Attention
This item is no longer available.Ball Valves & Gate Valves From 3/4" up to 12" (27 items)
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Valves and Fittings as part of a commercial repurposing strategy.
Attention
This item is no longer available.Ball Valves & Gate Valves From 3/4" up to 12" (27 items) Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Valves and Fittings as part of a commercial repurposing strategy.
| ID | : | 183021254 |
| Seller | : | |
| Seller Industry | : | |
| Quantity | : | 27 Items |
| Condition | : | Unused All the items are "as is, where is". Buyer is responsible for loading, freight and logistics to final destination. |
| | : | |
| Product Location | : | |
| End Time | : | |
Item Description
This Lot of 3/4" up to 12" Valves: Ball Valves & Gate Valves (27 items) is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
Details are listed below:
| Detailed Description | On Hand | Unit |
| 3" BALL VALVE, ASME CLASS 900, RTJ, REGULAR BORE, DESIGN PER ASME B16.34/API 6D, LF2 BODY MATERIAL, CARBON STEEL PLUS ELECTROLESSNICKEL PLATED BALL ( 75 MICRONS MIN. THICKNESS), 13%CR MATERIAL FOR STEM AND SEAT RINGS, PTFE SEATS, FIRE SAFE AS PER API 6FA, ANTI-STATIC DEVICE, PLUG AT VENT AND DRAIN LOCATIONS,VALVES SIZES 3" & SMALLER WITH WRENCHES, VALVES SIZE 4" & LARGER SHALL BE TRUNION BALL DESIGN, DOUBLE BLOCK AND BLEED, GEAR OPERATED. VALVES TO BE SUPPLIED WITH SECONDARY SEALING SYSTEM INJECTION FOR STEM & SEATS ON 4" AND LARGER VALVES.VALVES SHALL BE ANTI BLOW-OUT PROOF STEM, MAX OPERATING TEMPERATURE: 200 DEG C (FOR SOFT SEATS), BOLTING MATERIALS PER ASTM A193 GR.B7 / ASTM A194 GR. 2H, ALL BOLTS AND NUTS SHALL BE HOT-DIPPED GALVANIZED | 2 | EA |
| 8" BALL VALVE, ASME CLASS 150, RF, FULL BORE, 125-250 AARH SMOOTH FACING FINISH PER ASME B46.1, REQUIREMENTS TO ANSI B16.34/API 6D, STAINLESS STEEL PER ASTM A182-F316L BODY, BALL, STEM AND SEAT RINGS, PTFE SEATS INSERTS, FIRE SAFE AS PER API 6FA, ANTI-STATIC DEVICE, PLUG AT VENT AND DRAIN LOCATIONS, VALVES SIZES 3" & SMALLER WITH WRENCHES, VALVES SIZE 4" & LARGER SHALL BE TRUNION BALL DESIGN, DOUBLE BLOCK AND BLEED, GEAR OPERATED. VALVES TO BE SUPPLIED WITH SECONDARY SEALING INJECTION SYSTEM FOR STEM & SEATS ON 4"AND LARGER VALVES. VALVES SHALL BE ANTI BLOW-OUT PROOF STEM, OPERATING TEMPERATURE: -80/150 DEG C, BOLTING MATERIALS PER ASTM A193 GR.B8M / ASTM A194 GR. 8M, ALL BOLTS AND NUTS SHALL BE WITH ELECTROZINC PLATING PER ASTM A153 | 1 | EA |
| 12" BALL VALVE, ASME CLASS 1500, RTJ, REGULAR BORE, DESIGN PER ASME B16.34/API 6D, CARBON STEEL MATERIAL PER ASTM A352-LCB/A350-LF2 BODY AND BONNET, BALL, STEM & SEAT RINGS SHALL BE ELECTROLESS NICKEL PLATED (75 MICRONS MIN. THICKNESS), PTFE SEATS, FIRE SAFE AS PER API 6FA, ANTI-STATIC DEVICE, PLUG AT VENT AND DRAIN LOCATIONS. VALVES SIZES 3" & SMALLER WITH WRENCHES VALVES SIZE 4" & LARGER : SHALL BE TRUNION BALL DESIGN, DOUBLE BLOCK AND BLEED, GEAR OPERATED. VALVES TO BE SUPPLIED WITH SECONDARY SEALING SYSTEMINJECTION FOR STEM & SEATS, VENTS AND DRAIN FITTING. VALVES SHALL BE ANTI BLOW-OUT PROOF STEM. MAX. OPERATING TEMPERATURE: 200DEG. C BOLTING MATERIALS PER ASTM A320 GR.L7/ASTM A194 GR.7 ALL BOLTS AND NUTS SHALL BE HOT-DIPPED GALVANISED | 1 | EA |
| 3" CHECK VALVE, DUAL PLATE, WAFER LUG TYPE, TO BE INSTALLED BETWEEN ASME CLASS 900 RTJ FLANGE PER ASME B16.5, DESIGN AND TEST ACCORDING TO API 594/ASME B16.34, CARBON STEEL MATERIAL PER ASTM A216-WCB BODY, 13% CR TRIM, PLATES, PINS, BEARING AND SEATING SURFACES, HARD FACED SEATS (API TRIM NO. 8), INCONEL X-750 SPRINGS, MAX. OPERATING TEMPERATURE: 110 DEG C | 1 | EA |
| 10" CHECK VALVE, DUAL PLATE, WAFER LUG TYPE, TO BE INSTALLED BETWEEN ASME CLASS 1500 RTJ FLANGE PER ASME B16.5, DESIGN AND TEST ACCORDING TO API 594/ASME B16.34, CARBON STEEL MATERIAL PER ASTM A352 LCC/350 LF2 / STELLITE 6 (PLATES), TRIM, PLATES, PINS, BEARINGAND SEATING SURFACES, HARD FACED SEATS (API TRIM NO. 8), INCONEL X-750 SPRINGS.SUPPLIER TO PROVIDE PASS-THROUGH STUD BOLTS FOR EACH FLANGELESS VALVE TO SUIT CHECK VALVES INSTALLATION BETWEEN FLANGELESS OF THE SAME RATING, PLUS 20% STUD BOLTS SPARE QUANTITY.STUD BOLTS THREADED ENTIRE LENGTH IN ASTM A193 GR.B7, HEXAGONAL HEAVY TYPE NUTS IN A194 GR.2H, HOT-DIPPED GALVANIZED. | 2 | EA |
| 3/4" GATE VALVE, ASME CLASS 1500, SOCKETWELD ONE END THREADED NPT THE OTHER END, SOLID WEDGE, OS&Y, BOLTED BONNET, INTEGRAL WELDEDSEATS, CARBON STEEL MATERIAL PER ASTM A105 BODY AND BONNET, 13%CR TRIM, HARD FACED SEATS (API TRIM NO.8), IN COMPLIANCE WITH API602, CORROSION INHIBITED DIE-FORMED, FLEXIBLE GRAPHITE PACKING WITH BRAIDED TOP & BOTTOM ANTI-EXTRUSION RINGS, HANDWHEEL OPERATOR,BOLTING PER ASTM A193-B7/A194-2H, HOT-DIPPED GALVANIZED | 8 | EA |
| 3" GATE VALVE, ASME CLASS 900, FLANGED, RTJ, PER ASME B16.5, FLEXIBLE WEDGE, FULL PORT, RENEWABLE SEATS, OS&Y, BOLTED BONNET, IN COMPLIANCE WITH API 600, CARBON STEEL MATERIAL PER ASTM A216-WCB BODY AND BONNET, 13% CR TRIM, HARD FACED SEATS (API TRIM NO. 8), CORROSION INHIBITED DIE-FORMED, FLEXIBLE GRAPHITE PACKING WITH BRAIDED TOP & BOTTOM ANTI-EXTRUSION RINGS, GEAR OPERATOR FOR VALVESSIZE 8" & LARGER SIZES, MAX. OPERATING TEMPERATURE: 110 OC, BOLTING MATERIALS PER ASTM A193 GR.B7 / ASTM A194 GR. 2H, HOT-DIPPED GALVANIZED | 2 | EA |
| 3/4" GATE VALVE, 1500#, SW X NPT, A105N/ F316 | 10 | EA |
|
| |
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Valves and Fittings sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.