Attention
This item is no longer available.3000 HP DRILLMEC PCR-VFD Land Drilling Rig
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Land Rigs and Equipment as part of a commercial repurposing strategy.
Attention
This item is no longer available.3000 HP DRILLMEC PCR-VFD Land Drilling Rig Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Land Rigs and Equipment as part of a commercial repurposing strategy.
| ID | : | 183043967 |
| Seller | : | |
| Seller Industry | : | |
| Current Asking Price | : | $ 12,913,810 |
| Quantity | : | 1 Unit |
| Manufacturer | : | |
| Condition | : | Used Built in 2012 All the items are "as is, where is". Buyer is responsible for loading, freight and logistics to final destination. |
| | : | |
| Product Location | : | |
| End Time | : | |
Item Description
This Lot of 3000HP PCR-VFD DRILLMEC Land Rig is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
Details are listed below:
TECHNICAL INFORMATION
| Max. Load Considering Max. No. Of Lines Installed | ||
| Item | Description | Static Capacity |
| 1 | MAST, Static hook load | 1000 tons (2,000,000lbs) |
| 10 | With max. number of lines | 16 lines |
| 2 | CROWN BLOCK Rated load capacity | 1000 tons (2,000,000lbs) |
| 3 | TRAVELLING BLOCK Rated load capacity | 1000 tons (2,000,000lbs) |
| 4 | HOOK BLOCK Rated load capacity | 750 tons (1,500,000lbs) |
| 5 | SWIVEL Rated load capacity | 750 tons (1,500,000lbs) |
| 5a | TOP DRIVE Rated load capacity | 750 tons (1,500,000lbs) |
| 6 | RAKING PLATFORM Rated load capacity | 286 stands of 5 ½’’ DPs |
| 7 | SET BACK Rated load capacity | 500 tons (1,000,000lbs) |
| 8 | ROTARY TABLE Static load capacity | 650 tons (1,300,000lbs) |
| 10 | DRILLING LINE Breaking strength | 220,000lbs |
| 11 | DEAD LINE ANCHOR Line pull capacity | 150,000lbs |
| A. | Unit Specifications | |
| A.1 | Rig Data & Equipment List | |
| 1 | Rig name | SK801 |
| 2 | Rig Type | 3000HP PCR-VFD DRILLMEC land rig |
| 3 | Year built | 2012 |
| 4 | Rig nominal drilling capability | 5,000m-7,000m with 5’’ DP |
| 5 | Total truck trips required to move the rig between locations | About 80 trucks |
| 6 | Average fuel consumption in normal drilling operation | 9,000-10,000 liters/day |
| A.2 | Rig Storage Capacities | |
| A.2.1 | Diesel Fuel | |
| 1 | Diesel fuel total storage tank capacity | 120m3 capacity |
| 2 | Diesel fuel storage tanks quantity | 2 each |
| 3 | Diesel fuel storage tank capacity of each | 60m3 + 60 m3 |
| 4 | Diesel fuel transfer pumps | 2 each |
| 5 | Diesel fuel transfer pumps | Centrifugal pump - Explosion proof |
| A.2.2 | Drilling Water | |
| 1 | Drilling water total capacity | 160m3 |
| 2 | Drill water tanks quantity | 2 each (80m3 + 80m3) |
| 3 | Drill water transfer pump | 2 each |
| 4 | Drill water transfer pump | Centrifugal pump - Explosion proof |
| A.2.3 | Drilling Mud | |
| 1 | Liquid mud total capacity | 520m3 (3270bbls) total capacity |
| 2 | Liquid mud tank quantity | 7 each |
| B. | Power Supply System | |
| B.1 | Rig Power Plant | |
| B.1.1 | General | |
| 1 | Diesel Engine/Generator sets | 5 Sets |
| 2 | Make | Caterpillar 3512B DITA-SCAC |
| 3 | Continuous power of each set | 1600 HP (1200KW) maximum power |
| 4 | Total continuous power | 5 x 1600HP each maximum power |
| B.1.2 | Diesel Engine | |
| 1 | Diesel Engine quantity | 5 |
| 2 | Make & Type | CATERPILLER, CAT3512B DITA-SCAC |
| 3 | Diesel Engine mufflers with spark arrestor | Yes |
| B.1.3 | A.C. electric generators | |
| 1 | A.C. electric generators quantity | 5 Sets |
| 2 | Make & Type | USA, SR4B |
| 3 | A.C. Generator maximum power | 1900 KVA |
| 4 | A.C. Generator output voltage | 600VAC |
| 5 | A.C. Generator frequency | 50Hz |
| B.1.4 | Power control room-VFD | |
| 1 | Make | DRILLMEC |
| 2 | System description | The system will be designed to control five (5) diesel-electric generator sets in parallel, and ten (10) AC drilling motors |
| B.1.5 | Electrical Transformers | |
| 1 | Electric transformers quantity | 2 each (1 each for MCC 600/400V + 1 each for lighting 600/120 (208)V |
| 2 | Electric transformers Make | DRILLMEC |
| 3 | E. transformer output voltage | 600/400V |
| 4 | Electric transformer frequency | 50 Hz |
| B. 2 | POWER PLANT FOR THIRD PARTY | |
| B.2.1 | For Mud Logging Unit | |
| 1 | Power available | 100-200KVA as required |
| 2 | Output Voltage | 400 |
| 3 | Output Ampere | 100 |
| B.3 | ELECTRICAL LIGHTING SYSTEM | |
| B.3.1 | Fixed Lighting System | |
| 1 | Lighting around well location | 4 each lamps |
| 2 | Lighting around well location | Explosion proof |
| 3 | Lighting around shale shaker | 3 each lamps |
| 4 | Lighting around shale shaker | Explosion proof |
| 5 | Lighting on mud tanks | 12 each fluorescent lamps |
| 6 | Lighting on mud tanks | Explosion proof |
| 7 | Lighting around mud pumps | 3 each fluorescent lamps |
| 8 | Lighting around mud pumps | Explosion proof |
| 9 | Lighting around pipe rack | 2 each fluorescent lamps |
| 10 | Lighting around pipe rack | Explosion proof |
| 11 | Lighting on rig floor | 6 each fluorescent lamps |
| 12 | Lighting on rig floor | Explosion proof |
| 13 | Lighting along the mast | 20 each fluorescent lamps |
| 14 | Lighting along the mast | Explosion proof |
| 15 | Lighting on monkey board | 2 each fluorescent lamps |
| 16 | Lighting on monkey board | Explosion proof |
| B.4 | ELECTRICAL SAFETY DEVICE | |
| 1 | Emergency shutdown button for AC motors and generators | Yes |
| 2 | Emergency shutdown button location | Driller’s cabin, VFD house and engines |
| B.5 | A.C.EMERGENCY POWER GENERATOR | |
| B.5.1 | Diesel Engine/Generator | |
| 1 | Diesel Engine Make | CAT3406 or equivalent |
| 2 | Diesel Engine continuous power | 365KVA (390HP) |
| 3 | Diesel Engine mufflers with spark arrestor | Yes |
| 4 | A.C. Generator output voltage | 400V |
| 5 | A.C. Generator frequency | 50Hz |
| B.6 | RIG AIR SERVICE | |
| B.6.1 | Air Compressors | |
| 1 | Quantity | 2 Sets |
| 2 | Make-Type | Ingersoll Rand & Electric rotary screw air compressor |
| 3 | Driven by motor power | 45 HP |
| 4 | Max. flow rate capacity | 95 l/s |
| 5 | Max. service pressure | 9.8-10bar |
| B.6.2 | Air tanks | |
| 1 | Quantity | 2 each |
| 2 | Air vessel capacity of each | Total capacity is 2000L |
| 3 | Air vessel location | One at power house & One in substructure |
| B.6.3 | Air Dryer | |
| 1 | Make | DRILLMEC |
| 2 | Air Driers flow rate capacity | 95 l/s |
| 3 | Max. service pressure. | 9.8-10bar |
| C. | Hoisting & Rotating Equipment | |
| C.1 | Mast And Associated Equipment | |
| C.1.1 | Mast | |
| 1 | Make & Type | DRILLMEC & High raised floor beam leg cantilever mast, open face |
| 2 | Built as per API standard | API 4F |
| 3 | Clear height of Mast | 160ft |
| 4 | Max. lines on traveling block | 16 lines |
| 5 | Dimensions of top of mast | 2.5m / 2.2m |
| 6 | Dimensions of base of mast | Underside span is 30ft |
| 7 | Ladders with safety cages | Yes |
| 8 | Red lights on top of Mast | Yes |
| C.1.2 | Racking Platform | |
| 1 | Racking platform Make | DRILLMEC |
| 2 | Racking platform capacity of 5 ½’’ DPs | 286 Stands |
| 3 | Racking platform capacity x D.C range. | 12 Stands of 8 ¼’’ DC |
| 4 | Height from rig floor | From 85ft to 87ft |
| 5 | Racking platform suitable for DP range | 3 ½’’-5’’ DP-5 ½’’ DP |
| 6 | Racking platform suitable for DC range | 11”DC to 3-1/8”DC |
| C.1.3 | Casing Stabbing Board | |
| 1 | Casing Stabbing Board Make & Type | DRILLMEC & Pneumatic driven casing stabbing board |
| 2 | Stabbing Board adjustable range | From 30ft to 52ft |
| C.1.4 | Substructure | |
| 1 | Substructure Make-Type | DRILLMEC & Substructure is designed into two section, setback and drawwork section |
| 2 | Substructure built as per API standard | API 4F |
| 3 | API rated setback capacity | 500 tons (1,000,000lbs) |
| 4 | API rated rotary load capacity | 1000 tons (2,000,000lbs |
| 5 | API rated simultaneously load capacity of setback and rotary | 1500 tons (3,000,000lbs) |
| 6 | Rotary table static load capacity | 650 tons (1,300,000lbs) |
| C.1.5 | Rig Floor | |
| 1 | Rig floor dimensions | 48ft (14.6m) x 46ft (14.02m ) |
| 2 | Rig floor height from ground level | 40ft (12.19m) |
| 3 | Clear height between Rotary beams and ground level | 33ft (10.11m) |
| 4 | Rig floor drains collecting system | Drip pan under rotary table |
| 5 | Drains discharging to | Waste pit |
| C.1.6 | Dog House | |
| 1 | Dimensions L-W-H | 9m×2.8m×2.8m |
| C.1.7 | Crown Block | |
| 1 | Make and Type | DRILLMEC & Crown block skewed type |
| 2 | Built as per API standard | API 8C |
| 3 | Rated load capacity | 1000 tons (2,000,000lbs) |
| 4 | Sheaves number and outside diameter | 7+1 x 72’’ including the fast line sheave |
| 5 | Sheaves for O.D. wire line | 1 ¾’’ OD |
| C.1.8 | Traveling block | |
| 1 | Make and Type | DRILLMEC |
| 2 | Built as per API standard | API 8C |
| 3 | Rated load capacity | 1000 tons (2,000,000lbs) |
| 4 | Sheaves number and outside diameter | 8 x 72’’ |
| 5 | Sheaves for O.D. wire line | 1 ¾’’ OD |
| C.1.9 | Hook | |
| 1 | Make and Type | ABCO & Triplex type |
| 2 | Built as per API standard | API 8C |
| 3 | Rated load capacity | 750 tons (1,500,000lbs) |
| 4 | Complete with spring and locking device | Yes |
| C.1.10 | Swivel | |
| 1 | Make and Type | ABCO |
| 2 | Built as per API standard | API 8C |
| 3 | Static rated capacity | 750 tons (1,500,000lbs) |
| 4 | Rated working pressure | 7,500 PSI |
| 5 | Complete with access fitting for wire line | Yes |
| C.1.11 | Drawworks | |
| 1 | Make-Type | DRILLMEC & MAS 8000 AC |
| 2 | Rated input power | 3000 HP |
| 3 | Single or dual drum | Single drum |
| 4 | Drive | Driven by three (3) AC electric motors |
| 5 | Main drum brake Type | Disc brake & Disc brake c/w hydraulic power unit and Joystick type control |
| 6 | Fast line guide Make and Type | DRILLMEC |
| C.1.12 | Drawworks Auxiliary Brake | |
| 1 | Make- Type | Auxiliary brake Aker Wirth & Model WN 72 & Rated torque is 96,000lb·ft @ 50 rpm |
| C.1.13 | Drawworks safety Device | |
| 1 | Crown block safety device protection | Yes, Crown -O-matic |
| 2 | Additional Crown Block Safety device Protection | Yes, traveling Block upper limit Switch |
| C.1.14 | Drawworks Drilling Motors | |
| 1 | Quantity installed | 3 AC motors |
| 2 | Make and Type | General Electric & AC Electric motor GEB22 AC |
| 3 | Max output power | 1400HP each |
| C.1.15 | Dead Line Anchor | |
| 1 | Dead line anchor Make and Type | Wagner & HA150T |
| 2 | Built as per API standard | Yes |
| 3 | Rated load capacity | Line pull capacity is 150,000lbs |
| 4 | Sensor Type | Load sensor is E551 compression |
| 5 | Location | Rig floor- Off driller side |
| C.1.16 | Drilling Line | |
| 1 | Size and length | 1 ¾’’ x 7,500ft length |
| 2 | Breaking strength | 220,000lbs |
| 3 | Built as per API standard | EIPS 6 x 19 IWRC |
| C.1.17 | Automatic driller | |
| 1 | Make | DRILLMEC |
| 2 | Description | Automatic Drilling System is a modern, PLC based product, that help the driller operator, with an high level of safety , during the drilling operation & A precise control of the Auxiliary brake in order to automatically drill is based on weight on bit parameter (WOB) |
| C.2 | ROTATION SYSTEM | |
| C.2.1 | Top Drive assembly | |
| 1 | Make-Type | Tesco & 750-ESI-1350 Electric Top Drive System |
| 2 | Static load capacity | 750 tons (1,500,000lbs) |
| 3 | Maximum drilling torque | 72,000ft-lb |
| 4 | Maximum break torque | 100,000ft-lb |
| 5 | Maximum drilling speed | 218 RPM |
| 6 | Quill ID | 4" 7500psi |
| C.2.2 | Rotary table | |
| 1 | Make and Type | DRILLMEC |
| 2 | API Static load capacity | 650 tons (1,300,000lbs) |
| 3 | Maximum opening | 37-1/2” |
| 4 | Driven by Motor or drawworks | Independently driven by AC Motor |
| 5 | A.C. motor Make-Type | General Electric & AC Electric motor GEB22 AC |
| 6 | AC motor max. cont. output power | 1150HP |
| C.2.3 | Master Bushing | |
| 1 | Make | Drillmec |
| 2 | API Insert Bowl size | 2 3/8”-8 5/8”bushing (for drilling) 9 5/8”-10 3/4”bushing (for setting 9 5/8”casing) 11 3/8”-13 3/8”bushing (for running 13 3/8”casing) 20" bushing, (for running 20”casings) |
| C.2.4 | Kelly Bushing | |
| 1 | Make | Oilman |
| 2 | For Kelly shape and size | 5 ¼’’ Hexagonal kelly |
| C.2.5 | Rotary table antislipping pad | |
| 1 | Make | Oilman |
| C.3 | RIG FLOOR EQUIPMENT | |
| C.3.1 | Hydraulic cathead (Ezy-Torque) | |
| 1 | Make and type | Tillery & Parks & Air spinning and breakout catheads |
| 2 | Maximum rated pull | 20 tons |
| C.3.2 | Kelly Spinner | |
| 1 | Make | Integrated part of swivel |
| 2 | With reverse speed | Yes |
| C.3.3 | Wire Line Unit (Slick Line) | |
| 1 | Make and Type | Millenium |
| 3 | Complete with depth indicator | Yes |
| 3 | Wire line Diameter and length | 0.092’’ – 25,000ft |
| 4 | Wire Line breaking strength | About 120lbs |
| C.3.4 | Counterbalance system for manual tongs | |
| 1 | Installed | Yes, installed |
| 2 | Quantity | 2 |
| C.3.5 | Other rig Floor Equipment | |
| 1 | Mouse hole size | 9-5/8” |
| 2 | Mud saver bucket for OD drill pipes 3 ½’’, 5’’, 5 ½’’ | Yes, 1 each |
| C.4 | Utility Hoist Equipment | |
| C.4.1 | Rig Floor Hoist Winch | |
| 1 | Quantity | 2 each |
For more info please find the attached file.
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Land Rigs and Equipment sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.