinse Faucet Assembly, with Add-On Faucet | 1 ea | Krowne Royal Series, pre-rinse Assembly, 38"H stainless steel assembly with 15" overhang | 17-109WL | - 1.2 GPM spray head, 2.0 GPM add-on faucet with 12" swing spout |
| - Includes wall bracket & mounting kit | ||||
| - Chrome plated brass base, low lead compliant, NSF (interchangeable with most brands) | ||||
| Dishwasher Table | 1 ea | Custom Dishwasher Table with Pre-washer, marine lip | DISHWASHER TABLE IN | - 36" ADS-C3, 34" tall, 9" backsplash, 3-inch marine lip |
| Dishwasher | 1 ea | Custom Low Temp Dishwasher | ADS-AF-3DS | - Utilizes soap, sanitizing, and rinse aid |
| - Adjustable depending on volume of load | ||||
| Dishwasher Table | 1 ea | Custom Dishwasher Table | DISHWASHER TABLE | - Standard model |
| Dishwasher Table - Post Wash | 1 ea | Custom Dishwasher Table with Post washer, 9" backsplash, 3-inch marine lip | ADS-C3 | - 36" ADS-C3, 34" tall |
| Nugget Ice Maker | 1 ea | Hoshizaki Serenity Ice Maker, Cubelet-Style, remote air-cooled | FS-1001MLH-C | - 30"W, stainless steel finish |
| - 830 lb/24hr production at 70°F | ||||
| - Advanced CleanCycle24™ | ||||
| - 115V/60/1-ph, 15.0 amps | ||||
| - R-404A refrigerant | ||||
| - Warranty: 3-year parts & labor, 5-year compressor | ||||
| Ice Machine Bin Top | 1 ea | Custom Stainless Bin Top to fit Serenity Ice Machine, feeds into coke & ice dispenser | Custom Stainless Bin Top | - Stainless Steel construction |
| Ice Machine Installation Labor | 1 ea | Installation labor for setting up and connecting ice machine | ICE MACHINE INSTALLATION LABOR | - Includes delivery, setup, and attachment of refrigeration lines |
| - Requires neutral line and 240V outlet | ||||
| Walk-In Cooler | 1 ea | Indoor Walk-In Cooler with air cooler | AIRCOOLER WALK IN COOLER | - Overall Size: 8'4" x 10'4" x 8'6" |
| - 4” thick foamed-in-place polyurethane panels, CFC free | ||||
| - Ceiling panel: 4” thick | ||||
| - 26 Ga Stucco embossed galvanized G-90 exterior | ||||
| Walk-In Cooler - Additional Details | - | Exterior: 26 Ga Stucco Embossed Galvanized G-90 | - | - Entrance Door Size: 36" x 78" (h), Flush Swing Door with Auto Self Closing, 3 Side Magnetic Gasket |
| - Accessories: Metal Cove Base, Silicone, Caulking, etc. | ||||
| Cooler Condenser | 1 ea | Condensing Unit, Cooler | MOH015X6ZCFM | - 1.5 HP, Outdoor Housing, Liquid Line Filter, Sight Glass, 208-230 Volt, 1 Phase |
| - Manufacture: Heatcraft, Hermetic Compressor (By Copeland), Refrigerant: R-404A | ||||
| Cooler Evaporator | 1 ea | Evaporator Fan Coil, Low Profile, Air Defrost | LCA6135AB | - Electrical: 115 Volt, 1 Phase, Includes Txv, Solenoid, T'Stat (Loose) |
| Cooler Installation Labor | 1 ea | Installation Labor to Unload, Set in Place, and Build Walk-In Cooler | INSTALLATION LABOR | - Includes unloading from trailer, setting in place, and building walk-in cooler |
| - Concrete leveling required to /- 1/16th inch | ||||
| Cooler Materials | 1 ea | Materials Needed for Cooler Installation, including unit, silicon, caulking, tubing, etc. | MATERIALS FOR INSTALLATION | - Includes nitrogen, copper tubing, freon, tubing insulation, light bulbs, etc. |
| Freezer | 1 ea | Indoor Walk-In Freezer, 10’F Box | WALK IN FREEZER | - Overall Size: 8’-4” x 10’-4” x 8’-6” (H) O.D. (With Sub Floor) |
| - 4 Wall Panel: 4” Thick Foamed In Place Class 1 Polyurethane (CFC Free), Rated At R-32 | ||||
| - 1 Ceiling Panel: 4” Thick Foamed In Place Class 1 Polyurethane (CFC Free), Rated At R-32 | ||||
| - Entrance Door Size: 36" x 78" (H), Flush Swing Door with Self Closing, Magnetic Gasket | ||||
| - Panel Finish: 26 Ga Stucco Embossed Galvanized G-90 | ||||
| - Includes: Metal Cove Base, Silicone, Caulking, etc. | ||||
| Freezer Condenser | 1 ea | Condensing Unit for Freezer | MOH015L6ZCF | - Horse Power: 2.5 HP, Outdoor Housing, Defrost Timer, Liquid Line Filter Drier, Sight Glass |
| - Manufacture: Heatcraft, Hermetic Compressor (By Copeland), Refrigerant: R-404A, Electrical: 208-230 Volt, 1 Phase | ||||
| Freezer Evaporator | 1 ea | Evaporator Fan Coil for Walk-In Cooler | LCA6139AB | - Low Profile Electric Defrost, PSC Motor, TXV, Solenoid, T’Stat (Loose) |
| - Electrical: 208-230 Volt, 1 Phase | ||||
| Freezer Installation Labor | 1 ea | Installation Labor to Set Up Walk-In Freezer | INSTALLATION LABOR | - Includes unloading, setting in place, and building freezer |
| - Concrete leveling required to /- 1/16th inch | ||||
| Freezer Installation Labor | 1 ea | Installation labor to unload from trailer, set in place, and build walk-in freezer. Concrete leveling required to /- 1/16th inch for proper sealing and insulation. | FREEZER INSTALLATION LABOR | The unit will be set up by licensed HVAC team with insulated copper lines. |
| Freezer Materials | 1 ea | Materials needed for installation of freezer, including silicon, skeed, copper tubing, nitrogen, tubing insulation, roof penetration boot, etc. | FREEZER INSTALLATION MATERIALS | Ensures secure and efficient installation of freezer unit. |
| Vent Hood | 1 ea | EconoAire Vent Hood 19 ft 6 inches Total, including (2) 9.75 ft sections. Insulated on top and rear for zero clearance. Light Package included. | ECONOAIR BY CAPTIVEAIRE | Provides ventilation for kitchen environment, plenum included. |
| Exhaust Fans | 2 ea | High Speed Direct Drive Centrifugal Upblast Exhaust Fan. Features speed control, disconnect switch, and 15 3/4” wheel. Handles 2438 CFM at 1.0” ESP. | EXHAUST FAN #1 & #2 | - Motor: 1.0 HP, 1 PH, 115V, 10.2 FLA Grease cup, Hige Kit, ECM wiring package. |
| Make Up Air | 1 ea | CaptiveAire Supply Air, untempered with 15’ blower in size #2 housing. Handles 3800 CFM at 0.500” WC ESP. | EA-A2-G15 | Motor: 1.5 HP, 1 PH, 115V, 13.6 FLA, Open Drip Proof, with down discharge air flow from right to left. |
| Roof Curbs | 3 ea | Custom Roof Curbs for Exhaust Fans and Supply Air, made according to the Roof Pitch of the Building. | CUSTOM ROOF CURBS | Curbs designed specifically for exhaust and supply air units, ensuring proper fitting based on roof structure. |
| Electrical Package | 1 ea | Electrical package for vent hood, pre-wired for lights and fan switches, with relays and contactors for selected fans. | ELECTRICAL PACKAGE | Provides the necessary electrical connections for efficient operation of the vent hood. |
| Fire Suppression System | 1 ea | Fire suppression system for the 19.5 ft hood, pre-wired without fire suppression piping. | FIRE SUPPRESSION | Ensures safe operation of the hood system by providing fire suppression capability. |
| Labor for Installation | 1 ea | Includes installation of Hood Unit with grease duct and plenum cut in-field, unistrut hanging, sealing with stainless steel flashing, and fitting for fire suppression and testing. | INSTALLATION LABOR | Complete labor for hood installation, including all ductwork and sealing to ensure efficiency and compliance with safety standards. |
| Materials | 1 ea | Dual Hood Installation Materials, including Unistrut, All thread, nuts, washers, welding supplies, grease ducts, black steel, metal ducts, duct aluminum tape, adhesives, grinding supply, silicone, screws, and additional necessary materials. | HOOD INSTALLATION MATERIALS | Comprehensive material package for installing two hoods (19 ft 6 in combined) in compliance with safety and operational requirements. |
| Travel Expenses | 1 ea | Travel expenses for three trips, including fuel and meals, from Odessa, TX to Pecos, TX. | TRAVEL TO PECOS | Covers travel expenses for installation, allowing for three trips between Odessa and Pecos for personnel and materials. |
| Stainless Steel Wall Cover | 1 ea | Stainless steel wall cover to complement kitchen installations, providing protection and easy maintenance. | ||
| Stainless Steel Wall Cover | 1 ea | Stainless steel wall cover behind hood. Includes stainless steel, adhesive, installation price, connector strips, and labor. | STAINLESS STEEL WALL COVER | Provides protective covering behind the kitchen hood, offering durability and ease of maintenance. |
| RO Water for Ice and Drinks | 1 ea | Reverse Osmosis System, 1000 gallons per day, with storage tank, Grundfos delivery pump, fittings, connections, float, brine wash softener, pex fittings, and installation. | REVERSE OSMOSIS SYSTEM | Designed for large-scale water purification, ensuring high-quality water supply for ice and drink needs in commercial settings. |
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing commercial equipment and restaurant equipment sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.