Attention
No longer available.OCTG Accessories (Pup Joints, X-Overs, O-Rings, Bushing & More)
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted OCTG Accessories as part of a commercial repurposing strategy.
Attention
No longer available.OCTG Accessories (Pup Joints, X-Overs, O-Rings, Bushing & More) Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted OCTG Accessories as part of a commercial repurposing strategy.
| ID | : | 182995276 |
| Seller | : | |
| Seller Industry | : | |
| Quantity | : | 1 Lot |
| Condition | : | This is unused, surplus material. The buyer is responsible for loading, freight and logistics to final destination. |
| | : | |
| Product Location | : | |
| End Time | : | |
| Trader | Rashid Ishaq 1-832-426-3779. |
Item Description
This units of Pup Joint, X-Over, O-Ring, Bushing & More is no longer needed for company's own operation and is being sold as an asset liquidation for it's owner.
Details are listed below:
| Description | Manufacture | UOM | Qty |
| 13-5/8'' Coupling, 88.2ppf ,Q-125-T1, VAM TOP-NA | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 8 |
| 11-3/4" CSG Assembly,ICCS,Vam FJL 65 Lbs/Ft,P-110/Q-125,Bow Spring, For 14-1/2" To 14-3/4" | Halliburton | EA | 12 |
| Wear bushing, Type SG-5, 18-3/4'' x 9-5/8'' | Vetco | EA | 2 |
| Wear bushing, Type SG-5, 18-3/4'' x 13-3/8'' | Vetco | EA | 2 |
| 9-5/8" Davis M&F Float collar, double valves, type 700DV-X-PVTS, P110, 53.5 ppf, VAM SLIJ II, Anti-rotation, to be compatible with SLB Deepsea EXPRES plugs(for subsea plug system only) | Slb-Dowel | EA | 1 |
| LANDING COLLAR LFC TYPE I 9.625 IN 53.50 LB/FT VAM SLIJ II BOX UP 9.625 IN 53.50 LB/FT VAM SLIJ II PIN DOWN 9.855 IN OD 8.535 IN ID BMS-P110 Q125 | Baker Oil Tool | EA | 1 |
| FLOAT COLLAR API RP 10F-IIIC APPROVED DOUBLE VALVE 9.625 IN 53.50 LB/FT VAM SLIJ II BOX UP 9.625 IN 53.50 LB/FT VAM SLIJ II PIN DOWN TOP-CO P/N: TYPE 525 CEMENT FILLED 125 KSI MYS W/BALL DEFLECTOR | Baker Oil Tool | EA | 1 |
| FLOAT SHOE API RP 10F-IIIC APPROVED CEMENT FILLED SINGLE VALVE 9.625 IN 53.50 LB/FT VAM SLIJ II BOX UP TOP-CO TYPE 526 125 KSI MYS W/SIDE PORTS W/BALL DEFLECTOR W/ALUMINUM BLADED NOSE | Baker Oil Tool | EA | 1 |
| 5" CSG stop collar, slip-on | Halliburton | EA | 80 |
| 5'' Float collar, 18ppf, VAM FJL Box x Pin w/ball deflector, TOP-CO | Baker Oil Tool | EA | 2 |
| 5'' Float shoe, 18ppf, VAM FJL Box w/aluminium bladed nose, down jets w ball deflector, TOP-CO | Baker Oil Tool | EA | 2 |
| 5'' Landing collar, 18ppf, VAM FJL Box x Pin | Baker Oil Tool | EA | 2 |
| 7'' Float collar, 29ppf, JFE Bear Box c/w ball catcher installed | Baker Oil Tool | EA | 1 |
| 7'' Float shoe, 29ppf, JFE Bear Box c/w ball catcher installed | Baker Oil Tool | EA | 1 |
| 7'' Landing collar, 29ppf, JFE Bear Box x pin | Baker Oil Tool | EA | 1 |
| 11-3/4" XO 65# Q125 VAM FJL Pin x ABST-L Pin (Conversion from item # 11200032A) | Viet Tube | JT | 2 |
| 13-3/8'' SSR Plug set with Top and Bottom darts | Slb-Dowel | EA | 1 |
| 9-5/8'' SSR Plug set with Top and Bottom darts | Slb-Dowel | EA | 1 |
| 20" Float shoe, double poppet type valve (1700psi back pressure rating), Round nose c/w down jet ports, high flow area with flow durability of 10bpm for 24hrs, 400 degF rat | Weatherford | EA | 1 |
| 7" Coupling, API 5CT, 32ppf,Q-125-T1-RY, VAM TOP-HC | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 7 |
| 13-5/8'' blank coupling, 88.2ppf ,Q-125-T1 | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 2 |
| Nominal Seat Protector, Type SG-5, 18-3/4'' | Vetco | EA | 2 |
| 13 5/8" CSG x 17 1/2" Hole, Hinged Non-weld, Rigid Positive Bow, Centralizer | Halliburton | EA | 22 |
| Shaker Screen, PMD 500 DF-A200 | DERRICK SOLUTIONS | PC | 64 |
| Shaker Screen, PMD 500 DF-A40 | DERRICK SOLUTIONS | PC | 6 |
| Shaker Screen, PMD 500 DF-A100 | DERRICK SOLUTIONS | PC | 12 |
| Shaker Screen, PMD 500 DF-A270 | DERRICK SOLUTIONS | PC | 36 |
| Shaker Screen, PMD 500 DF-A20 | DERRICK SOLUTIONS | PC | 12 |
| Shaker Screen, PMD 500 DF-A230 | DERRICK SOLUTIONS | PC | 84 |
| Shaker Screen, PMD 500 DF-A170 | DERRICK SOLUTIONS | PC | 2 |
| Gasket VX, 18.75"-10,000 psi MSP, Stainless steel with Hy-Car Inserts, SG-5 | Vetco | EA | 1 |
| 11-3/4" Lifting Nubbin, 65#, VAM FJL Material AISI 4145H MOD DWG: MISC 11 PH 028-3 Ver.: 02 | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 3 |
| 11-3/4" Lifting Nubbin, 65# Vam FJL pin AISI 4140Q+T material 45 Deg taper with 0.5' cut | Viet Tube | EA | 2 |
| 9-5/8" Lifting Nubbin, 53.5#, Vam SLJ II pin AISI 4145 MOD material 45 Deg taper with 0.5' cut | Viet Tube | EA | 5 |
| 7" Spiz-O-Lizer centralizer | Slb-Dowel | EA | 5 |
| 20" CSG x 24" Hole, Hinged Welded, Bow Spring, Centralizer | Halliburton | EA | 9 |
| 16" x 13-5/8" CSG centralizer, Hinged Welded, Bow Spring, w/spiral nails | Halliburton | EA | 25 |
| 13 5/8" CSG x 17 1/2" Hole, Hinged Welded, Bow Spring, Centralizer | Halliburton | EA | 19 |
| 20" CSG, Hinged Spiral Nail, Stop Collar | Halliburton | EA | 19 |
| 7" Stop Collar, DPA, Spir-O-Lok | Slb-Dowel | EA | 10 |
| 7" Bow Centralizer, DPA | Slb-Dowel | EA | 1 |
| 5" DP centralizer, bow spring through 30" conductor, hinged | Weatherford | EA | 1 |
| 5" DP centralizer, bow spring through 20" casing, hinged | Weatherford | EA | 1 |
| 7" Solid Spiral centralizer | Slb-Dowel | EA | 25 |
| 5-7/8" x 5" CSG centralizer, bow spring, slip-on | Halliburton | EA | 40 |
| 8-1/2" x 7" CSG centralizer, bow spring, hinged | Halliburton | EA | 80 |
| 12-1/4" x 9-5/8" CSG centralizer, bow spring, slip on type, Centek | Halliburton | EA | 30 |
| 12-1/4" x 9-5/8" CSG centralizer, bow spring, hinged | Halliburton | EA | 11 |
| FLOAT COLLAR API RP 10F-IIIC APPROVED SINGLE VALVE W/ORIFICE 7.000 IN 32.00 LB/FT VAM TOP HC BOX UP 7.000 IN 32.00 LB/FT VAM TOP HC PIN DOWN TOP-CO P/N: TYPE 525 CEMENT FILLED 125 KSI MYS W/BALL DEFLECTOR | Baker Oil Tool | EA | 1 |
| LANDING COLLAR TYPE I 11.750 IN 65.00 LB/FT VAM FJL BOX UP 11.750 IN 65.00 LB/FT VAM FJL PIN DOWN 11.853 IN OD 10.682 IN ID (MUST DRIFT 10.625) 125 KSI MYS (API 5CT) | Baker Oil Tool | EA | 1 |
| COLLAR 10.000 IN 73.90 LB/FT VAM TOP NB BOX UP 9.875 IN 62.80 LB/FT VAM SLIJ II BOX DOWN BMS-P110 Q125 CR-MO TBLR 125 MYS BCS-A099 SURFACE TREATMENT 11.114 IN OD 8.615 IN ID (MUST DRIFT 8.500) 24.00 IN LG CRITICAL C1 CRITICAL TO HSE DRW: 787-269-25.1 | Baker Oil Tool | EA | 2 |
| SOLO PLUG LANDING COLLAR TYPE 1 7.000 IN 32.00 LB/FT VAM TOP HC BOX UP 7.000 IN 32.00 LB/FT VAM TOP HC PIN DOWN 7.762 IN OD 6.005 IN ID 125 KSI MYS DRW: G01-225-07.1 | Baker Oil Tool | EA | 1 |
| CROSSOVER BUSHING 9.875 IN 62.80 LB/FT VAM SLIJ II BOX UP 9.625 IN 53.50 LB/FT VAM SLIJ II PIN DOWN BMS-P110 Q125 CR-MO TBLR 125 MYS BCS-A099 SURFACE TREATMENT 10.151 IN OD 8.559 IN ID (MUST DRIFT 8.500) 24.00 IN LG CRITICAL | Baker Oil Tool | EA | 2 |
| 9-5/8" CSG stop collar, slip-on | Halliburton | EA | 69 |
| Shear Tab Tool for 20" RL-4S | Vetco | EA | 1 |
| Oil State Shear Tab Tool | Oil States | EA | 2 |
| Seal Unit EXT (4ft), 6.00" X 5-1/2" #20.00 Vamtop Box X Pin. | Halliburton | EA | 3 |
| Muleshoe GID, 7" 32# Vam Top box, P110, 10K psi | Halliburton | EA | 3 |
| Re-dress Kit for running tools | Halliburton | EA | 1 |
| Muleshoe GID, 7" 32# Vam Top box, P110, 10K psi, MN#102173105 | Halliburton | EA | 1 |
| 7" CSG stop collar, hinged | Halliburton | EA | 80 |
| Premium Seal Unit, 6.000in. Seal Bore ID-Min, P110 Matl, Aflas/Teflon/Ryton Seal Matl, 5-1/2-20 Vam Top box x pin, 10Kpsi | Halliburton | EA | 18 |
| GID, Tube, HS, TWS, 7 7/8-10 UNS-2B, 9 5/8 | Halliburton | EA | 3 |
| GID, Tube, TWS, 7 7/8-10 UNS-2B, 9 5/8, 47-53 | Halliburton | EA | 2 |
| MS-1 Annulus Seal, MS-700, 18.750 15000 WP, Nace, fit for 13-5/8' Casing hangerstell, PSL 2-4, 15.000 PSI WP, 35 DEG F to 350 Deg F | Vetco | EA | 4 |
| PKR, 9-5/8, 53.5, 6.000, 7-32.00 VAMTOP Pin, Q125MY, HNBR, 10K psi, 350F | Halliburton | EA | 3 |
| PKR, 9-5/8, 53.5, 6.000, 7-32.00 VAMTOP Pin, Q125MY, HNBR, 10K psi, 350F, MN # 102171282 | Halliburton | EA | 1 |
| Cement Retainer/Bridge Plug complete with running tools (mechanical setting tool and wireline setting kit) for 13-5/8" casing, 88.2ppf (12.25"SD),ID range: 12.175” to 12.715” A125, 9AA, 90HD | Slb-Dowel | EA | 1 |
| Cement Retainer/ Bridge Plug complete with runnig tools (mechanical sett and wireline setting kit) for 7" CSG, 32ppf, Q125-T1-RY, 3AA, 90HD), ID range: 6.004” to 6.538” | Slb-Dowel | EA | 4 |
| Plug, Bridge, MMB, 9.94" OD, 11-3/4" 60-83.0#, Mechanical set | Slb-Dowel | EA | 1 |
| Cement Retainer/Bridge Plug complete with running tools (mechanical setting tool and wireline setting kit) for 9-5/8" CSG, 53.5ppf (8.5" SD), ID range: 8.435” to 9.063”Q125-T1-RY, 6A | Slb-Dowel | EA | 2 |
| 13-5/8” COUPLINGS, 88.2PPF, P110, VAM TOP | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 8 |
| 9-5/8" Coupling VAM TOP, 53.5ppf | SUMITOMO | EA | 1 |
| SG-TPR Emergency annulus seal pacl =off, elastomeric seal for 18-3/4" universal casing hanger, 15,000 PSI, for 13-3/8", 9-5/8" and 7". SG-TPR annulus seal/pack off, rated for 35 to 250 GEG F | Vetco | EA | 2 |
| XO 5" 18#, Vam Top box x Vam FJL pin, 20" length, AISI4140-L80 material | N/A | EA | 1 |
| 5" Lifting Plug, 18#, VAM SJL Pin AISI 4145 material | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 3 |
| Halliburton Reducing adapter, 3-1/2" 15.8# PH6 box x 5-1/2" 20# Vam Top pin, P110 | Halliburton | EA | 3 |
| Halliburton Reducing adapter, 5-1/2" 20# Vam Top box x 2-7/8" EUE pin, P110, 10K psi | Halliburton | EA | 3 |
| No-Go Seal Unit Locator, 6.000 in. Seal Bore ID-Min, 5-1/2-20.00 VAMTOP Box x Pin, 6.60 in. Max OD, 4.758 in. Min ID, 28.88 in. Length, P110, 10Kpsi | Halliburton | EA | 3 |
| 9-5/8" Slip on Cetralizer-Non welded (9-5/8" x 12-1/4" expand-O-lizer SS) | Slb-Dowel | EA | 10 |
| Centralizer Splider II Tur 9-5/8" x 12-1/4" Hole, Centex # 0958-1214TUR | Halliburton | EA | 25 |
| 7" Slip-on set screw | Slb-Dowel | EA | 47 |
| 9-5/8" Stop collar, DPA | Slb-Dowel | EA | 18 |
| 9 5/8" CSG, Slip on 5mm plate with bevel edge, Centek stop Collar | Halliburton | EA | 8 |
| Solid Stop Collar 9-5/8" with set Screws, Centek # 0958-00SO | Halliburton | EA | 8 |
| Wear bushing, Type MS-700, 18-3/4'' x 10" | Vetco | EA | 1 |
| Wear bushing, Type MS-700, 18-3/4'' x 10" | Vetco | EA | 1 |
| Wear bushing, Type MS-700, 18-3/4'' x 7" | Vetco | EA | 2 |
| 13-3/8'' Rigid centralizer with nails | Slb-Dowel | SET | 6 |
| 4-1/2'' Bow Centralizer, WF, A1 | Schlumberger | SET | 20 |
| 4-1/2'' Stop Collar, WF, JSH Latch - On | Schlumberger | SET | 20 |
| 13-3/8'' Bow centralizer, DL | Slb-Dowel | SET | 40 |
| 9-5/8'' Stop collar | Slb-Dowel | EA | 3 |
| 7'' Bow centralizer | Slb-Dowel | EA | 1 |
| 7'' Rigid centralizer | Slb-Dowel | EA | 1 |
| 7'' Stop collar | Slb-Dowel | EA | 2 |
| 9-5/8'' Rigid centralizer with nails | Slb-Dowel | EA | 5 |
| 20'' Bow centralizer, DL, with pins | Slb-Dowel | EA | 22 |
| 20'' Stop collar with nuts | Slb-Dowel | EA | 6 |
| 20'' Rigid centralizer, with nails | Slb-Dowel | EA | 4 |
| Wear bushing, Type MS-700, 18-3/4'' x 13-5/8'' Reduced Bore w/ Min ID 12.28" | Vetco | EA | 1 |
| Wear bushing, Type MS-700, 18-3/4'' x 13-5/8'' Reduced Bore w/ Min ID 12.28" | Vetco | EA | 1 |
| 10" Coupling, 73.9 ppf, SMC-110, VAM TOP NB | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 13 |
| Nominal Seat Protector, Type MS-700, 18-3/4''Reduced Bore W/ Min ID 17.58 | Vetco | EA | 1 |
| Nominal Seat Protector, Type MS-700, 18-3/4''Reduced Bore W/ Min ID 17.58(Used) | Vetco | EA | 1 |
| 18-3/4"x13-5/8"Casing Hanger, Type MC-700, 10,000 PSI, 13.625, 88.2PPF vam top pin, 17SQ inches (minimum) AISI 8630(120KSI),SD 12.25" (conversion from item # 11100030A) | Vetco | EA | 1 |
| 18-3/4" x 10" Casing hanger , MS-700, 15000 PSI MSP, 10.00", 73.9 PPF vam top NB bottom Box down, 17SQ inches (minimum), AISI 8630 (85KSI) | Vetco | EA | 1 |
| 18-3/4" x 7" casing hanger, MS-700, w. special extension; 7" 35.PPF TSH-3SB Box MTM; 11,500 PSI MWP | Vetco | EA | 2 |
| Sealbore EXT, 6.00 x 20FT, 7-32# Vam Top box x pin, Q125,10K psi | Halliburton | EA | 3 |
| Sealbore EXT, 6.00 x 20FT, 7-32# Vam Top box x pin, Q125,10K psi, MN#102171301 | Halliburton | EA | 1 |
| Sealbore EXT, 6.00 x 15FT, 7-32# Vam Top box x pin, Q125,10K psi | Halliburton | EA | 3 |
| Seal Unit EXT (20ft), 6.00" X 240, 5-1/2" #20.00 Vamtop Box X Pin. | Halliburton | EA | 3 |
| 80-40 SEAL BORE EXTENSION 5.500 IN 32.60 LB/FT VAM SLIJ II PIN UP 5.500 IN 32.60 LB/FT VAM SLIJ II PIN DOWN 5.555 IN OD 4.000 IN ID 480.00 IN LG BMS-A099 41XX OR L80 STEEL 80 MYS NACE 15,000 PSI WORKING PRESSURE C1 CRITICAL TO HSE (2EA of 40ft long) | Baker Oil Tool | EA | 2 |
| LINER PACKER ZXP ULTRA W/HOLD DOWN SLIPS 7.000 IN 32.00 LB/FT VAM TOP HC BOX DOWN 09.625 IN 47.0-53.5 LB/FT CSG 09.625 IN 58.4 LB/FT CSG 8.250 IN EXT OD 7.375 IN EXT ID 20.00 FT EXT LG TYPE PBR EXT 8.350 IN OD 6.059 IN ID (MUST DRIFT 6.000) 6.100 IN PKOFF | Baker Oil Tool | EA | 1 |
| LINER PACKER W/HRD-E PROFILE AND HOLD DOWN ZXP HRD-E & RS PROFILE 7.000 IN 32.00 LB/FT VAM TOP HT BOX DOWN 09.625 IN 47.0-53.5 LB/FT CSG 09.875 IN 62.8 LB/FT CSG 8.250 IN EXT OD 7.375 IN EXT ID 20.00 | Baker Oil Tool | EA | 1 |
| SEAL ASSEMBLY BULLET 7.000 IN 32.00 LB/FT VAM TOP HC BOX UP 20.00 FT EXT LG 7.375 IN SEAL OD .177 CROSS SECTION SEALS BULLET SEAL 10,000 PSI SEAL RATING 400 DEGF WK TEMPERATURE 3 SEALS 8.250 IN OD 6.059 IN ID (MUST DRIFT 6.000) 1/2 MULE SHOE GUIDE BMS-P11 | Baker Oil Tool | EA | 2 |
| SEAL ASSEMBLY BULLET 9.875 IN 62.80 LB/FT VAM SLIJ II PIN UP 20.00 FT EXT LG 10.188 IN SEAL OD .177 CROSS SECTION SEALS BULLET SEAL 12,500 PSI SEAL RATING 500 DEGF WK TEMPERATURE 4 SEALS 9.959 IN OD 8.559 IN ID (MUST DRIFT 8.525) FLUSH ID ROUND NOSE GUIDE | Baker Oil Tool | EA | 2 |
| SEAL ASSEMBLY BULLET 11.750 IN 65.00 LB/FT ATLAS BRADFORD ST-L BOX UP 20.00 FT EXT LG 11.500 IN SEAL OD .177 CROSS SECTION SEALS BULLET SEAL 10,000 PSI SEAL RATING 400 DEGF WK TEMPERATURE 3 SEALS 12.130 IN OD 10.667 IN ID (MUST DRIFT 10.625 IN) FLUSH ID H | Baker Oil Tool | EA | 1 |
| LINER HANGER PACKER INLINE W/RH RH & RS PROFILE 11.750 IN 65.00 LB/FT ATLAS BRADFORD ST-L BOX DOWN 13.625 IN 88.2 LB/FT CSG 12.130 IN EXT OD 11.500 IN EXT ID 20.00 FT EXT LG TYPE PBR EXT 12.130 IN OD 10.686 IN ID (MUST DRIFT 10.656) 10.686 IN PKOFF DIA 1, | Baker Oil Tool | EA | 1 |
| LINER PACKER ZXP ULTRA RH & RS PROFILE W/HOLD DOWN SLIPS 9.875 IN 62.80 LB/FT VAM SLIJ II BOX DOWN 13.375 IN 68.0-72.0 LB/FT CSG 13.625 IN 88.2 LB/FT CSG 11.940 IN EXT OD 10.188 IN EXT ID 20.00 FT EXT LG TYPE PBR EXT 12.100 IN OD 8.535 IN ID (MUST DRIFT 8 | Baker Oil Tool | EA | 1 |
| LINER PACKER ZXP ULTRA RH & RS PROFILE W/HOLD DOWN SLIPS 9.875 IN 62.80 LB/FT VAM SLIJ II BOX DOWN 13.375 IN 68.0-72.0 LB/FT CSG 13.625 IN 88.2 LB/FT CSG 11.940 IN EXT OD 10.188 IN EXT ID 20.00 FT EXT LG TYPE PBR EXT 12.100 IN OD 8.535 IN ID (MUST DRIFT 8 | Baker Oil Tool | EA | 1 |
| LINER HANGER FLEX-LOCK IV HYDRAULIC ASSEMBLY ROT W/NLHR 7.000 IN 32.00 LB/FT VAM TOP HT PIN UP 7.000 IN 32.00 LB/FT VAM TOP HT PIN DOWN 09.625 IN 40.0-53.5 LB/FT CSG 8.334 IN OD 6.074 IN ID (MUST DRIF | Baker Oil Tool | EA | 1 |
| LINER HANGER MECHANICAL ASSEMBLY FLEX III ROT W/NLHR RH JL JAY 9.875 IN 62.80 LB/FT VAM SLIJ II PIN UP 9.875 IN 62.80 LB/FT VAM SLIJ II PIN DOWN 13.375 IN 54.5-72.0 LB/FT CSG 13.625 IN 88.2 LB/FT CSG 14.000 IN 114.0 LB/FT CSG 12.140 IN OD 8.535 IN ID (MUS | Baker Oil Tool | EA | 1 |
| Tool-FVDS, Hangoff Tool | Vetco | EA | 1 |
| 30" VIV Clamp (refurbish) | NUSTAR TECHNOLOGIES | SET | 16 |
| 30" x 1" Float shoe (loose by cut-off) | PVD Trading and Technical Services Joint Stock Company | JT | 1 |
| 30" x 1.5"OD, API 5L x 56 Float Shoe, Davis Lynch Double valve float shoe | Slb-Dowel | EA | 1 |
| 20" x 0.75" Float shoe, Non tag in, Double float valve (loose from cut off) | PVD Trading and Technical Services Joint Stock Company | JT | 1 |
| 20" x 0.812" WT (169#) API 5L X56 LEOPARD SD 80KSI PIN connector | Oil States | EA | 2 |
| 20", RL-4S pin connector (part of item # 10120002A) | Vetco | EA | 1 |
| 20" x 0.75"OD, 154#, API 5L X56, Leopard SDDS pin connector, 0.75" | PVD Trading and Technical Services Joint Stock Company | EA | 1 |
| 30" X-52, SAW, 1''WT, RL-4 box connector | Vetco | EA | 1 |
| 30" X-52, SAW, 1''WT, RL-4 pin connector (loose by cut-off) | Vetco | JT | 2 |
| X-Over 8-1/2''OD, 3''ID, 6-5/8'' Reg Box x 6-5/8'' FH Pin | N/A | EA | 1 |
| X-Over 8-1/2''OD, 3''ID, 6-5/8'' Reg Box x 6-5/8'' Reg Pin | N/A | EA | 1 |
| Saver sub 7-5/8'' Reg Pin x 6-5/8'' FH Pin | N/A | EA | 1 |
| XO Sub 7" OD x 2-13/16" ID, NC50 Pin c/w: SRG, DS55 Box | N/A | EA | 1 |
| Stab in stinger, API 4-1/2" IF box connection top, c/w: one set of orings and one back up set | Weatherford | EA | 1 |
| O-Ring for 18-3/4" NSP, MS-700 | Vetco | EA | 4 |
| Polypak Seal for Wear Bushing, MS-700 | Vetco | EA | 10 |
| Oring for 30" ST-2 connection | Vetco | EA | 2 |
| Oring for 20" ALT-2 connection | Vetco | EA | 2 |
| O-ring for 20" RL-4S Box connector, PN:201706-5 | Vetco | EA | 99 |
| O-ring for 30" ALT-2 | Vetco | EA | 4 |
| O-ring for 20" x 0.812" Leopard SD connector pin | Oil States | EA | 7 |
| O-ring for 20" x 0.812" Leopard SD connector box | Oil States | EA | 10 |
| Thread lock compound, weld A | Halliburton | EA | 9 |
| DP Wiper ball 7", wiping range 5.50" to 2.38" | Slb-Dowel | EA | 2 |
| 7" Foam ball | Halliburton | EA | 3 |
| 2.250 IN BRASS SETTING BALL BMS-K114 FREE-CUTTING AND FORGING BRASS NON CRITICAL | Baker Oil Tool | EA | 2 |
| 2.250 IN BRASS SETTING BALL BMS-K114 FREE-CUTTING AND FORGING BRASS NON CRITICAL | Baker Oil Tool | EA | 2 |
| PUMP DOWN PLUG DOUBLE SEAL F/SOLO PLUG5.130 IN OD 2.280 IN PDP NOSE OD F/5.000 IN MAX CSG ID F/2.440 IN MIN CSG ID 4 FINS NITRILE SEAL W/PHENOLIC INSERT W/LATCH | Baker Oil Tool | EA | 1 |
| LINER WIPER PLUG SYSTEM COMPOSITE SOLO 07.000 IN 17.0-38.0 LB/FT CSG 6.625 IN OD 2.067 IN ID 2.280 IN PDP NOSE OD NITRILE SEAL | Baker Oil Tool | EA | 1 |
| LINER WIPER PLUG SYSTEM LFC 09.625 IN ALL WEIGHTS CSG 1.640 IN ID 1.844 & 2.280 IN PDP NOSE OD W/CERAMIC INSERT NITRILE SEAL W/ALUM CORE PDP HIGH PRESSURE | Baker Oil Tool | EA | 1 |
| LINER WIPER PLUG SOLO 11.750 IN 42.0-87.2 LB/FT CSG F/11.232 IN MAX CSG ID F/10.111 IN MIN CSG ID 11.260 IN OD 2.310 IN ID 2.480 IN PDP NOSE OD NITRILE SEAL 300 DEGF WK TEMPERATURE 5,000 PSI SEAL RATING | Baker Oil Tool | EA | 1 |
| PUMP DOWN PLUG DOUBLE SEAL 5.130 IN OD 2.490 IN PDP NOSE OD F/5.000 IN MAX CSG ID F/2.625 IN MIN CSG ID NITRILE SEAL | Baker Oil Tool | EA | 1 |
| LINER WIPER PLUG SYSTEM LFC 07.000 IN 17.0-38.0 LB/FT CSG F/6.538 IN MAX CSG ID F/5.801 IN MIN CSG ID 6.625 IN OD 1.640 IN ID 1.844 & 2.280 IN PDP NOSE OD W/CERAMIC INSERT NITRILE SEAL 300 DEGF WK TE | Baker Oil Tool | EA | 1 |
| 1.500 IN BRASS SETTING BALL BMS-K114 FREE-CUTTING AND FORGING BRASS NON CRITICAL | Baker Oil Tool | EA | 1 |
| V-PKG, 5.998X5.502X0.19, ESS5-2 | Halliburton | EA | 36 |
| V-PKG, 6.018X5.490X0.19, ESS6-2 | Halliburton | EA | 36 |
| V-PKG, 6.064X5.460X0.190, ESS13 | Halliburton | EA | 36 |
| FEM ADPTR, 5.990X5.506X0.620 | Halliburton | EA | 12 |
| MALE FEM PKG ADPTR, 5.990X5.506 | Halliburton | EA | 24 |
| RTNR W, 0.125X14.375 | Halliburton | EA | 6 |
| 9-5/8" Cementing wiper plug set, Halliburton, compatible with #10140057A | Halliburton | EA | 1 |
| 13-5/8" CMTG Wiper plug set, surface CMTG plug system Top & Bottom, 8,000psi bump pressure rating and 400deg F rating, Unit-rotation feature in conjunction with 13-5/8" float collar, easy drillable by | Downhole Product | EA | 1 |
| Latch down drill pipe wiper plug, drill pipe size 5.0" to 3.5", tolatch in Weatherford 20" float shoe, 350 degF temp rating | Weatherford | EA | 1 |
| Guide base, permanent, 6FT radius, W/ 4 Regan post top, remote retrievable, W split support plate, grouting funnel, W/ 2 slope indicator | Vetco | SET | 1 |
| Remote Retrievable Permanent Guide Base,Unit is remotely retrieved via Running Tool. NS has 46 ID Center Ring w/J-slot, 6FT Guide line radius, 4ea Lifting eye installed 2ea Mounting bracket for slope indicator,Regan post top, 2ea Grounting funnel, Split l | Vetco | SET | 1 |
| Remote Retrievable Permanent Guide Base,Unit is remotely retrieved via Running Tool. NS has 46 ID Center Ring w/J-slot, 6FT Guide line radius, 4ea Lifting eye installed 2ea Mounting bracket for slope indicator,Regan post top, 2ea Grounting funnel, Split l | Vetco | SET | 1 |
| 30" conductor, intermediate joint, 1.5"WT (456#) API 5L X56 Merlin HDEFSL 100KSI pin (up) x box (down) R3 (13.7m), c/w one elevator ring, elastomer, thread protectors(recovered, damaged box) | Oil States | JT | 1 |
| 30" conductor, intermediate joint, 1.5"WT (456#) API 5L X56 Merlin HDEFSL 100KSI pin (up) x box (down) R3 (13.7m), c/w one elevator ring, elastomer, thread protectors(refurbish) | Oil States | JT | 8 |
| 30" x 1.5"OD, 456#, API 5L x 56 intermediate Joint, Lynx HD 100KSI Pin (up) x Box (down), Range 3 1 elevator ring each; 1 set of oring Seal and lip Seal to be installed; 4EA of antirotation key | Oil States | JT | 5 |
| 30" conductor, intermediate joint, 1.5"WT (456#) API 5L X56 Merlin HDEFSL 100KSI pin (up) x box (down) R3 (13.7m), c/w one elevator ring, elastomer, thread protectors | Oil States | JT | 5 |
| Wellhead housing 18-3/4''x0.75wall, MS-700, profile for 13-5/8"x10"x7"Casing Hanger ,15,000 PSI WP , H-4 Connector Pin Profile,and 20" 0.75 API 5L-56 RL-4S Pin(95KSI)Down extension joint' ,A Locking Meckanism which preloads the 18-3/4 Well Head Housing i | Vetco | EA | 1 |
| 30" x 1.5"OD, 456#, API 5L x 56 intermediate Joint, Lynx HD 100KSI Pin (up) x butt-weld, Range 3 1 elevator ring each; 1 set of oring Seal and lip Seal to be installed; 4EA of antirotation key | Oil States | JT | 1 |
| 30" x 1.5"OD, 456#, API 5L x 56 XO Joint, ALT-2 Pin(Up)xLynx HD Box (down), (100psi)Range 3 1 elevator ring each; 1 set of oring Seal and lip Seal. | Vetco | JT | 1 |
| 30”XO Joint, 30” OD x 1” WT, API GR 5L X-52 SAW, RL-4 BOX x Merlin HDEFSL Pin, R3, (converted from item # 10350008A & 10110002A) | PVD Trading and Technical Services Joint Stock Company | JT | 1 |
| Wellhead Housing Unit, MS-700, 30" x 1.5" wal length : R3 in which consist of 1) PN H5720-2- 30" Wellhead housing. 30.000 x 1.5 wall, MS700, external profile fit for well completion, 28 square inch (Max) flow by area.ning tool, capacity to access 30 | Vetco | EA | 1 |
| 13-5/8” Float shoe joint, double valves, P-110, 88.2 #, 12.25”SD, VAM TOP box, R3 (combine item # 10130027A & 10300054A) | Slb-Dowel | JT | 1 |
| 13-5/8” Float collar joint, Anti-rotation Sleeve, type 700-X-PVTS, P-110, 88.2 #, 12.25”SD, VAM TOP box x pin, R3 (combine item # 10130018A, 10130025A, 10300059A)(for subsea plug system only) | Slb-Dowel | EA | 1 |
| 13-5/8" Float collar joint, single poppet type valve (7,500psi back pressure rating), 800gpm for 24hrs high flow valve, 8,000psi bump pressure rating and flow area 4.45sq.in, easy drillable by PDC/tri | N/A | JT | 1 |
| 13-5/8” Float reamer shoe (Pen-o-trator) joint, double poppet type valve (10,000psi back pressure rating), 800gpm for 24hrs high flow valve, 400 degF rating, eccentric nose c/w down jet ports, easy d | N/A | JT | 1 |
| 13-5/8" Pup joint, 88.2#,Q-125,Vam Top, SD 12.25" , 6M (combine 2items # 10130010A & 10300051A) | Viet Tube | JT | 1 |
| 13-5/8" Pup joint, 3m, 13-5/8”, 88.2PPF, P110, VAM TOP | Viet Tube | JT | 3 |
| 13-5/8" Pup joint, 2m, 13-5/8”, 88.2PPF, P110, VAM TOP | Viet Tube | JT | 1 |
| 13-5/8" Pup joint, 4m, 13-5/8”, 88.2PPF, P110, VAM TOP | Viet Tube | JT | 1 |
| 5'' Perforated casing, N80Q, 18ppf, VAM FJL,R3 | N/A | EA | 8 |
| 7" X-Over joint, 35#,TN-110SS,TSH 3SB box x Vam Top pin, SMLS,R3 | N/A | JT | 2 |
| 7" casing thread bakerlok, 35#,TN-110SS,TSH 3SB PIN x BOX, SMLS,R3 (Converted from item # 10150012A) | N/A | JT | 5 |
| XO 7" 32#, Q125-T1-RY, TSH-3SB pin x Vam Top HC box, R3 (fabrication from item # 10150018A & 10300043A) | N/A | EA | 2 |
| 7" XO, 35#,TN-110SS,TSH 3SB PIN x PIN, SMLS, R3 (Converted from item # 10150012A) | N/A | JT | 2 |
| 7" Float shoe joint, API RP 10F-IIIC SINGLE VALVE, P/N: TYPE 966 (HFX) CEMENT FILLED 110 KSI MYS W/DOWN JETS W/AULUMINUM ECCENTRIC NOSE W/BALL DEFLECTOR, 35#,TN-110SS,TSH 3SB BOX, SMLS,R3 (Converted | N/A | JT | 1 |
| 7" Float collar joint, API RP 10F-IIIC SINGLE VALVE, TENARISHYDRIL 3SB PIN DOWN TOP-CO, P/N: TYPE 966 (HFX) CEMENT FILLED 110 KSI MYS W/DOWN JETS, 35#,TN-110SS,TSH 3SB BOX, SMLS,R3 (Converted from it | N/A | JT | 1 |
| 7" Landing collar joint, API RP 10F-IIIC SINGLE VALVE, TENARISHYDRIL 3SB PIN DOWN TOP-CO, 7.650 IN OD 6.012 IN ID BMS-P110 Q125 CR-MO TBLR 125 MYS 125 KSI MYS (API 5CT), 35#,TN-110SS,TSH 3SB BOX, SML | N/A | JT | 1 |
| 7" X-Over, 35#,TN-110SS,TSH 3SB pin x Vam Top HC box (coupling 32#) 1.0m, (fabrication from item # 10150012A & 10300043A) | N/A | JT | 2 |
| 7" pup joint, 35#,TN-110SS,TSH 3SB pin x box, 1.0m, (fabrication from item # 10150012A) | N/A | JT | 2 |
| 7" pup joint, 35#,TN-110SS,TSH 3SB pin x box, 2.0m, (fabrication from item # 10150012A) | N/A | JT | 2 |
| 7" pup joint, 35#,TN-110SS,TSH 3SB pin x box, 4.0m, (fabrication from item # 10150012A) | N/A | JT | 1 |
| 7" pup joint, 35#,TN-110SS,TSH 3SB pin x box, 6.0m, (fabrication from item # 10150012A) | N/A | JT | 1 |
| 13-3/8'' Float Collar Joint, P110, 68ppf, BTC, R3 (float equipment is out-of-date) | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 1 |
| 13-3/8'' Float Shoe, P110 Joint, 68ppf, BTC, R3 (float equipment is out-of-date) | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 1 |
| 20'' Shoe joint, X-56, ERW, 0.65''WT, RL-4S Box x Floatshoe, R3 - VETCO | Vetco | JTS | 1 |
| X-Over 9-5/8", 53.5ppf, SM110ES, VAM SLIJ II box x VAM TOP pin (Damaged Pin), R3 | Viet Tube | EA | 1 |
| 9-5/8'' Float Shoe Joint, P110, 53.5ppf, JFE Bear (float equipment is out-of-date) | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 1 |
| 9-5/8'' Float Collar Joint, P110, 53.5ppf, JFE Bear (float equipment is out-of-date) | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 6.2 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 5.8 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 4.2 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 3.8 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 2.2 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 1.8 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| 10'' Pup Joint, API 5 CT, 73.9 ppf, SMC-110, VAM TOP NB,SD, 8.5''', SMLS, 0.8 meters | NIPPON STEEL & SUMITOMO METAL Corporation | JT | 1 |
| XO Sub, Q-125-T1-RY, SMLS, 1 meter (10'', 73.9 ppf, VAM TOP NV Box x 9-5/8",53,3ppf, VAM SLIJ Pin) | NIPPON STEEL & SUMITOMO METAL Corporation | EA | 1 |
| 9-5/8'' Pup joint, P110, 53.5ppf, JF Bear, 6 metre | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 2 |
| 9-5/8" Pup Joint, NT80HE, 47ppf, BTC, 4,5M | N/A | JTS | 2 |
| 9-5/8" Pup Joint, NT80HE, 47ppf, BTC, 3M | N/A | JTS | 2 |
| 9-5/8'' Pup joint, P110, 53.5ppf, JF Bear, 3 metre | NIPPON STEEL & SUMITOMO METAL Corporation | JTS | 2 |
| 9-5/8” XO, Vam SLIJ-II Pin x Vam Top Box, 53.5PPF, P110, 8.5" SD, SMLS, R3 | Viet Tube | JT | 1 |
| 9-5/8" Float Collar Joint, 4-1/4 SUPER SEAL II VALVE WITH HIGHSTRENGTH 24 TOOTH NR PLUG SEAT, VAM SLIJ-II 53.5 LBS/FT, P-110/Q-125, Halliburton, compatible with wiper plug set #10300080A, (combine ite | N/A | JT | 1 |
| 9-5/8" Float Eccentric Shoe Joint, DOUBLE AUTO-FILL 4-1/4 SUPER SEAL II VALVE, WITH TAPERED OFFSET COMPOSITE NOSE, DOWN-JET, VAM SLIJ-II 53.5 LBS/FT, P-110/Q-125, Halliburton,(combine item # 10140052A | N/A | JT | 1 |
| 9-5/8”, PUP JOINT, 3M, 53.5PPF, SM-110ES, VAM SLIJ-II | Viet Tube | JT | 1 |
| 9-5/8” pup joint, 1M 53.5PPF, SM-110ES, VAM SLIJ-II | Viet Tube | JT | 3 |
| XO 7" 32#, Q125-T1-RY, JFE BEAR pin x Vam Top box, 6M (fabrication from item # 10150007B & 10300043A) | N/A | EA | 2 |
| Web Sling: SWL 5 tons; 8 meters Length; 125cm wide; Soft eye at both ends; Factor 6:1; Korean; Year of Manufacture: 2014; C/w: CO/ CQ | Lghth | 44 | |
| 30'' 1.5" WT cut off pipe | Oil States | EA | 1 |
| 20" x 0.812" WT (169#) API 5L X56 cut off casing | Oil States | EA | 1 |
| 13-5/8” cut off casing, 88.2PPF, P110, 12.25" SD, VAM TOP | Viet Tube | EA | 2 |
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and OCTG Accessories sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.