$5.2B Global Marketplace for Asset Recovery & Surplus Inventory

    Attention

    This item is no longer available.

    Line Items Pipe, Flanges, Valves, Wires, Gaslets, Connectors Etc. (12800 Line Items)

    Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Drilling Equipment as part of a commercial repurposing strategy.

    1. Oil and Gas
    2. Drilling Equipment
  • Line Items Pipe, Flanges, Valves, Wires, Gaslets, Connectors Etc. (12800 Line Items)
  • 182994622_590508

    • Attention

    This item is no longer available.
    1. All Listings
    2. Drilling Equipment
    3. Oil and Gas

    Line Items Pipe, Flanges, Valves, Wires, Gaslets, Connectors Etc. (12800 Line Items) Share with Buyers

    • ‌
    • ‌

    Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Drilling Equipment as part of a commercial repurposing strategy.

    ID:182994622
    Seller:‌
    Seller Industry:‌
    Original Wholesale Value:
    $21,000,000
    Quantity:12800 Items
    Manufacturer:

    Sulzer View more items from this manufacturer

    Condition:

    Used surplus in good condition, stored in the shelves. All of the items are sold "AS IS, WHERE IS". Buyer is responsible for all of the taxes, duties, shipping and handling costs. Seller has the right to reject all bids.

    ‌
    		:‌
    Product Location:
    End Time:‌

    Item Description

    This lot of Line Items Pipe, Flanges, Valves, Wires, Gaslets, Connectors Etc. (12800 Line Items) ­­­­­is no longer needed for company's own operation and is being sold as an asset liquidation for its owner. Details are listed below:

    *Please see the attached PDF for the full list.

     

    Quantity DescriptionMANUFACTURER
    18ABRASIVE, SHEET: TYPE EMERY, GRIT 100, SIZE WD 230 X LG 280 MM, BOND/BACKING PAPER, FFT: WET & DRY; STEEL HIGH-GRADE SILICON CARBIDE; LATEX WATER PROOF ABRASIVE; ELECTRO-COATED. FOR WET GRINDING OF VARNISH, PAINTS, PRIMER,PLASTIC ETC. (FINE); WSP, Mnfr: HOMMEL Mnfr Part No: 43680 103, Mnfr: RHODIUS GMBH Mnfr Part No: UNKNOWNHOMMEL
    47ABRASIVE, SHEET: TYPE EMERY, GRIT 220, SIZE WD 230 X LG 280 MM, BOND/BACKING PAPER, FFT: WET & DRY; STEEL; HIGH-GRADE SILICON CARBIDE; LATEX WATER PROOF ABRASIVE; ELECTRO-COATED; FOR WET GRINDING OF VARNISH, PAINTS, PRIMER, PLASTICS ETC. (FINE), Mnfr: HOMMEL Mnfr Part No: 08 427 176, Reference No: WSP Mnfr: RHODIUS GMBHHOMMEL
    18ABRASIVE, SHEET: TYPE WATER PROOF, GRIT 100, SIZE WD 230 X LG 280 MM, MATERIAL SILICON CARBIDE, BOND/BACKING PAPER, STANDARD BS872-SECT-8, FFT: SANDPAPER-
    18ABRASIVE, SHEET: TYPE WATER PROOF, GRIT 150, SIZE WD 230 X LG 280 MM, MATERIAL SILICON CARBIDE, BOND/BACKING PAPER, STANDARD BS872-SECT-8, FFT: SANDPAPER-
    18ABRASIVE, SHEET: TYPE WATER PROOF, GRIT 320, SIZE WD 230 X LG 280 MM, MATERIAL SILICON CARBIDE, BOND/BACKING PAPER, STANDARD BS872-SECT-8, FFT: SANDPAPER-
    19ABRASIVE, SHEET: TYPE WATER PROOF/REGULAR, MATERIAL SILICON CARBIDE, BOND/BACKING PAPER/ELECTRO COATED, FFT: 20 PIECES/PACK; GRADE NO: 1., Reference No: CC-100/100CW Mnfr: HYUNDAI ABRASIVE-
    20ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 100; 2/0; COARSE, MATERIAL SILICON CARBIDE; ELECTRO COATED, BOND/BACKING PAPER, FFT: SINGLE FLEX,CLOSED COAT., Mnfr: KOST COMPANY LTD Mnfr Part No: CW 100-2C, Mnfr: FALCON SAFETY PRODUCTS INC Mnfr Part No: 100CWKOST COMPANY LTD
    18ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 150; 4/0, MATERIAL SILICON CARBIDE, BOND/BACKING SINGLE FLEXIBLE PAPER, FFT: CLOSED COAT., Suppl: AL-ASDAF EST JUBAIL, KSA Suppl P/N: UNKNOWN, Reference No: CIW-87-0142 Mnfr: UNKNOWN-
    19ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 180 CW, SIZE WD 9 X LG 10 IN, MATERIAL SILICON CARBIDE; ELECTRO COATED, BOND/BACKING FLINT SAND PAPER, FFT: SINGLE FLEX OPEN COAT; 2C; FINE, Mnfr: KOST COMPANY LTD Mnfr Part No: CW 100-2C, Suppl: AL-ASDAF EST JUBAIL, KSA Suppl P/N: UNKNOWNKOST COMPANY LTD
    18ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 220; 6/0, MATERIAL SILICON CARBIDE, BOND/BACKING SINGLE FLEXIBLE PAPER, FFT: CLOSED COAT., Suppl: AL-ASDAF EST JUBAIL, KSA Suppl P/N: UNKNOWN, Reference No: CIW-87-0142 Mnfr: UNKNOWN-
    18ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 250; 8/0, MATERIAL SILICON CARBIDE, BOND/BACKING SINGLE FLEXIBLE PAPER, FFT: CLOSED COAT., Suppl: AL-ASDAF EST JUBAIL, KSA Suppl P/N: UNKNOWN, Reference No: CIW-87-0142 Mnfr: UNKNOWN-
    18ABRASIVE, SHEET: TYPE WATERPROOF, GRIT 80, SIZE 1, MATERIAL SILICON CARBIDE, BOND/BACKING SINGLE FLEXIBLE PAPER, FFT: CLOSED COAT;, Suppl: AL-ASDAF EST JUBAIL, KSA Suppl P/N: UNKNOWN, Reference No: CIW-87-0142 Mnfr: UNKNOWN-
    90ADAPTOR, CONDUIT: INLET SIZE M25, INLET CONNECTION MNPT, OUTLET SIZE 1 IN, OUTLET CONNECTION FNPT, MATERIAL GS RIGID, CLASSIFICATION ATEX EX II 2 GD EX D IIC;  EX E II, STANDARD CE; CSA; UL, Mnfr: CMP PRODUCTS Mnfr Part No: 737DM3T35, Mnfr: WESCO INTERNATIONAL Mnfr Part No: UNKCMP PRODUCTS
    47ADAPTOR, HOSE: INLET SIZE 1 IN, INLET CONNECTION JIC SPECIAL, OUTLET SIZE 1 IN, OUTLET CONNECTION BSPF SPECIAL,  Reference No: F401S01I25 Mnfr: FUTURE SUPPORT INDUSTRIAL EST-
    25ADAPTOR, PIPE: INLET SIZE 1 & 1/4 IN, INLET CONNECTION MNPT, OUTLET SIZE M40, OUTLET CONNECTION FEMALE THD, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DT4M55CMP PRODUCTS
    25ADAPTOR, PIPE: INLET SIZE 1 IN, INLET CONNECTION MNPT, OUTLET SIZE M32, OUTLET CONNECTION FEMALE THD, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DT3M45CMP PRODUCTS
    71ADAPTOR, PIPE: INLET SIZE 1/2 IN, INLET CONNECTION MNPT, OUTLET SIZE 1/2 IN, OUTLET CONNECTION FNPT, MATERIAL INCONEL ALLOY 625, FFT:TYPE: SWIVEL GAUGE; WITHOUT INTEGRAL FLOW CHECK AND SYPHON,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    23ADAPTOR, PIPE: INLET SIZE 1/2 IN, INLET CONNECTION MNPT, OUTLET SIZE 1/2 IN, OUTLET CONNECTION FNPT, MATERIAL SS 316, FFT:TYPE: SWIVEL GAUGE; OVERALL LG: 70MM, MNFR: PARKER MNFR PART NO: SGB8M8F,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEPARKER
    25ADAPTOR, PIPE: INLET SIZE 1-1/4 IN, INLET CONNECTION MNPT, OUTLET SIZE M32, OUTLET CONNECTION FEMALE THD, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: UNKCMP PRODUCTS
    25ADAPTOR, PIPE: INLET SIZE 2 & 1/2 IN, INLET CONNECTION MNPT, OUTLET SIZE M63, OUTLET CONNECTION FEMALE THD, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DT7M75CMP PRODUCTS
    25ADAPTOR, PIPE: INLET SIZE 2 IN, INLET CONNECTION MNPT, OUTLET SIZE M50, OUTLET CONNECTION FEMALE THD, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DT6M65CMP PRODUCTS
    125ADAPTOR, PIPE: INLET SIZE 3/4 IN, INLET CONNECTION MNPT, OUTLET SIZE M20, OUTLET CONNECTION FEMALE THREADED, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DT2M25CMP PRODUCTS
    36ADAPTOR, PIPE: INLET SIZE 3/8 IN, INLET CONNECTION FNPT, OUTLET SIZE 1/4 IN, OUTLET CONNECTION MNPT, MATERIAL SS, GRADE 316, FFT:REDUCING; FOR NPT COILED HOSE CONNECTIONS, MNFR: CAJON SWAGELOK MNFR PART NO: SS-6-RA-4, MNFR: SWAGELOK  MNFR PART NO: SS-6-RA-4,  TEST CERTIFICATE COMMENTS: RELATED MILL CERTIFICATE TO BE SUBMITTED WITH THE ORDERCAJON SWAGELOK
    100ADAPTOR, PIPE: INLET SIZE M32, INLET CONNECTION MALE THREADED, OUTLET SIZE 1 & 1/4 IN, OUTLET CONNECTION FNPT, MATERIAL BRASS NI PLATED, Mnfr: CMP PRODUCTS Mnfr Part No: 737DM4T45CMP PRODUCTS
    48ADAPTOR, TUBE TO PIPE: TUBE SIZE 1/16 IN, TUBE CONNECTION COMPRESSION, PIPE SIZE 1/4 IN, MATERIAL SS ASTM A182, PIPE CONNECTION MNPT, GRADE F316, Mnfr: HY-LOK CORP. Mnfr Part No: CMC-1-4N-SS, Mnfr: SWAGELOK  Mnfr Part No: M-100-1-4-SSSWAGELOK
    75ADAPTOR, TUBE TO PIPE: TUBE SIZE 3/8 IN, PIPE SIZE 1/4 IN, PIPE CONNECTION MPT, MATERIAL PFA, FFT: MODEL NO: 1800 LTO; SERIES: TC/TOC; FOR TOTAL ORGANIC CARBON ANALYZER, Mnfr: ASTRODYNE Mnfr Part No: UV 80182ASTRODYNE
    18ADAPTOR: TYPE RIBBON CORE, SIZE 1-1.5 IN, APPLICATION RIGHT HAND MACHINE, FFT: FOR 1000M FOIL ROLLS,  Reference No: A3678-
    18ADAPTOR: TYPE RIBBON CORE, SIZE 1-1.5 IN, APPLICATION RIGHT HAND MACHINE, FFT: FOR USE OF 1000 M FOIL ROLLS ,  Reference No: A3679-
    44ASSEMBLY: TYPE CPU, FFT: SOURCE:CPU ASSEMBLY, OEM: YOKOGAWA ELECTRIC CORPORATION. OEM Part No: F9342ALYOKOGAWA ELECTRIC CORPORATION
    52ASSEMBLY: TYPE END OF LINE/POLARIZING, APPLICATION FIRE AND GAS DETECTION SYSTEM, FFT: WITH DIODE AND RESISTOR 10K OHM AND TERMINAL STRIP, Mnfr: DET-TRONICS Mnfr Part No: 000505-008DET-TRONICS
    19ASSEMBLY: TYPE FUEL GAS RISER, APPLICATION BURNES FOR FURNACE, FFT: MATERIAL: SS 304/CS, Mnfr: JOHN ZINK COMPANY Mnfr Part No: B-70901JOHN ZINK COMPANY
    18ASSEMBLY: TYPE NEEDLE VALVE HEAD, FFT: MATERIAL: SS ASTM A182 GR 316; PRESSURE RATING: 6000PSI; WITH STEM, HANDLE, BOLT, SEAL (VITON) AND PACKING (RTFE), Mnfr: ALCO VALVES LTD Mnfr Part No: UNK, Suppl: KIDDE Suppl P/N: ZMP695, MANDRG: CC1501-1006 SEC 1-4 Rev: 0 Item: 2-10 AND 13ALCO VALVES LTD
    18ASSEMBLY: TYPE TREADLE FOOT CONTROL, APPLICATION SAFETY SHOWER / EYE WASHER, Mnfr: HUGHES SAFETY SHOWERS Mnfr Part No: HFG10011HUGHES SAFETY SHOWERS
    49BAG, FILTER: TYPE FLAT, MATERIAL PESAS/PTFE, BAG SIZE LG 1.1 M, Mnfr: ZEPPELIN GMBH Mnfr Part No: 175844ZEPPELIN GMBH
    24BALL, VALVE: DIAMETER 6 MM, MATERIAL SS, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: K016/660BHDT GMBH
    550BALL: TYPE DECLOGGING, SIZE DIA 35 MM, MATERIAL EPDM WHITE, Mnfr: TECNO VIBRAZIONI VENANZETTI Mnfr Part No: VIPALBIAN35TECNO VIBRAZIONI VENANZETTI
    1150BAND, STRAPPING: LENGTH 14 IN, MATERIAL STEEL, FFT: HEAVY DUTY ADJUSTABLE CABLE SEAL, 1/16 INCH DIAMETER, CUSTOM PRINTED, NUMBERED, STANDARD SILVER COLOUR, LONG CHAR, IBN SINA NUMBER 00010001 TO 00020000, SECURITY CABLE LOCK., Mnfr: AMERICAN CASTING AND MFG CORP Mnfr Part No: UNK, Model/Machine No: CL-99-14 Mnfr: AMERICAN CASTING AND MFG CORPAMERICAN CASTING AND MFG CORP
    26BAR, FLAT: SIZE WD 100 X THK 8 MM, LENGTH 6 M, MATERIAL CS ASTM A36, ,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE-
    30BAR, FLAT: SIZE WD 75 X THK 8 MM, LENGTH 6 M, MATERIAL CS ASTM A36, ,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE-
    18BASE, RELAY: TYPE (11) PIN, ELECTRICAL RATING 300VAC 10A, STANDARD CSA; UL, Mnfr: ELECTROCATALYTIC Mnfr Part No: 76148-002, : UNKNOWN : 27E892, SPR: 2122 Rev: 0 Item: 43ELECTROCATALYTIC
    50BASE, RELAY: TYPE (8) PIN, ELECTRICAL RATING 10 A, Mnfr: POTTER & BRUMFIELD Mnfr Part No: 27E891POTTER & BRUMFIELD/TYCO ELECTRONICS
    17BASE, RELAY: TYPE GENERAL PURPOSE, SIZE WD 38 X LG 65 MM, ELECTRICAL RATING 400VAC 10A, STANDARD CE; CSA, Mnfr: RITTAL GMBH & CO KG Mnfr Part No: UNK, Mnfr: WEIDMULLER. Mnfr Part No: 8869350000RITTAL GMBH & CO KG
    109BASKET, STRAINER: MATERIAL SS DIN WN 1.4307, FFT:TYPE: SUPPORT TUBE; FOR FILTER CARTRIDGE, MNFR: COPERION WAESCHLE GMBH & CO KG MNFR PART NO: 058170,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATECOPERION WAESCHLE GMBH & CO KG
    17BEAKER, LABORATORY: TYPE POURING, CAPACITY RATING 2 QT, SIZE OD 6-3/8 X HT 4-7/8 IN, MATERIAL SS 304, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: KH-07208-20COLE-PARMER INSTRUMENT COMPANY
    43BEARING, FLANGE BLOCK: ROLLING ELEMENT BALL, SHAPE ELLIPTICAL, INSIDE DIAMETER 25 MM, BLOCK SIZE WD 68 X LG 130 MM, BOLT MOUNTING 2, BOLT DIAMETER 14 MM, Mnfr: NSK LTD Mnfr Part No: UCFL205R, Mnfr: SNR Mnfr Part No: UCFL 205, Suppl: UNKNOWN Suppl P/N: 100699, Suppl: UNKNOWN Suppl P/N: UCFL 205, DRAWING: DFS-11001Z-4H Rev: 0 Item: 16-
    28BEARING, ROLLER: TYPE TAPERED, ROW SINGLE, INSIDE DIAMETER 75 MM, OUTSIDE DIAMETER 115 MM, WIDTH 25 MM, FFT: MATERIAL AS PER JIS STANDARD, OEM: KOMATSU FORKLIFT CO. LTD. OEM Part No: 14X-14-19241, Mnfr: NTN CORPORATION Mnfr Part No: 32015XPX1KOMATSU FORKLIFT CO. LTD.
    49BEARING, SLEEVE: Mnfr: PLENTY FILTERS Mnfr Part No: 0796305704, MANDRG: 0796300701 Rev: 3 Item: 35PLENTY FILTERS
    17BEARING, SLEEVE: TYPE BUSH, LENGTH 35 MM, INSIDE DIAMETER 13 MM, OUTSIDE DIAMETER 23 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: HK013010/254BHDT GMBH
    34BEARING, SLEEVE: TYPE FLANGED BUSH, INSIDE DIAMETER 65 MM, OUTSIDE DIAMETER 70 MM, LENGTH 50 MM, MATERIAL MF62, FFT: B 6570-50, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 040152COPERION WAESCHLE GMBH & CO KG
    21BEARING, SLEEVE: TYPE LINE SHAFT, LENGTH 80 MM, MATERIAL CARBON, MNFR: SHIN NIPPON MACHINERY CO. LTD MNFR PART NO: PA-409327 L2, MNFR DRG 3PS-61993 REV: 2 ITEM NO: 969,  MODEL/MACHINE NO: 4X24 WYH-6ST,  EQUIP MODEL NO: 4X24 WYH-6ST,  EQUIP SERIAL NO: PH-33617,33618SHIN NIPPON MACHINERY CO. LTD
    21BELT, V: INSIDE CIRCUMFERENCE 585 MM, TOP WIDTH 13 MM, THICKNESS 8 MM, OUTSIDE CIRCUMFERENCE 635 MM, FFT: FOR TRANSFER BLOWER SYS 9, MODEL NO: 1018-5211; SERIAL NO: 284196, 286166, 284197 AND HVAC SYSTEM AT PP LAB, Mnfr: DORMAGER Mnfr Part No: A-23, Mnfr: DONGIL Mnfr Part No: A23DORMAGER
    102BEND, PIPE: SIZE 3 IN, CONNECTION BW, MATERIAL CS ASTM A234, GRADE WP22, DEGREE 180, SCHEDULE 80, RADIUS SHORT, STANDARD ASME B16.25, FFT:TYPE : SHORT RADIUS RETURN BEND. ALL BUTT WELD FITTINGS TO BE SUPPLIED BEVELED PER ASME B16.25., MNFR: DELFIN TUBES S.A. MNFR PART NO: UNK, MNFR DRG 210-D202 REV: 1 ITEM NO: CF04E,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDELFIN TUBES S.A.
    70BEND, PIPE: SIZE 3 IN, CONNECTION BW, MATERIAL CS ASTM A234, GRADE WPB, DEGREE 180, SCHEDULE 80, RADIUS SHORT, STANDARD ASME B16.25, FFT:TYPE : SHORT RADIUS RETURN BEND. ALL BUTT WELD FITTINGS TO BE SUPPLIED BEVELED PER ASME B16.25., MNFR: DELFIN TUBES S.A. MNFR PART NO: UNK, MNFR DRG 210-D204 REV: 1 ITEM NO: CF01H, CF02J,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDELFIN TUBES S.A.
    51BEND, PIPE: SIZE 3 IN, CONNECTION BW, MATERIAL SS ASTM A403, GRADE WPS 304H, DEGREE 180, SCHEDULE 80S, RADIUS SHORT, STANDARD ASME B16.25, FFT:TYPE : SHORT RADIUS RETURN BEND. ALL BUTT WELD FITTINGS TO BE SUPPLIED BEVELED PER ASME B16.25., MNFR: DELFIN TUBES S.A. MNFR PART NO: UNK, MNFR DRG 210-D201 REV: 1 ITEM NO: CF02D,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDELFIN TUBES S.A.
    36BEND, PIPE: SIZE 6 IN, CONNECTION BW, MATERIAL CS ASTM A234, GRADE WPB, DEGREE 180, SCHEDULE 40, RADIUS SHORT, STANDARD ASME B16.25, FFT:TYPE : SHORT RADIUS RETURN BEND, MNFR: DELFIN TUBES S.A. MNFR PART NO: UNK, INSPECTION REQUIREMENT: ALL BUTT WELD FITTINGS TO BE SUPPLIED BEVELED PER ASME B16.25.,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDELFIN TUBES S.A.
    18BEND, PIPE: SIZE 6 IN, CONNECTION BW, MATERIAL SS ASTM A403, GRADE WPS 304H, DEGREE 180, SCHEDULE 80S, RADIUS SHORT, STANDARD ASME B16.25, FFT:TYPE : SHORT RADIUS RETURN BEND. ALL BUTT WELD FITTINGS TO BE SUPPLIED BEVELED PER ASME B16.25., MNFR: DELFIN TUBES S.A. MNFR PART NO: UNK,  SUPPL: DELFIN TUBES S.A. SUPPL PART NO: UNK, MNFR DRG 210-D201 REV: 1 ITEM NO: CF01A, CF02B, CF01C,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDELFIN TUBES S.A.
    86BLADE: SIZE 2.4 MM, FFT: 672 E; FOR BAGGING MACHINE (WEIGHT: 25KG) MACHINE : 54487 MODEL : 2009, Mnfr: BEUMER MASCHINENFABRIK GMBH Mnfr Part No: 02351019BEUMER MASCHINENFABRIK GMBH
    23BLOCK, CONTACT: TYPE CONTACTOR, ELECTRICAL RATING 415 VAC, TERMINAL CAPTIVE SCREW, CIRCUIT 2, CONTACT ARRANGEMENT 1NO-1NC, STANDARD IEC 947-4-1, FFT: BASE L1 R1; FOR FREEDOM SERIES, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS42CUTLER HAMMER
    45BLOCK, CONTACT: TYPE CROSS-CONNECT, TERMINAL CAPTIVE SCREW, STANDARD CSA; UL, FFT: CONSTRUCTION: IDC CONTACT; PAIR COUNT: 4; PACKAGE OF 10; SIZE: WD 3.04 X HT0.6 X DP 2.1MM, Mnfr: ORTRONICS Mnfr Part No: OR-30200109, Suppl: TRANSTEL ENGINEERING PTE. LTD. Suppl P/N: UNKORTRONICS
    110BLOCK, TERMINAL: ELECTRICAL RATING 1KV 720A, TERMINAL TYPE SCREW, WIRE SIZE 6 MM2, SIZE WD 7.9 X LG 60 X HT 47 MM, STANDARD CSA; UL, FFT: TYPE: GROUND; COLOUR: GREEN, Mnfr: WEIDMULLER. Mnfr Part No: WPE6, Suppl: YOKOGAWA MIDDLE EAST EC Suppl P/N: UNKWEIDMULLER
    135BLOCK, TERMINAL: ELECTRICAL RATING 300V 20A, TERMINAL TYPE SCREW CLAMP, WIRE SIZE 2.5-5 MM2, FFT:, MNFR: ABB MNFR PART NO: 1068825ABB
    55BLOCK, TERMINAL: ELECTRICAL RATING 300V 25A, TERMINAL CAPTIVE SCREW, WIRE SIZE 4 MM2, SIZE WD 6 X HT 50 X DP 57 MM, CIRCUIT 1, STANDARD CSA; UL, FFT: FOR INTEGRATED CONTROL SYSTEM (DCS SYSTEM); EQUIP: A-ESD-01; A-ESD-02; A-ESD-06; A-ESD-101, Mnfr: WEIDMULLER. Mnfr Part No: DK4, Mnfr: AUGUST SYSTEMS LTD Mnfr Part No: UNKNOWN, DRAWING: SAY_60-W-H101-003A Rev: UNK Item: POS 7WEIDMULLER
    110BLOCK, TERMINAL: ELECTRICAL RATING 300V 6.3A, TERMINAL TYPE SCREW, WIRE SIZE 6 MM2, SIZE WD 7.9 X LG 60 X HT 62 MM, STANDARD CSA; UL, FFT: FUSE HOLDER; BOX: 100 PCS, Mnfr: WEIDMULLER. Mnfr Part No: WSI6, Suppl: YOKOGAWA MIDDLE EAST EC Suppl P/N: UNKWEIDMULLER
    105BLOCK, TERMINAL: ELECTRICAL RATING 400 VAC, TERMINAL TYPE SCREW, WIRE SIZE 2.5 MM2, SIZE WD 6.2 X LG 94 X HT 69 MM, CIRCUIT 1, STANDARD CE; CSA; IEC; UL, FFT:DOUBLE DISCONNECT, MNFR: WEIDMULLER. MNFR PART NO: WDTR2.5WEIDMULLER
    469BLOCK, TERMINAL: ELECTRICAL RATING 500V 32A, TERMINAL SCREW, WIRE SIZE 0.2-2.5 MM2, SIZE WD 5.2 X LG 67 MM, FFT: 2-LEVEL TERMINAL BLOCK, NUMBER OF CONNECTIONS: 4, UKKB 3 TERMINAL, COLOR: GRAY, INSULATING MATERIAL: PA, INFLAMMABILITY CLASS ACC. TO UL 94: VO, MV SWITCHGEAR 4.16KV (RD.911B-E), DR PLANT MODULE E, OEM: PHOENIX CONTACT OEM Part No: 2771010, DRAWING: DRH.RD.9130-E4600/DOK-007 Rev: 0PHOENIX CONTACT
    52BLOCK, TERMINAL: ELECTRICAL RATING 500V 6.3A, TERMINAL TYPE SCREW, WIRE SIZE 6 MM2, SIZE WD 8 X LG 60 X HT 72 MM, STANDARD CSA, FFT: WITH FUSE (CURRENT: 1A); FOR F AND GDS SYSTEM, Mnfr: WEIDMULLER. Mnfr Part No: WSI6-1AWEIDMULLER
    1042BLOCK, TERMINAL: ELECTRICAL RATING 600V 20A, TERMINAL TYPE SCREW, WIRE SIZE 2.5 MM2, SIZE WD 5.1 X LG 60 X HT 49 MM, STANDARD CSA; IEC; UL, FFT:, MNFR: WEIDMULLER. MNFR PART NO: 1855610000,  SUPPL: YOKOGAWA  MIDDLE EAST EC SUPPL PART NO: UNKWEIDMULLER
    70BLOCK, TERMINAL: ELECTRICAL RATING 600V 25A, TERMINAL TYPE SCREW, WIRE SIZE 26-10 AWG, SIZE WD 6 X LG 36.5 X HT46.5 MM, STANDARD CE; IEC, FFT: VERSION: FEED-THROUGH TERMINAL, Mnfr: WEIDMULLER. Mnfr Part No: 0269660000, Suppl: WESCO REILY ELECTRICAL SUPPLY& DISTRIBUTION INC Suppl P/N: UNKWEIDMULLER
    51BLOCK, TERMINAL: ELECTRICAL RATING 600V 30A, CIRCUIT 4, FFT:WITH COVER, MNFR: GE (GENERAL  ELECTRIC CO.) MNFR PART NO: EB27B04SC,  SUPPL: POWELL ELECTRICAL MFG CO. SUPPL PART NO: UNKGE (GENERAL  ELECTRIC CO.)
    69BLOCK, TERMINAL: ELECTRICAL RATING 600V 30A, TERMINAL TYPE SCREW, WIRE SIZE 6-32 AWG, SIZE WD 1.25 IN, CIRCUIT 3, STANDARD CE; UL, Mnfr: CUTLER-HAMMER Mnfr Part No: TBAL30, Suppl: WESCOSA Suppl P/N: UNKCUTLER HAMMER
    75BLOCK, TERMINAL: ELECTRICAL RATING 600V 40A, WIRE SIZE 20-10 AWG, SIZE WD 6 MM, FFT: BOIX LUG  STYLE, Mnfr: TELEMECANIQUE Mnfr Part No: AB1VV43-5U, OEM: ZAMIL AIR CONDITIONERS OEM Part No: UNKTELEMECANIQUE
    44BLOCK, TERMINAL: ELECTRICAL RATING 600V 90A, TERMINAL TYPE SCREW, WIRE SIZE #4-14 AWG, CIRCUIT 3, STANDARD CSA, FFT: SMALL, Mnfr: FERRAZ SHAWMUT Mnfr Part No: 63103, Suppl: WESCOSA Suppl P/N: UNKFERRAZ SHAWMUT
    20BLOCK, TERMINAL: ELECTRICAL RATING 600VAC 50A, TERMINAL TYPE CAPTIVE SCREW, WIRE SIZE 18-10 AWG, SIZE WD 1.5 X LG 4.5 IN, CIRCUIT 6, STANDARD UL, Mnfr: INSTRUMENT TRANSFORMERS INC Mnfr Part No: IKU6, Suppl: WESCOSA Suppl P/N: UNKINSTRUMENT TRANSFORMERS INC
    19BLOCK, TERMINAL: ELECTRICAL RATING 630 VAC, TERMINAL TYPE SCREW CLAMP, WIRE SIZE 4 MM2, SIZE WD 64 X HT 66 X THK 6 MM, STANDARD UL, FFT: FOR SOOTBLOWER PANEL, Mnfr: CABUR SRL Mnfr Part No: DAS4, Mnfr: ELETECNO IMPIANTI INTEGRATI S.R.L. Mnfr Part No: UNK, Mnfr: MACCHI S.P.A Mnfr Part No: M9290558CABUR S.R.L.
    85BLOCK, TERMINAL: ELECTRICAL RATING 690 VAC, TERMINAL TYPE CAPTIVE SCREW, WIRE SIZE 4 MM2, SIZE WD 6.1 X LG 60 X HT 47 MM, CIRCUIT 2, STANDARD CSA; UL, FFT: FOR CONDENSER VENT MONITOR, Mnfr: WEIDMULLER. Mnfr Part No: WDU4 1020100000, Suppl: WESTECH INDUSTRIAL Suppl P/N: UNKWEIDMULLER
    49BLOCK, TERMINAL: ELECTRICAL RATING 690V 66A, TERMINAL TYPE SCREW, WIRE SIZE 16 MM2, SIZE WD 13.5 X LG 60 X HT 63 MM, STANDARD CE; CSA, FFT:COLOR: GREEN; TYPE: GROUND, MNFR: WEIDMULLER. MNFR PART NO: 1020450000,  SUPPL: YOKOGAWA ELECTRIC CORPORATION. SUPPL PART NO: UNK, MNFR DRG XXX-65W-….-SHEET 1004/1005 REV: 0 ITEM NO: TXWEIDMULLER
    42BLOCK, TERMINAL: ELECTRICAL RATING 800V 0.5A, TERMINAL TYPE SPRING, WIRE SIZE 28-12 AWG, SIZE WD 5.2 X LG 48.5 MM, CIRCUIT 2, STANDARD UL, FFT:, MNFR: PHOENIX CONTACT MNFR PART NO: ST 2.5-DIO/L-RPHOENIX CONTACT
    47BLOCK, TERMINAL: ELECTRICAL RATING 800V 31A, TERMINAL TYPE SCREW, WIRE SIZE 2.5 MM2, FFT: FOR MOUNTING ON NS 35/7.5; AS.KISKOON, Mnfr: ABB Mnfr Part No: 1SNA115486R0300, Mnfr: ABB Mnfr Part No: MA2,5/5ABB
    18BLOCK, TERMINAL: ELECTRICAL RATING 800V 720A, TERMINAL TYPE SCREW, WIRE SIZE 1.5-16 MM2, SIZE WD 7.9 X LG 60 X HT 47 MM, STANDARD CSA; UL, FFT: INCOMING EARTH TERMINAL; TB0, Mnfr: WEIDMULLER. Mnfr Part No: WPE 6WEIDMULLER
    35BLOCK, TERMINAL: TERMINAL TYPE SCREW, WIRE SIZE 1 MM2, SIZE DIA 2.5 MM2, FFT: COLOR: GREY, Mnfr: ABB Mnfr Part No: 1SNA199554R2300, Mnfr: ABB Mnfr Part No: D2.5/5.ADOABB
    35BLOCK, TERMINAL: TERMINAL TYPE SCREW, WIRE SIZE 1.5 MM2, SIZE DIA 4 MM2, FFT: COLOR: GREY, Mnfr: ABB Mnfr Part No: 1SNA199034R1500, Mnfr: ABB Mnfr Part No: D4/6.ADOABB
    22BOARD, INSULATION: SIZE WD 600 X LG 1100 X THK 7.6 MM, MATERIAL CERAMIC (MAFTEC OBM), FFT: FOR S-10, Mnfr: MITSUBISHI CORPORATION Mnfr Part No: UNK, Suppl: JOHN ZINK COMPANY Suppl P/N: UNKMITSUBISHI CORPORATION
    23BOLT, EYE: LENGTH 55 MM, DIAMETER M36, THREADS 4 MM, MATERIAL STEEL, GRADE C15, THREAD LENGTH 40 MM, FFT:ACCESSORY,  CATALOGUE NO: 12214 MNFR: UNKNOWN-
    43BOLT, J: DIAMETER 1-5/8 IN, LENGTH 630 MM, FFT: FOUNDATION; WITH NUT AND WASHER-
    144BOLT, MACHINE: DIAMETER 10 MM, LENGTH 20 MM, MATERIAL SS 304, THREADS 1.5 MM, GRADE A2-70, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 933, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.401.745.006SULZER CHEMTECH AG
    50BOLT, MACHINE: DIAMETER 10 MM, LENGTH 25 MM, THREADS 1.5 MM, MATERIAL AS ASTM A193, GRADE B6, HEAD HEX, THREAD LENGTH FULL, Mnfr: GTC Mnfr Part No: BLT1-M10025GTC
    141BOLT, MACHINE: DIAMETER 10 MM, LENGTH 40 MM, MATERIAL SS ASTM A193, THREADS 1.5 MM, GRADE B8, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 933, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.215.842.002SULZER CHEMTECH AG
    48BOLT, MACHINE: DIAMETER 10 MM, LENGTH 60 MM, MATERIAL SS ASTM A193, THREADS 1.5 MM, GRADE B8, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 933, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.215.814.007SULZER CHEMTECH AG
    44BOLT, MACHINE: DIAMETER 1-1/4 IN, LENGTH 120 MM, MATERIAL SS, HEAD HEX, FFT: WITH NUT -
    627BOLT, MACHINE: DIAMETER 1-1/8 IN, LENGTH 25 MM, THREADS 7 UNC TPI, MATERIAL CS ASTM A105, FFT: TYPE: PLUG; FOR AIR COOLED HEAT EXCHANGER, Mnfr: SHIN-JIN INC. Mnfr Part No: SJ-1.18-25-A105SHIN-JIN INC.
    68BOLT, MACHINE: DIAMETER 16 MM, LENGTH 50 MM, MATERIAL SS 304, THREADS 2 MM, GRADE A2-70, HEAD HEX, STANDARD DIN 933, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 015.151.042.307SULZER CHEMTECH AG
    25BOLT, MACHINE: DIAMETER 16 MM, LENGTH 60 MM, MATERIAL SS ASTM A193, THREADS 2 MM, GRADE B8, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 933, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.216.980.107SULZER CHEMTECH AG
    20BOLT, MACHINE: DIAMETER 3/4 IN, LENGTH 2-1/2 IN, THREADS UNC, MATERIAL SS 304, HEAD HEX, Mnfr: SULZER CHEMTECH AG Mnfr Part No: 106.185.299.108SULZER CHEMTECH AG
    20BOLT, MACHINE: DIAMETER 3/4 IN, LENGTH 90 MM, THREADS UNC 10 TPI, MATERIAL SS ASTM A193, GRADE B8, HEAD HEX, STANDARD ASME B1.1, FFT: WITH NUT AND WASHER SS ASTM A194 GR 8-
    351BOLT, MACHINE: DIAMETER 3/8 IN, LENGTH 1-1/4 IN, THREADS UNC, MATERIAL SS 304, HEAD HEX, THREAD LENGTH FULL IN, FFT: USED IN JIS SUPPORT AND SKIW COLLECTOR, Suppl: SULZER CHEMTECH AG Suppl P/N: 106.216.980.022, DRAWING: 106.228.721 Rev: N/A Item: 002, 106.228.732  Rev: N/A Item: 012, 106.231.224 Rev: N/A Item: 012-
    23BOLT, MACHINE: DIAMETER 30 MM, LENGTH 115 MM, THREADS 3 MM, FFT:FOR TRIP AND THROTTLE VALVE, MNFR: ELLIOTT TURBOMACHINERY LTD MNFR PART NO: FSK-HT30115X3, MNFR DRG ES/8650050 REV: 5 ITEM NO: 8ELLIOTT TURBOMACHINERY LTD
    45BOLT, MACHINE: DIAMETER 5/8 IN, LENGTH 70 MM, THREADS UNC 11 TPI, MATERIAL CS ASTM A307 GALV, GRADE B, HEAD HEX-
    118BOLT, MACHINE: DIAMETER 7/8 IN, LENGTH 120 MM, MATERIAL CS ASTM A307, THREADS UNC 9 TPI, GRADE B, HEAD HEAVY HEX, STANDARD ASME B1.1, FFT:WITH (1) SEMI-FINISHED HEAVY HEX NUT (MATERIAL: CS ASTM A194 GR 2H, GALV), LENGTH MEASURED FROM BEARING SURFACE OF THE-
    29BOLT, MACHINE: DIAMETER M10, LENGTH 25 MM, THREADS 1.5 MM, MATERIAL AS ASTM A193, GRADE B8M, HEAD HEX, STANDARD ASME B1.1-
    98BOLT, MACHINE: DIAMETER M10, LENGTH 25 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304-
    16862BOLT, MACHINE: DIAMETER M10, LENGTH 30 MM, THREADS 1.5 MM, MATERIAL AS ASTM A193, GRADE B6, HEAD HEX, FFT: 4 PASS EVEN TRAYS 2 U /I 100-
    97BOLT, MACHINE: DIAMETER M10, LENGTH 30 MM, THREADS 1.5 MM, MATERIAL CS, Mnfr Drg 4025-P-PK21610-003 Rev: 0 Item No: UNK-
    112BOLT, MACHINE: DIAMETER M10, LENGTH 30 MM, THREADS 1.5 MM, MATERIAL SS 304, GRADE B6, HEAD HEX, THREAD LENGTH FULL, Mnfr: METAWA TRAY BV P/N: UNKNOWN, DRAWING: 82P-405-3-6 Rev: 0 Item: 231, SPR: 022-1/R Rev: 0 Item: 058METAWA TRAY BV
    290BOLT, MACHINE: DIAMETER M10, LENGTH 30 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304-
    44BOLT, MACHINE: DIAMETER M10, LENGTH 30 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304, THREAD LENGTH FULL, FFT: WITH (2) NUTS (MATERIAL: SS 304), Mnfr: DOSSARY HARDWARE & GEN STORES Mnfr Part No: UNKDOSSARY HARDWARE & GEN STORES
    893BOLT, MACHINE: DIAMETER M10, LENGTH 35 MM, MATERIAL AS ASTM A193, THREADS 1.5 MM, GRADE B8, HEAD HEX, FFT:SURFACE TREATREATMENT: NI-PLATED-
    26BOLT, MACHINE: DIAMETER M10, LENGTH 35, THREADS 1.5 MM, MATERIAL STEEL, GRADE 8.8, HEAD HEX, STANDARD DIN 933, FFT: SPANNER OPENING 17 MM; PRODUCT CLASS A; STANDARD ISO 4017; DIN EN 24017, Mnfr: NATIONAL FACTORY Mnfr Part No: DIN 933NATIONAL FACTORY
    41BOLT, MACHINE: DIAMETER M10, LENGTH 50 MM, MATERIAL AS ASTM A193, THREADS 1.5 MM, GRADE B6, HEAD HEX, FFT:FOR ODD TRAY#1 U / I 29 AND EVEN TRAY#32 U/ I 34, MNFR DRG 10-07090-13PC-13510 REV: 0 ITEM NO: UNK-
    780BOLT, MACHINE: DIAMETER M10, LENGTH 50 MM, THREADS 1.5 MM, MATERIAL AS ASTM A193, GRADE B6, HEAD HEX, THREAD LENGTH FULL, Mnfr: GTC Mnfr Part No: BLT1-M10050GTC
    89BOLT, MACHINE: DIAMETER M10, LENGTH 50 MM, THREADS 1.5 MM, MATERIAL SS DIN WN 1.4301, GRADE 304, HEAD HEX, STANDARD DIN 931, FFT: SPANNER OPENING 17 MM; PRODUCT CLASS A, Mnfr: NATIONAL FACTORY Mnfr Part No: DIN 931NATIONAL FACTORY
    89BOLT, MACHINE: DIAMETER M10, LENGTH 60 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304, FFT: TYPE: FULL THREAD; WITH NUT (SS 304), DOMED WASHER (SS 410), UNIVERSAL CLAMP (SS 410); FOR COLUMN TRAY, Mnfr: SULZER LTD. Mnfr Part No: UNK, Mnfr Drg 10.06553-53P2 Rev: 0 Item No: 415,401,451,303SULZER LTD.
    23BOLT, MACHINE: DIAMETER M10, LENGTH 60 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304, FFT: WITH DOME WASHER (SS 410), (2) HEX NUT (SS 304), UNIVERSAL CLAMP (SS 410); FOR VSI DISTRIBUTOR OF STRIPPER; VSI PLATE THK: 2MM; GSKT THK: 5MM; RING THK: 16MM., Mnfr: SULZER LTD. Mnfr Part No: 10.06553-83PSULZER LTD.
    23BOLT, MACHINE: DIAMETER M10, LENGTH 60 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304, Mnfr: DOSSARY HARDWARE & GEN STORES Mnfr Part No: UNKDOSSARY HARDWARE & GEN STORES
    282BOLT, MACHINE: DIAMETER M10, LENGTH 60 MM, THREADS 1.5 MM, MATERIAL SS, GRADE 304, THREAD LENGTH FULL, FFT: WITH (2) NUTS (MATERIAL:SS 304) AND DOMED WASHER (SIZE: ID 11 X OD 32 X THK 2; MATERIAL:SS 304) AND UNIVERSAL CLAMP (MATERIAL:SS 304); FOR COLUMN TRAY;TRAY THK:3 MM, Mnfr: SULZER LTD. Mnfr Part No: 10.06553-203P1, Mnfr Drg 10.06553-203P1 Rev: 0 Item No: 414, 401, 451, 301, Mnfr Drg 10.06553-205P Rev: 0 Item No: 414,401,451,301SULZER LTD.
    59BOLT, MACHINE: DIAMETER M12, LENGTH 30 MM, THREADS 1.75 MM, MATERIAL STEEL, HEAD HEX, STANDARD ISO 4017, Mnfr: ANDRITZ AG Mnfr Part No: 100003174ANDRITZ AG
    218BOLT, MACHINE: DIAMETER M12, LENGTH 35 MM, THREADS 1.75 MM, MATERIAL CS ASTM A307, GRADE A, HEAD HEX, FFT: WITH NUT (CS ASTM A563 GR A); (2) PLAIN WASHER ; ST. WASHER; FOR AIR COOLED HEAT EXCHANGER, Mnfr: KOREA HEAT EXCHANGER IND. CO. LTD. Mnfr Part No: SKB-M12-HEX-35KOREA HEAT EXCHANGER IND. CO. LTD.
    98BOLT, MACHINE: DIAMETER M12, LENGTH 35 MM, THREADS 1.75 MM, MATERIAL CS, Mnfr Drg 4025-P-PK21610-003 Rev: 0 Item No: UNK-
    49BOLT, MACHINE: DIAMETER M12, LENGTH 40 MM, MATERIAL AS GALVANIZED ASTM A325, THREADS 1.75 MM, GRADE 8, HEAD HEX, FFT:, MNFR: UNKNOWN MNFR PART NO: 1910,  CATALOGUE NO: 12490 MNFR: UNKNOWNUNKNOWN
    34BOLT, MACHINE: DIAMETER M12, LENGTH 40 MM, THREADS 1.75 MM, MATERIAL SS, GRADE 304, Mnfr: DOSSARY HARDWARE & GEN STORES Mnfr Part No: UNKDOSSARY HARDWARE & GEN STORES
    17BOLT, MACHINE: DIAMETER M12, LENGTH 50 MM, THREADS 1.75 MM, MATERIAL AS ASTM A193, GRADE B8M, FFT: FOR COLUMN INTERNAL, Mnfr: KOCH-GLITSCH Mnfr Part No: 896-316J1410KOCH-GLITSCH
    47BOLT, MACHINE: DIAMETER M12, LENGTH 50 MM, THREADS 1.75 MM, MATERIAL SS 304, HEAD HEX, THREAD LENGTH 50 MM, FFT: FOR REGENERATOR; P.O.NO: SFPD1P0007, Mnfr: BELLELI SAUDI HEAVY IND.LTD Mnfr Part No: UNKNOWN, DRAWING: DA6764-01-001/DA6764-02-001 Rev: 0, For Tag/Equip No: 1-C302, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE ITEMBELLELI SAUDI HEAVY IND.LTD
    97BOLT, MACHINE: DIAMETER M12, LENGTH 60 MM, THREADS 1.75 MM, MATERIAL CS, Mnfr Drg 4025-P-PK21610-003 Rev: 0 Item No: UNK-
    19BOLT, MACHINE: DIAMETER M14, LENGTH 100 MM, THREADS 2 MM, MATERIAL STEEL, GRADE 8.8, HEAD HEX, STANDARD DIN 931, FFT: SPANNER OPENING 22 MM; PRODUCT CLASS A, Mnfr: NATIONAL FACTORY Mnfr Part No: DIN 931NATIONAL FACTORY
    47BOLT, MACHINE: DIAMETER M16, LENGTH 30 MM, THREADS 2 MM, MATERIAL SS, GRADE A2-70, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 912, FFT: MODEL# 6000L, SERIAL# 61-A2, FOR 550-ME-215, Mnfr: SOLITEC ENGINEERING LTD Mnfr Part No: UNKNOWN, DRAWING: 61-A-4 Rev: 0, Reference No: 3459/93 Mnfr: ALLCAP LIMITEDSOLITEC ENGINEERING LTD
    204BOLT, MACHINE: DIAMETER M16, LENGTH 35 MM, THREADS 2 MM, MATERIAL SS 304, GRADE A2-70, HEAD HEX, THREAD LENGTH FULL, FFT: WITH A NUT, Mnfr: MITSUBISHI HEAVY INDUSTRIES, LTD. Mnfr Part No: UNKNOWN, DRAWING: PC-0023T1-04 Rev: 0 Item: 359MITSUBISHI HEAVY INDUSTRIES, LTD.
    136BOLT, MACHINE: DIAMETER M16, LENGTH 60 MM, MATERIAL SS, GRADE A2, HEAD HEX, STANDARD DIN 931, Mnfr: ZEPPELIN GMBH Mnfr Part No: 2770, Mnfr: MCB Mnfr Part No: 4301061660ZEPPELIN GMBH
    70BOLT, MACHINE: DIAMETER M16, LENGTH 60 MM, THREADS 2 MM, MATERIAL STEEL HDG, GRADE 8.8, HEAD HEX, STANDARD DIN 933, FFT: OS; FOR SILO, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: 156041JANSENS & DIEPERINK B.V.
    25BOLT, MACHINE: DIAMETER M16, LENGTH 70 MM, THREADS 2 MM, MATERIAL STEEL HDG, GRADE 8.8, HEAD HEX, THREAD LENGTH FULL, STANDARD DIN 933, FFT: OS; FOR SILO, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: 126502JANSENS & DIEPERINK B.V.
    18BOLT, MACHINE: DIAMETER M16, LENGTH 80 MM, THREADS 2 MM, STANDARD EN 10083-1, Mnfr: BURCKHARDT COMPRESSION Mnfr Part No: 122.850.567.001BURCKHARDT COMPRESSION
    97BOLT, MACHINE: DIAMETER M20, LENGTH 50 MM, THREADS 2.5 MM, MATERIAL CS, Mnfr Drg 4025-P-PK21610-003 Rev: 0 Item No: UNK-
    123BOLT, MACHINE: DIAMETER M20, LENGTH 55 MM, THREADS 2.5 MM, MATERIAL CS ASTM A325, GRADE 1, HEAD HEX, FFT: WITH NUT (CS ASTM A563 GR DH); (2) PLAIN WASHER; FOR AIR COOLED HEAT EXCHANGER, Mnfr: KOREA HEAT EXCHANGER IND. CO. LTD. Mnfr Part No: SKB-M20-HEX-55KOREA HEAT EXCHANGER IND. CO. LTD.
    19BOLT, MACHINE: DIAMETER M20, LENGTH 55 MM, THREADS 2.5 MM, MATERIAL CS JIS G3101, GRADE SS400, HEAD HEX-
    98BOLT, MACHINE: DIAMETER M20, LENGTH 55 MM, THREADS 2.5 MM, MATERIAL CS, Mnfr Drg 4025-P-PK21610-003 Rev: 0 Item No: UNK-
    178BOLT, MACHINE: DIAMETER M20, LENGTH 60 MM, MATERIAL AS, THREADS 2.5 MM, GRADE 8.8, HEAD HEX, STANDARD UNI 5739, FFT:FOR ENDWALL PROFILES (10PCT SPARE INCLUDED); FLD SPLC,  CATALOGUE NO: 9143 MNFR: UNKNOWN-
    132BOLT, MACHINE: DIAMETER M20, LENGTH 60 MM, MATERIAL CS ASTM A325, THREADS 2.5 MM, GRADE 8S, HEAD HEX, FFT:WITH NUT AND TWO WASHERS, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNKDOSSARY HARDWARE & GEN STORES
    45BOLT, MACHINE: DIAMETER M20, LENGTH 90 MM, THREADS 2.5 MM, MATERIAL STEEL, GRADE 8.8, HEAD HEX, STANDARD DIN 931, FFT: SPANNER OPENING 30 MM; PRODUCT CLASS A, Mnfr: NATIONAL FACTORY Mnfr Part No: UNKNOWNNATIONAL FACTORY
    19BOLT, MACHINE: DIAMETER M24, LENGTH 100 MM, MATERIAL SS, GRADE A2, HEAD HEX, STANDARD DIN 931, Mnfr: ZEPPELIN GMBH Mnfr Part No: 2796ZEPPELIN GMBH
    75BOLT, MACHINE: DIAMETER M24, LENGTH 160 MM, MATERIAL AS ASTM A193, THREADS 3 MM, GRADE B7, HEAD HEX, FFT:WITH WASHER, (3) GASKETS AND TEST RING,  CATALOGUE NO: 12186 MNFR: UNKNOWN-
    56BOLT, MACHINE: DIAMETER M24, LENGTH 80 MM, MATERIAL SS, GRADE A2, HEAD HEX, STANDARD DIN 931, Mnfr: ZEPPELIN GMBH Mnfr Part No: 2794ZEPPELIN GMBH
    50BOLT, MACHINE: DIAMETER M24, LENGTH 80 MM, THREADS 3 MM, MATERIAL STEEL, GRADE 8.8, HEAD HEX, STANDARD DIN 933, FFT: SPANNER OPENING 36 MM; PRODUCT CLASS A; STANDARD ISO 4017; DIN EN 24017, Mnfr: NATIONAL FACTORY Mnfr Part No: DIN 933NATIONAL FACTORY
    55BOLT, MACHINE: DIAMETER M36, LENGTH 180 MM, MATERIAL AS ASTM A193, THREADS 4 MM, GRADE B7, HEAD HEX, FFT:WITH WASHER, (3) GASKETS AND TEST RING,  CATALOGUE NO: 12183 MNFR: UNKNOWN-
    22BOLT, MACHINE: HEAD HEX, FFT: FOR TEMPERATURE TRANSMITTER, Mnfr: YOKOGAWA  MIDDLE EAST EC Mnfr Part No: Y9616NUYOKOGAWA  MIDDLE EAST EC
    248BOLT: DIAMETER 20 MM, LENGTH 60 MM, MATERIAL CS ASTM A325, HEAD HEX, FFT: FOR FLARE SYSTEM-
    31BOLT: TYPE EXPANSION, DIAMETER 12 MM, LENGTH 55 MM, THREADS 2.5 MM, MATERIAL SS ASTM A182, GRADE 316, FFT: WITH (1) NUT AND (1) WASHER-
    97BOLT: TYPE LOCK, DIAMETER 19.1 MM, MATERIAL PLASTIC OVER SOLID STEEL, FFT: HEAVYDUTY; ONE LINE UP TO 8 SPACES PLUS CONSECUTIVE NUMBERS UP TO 6 DIGITS; 200 SEALS PER CARTON, Mnfr: AMERICAN CASTING AND MFG CORP Mnfr Part No: PBLT-1AMERICAN CASTING AND MFG CORP
    4966BOTTLE: CAPACITY 300 ML, TYPE SAMPLE, MATERIAL GLASS, COLOR AMBER,  Reference No: 2011865 Mnfr: DOPAK, INC-
    50BOTTLE: CAPACITY 500 ML, TYPE LIGHT SENSITIVE MEDIA, MATERIAL GLASS, COLOR AMBER, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-34523-20,  Model/Machine No: 14399-500COLE-PARMER INSTRUMENT COMPANY
    25BOTTLE: CAPACITY 60 ML, TYPE SAMPLE, MATERIAL TYPE III SODA-LIME GLASS, COLOR CLEAR, FFT: ROUND SHOULDER; FOAM BACKED PTFE-LINED CAP; NECK ID: 20 MM; PACK OF 24 EA, OEM: COLE-PARMER INSTRUMENT COMPANY OEM Part No: EW-34602-20, Mnfr: QORPAK,USA Mnfr Part No: GLC-01099,  Model/Machine No: 7910COLE-PARMER INSTRUMENT COMPANY
    75BOX, ELECTRICAL: TYPE 37 MM DOUBLE BACK, SIZE 8.6 X 14.6 CM, STANDARD UL, FFT: STYLE: 4 GANG; CATEGORY 6; COLOUR: WHITE; COMPONENT PARTS; SUPPLIED IN 1 SET OF100, Mnfr: SYSTIMAX Mnfr Part No: 999901704,  Model/Machine No: M14D Mnfr: SYSTIMAXSYSTIMAX
    45BOX, ELECTRICAL: TYPE DIGITAL JUNCTION, SIZE 2.5 MM2, MATERIAL SS 316L, STANDARD CE, FFT: CLASSIFICATION: CL I DIV 2 GR 11A,11B,11C;  ENCLOSURE: NEMA 4X, EQUIVALENT; LABELS: SEE LABEL ENGR, Mnfr: WALSALL LTD Mnfr Part No: FXLS213DWALSALL LTD
    40BOX, ELECTRICAL: TYPE JUNCTION, SIZE SQ 180 X HT 95 MM, MATERIAL SS 316L, SHAPE SQUARE, STANDARD CE, FFT:,  CATALOGUE NO: 14291-
    37BOX, ELECTRICAL: TYPE JUNCTION/TERMINAL, SIZE SQ 150 X HT 90 MM, MATERIAL SS, SHAPE SQUARE, FFT: CLASSIFICATION: SIR99ATEX3199; 54/66/67, WALLSALL SLS41, Mnfr: PEPPERL & FUCHS GMBH Mnfr Part No: SLS41PEPPERL & FUCHS GMBH
    26BREAKER, CIRCUIT: AMPERAGE 20 A, VOLTAGE 400 VAC, INTERRUPT CAPACITY 6 KA, POLE 1, TYPE MINIATURE, MOUNT DIN RAIL, TEMPERATURE RATING -25 TO 55 DEG C, STANDARD CE; CSA; UL, FFT:TRIPPING CHARACTERISTIC: B, MNFR: ABB MNFR PART NO: S201-B20ABB
    55BREAKER, CIRCUIT: TYPE MINIATURE, VOLTAGE 230/440 VAC, POLE 1, AMPERAGE 20 A, INTERRUPT CAPACITY 6 KA, MOUNT DIN RAIL, TEMPERATURE RATING -25 TO 55 DEG C, STANDARD CE; CSA; UL, FFT: TRIPPING CHARACTERISTIC: C, Mnfr: ABB Mnfr Part No: S201-C20, Suppl: YOKOGAWA NEDERLAND BV Suppl P/N: UNKABB
    35BREAKER, CIRCUIT: TYPE MINIATURE, VOLTAGE 440 VAC, POLE 2, AMPERAGE 20 A, INTERRUPT CAPACITY 20 KA, MOUNT DIN RAIL, STANDARD IEC 947-2, FFT: WITH GROUND FAULT MODULE, Mnfr: SCHNEIDER ELECTRIC Mnfr Part No: 24271+26502, Suppl: CORTEM SPA Suppl P/N: NMG24271+NMG26502, Model/Machine No: C60N Mnfr: SCHNEIDER ELECTRICSCHNEIDER ELECTRIC
    38BREAKER, CIRCUIT: TYPE MOLDED CASE MAGNETIC, VOLTAGE 120-240 VAC, POLE 1, AMPERAGE 30 A, INTERRUPT CAPACITY 10 KA, MOUNT PANEL/SURFACE, FRAME THQB, STANDARD CSA; UL, Mnfr: GE (GENERAL ELECTRIC CO.) Mnfr Part No: THQB1130GE (GENERAL  ELECTRIC CO.)
    45BREAKER, CIRCUIT: TYPE MOULDED CASE, VOLTAGE 415 VAC, POLE 3, AMPERAGE 250 A, INTERRUPT CAPACITY 120 KA, MOUNT DIN RAIL, TEMPERATURE RATING 40 DEG C, STANDARD CSA; IEC 60947-2; UL, FFT: MAGNETIC TRIP CURRENT (I3): 60-140A; RATED CURRENT OF THE THERMOMAGNETIC RELEASE (In): 10A; FOR FIXED FRONT TERMINALS, Mnfr: ABB Mnfr Part No: 1SDA055074R0001AABB
    97BREAKER, CIRCUIT: VOLTAGE 600 VAC, POLE 3, AMPERAGE 20 A, Mnfr: GE (GENERAL ELECTRIC CO.) Mnfr Part No: THED 136020WLGE (GENERAL  ELECTRIC CO.)
    17BREATHER: TYPE GLAND, SIZE M25 X 1.5 MM, MATERIAL POLYESTER, CONNECTION THD, STANDARD CSA, FFT: ENCLOUSRE: IP66/64; CLASSIFICATION: EX II 2 G, EEX E II PTB 01 ATEX1018; WITH NUT, Mnfr: STAHL Mnfr Part No: 138580STAHL
    50BUCKET, CONVEYOR: CAPACITY 18 TON, MATERIAL SS ASTM A240 GR 304, Mnfr: DONG YANG P & F Mnfr Part No: DY-BUCKET-18T, Suppl: TECNICAS REUNIDAS S.A. Suppl P/N: UNK, MANDRG: VD-PK-56402-0016 Rev: 1 Item: 15, VD-PK-56402-0022 Rev: 1 Item: 15, VD-PK-56402-0019 Rev: 1 Item: 15DONG YANG P & F
    20BULB: TYPE INCANDESCENT, VOLTAGE 6.5 V, FFT:RATING: 6.5 V 300 MA; FOR VACUUM CONTACTOR ELECTRIC FIRE PUMP CONTROLLER, MNFR: METRON, INC. MNFR PART NO: 1688METRON INC.
    23BURR: SHAPE DIAMOND, CUT LG 7/8 IN, SHANK DIAMETER 1/4 IN , MATERIAL CARBIDE, FFT: SHANK TYPE: C; ANGLE: 28 DEG, Mnfr: MENLO USA Mnfr Part No: COD SM-5/01111MENLO USA
    55BUSH: SIZE DIA 2.4 MM, APPLICATION TIG WELDING TORCH, Mnfr: KEMPPI OY, FINLAND Mnfr Part No: 7990642,  as end user needKEMPPI OY, FINLAND
    22BUSH: SIZE OD 32 X LG 80 MM, APPLICATION SEA CONTAINER AND TANKER LOADING PACKAGE, FFT:, MNFR: DONG YANG P & F MNFR PART NO: LMH-L-20DONG YANG P & F
    48BUSHING: TYPE HEX HEAD; SCREWED NPT, SIZE 1/2 X 1/4 IN, MATERIAL MI ASTM A197, STANDARD ANSI B16.14, FFT: 150 LB; GALVANIZING TO ASTM A 153 CLASS A-
    49BUSHING: TYPE HEX HEAD; SCREWED NPT, SIZE 3/4 X 1/4 IN, MATERIAL MI ASTM A197, STANDARD ANSI B16.14, FFT: 150 LB; GALVANIZING TO ASTM A 153 CLASS A-
    24CABLE, COAXIAL: TYPE QUAD SHIELDED, FFT: WITH RG-6 PARA CONTROLNET (305 METERS); CABLE LENGH 20CM, Mnfr: ALLEN BRADLEY Mnfr Part No: 1786-RG6X10, Suppl: YOKOGAWA ELECTRIC CORPORATION. Suppl P/N: UNK, MANDRG: XXX-65W-?.-SHEET 1004/1005 Rev: 0 Item: UNKALLEN BRADLEY
    50CABLE, COMMUNICATIONS: CONDUCTOR (3) CORE STRANDED CU, CONDUCTOR RATING 2.5 MM2, INSULATION BLACK PVC, Mnfr: LEONI KERPEN GMBH Mnfr Part No: P2.5A3CLEONI KERPEN GMBH
    50CABLE, COMMUNICATIONS: CONDUCTOR (3) CORE STRANDED CU, CONDUCTOR RATING 4 MM2, INSULATION PVC BLACK, Mnfr: LEONI KERPEN GMBH Mnfr Part No: P4.0A3CLEONI KERPEN GMBH
    50CABLE, COMMUNICATIONS: CONDUCTOR 1 PAIR, CONDUCTOR RATING 18 AWG, Mnfr: LEONI KERPEN GMBH Mnfr Part No: LA1LEONI KERPEN GMBH
    50CABLE, COMMUNICATIONS: CONDUCTOR 4 PAIR, CONDUCTOR RATING 22 AWG, INSULATION PVC BLACK, TYPE TELEPHONE, Mnfr: LEONI KERPEN GMBH Mnfr Part No: CLA4LEONI KERPEN GMBH
    150CABLE, COMMUNICATIONS: CONDUCTOR 50 PAIR, CONDUCTOR RATING 22 AWG, INSULATION PVC BLACK, TYPE ARMOURED TELEPHONE, Mnfr: LEONI KERPEN GMBH Mnfr Part No: CLA50LEONI KERPEN GMBH
    50CABLE, COMMUNICATIONS: CONDUCTOR 8 PAIR, CONDUCTOR RATING 0.75 MM2, INSULATION PVC GREEN, FFT: THERMOCOUPLE, Mnfr: UNKNOWN Mnfr Part No: KA8UNKNOWN
    970CABLE, ELECTRICAL: CONDUCTOR SIZE 10 MM2, INSULATION HMWPE RED, STANDARD CE, FFT:, MNFR: CORRPRO ARABIA, KSA MNFR PART NO: UNKCORRPRO ARABIA, KSA
    599CABLE, ELECTRICAL: CONDUCTOR SIZE 6 MM2, INSULATION HMWPE BLACK, FFT:, MNFR: CORRPRO ARABIA, KSA MNFR PART NO: UNKCORRPRO ARABIA, KSA
    1000CABLE, ELECTRICAL: CONDUCTOR SIZE 6 MM2, INSULATION XLPE BLACK/WHITE, COVERING SWA/PVC JACKET, CONDUCTOR 2 CORE CU, FFT:RATING: 0.6/1KV, FLAME RETARDANT, TERMITE RESISTANT SUNLIGHT AND OIL RESISTANT, MNFR: RIYADH CABLES MNFR PART NO: UNKRIYADH CABLES
    500CABLE, ELECTRICAL: TYPE CONTROL, CONDUCTOR SIZE 4 MM2, INSULATION XLPE BLACK/WHITE, COVERING SWA/PVC JACKET, CONDUCTOR 12 CORE CU, FFT:RATING: 0.6/1KV, FLAME RETARDANT, TERMITE RESISTANT SUNLIGHT AND OIL RESISTANT, MNFR: RIYADH CABLES MNFR PART NO: UNKRIYADH CABLES
    500CABLE, ELECTRICAL: TYPE UNARMOURED, CONDUCTOR SIZE 2.5 MM2, INSULATION XLPE BLACK/WHITE, COVERING PVC JACKET, CONDUCTOR 2 CORE CU, FFT:RATING: 0.6/1KV, FLAME RETARDANT, TERMITE RESISTANT SUNLIGHT AND OIL RESISTANT, MNFR: RIYADH CABLES MNFR PART NO: UNKRIYADH CABLES
    45CABLE, POWER: TYPE ARMOURED, FFT:  SIZE DIA 5MM X LG 12M, Mnfr: SARTORIUS AGSARTORIUS AG
    100CABLE, POWER: TYPE HOOK-UP, CONDUCTOR SIZE 14AWG; 2.5MM2, INSULATION PVC WHITE, CONDUCTOR STRANDED TINNED CU, STANDARD CE; CSA; UL, FFT: LENGTH: 100M, Mnfr: LAPP LTD Mnfr Part No: 416 05 05, Suppl: YOKOGAWA NEDERLAND BV Suppl P/N: UNKLAPP LTD
    912CABLE, POWER: TYPE SELF REGULATING HEATING, CONDUCTOR SIZE 14 AWG, INSULATION XLPE, COVERING PVC, CONDUCTOR ANNEALED PLAIN CU, STANDARD CSA; FM, FFT: TEMPERATURE ID (T3): 392 DEG F; VOLTAGE: 100-277VAC, Mnfr: TYCO THERMAL CONTROLS Mnfr Part No: 10XTV2-CT-T3TYCO THERMAL CONTROLS
    24CABLE: TYPE SELF REGULATING HEATING, SIZE LG 54.6 M, STANDARD FM/UL, , MNFR: THERMON MANUFACTURING COMPANY MNFR PART NO: HTSX 9-2 OJTHERMON MANUFACTURING COMPANY
    122CABLE: TYPE SELF REGULATING HEATING, SIZE WD 11.8 X THK 4.5 MM, MATERIAL COPPER, STANDARD CSA; FM, FFT: CATALOG NO : 10QTVR2-CT, SUPPLY VOLTAGE: 230VAC; CONDUCTOR SIZE: 1.4SQ.MM , Mnfr: TYCO THERMAL CONTROLS Mnfr Part No: 391991-000TYCO THERMAL CONTROLS
    17CAGE: TYPE BAG RETAINER, SIZE DIA 800 X HT 3250 MM, MATERIAL SS 304, FFT: FOR VACUUM FILTER, Mnfr: BOSS Mnfr Part No: UNK, Mnfr: DAEGA POWDER SYSTEMS CO.LTD. Mnfr Part No: DG0004BOSS
    60CAP: TYPE RAILING END, MATERIAL 230A, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: 118045, MANDRG: VP-2600-206-001-BR-26851 A-G-020/22 Rev: 0, 1 Item: PA, PB-9/13, VP-2600-206-001-BR-26811 A-G-025/27 Rev: 0, 1 Item: PA, PB-9JANSENS & DIEPERINK B.V.
    50CAP: TYPE SAMPLE BOTTLE, SIZE DIA 28 MM, MATERIAL AL UNDERCAP AND PHENOL OVERCAP, Mnfr: DOVIANUS B.V. Mnfr Part No: 1970500DOVIANUS B.V.
    50CAP: TYPE SAMPLE BOTTLE, SIZE DIA 45 MM, MATERIAL AL UNDERCAP AND PHENOL OVERCAP, Mnfr: DOVIANUS B.V. Mnfr Part No: 1970700DOVIANUS B.V.
    43CAPACITOR: TYPE HIGH PRESSURE SODIUM, VOLTAGE 300 V, STANDARD CSA; UL; ANSI S62, FFT: ADVANCE CAPCITOR7C070L30RA, Mnfr: ADVANCE Mnfr Part No: 7C070L30RA, Mnfr: GENERAL ELECTRIC APPLIANCES Mnfr Part No: UNKGENERAL ELECTRIC APPLIANCES
    20CAPACITOR: TYPE POLYPROPYLENE FILM, CAPACITANCE 0.5 MFD, VOLTAGE 3500 VDC, STYLE CYLINDRICAL, SIZE DIA 43.5 X LG 116 MM, CONNECTION SCREW, FFT: THREAD AT BOTH ENDS; FOR SNUBBER AND MEDIUM CURRENT APPLICATION, Mnfr: HK FILM CAPACITOR COM. Mnfr Part No: UNK,  Reference No: CA-385,  Model/Machine No: STP-01A,  MTC REQUIRED ALONG WITH MATERIALHK FILM CAPACITOR COM.
    34CARTRIDGE: TYPE FILTER, FFT: FOR SOLID INTERCEPTOR PACKAGE,  Reference No: AES-1-31-20120-
    24CASTER: TYPE ROLLER, SIZE DIA 200 MM, MATERIAL NYLON, FFT:WITH ROLLER BEARING, FOR PUSH TROLLEY-
    18CELL: TYPE OPTICAL GLASS, SIZE LG 40 X HT MM, FFT: PATH LENGTH 100 MM; FOR USE IN INSTRUMENTS WITH NON-HEATED SAMPLES (UP TO 40 DEG C), Mnfr: THE TINTOMETER LIMITED Mnfr Part No: 606030 W600/OG/100,  Reference No: W600,  Reference No: FS, 880, 950 AND 995THE TINTOMETER LIMITED
    50CIRCLIP: FFT: 5000-87H, Mnfr: FMC Mnfr Part No: 70V450022769FMC
    32CIRCLIP: MATERIAL SS PH15-7MO, Mnfr: CLYDE UNION LTD Mnfr Part No: RR5108-100HNC07, MANDRG: DBB-20116 Rev: 0 Item: 2520CLYDE UNION LTD
    25CIRCLIP: TYPE EXTERNAL, SIZE DIA 32 X THK 1.5 MM, MATERIAL STEEL, STANDARD DIN 471, Mnfr: LEWA GERMANY Mnfr Part No: 071521.0130LEWA GERMANY
    23CLAMP: SIZE WD 30 X LG 40 X THK 2 MM, MATERIAL SS DIN WN 1.4404, FFT: SHAPE S, RPB, Mnfr: SULZER CHEMTECH AG Mnfr Part No: 10007883, Mnfr: SULZER CHEMTECH AG Mnfr Part No: 106.227.043.001SULZER CHEMTECH AG
    721CLAMP: TYPE 1-WAY; UNIVERSAL, SIZE 15-25 MM, MATERIAL SS 410S, FFT:WITH BOLT (SIZE: DIA M10 X LG 60 MM); FOR COLUMN, MNFR DRG 10-07091-03P REV: 0 ITEM NO: UNK-
    2219CLAMP: TYPE 1-WAY; UNIVERSAL, SIZE 6-14 MM, MATERIAL SS 410S, FFT: TYPE II, BOLT SIZE: DIA M10 X LG 60 MM, W/SLOT (TACK WELD), Mnfr: SULZER LTD. Mnfr Part No: UNK, Mnfr Drg 10-07088-4P & 14P Rev: 0 Item No: 301, 435TSULZER LTD.
    1883CLAMP: TYPE 1-WAY; UNIVERSAL, SIZE WD 26 X LG 80 X HT 34 MM, MATERIAL SS 410S, FFT: TYPE II ; W ITH BOLT (SIZE: DIA M10 X LG 60 MM); 4 PASS ODD TRAYS 1 U / I 99, Mnfr: SULZER LTD. Mnfr Part No: UNK, Mnfr Drg 10-07088-03P & 13P Rev: 0 Item No: 303, 435TSULZER LTD.
    47CLAMP: TYPE BOTTOM COLUMN, MATERIAL SS 304, FFT: WITH ONE HOLE DIA: 11MM; FOR UNIVERSAL CLAMP, Mnfr: SULZER LTD. Mnfr Part No: UNK, Mnfr Drg 10.06553-117P Rev: 0 Item No: 020SULZER LTD.
    43CLAMP: TYPE BTC, FFT: BTC# Y SERIES; FOR M10 SIZE, Mnfr: KOCH-GLITSCH Mnfr Part No: 902-410G03KOCH-GLITSCH
    46CLAMP: TYPE L, SIZE THK 2.5 IN, MATERIAL SS 316L, FFT: PART OF FLEXITRAY SCRUBBER NOZZLE INTERNAL-
    18CLAMP: TYPE RING, FFT: WITH RETRACTABLE HOLDER; APPLICATION FOR COMBINED PH/REFERENCE ELECTRODE,, Mnfr: YOKOGAWA NEDERLAND BV Mnfr Part No: K1520KD,  Equip Model No: PR20 Mnfr: YOKOGAWA NEDERLAND BVYOKOGAWA NEDERLAND BV
    23CLAMP: TYPE TUBING, SIZE 1 IN, Mnfr: PARKER HANNIFIN UK LTD Mnfr Part No: TBC-1-1/4 (1)PARKER HANNIFIN UK LTD
    48CLAMP: TYPE TUBING, SIZE 3/4 IN, Mnfr: PARKER HANNIFIN UK LTD Mnfr Part No: TBC-3/4PARKER HANNIFIN UK LTD
    49CLAMP: TYPE TUBING, SIZE OD 3/4 IN, Mnfr: PARKER HANNIFIN UK LTD Mnfr Part No: TBC-1 (3/4)PARKER HANNIFIN UK LTD
    23CLAMP: TYPE TUBING, SIZE TUBE OD 3/4 IN, Mnfr: PARKER HANNIFIN UK LTD Mnfr Part No: TBC-1-1/4 (3/4)PARKER HANNIFIN UK LTD
    26CLAMP: TYPE UNIVERSAL, MATERIAL SS DIN WN 1.4307, FFT:TWO WAY 5-19, MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.216.144.102SULZER CHEMTECH AG
    25CLAMP: TYPE UNIVERSAL, MATERIAL SS DIN WN 1.4404, FFT:WITH BOLT (5-19), MNFR: SULZER CHEMTECH AG MNFR PART NO: 000.006.170.004SULZER CHEMTECH AG
    22CLAMP: TYPE Y-BOTTOM TRAY, MATERIAL DUPLEX SS, Mnfr: KOCH-GLITSCH Mnfr Part No: 843-205G20KOCH-GLITSCH
    62CLAMP: TYPE Y-BOTTOM TRAY, SIZE THK 3 MM, MATERIAL DUPLEX SS, Mnfr: KOCH-GLITSCH Mnfr Part No: 902-205G03KOCH-GLITSCH
    220CLIP, ELECTRICAL: TYPE FLAT CABLE HOLDER, MATERIAL CU, CONDUCTOR SIZE DIA 10 MM, FFT: FOR USE WITH HOT PITCH, ROOFING COMPOUND OR COMMERCIAL ADHESIVE ON BUILT UP ROOF WITH BASE; ADHESIVE, Mnfr: FURSE NOTTINGHAM UK Mnfr Part No: CP915FURSE NOTTINGHAM UK
    1016CLIP: TYPE G-GLIP, MATERIAL CS GALV, Mnfr: CERREY, SA DE CV Mnfr Part No: GG-1BCERREY, SA DE CV
    45COLLAR: TYPE HP ANTI VIBRATION COLLET CONE ENDED, SIZE 3/8 IN, FFT: HP 60000 PSI SS-316 AE  FOR USE IN LDPE, Mnfr: AUTOCLAVE ENGINEERS INC Mnfr Part No: ACL60,  Suppl: ABDUL KAREEM TRADING EST. Suppl Part No: UNKNOWNAUTOCLAVE ENGINEERS INC
    50COLLAR: TYPE RING, SIZE OD 18 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: HK013014/150BHDT GMBH
    50COLLAR: TYPE RING, SIZE OD 18 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: HK013014/271BHDT GMBH
    70COLLAR: TYPE RING, SIZE OD 18 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: HK013014/540BHDT GMBH
    50CONNECTOR, COMMUNICATIONS: TYPE QUICK CONNECT, REWIREABLE, FFT: WITH (2) POLE, Mnfr: J.M. CANTY INC Mnfr Part No: V480J.M. CANTY INC
    40CONNECTOR, COMMUNICATIONS: TYPE RJ45, CONDUCTOR 24-22 AWG, STANDARD IEC; UL, FFT: CATEGORY: 6, COLOR: ORANGE, Mnfr: SYSTIMAX Mnfr Part No: 700206683, Suppl: TRANSTEL ENGINEERING PTE. LTD. Suppl P/N: UNKSYSTIMAX
    25CONNECTOR, ELECTRICAL: TYPE SPRING CAGE, CONDUCTOR 24-12AWG; 0.2-4MM2, SIZE WD 5.2 X LG 141 X HT 51 MM, CONNECTION 2, INSULATION PA, ELECTRICAL RATING 500VAC 24A, STANDARD IEC 60947-7-1; UL, FFT: COLOR: GREY; LEVELS: 2, Mnfr: PHOENIX CONTACT Mnfr Part No: 3031047, Suppl: YOKOGAWA NEDERLAND BV Suppl P/N: UNK, Model/Machine No: ZPV 2.5 Mnfr: PHOENIX CONTACTPHOENIX CONTACT
    75CONNECTOR, LUG: CONDUCTOR 0.25-1.5 MM2, CONDUCTOR CONNECTION PUSH ON FEMALE; CRIMPED, MATERIAL TINNED BRASS, INSULATION PVC, FFT:CONTACT SURFACE WD 6.3 MM; CONTACT SURFACE LG 6.8 MM; OVERALL LG 22 MM; INSULATION LG 22 MM; INSULATION COLOUR RED; ANTI-VIBRATION SLEEVE, MNFR: B&M MNFR PART NO: BM 00191B&M
    24CONNECTOR, LUG: CONDUCTOR 1; 50 MM2, CONDUCTOR CONNECTION CRIMP, MATERIAL COPPER TIN PLATED, TERMINATION END (1) 10 MM, FFT: FOR CABLES AND ACCESSORIES, Mnfr: ARAB ENGINEERS Mnfr Part No: UNKNOWN, Suppl: RS COMPONENTS LTD Suppl P/N: 531-891, CATALOGUE: RS 1999 PG 238 Rev: UNKARAB ENGINEERS
    84CONNECTOR, LUG: TYPE CABLE, MATERIAL COPPER, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: 1-1099898-0RAYCHEM TYCO CORPORATION
    20CONNECTOR, LUG: TYPE COMPRESSION, CONDUCTOR 1250 KCMIL, MATERIAL COPPER, STANDARD UL, FFT: FOUR HOLE HYLUG CODE CONDUCTOR; STUD HOLE: 1/2 IN; STUD HOLE SPACING: 1.75 IN; TONGUE WIDTH: 3 IN; OA LENGTH: 7.44 IN; TONGUE ANGLE: STRAIGHT; WIRE STRIP LENGTH: 3-1/4 IN, Mnfr: BURNDY Mnfr Part No: YA454NBURNDY
    20CONNECTOR, LUG: TYPE COMPRESSION, CONDUCTOR 500 KCMIL, MATERIAL CU, STANDARD UL, FFT: FOUR HOLE HYLUG CODE CONDUCTOR; STUD HOLE: 1/2 IN; STUD HOLE SPACING: 1.75 IN; TONGUE WIDTH: 3 IN; OA LENGTH: 6.33 IN; TONGUE ANGLE: STRAIGHT; WIRE STRIP LENGTH: 2-1/2 IN., Mnfr: BURNDY Mnfr Part No: YAB344NBURNDY
    53CONNECTOR, LUG: TYPE COMPRESSION, CONDUCTOR 630 MM2, STANDARD CSA, UL, FFT: WITH (2) HOLE; SIZE: LG 7.44 X THK 0.38 IN, Mnfr: BURNDY Mnfr Part No: YA45-2N, Suppl: WHOLESALE ELECTRIC SUPPLY CO Suppl P/N: UNKBURNDY
    30CONNECTOR, LUG: TYPE HEAVY DUTY, CONDUCTOR 1; 35 MM2, CONDUCTOR CONNECTION CRIMP, MATERIAL COPPER TIN PLATED, TERMINATION END (1) 8 MM, FFT: FOR CABLES AND ACCESSORIES, Mnfr: ARAB ENGINEERS Mnfr Part No: UNKNOWN, Suppl: RS COMPONENTS LTD Suppl P/N: 241-4631, CATALOGUE: RS 1999 PG 238 Rev: UNKARAB ENGINEERS
    900CONNECTOR, LUG: TYPE SLEEVE END, CONDUCTOR 0.75 MM2, CONDUCTOR CONNECTION CRIMPED, MATERIAL COPPER TINNED, INSULATION NONE, STANDARD DIN 46228, FFT: ID 1.4 X OD 2.5 X LG 6, Mnfr: SIEMENS AG Mnfr Part No: 5GT6200SIEMENS AG
    17CONNECTOR: FFT: FOR EMULSION SPRAYING SYSTEM; CMC COLD REVERSING MILL, Mnfr: FESTO Mnfr Part No: QSY-6, DRAWING: HAF.KK2.22226-M0400/STL-000/50 Rev: 0 Item: POS 50, Reference No: KK2-39132 Mnfr: VAIFESTO
    51CONNECTOR: TYPE AI MOTHERBOARD SPARE, Mnfr: PHOENIX CONTACT Mnfr Part No: Y98837PHOENIX CONTACT
    40CONNECTOR: TYPE IDC INSERT, FFT: PORT TYPE: RJ45, CATEGORY 6, Mnfr: SYSTIMAX Mnfr Part No: MGS400-112SYSTIMAX
    61CONTACT, AUXILIARY: CONTACT ARRANGEMENT 2NC, VOLTAGE 690 V, AMPERAGE 10 A, STANDARD UL,CE,CSA, FFT: S1/2; MOUNT: SIDE; NEMA SIZE 00-2, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS5CUTLER HAMMER
    46CONTACT, AUXILIARY: CONTACT ARRANGEMENT 4NO, VOLTAGE 690 V, AMPERAGE 10 A, STANDARD UL, CSA, FFT: S1/2; MOUNT: TOP; NEMA SIZE 00 - 2, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGT13CUTLER HAMMER
    21CONTACT, AUXILIARY: FFT: USED FOR CONTACTOR (100-C23KJ10), Mnfr: ALLEN BRADLEY Mnfr Part No: 100-FA22ALLEN BRADLEY
    27CONTACT, AUXILIARY: TYPE CONTACTOR, CONTACT ARRANGEMENT 1NO, VOLTAGE 415 VAC, AMPERAGE 10 A, STANDARD IEC, FFT: FOR FREEDOM SERIES CONTACTORS. A#30JUN.98, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS20CUTLER HAMMER
    34CONTACT, AUXILIARY: TYPE CONTACTOR, CONTACT ARRANGEMENT 2NO, VOLTAGE 415 VAC, AMPERAGE 10 A, STANDARD IEC, FFT: SIDE MOUNTED FOR FREEDOM SERIES CONTACTORS. A#30JUN.98, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS4CUTLER HAMMER
    38CONTACT, AUXILIARY: TYPE INTERLOCK, CONTACT ARRANGEMENT 1NO-1NC, VOLTAGE 690 VAC, AMPERAGE 10 A, STANDARD CE; CSA; UL, FFT: FREEDOM SERIES; TOP MOUNTED, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS22CUTLER HAMMER
    21CONTACT, AUXILIARY: TYPE INTERLOCK, CONTACT ARRANGEMENT 1NO-1NC, VOLTAGE 690 VAC, AMPERAGE 10 A, STANDARD CE; CSA; UL, FFT: FREEDOM SERIES; TOP MOUNTED, Mnfr: CUTLER-HAMMER Mnfr Part No: C320KGS32CUTLER HAMMER
    29CONTACT, AUXILIARY: TYPE SWITCH, CONTACT ARRANGEMENT 1NO-1NC, VOLTAGE 277 VAC, AMPERAGE 2 A, STANDARD UL, FFT:OC-
    52CORD, COMMUNICATIONS: TYPE COPPER PATCH, LENGTH 1 M, CONDUCTOR 1 AWG, CONNECTORS 110GS, STANDARD IEC, FFT: CORDAGE TYPE: 1074D; WIRING SCHEME: T568B; CORD COLOR: WHITE; MODULAR JACK COLOR: WHITE, Mnfr: SYSTIMAX Mnfr Part No: CPC8862-03M001SYSTIMAX
    19CORD, COMMUNICATIONS: TYPE COPPER PATCH, LENGTH 1 M, CONDUCTOR 4, CONNECTORS GS8E RJ45, STANDARD IEC CATEGORY 6, FFT: CORDAGE TYPE: 1074E GS3; WIRING SCHEME: T568B; MODULAR JACK COLOR: WHITE; CORD COLOR: WHITE, Mnfr: SYSTIMAX Mnfr Part No: CPC3312-08M001SYSTIMAX
    359CORD, COMMUNICATIONS: TYPE COPPER PATCH, LENGTH 1 M, CONDUCTOR 4, CONNECTORS GS8E RJ45, STANDARD IEC; CE; UL, FFT: CORDAGE TYPE: 1074E GS3; WIRING SCHEME: T568B; CORD COLOR: DARK GRAY; CLEAR; CATEGORY: 6, Mnfr: SYSTIMAX Mnfr Part No: CPC3312-03M001, Suppl: TRANSTEL ENGINEERING PTE. LTD. Suppl P/N: UNK, CATALOGUE: CPC3312 Rev: 0 Item: UNKSYSTIMAX
    45CORD, COMMUNICATIONS: TYPE COPPER PATCH, LENGTH 6 M, CONDUCTOR 4, CONNECTORS GS8E RJ45, STANDARD IEC; CE; UL, FFT: CORDAGE TYPE: 1074E GS3; WIRING SCHEME: T568B; CORD COLOR: DARK GRAY; CLEAR; CATEGORY: 6, Mnfr: SYSTIMAX Mnfr Part No: CPC3312-03M006, Suppl: TRANSTEL ENGINEERING PTE. LTD. Suppl P/N: UNK, CATALOGUE: CPC3312 Rev: 0 Item: UNKSYSTIMAX
    74CORD, COMMUNICATIONS: TYPE FIBRE OPTIC PATCH, LENGTH 1 M, CONDUCTOR (2), CONNECTORS LC DUPLEX, STANDARD IEC, FFT: FIBER TYPE: TERA SPEED SINGLE MODE, Mnfr: SYSTIMAX Mnfr Part No: FPCWLCLC22-RF003, Suppl: TRANSTEL ENGINEERING PTE. LTD. Suppl P/N: UNKSYSTIMAX
    20CORD, ELECTRICAL: TYPE DOUBLE ENDED MICRO CHANGE/DEVICE NET, STANDARD CSA; UL, FFT: GENDER: MALE/MALE-FEMALE; POLE: 5; RATING: 250VAC/DC 4A, Mnfr: MOLEX Mnfr Part No: 1300280028MOLEX
    22CORD, ELECTRICAL: TYPE DOUBLE ENDED MICRO CHANGE/DEVICE NET, STANDARD CSA; UL, FFT: POLE: 5; GENDER: MALE-MALE/FEMALE; RATING: 250VAC/DC 4A, Mnfr: MOLEX Mnfr Part No: 1300280033MOLEX
    22CORD, ELECTRICAL: TYPE DOUBLE ENDED MINI CHANGE/DEVICE NET, STANDARD CSA; UL, FFT: POLE: 5; GENDER: MALE/MALE-FEMALE; RATING: 250VAC/DC 4A, Mnfr: MOLEX Mnfr Part No: 1300250067MOLEX
    21CORD, ELECTRICAL: TYPE DOUBLE ENDED MINI CHANGE/DEVICENET, STANDARD CSA; UL, FFT: POLE: 5; GENDER: MALE/MALE-FEMALE; RATING: 250VAC/DC 4A, Mnfr: MOLEX Mnfr Part No: 1300250061MOLEX
    50CORD: TYPE ELASTIC, SIZE DIA 6 X LG 1.45 MM, MATERIAL PERBUNAN, FFT: QUALIT T PBN DARK; FOR BAGGING AND  PALLETISING PACKAGE, Mnfr: WINDMOLLER & HOLSCHER KG Mnfr Part No: 03025004WINDMOLLER & HOLSCHER KG
    37COUPLING, HOSE: SIZE 1/2 IN, CONNECTION FNPT, MATERIAL MALLEABLE IRON, RATING 150 PSI,  Suppl: MAC MASTER Suppl Part No: 5344K29-
    37COUPLING, HOSE: SIZE 1/2 IN, CONNECTION FNPT, MATERIAL STEEL ZINC PLATED, RATING 300 PSI,  Suppl: MAC MASTER Suppl Part No: 6534K43-
    37COUPLING, HOSE: SIZE 1/2 IN, CONNECTION FNPT, MATERIAL STEEL ZINC PLATED, RATING 300 PSI,  Suppl: MAC MASTER Suppl Part No: 6536K51-
    37COUPLING, HOSE: SIZE 1/2 IN, CONNECTION MNPT, MATERIAL MALLEABLE IRON, RATING 150 LB,  Suppl: MAC MASTER Suppl Part No: 5344K24-
    37COUPLING, HOSE: SIZE 1/4  IN, CONNECTION NPT, MATERIAL MALLEABLE IRON, RATING 150 LB,  Suppl: MAC MASTER Suppl Part No: 5344K27-
    37COUPLING, HOSE: SIZE 1/4 IN, CONNECTION FNPT, MATERIAL SS 303, RATING 300 PSI,  Suppl: MAC MASTER Suppl Part No: 6718K52 -
    37COUPLING, HOSE: SIZE 1/4 IN, CONNECTION MNPT, MATERIAL SS 303, RATING 300 PSI,  Suppl: MAC MASTER Suppl Part No: 6718K26-
    37COUPLING, HOSE: SIZE 1/4 IN, CONNECTION NPT, MATERIAL MALLEABLE IRON, RATING 150  LB,  Suppl: MAC MASTER Suppl Part No: 5344K22-
    37COUPLING, HOSE: SIZE 3/4 IN, CONNECTION MNPT, MATERIAL MALLEABLE IRON, RATING 150 PSI,  Suppl: MAC MASTER Suppl Part No: 5344K25-
    20COUPLING, PIPE: SIZE 1/4 IN, CONNECTION FNPT, MATERIAL SS 316, RATING 689 BAR, , MNFR: SWAGELOK  MNFR PART NO: SS-4-HCG-10K,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESWAGELOK
    104COUPLING: SIZE 1/2 FNPT IN, MATERIAL CS ASTM A105, FFT: RATING: 3000LBS-
    19COVER: APPLICATION FLANGE BEARING, TYPE DUST, MATERIAL CS, FFT: FOR EQUIP :NM9058-1, NM-9062-1/-2, NM-9061; PO NO: N8-M3-PO-90-2201SP, Mnfr: MASCHINENFABRIK MOLLERS GMBH Mnfr Part No: 100746, DRAWING: DTF-20201Z-4E Rev: 0 Item: POS 3.2.1MASCHINENFABRIK MOLLERS GMBH
    17COVER: APPLICATION TRANSMITTER, TYPE SIGHT GLASS, FFT: RED COLOR; WITH O-RING (P/N: F9341JP), Mnfr: YOKOGAWA UK LTD Mnfr Part No: F9341FSYOKOGAWA UK LTD
    35COVERALL: MATERIAL PVC COATED NYLON, SIZE M, TYPE CHEMICAL PROTECTION, FFT: HEAT SEALED SEAMS; SNAP FRONT JACKET, 30 IN LONG WITH  HOOD,  Suppl: MCMASTER-CARR Suppl Part No: 5892T8-
    35COVERALL: MATERIAL PVC COATED NYLON, SIZE S, TYPE CHEMICAL , FFT: HEAT SEALED SEAMS; SNAP FRONT JACKET, HOODED,  Suppl: MCMASTER-CARR Suppl Part No: 5892T8-
    197CROSS, TUBE: SIZE 1/2 IN, CONNECTION COMPRESSION, MATERIAL BRASS ASTM B16 ALLOY 360, FFT: TYPE: UNION, Mnfr: HY-LOK CORP. Mnfr Part No: CXA-8-BRASSHY-LOK CORP.
    197CROSS, TUBE: SIZE 1/4 IN, CONNECTION COMPRESSION, MATERIAL BRASS ASTM B16 ALLOY 360, FFT: TYPE: UNION, Mnfr: HY-LOK CORP. Mnfr Part No: CXA-4-BRASSHY-LOK CORP.
    43CYLINDER, GRADUATED: SIZE 100 ML, MATERIAL POLYMETHYLPENTENE, GRADUATIONS 1.0 ML, FFT: LARGE POUR SPOUT AND HEAT RESISTANCE; AUTOCLAVABLE; 12 EA, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-06134-45,  Model/Machine No: 3665-0100COLE-PARMER INSTRUMENT COMPANY
    17CYLINDER, GRADUATED: SIZE 250 ML, MATERIAL POLYPROPYLENE, GRADUATIONS 2.0 ML, FFT: CHEMICAL RESISTANT; LARGE, RIBBED BASE; AUTOCLAVABLE, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-06135-52,  Model/Machine No: 3664-0250COLE-PARMER INSTRUMENT COMPANY
    37CYLINDER, GRADUATED: SIZE 50 ML, MATERIAL POLYPROPYLENE, GRADUATIONS 1.0 ML, FFT: CHEMICAL RESISTANT; LARGE, RIBBED BASE; AUTOCLAVABLE, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-06135-32,  Model/Machine No: 3664-0050COLE-PARMER INSTRUMENT COMPANY
    17CYLINDER, GRADUATED: SIZE 500 ML, MATERIAL POLYPROPYLENE, GRADUATIONS 5.0 ML, FFT: CHEMICAL RESISTANT; LARGE, RIBBED BASE; AUTOCLAVABLE, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-06135-62,  Model/Machine No: 3664-0500COLE-PARMER INSTRUMENT COMPANY
    22DETECTOR, FIRE PROTECTION: TEMPERATURE RATING 325 DEG F, FFT: EEXD W/J BOX, Mnfr: DET-TRONICS Mnfr Part No: 000120-077DET-TRONICS
    17DETECTOR, FIRE PROTECTION: TYPE PHOTOELECTRIC, FFT:CONSISTS OF SMOKE DETECTOR HEAD AND BASE, MNFR: KIDDE FIRE SYSTEMS MNFR PART NO: 721U+702UFENWAL
    25DETECTOR, LEAK: TYPE WATER VAPOUR (H2O), CONTAINER TUBE, FFT: MEASURING RANGE: 1 TO 18mg/L, NUMBER OF PUMP STROKES: 1, CORRECTION FACTOR 1, SAMPLING TIME:1 MINUTE PER PUMP STROKE, Mnfr: GASTEC,JAPAN Mnfr Part No: UNK, Model/Machine No: NO-6GASTEC,JAPAN
    25DETECTOR, LEAK: TYPE WATER VAPOUR (H2O), CONTAINER TUBE, FFT: MEASURING RANGE: 18 TO 32mg/L, NUMBER OF PUMP STROKES: 1/2, CORRECTION FACTOR BY SCALE, SAMPLING TIME:1 MINUTE PER PUMP STROKE, Mnfr: GASTEC,JAPAN Mnfr Part No: UNK, Model/Machine No: NO-6GASTEC,JAPAN
    25DETECTOR, LEAK: TYPE WATER VAPOUR (H2O), TUBE, FFT: MEASURING RANGE: 0.5 TO 1mg/L, NUMBER OF PUMP STROKES: 2, CORRECTION FACTOR 1/2, SAMPLING TIME:1 MINUTE PER PUMP STROKE, Mnfr: GASTEC,JAPAN Mnfr Part No: UNK, Model/Machine No: NO-6 Mnfr: GASTEC,JAPANGASTEC,JAPAN
    17DEVICE: TYPE STREAM SHAPER, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, OEM: AKRON BRASS CO. USA OEM Part No: 118737, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 5,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    20DIODE: TYPE BLOCKING, AMPERAGE 1 A, FFT: BLADE; ATM MOUNT, Mnfr: J.M. CANTY INC Mnfr Part No: L119-3J.M. CANTY INC
    17DIODE: TYPE CLAMPING, FFT:, OEM: HYUNDAI HEAVY INDUSTRIES OEM PART NO: 5220280808, MNFR: SEMIKRON INTERNATIONAL GMBH  MNFR PART NO: SK1/16SEMIKRON INTERNATIONAL GMBH 
    20DISC, BRAKE: SIZE OD 150 X THK 10 MM, FFT: FOR 10MT I.G. COMPRESSOR HOIST YALE, Mnfr: YALE EUROPE Mnfr Part No: 6461033-12, Model/Machine No: 319617A/B, Reference No: KM ID: 560075, Serial No: DEW10X29RT16D4YALE EUROPE
    22DISC: TYPE SUPPORTING, SIZE ID 45 X OD 50 THK 3 MM, MATERIAL NBR, Mnfr: UNKNOWN Mnfr Part No: 110113, Suppl: COPERION WAESCHLE GMBH & CO KG Suppl P/N: 003153, Equip/Tag Model No: ZVD 250.1-9; 5-AC, Equip/Tag Serial No: 123391, 123392, 123393UNKNOWN
    33DISH: TYPE EVAPORATING, SIZE OD 90 X HT 50 MM, MATERIAL GLASS, FFT: WITH LIP AND SPOUT, AUTOCLAVE; CAPACITY: 170 ML , OEM: COLE-PARMER INSTRUMENT COMPANY OEM Part No: 34586-22COLE-PARMER INSTRUMENT COMPANY
    29DISPLAY UNIT, DATA: FFT:SOURCE:YOKAGAWA TRANSMITTER., MNFR: YOKOGAWA ELECTRIC CORPORATION MNFR PART NO: F9167DA, SUPPL: ETH SUPPL PART NO: F9167DA, DRAWING CMPL 01C22A01-02E POS YOKOGAWA ELECTRIC CORPORATION
    33DISTRIBUTOR: TYPE ASI-T, FFT:   , Mnfr: MASCHINENFABRIK BEUMER GMBH & CO KG Mnfr Part No: 30236MASCHINENFABRIK BEUMER GMBH & CO KG
    300ELBOW, PIPE TO TUBE: SIZE 1/4 IN, PIPE CONNECTION MNPT, TUBE CONNECTION COMPRESSION, DEGREE 90, RADIUS SHORT, MATERIAL BRASS ASTM B124, FFT:JIS H3250 C3771BE; ALLOY 377; THREAD TO ASME B1.20.1, MNFR: HY-LOK CORP. MNFR PART NO: CLMA 4-4N-BRAS, MNFR: PARKER HANNIFIN CORPORATION MNFR PART NO: 4-4CBZ-B,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEPARKER HANNIFIN CORPORATION
    190ELBOW, PIPE TO TUBE: SIZE 3/8 IN, PIPE CONNECTION MNPT, TUBE CONNECTION COMPRESSION, DEGREE 90, MATERIAL BRASS, FFT:THREAD TO ANSI B 2.1; FLUID CONNECTORS, MNFR: PARKER HANNIFIN CORPORATION MNFR PART NO: 6-6 CBZ-B,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEPARKER HANNIFIN CORPORATION
    19ELBOW, PIPE: SIZE 1 IN, CONNECTION THD, DEGREE 90, RATING 150 LB, MATERIAL MI ASTM A197 GALV, FFT:,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    131ELBOW, PIPE: SIZE 1-1/2 IN, CONNECTION THD, DEGREE 90, RATING 150 LB, MATERIAL MI ASTM A197 GALV, RADIUS LR, STANDARD ASME B1.20.1, FFT:,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    30ELBOW, PIPE: SIZE 3 IN, CONNECTION SW, DEGREE 90, MATERIAL CPVC ASTM F439/CPVC ASTM D1784 CL 23447, SCHEDULE 80, FFT:,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    27ELBOW, PIPE: SIZE 4 IN, CONNECTION BW, DEGREE 45, MATERIAL SS ASTM A403, RADIUS LR, GRADE WP304-W/WP304L-WX, SCHEDULE 10S, STANDARD ASME B16.9, FFT:TYPE: WELDED; DUAL CERTIFIED,  EQUIP MODEL NO: 5440496,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19ELBOW: TYPE OUTLET, MATERIAL SA217-WC9, FFT: FOR PRIMARY QUENCH EXCHANGER, Mnfr: YOO JIN TMC Mnfr Part No: NDK0706254YOO JIN TMC
    60ELECTRODE, WELDING: AWS CLASS A5.5-96 E7010-P1, SIZE DIA 3.2 X LG 350 MM, CONTAINER PACK 10 LB, Mnfr: BOHLER Mnfr Part No: FOX CEL 75BOHLER
    19ELECTRODE, WELDING: AWS CLASS A5.9, SIZE DIA 3/32 X LG 320 MM, CONTAINER BOX 5 KG, Mnfr: ALRUQEE GROUP Mnfr Part No: E-2553,  MTCALRUQEE GROUP
    40ELECTRODE, WELDING: AWS CLASS E308H, SIZE 2.5 MM, STANDARD ASME SFA 5.4, FFT: APPLICATION SMAW, INSPECTION REQUIREMENT: IMPACT TEST CERTIFICATE SHOULD BE PRODUCED FOR THE SUPPLIED LOT OF THE CVN FILLER WIRES AND WELDING RODS. IN THE TEST CERTIFICATE PLEASE MENTION FERRITE CONTENT FOR ALL THE STAINLESS STEEL AND ALLOY STEEL FILLER WIRES AND WELDING ELECTRODESELGA
    25ELECTRODE, WELDING: SIZE DIA 3.2 X LG 1000 MM, AWS CLASS A5.9-93, MATERIAL C/MN/SI/CR/NI/NB, CONTAINER PCK 5 LB, , MNFR: BOHLER MNFR PART NO: NIBAS 70/20-IG,  TEST CERTIFICATE COMMENTS: THE CERTIFICATE IS REQUERDBOHLER
    23END: TYPE BLOCK, STOP, MATERIAL POLYAMIDE, STANDARD UL, FFT: FOR LOCAL PANELS/ PUSH BUTTON STATIONS ETC, Mnfr: MITSUBISHI HEAVY INDUSTRIES, LTD. Mnfr Part No: UNKNOWN, Mnfr: WEIDMULLER. Mnfr Part No: EW35WEIDMULLER
    47FASTENER: TYPE QUARTER TURN, OEM: MOLLERS. OEM Part No: 707364, Suppl: MOLLERS. Suppl P/N: UNKNOWN, MANDRG: METAL DETECTOR Rev: 0 Item: 52MOLLERS.
    48FERRULE, TUBE ADAPTOR: TYPE BACK, TUBE SIZE 3/8 IN, MATERIAL SS 316, GRADE F316, Mnfr: SWAGELOK Mnfr Part No: SS-304-1, Mnfr: PARKER HANNIFIN CORPORATION Mnfr Part No: 6TU-SSSWAGELOK
    182FERRULE: TYPE FRONT AND BACK, FFT: COMPRESSION TYPE; FOR FRACTIONAL TUBE; SS 18 CR-10NI-2MO TO ASTM A479 TP316 OR EQUIVALENT; SIZE 3/8"" TUBE OD, Mnfr: HY-LOK CORP. Mnfr Part No: CFS-6-SS316, Mnfr: PARKER HANNIFIN CORPORATION Mnfr Part No: 6FF6-SS316 & 6BF6-SS316PARKER HANNIFIN CORPORATION
    40FILTER, AIR: SIZE WD 24-1/2 X LG 28 X THK 3-3/4 IN, SHAPE RECTANGULAR, APPLICATION HVAC PACKAGE, Mnfr: ZAMIL AIR CONDITIONERS Mnfr Part No: 80024805ZAMIL AIR CONDITIONERS
    70FILTER, AIR: TYPE PLEATED, SIZE WD 20 X LG 24 X THK 2 IN, MATERIAL PLEATED, SHAPE RECTANGULAR, FFT: FILTER, AIR: TYPE PLEATED, FILTER ACTUAL DIMENSION: 19-7/16"" X 23-7/16"" X 1-7/8""; .FOR HVAC PACKAGE. M/N#PM-360F2Z00. *START-UP SPARE; LLDPE SPARE ITEMS, Mnfr: EXCEL AIR FILTRATION Mnfr Part No: 20""X24""X2"", SPR: 217 PHASE VI/OSBL Rev: 0, Tag/Equip No: 40-BD-3-ACU-1,2,3,4EXCEL AIR FILTRATION
    50FILTER, BAG: MATERIAL POLYESTER, FFT: FILTRATION RATING: 10 MICRON; ABSOLUTE MICROFIBER BAG POLYESTER MEDIA WITH POLYESTER FLANGE RING STYLE,, Mnfr: DAHLMAN Mnfr Part No: DAH-FB-PL-10DAHLMAN
    58FILTER, BAG: SIZE DIA 130 X LG 1900 MM, MATERIAL POLYPROPYLENE, APPLICATION VACCUM FILTER, Mnfr: DAEYOUNG COMMUNICATION CO., LTD. Mnfr Part No: UNK, Mnfr: DAEGA POWDER SYSTEMS CO.LTD. Mnfr Part No: DG0003DAEYOUNG COMMUNICATION CO., LTD.
    60FILTER, BAG: SIZE DIA 160 MM X LG 4 M, MATERIAL POLYETHYLENE, NEEDLE (MATERIAL: FELT ANTISTATIC), WITH DIAPHRAGM (MATERIAL: PTFE), FFT:, MNFR: FRIWO MNFR PART NO: FRI.00001FRIWO
    20FILTER, BAG: SIZE WD 289 X LG 594 X DP 20 MM, APPLICATION HVAC UNIT, FFT: SOURCE: BAG FILTER. USED FOR TAG: AH-10-UM-01, MODEL: KW08B3., : ZAMIL : 80104140, DRAWING: ETH-137-M Rev: 00ZAMIL
    255FILTER, BAG: SIZE WD 30 X LG 1300 X HT 180 MM, MATERIAL POLYPROPYLENE-VLIES, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 055174, Mnfr Drg 4100430.0.408.6058.0.03 Rev: 03 Item No: 14COPERION WAESCHLE GMBH & CO KG
    38FILTER, ELECTRONIC: FFT: GE, Mnfr: POWELL ELECTRICAL MFG CO. Mnfr Part No: 302A3847P1POWELL INDUSTRIES INC
    31FILTER, ELEMENT: SIZE DIA 327 X LG 1200 MM, MATERIAL BOROSILICATE GLASS FIBRE, FFT: AREA: 19-20 M2 , Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 055434COPERION WAESCHLE GMBH & CO KG
    24FILTER, ELEMENT: SIZE DIA 6 X LG 81 IN, MATERIAL SPUN BOND POLYSTER, FFT: WITH SS GROUND WIRE; FILTER AREA: 2613 SQ FT, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 6951841, Mnfr: PELLETRON CORPORATION Mnfr Part No: UNKPELLETRON CORPORATION
    21FILTER, ELEMENT: TYPE CARTRIDGE, SIZE OD 2-1/2 X LG 20 IN, MATERIAL GLASS FIBER, FILTERING RETENTION 0.2 MICRON, Mnfr: PALL CORPORATION Mnfr Part No: AB2U2-20ZH4 (D), Suppl: JFC CORPORATION-KOREA Suppl P/N: UNKPALL CORPORATION
    18FILTER, ELEMENT: TYPE CARTRIDGE, SIZE OD 2-3/8 X LG 10 IN, MATERIAL SS 316L POWDER, FILTERING RETENTION 5 MICRON, Mnfr: PALL CORPORATION Mnfr Part No: MBS1001S050H13PALL CORPORATION
    22FILTER, ELEMENT: TYPE FUEL OIL, SIZE ID 42 X OD 100 X HT 234 MM, MATERIAL PAPER, FFT: WITH HIGH EFFICIENCY, Mnfr: CATERPILLAR INC Mnfr Part No: 1R-0756, Suppl: HYOSUNG Suppl P/N: UNK, MANDRG: FUEL OIL FILTERS Rev: 0 Item: 13CATERPILLAR INC
    23FILTER, ELEMENT: TYPE PRIMARY AIR, SIZE ID 153 X OD 265 X LG 177 MM, MATERIAL PAPER/WIRE MESH, FFT: FOR ENGINE; TYPE: 3406B, SERIAL NO. 6TB3573-UP; CLEANER TYPE: GP-7C1723; NPT 1IN, Mnfr: CATERPILLAR INC Mnfr Part No: 7C1572, Mnfr: LURGI Mnfr Part No: 116C76003003004, DRAWING: D6584200 4F09042 Rev: 0CATERPILLAR INC
    25FILTER, ELEMENT: TYPE Y-STRAINER SCREEN, MATERIAL SS 304, FILTERING RETENTION 20 MESH, FFT: SIZE OF STRAINER: 1/2 IN, Mnfr: SPIRAX SARCO LTD Mnfr Part No: 53828FSPIRAX SARCO LTD
    17FILTER: SIZE WD 292 X LG 597 XTHK 47-1/2 MM, MATERIAL ALUMINIUM, FFT: SOURCE: ALUMINIUM FILTER. USED FOR TAG: PAC-10-SS001(A-D), MODEL: PX185 F.D.S.H., : ZAMIL : 80104130ZAMIL
    19FILTER: TYPE DISPOSABLE MODULE, SIZE WD 610 X HT 457 X THK 152 MM, MATERIAL PLASTIC, STANDARD UL, FFT: WITH CP BLEND MEDIA, Mnfr: PURAFIL INC, USA Mnfr Part No: PK18CPB, Suppl: ZAMIL Suppl P/N: UNKNOWNPURAFIL INC, USA
    35FILTER: TYPE RC, FFT: FOR LV SWITCHGEAR, Mnfr: GE (GENERAL ELECTRIC CO.) Mnfr Part No: UNKNOWN, Mnfr: POWELL ELECTRICAL MFG CO. Mnfr Part No: 273A7844ARG5POWELL ELECTRICAL MFG CO.
    18FITTING, GREASE NIPPLE: TYPE NOZZLE, SIZE 3/16 IN, MATERIAL SS, FFT: PRESS FIT; APPLICATION: 3-WAY HYDRANT MONITOR NOZZLE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 713191, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 18747 Rev: 0 Item No: 11,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    47FITTING: TYPE BULKHEAD UNION, SIZE T 3/8 IN, MATERIAL SS 316, FFT: SOURCE: O-RING., OEM: SWAGELOK OEM Part No: SS-600-61, Mnfr: PARKER HANNIFIN CORPORATION Mnfr Part No: 6BC6-316, : U&O : SK-SS-600-61, Suppl: TAMEEMA INTERNATIONAL TRADING COMPANY, KSA Suppl P/N: 6BC6-316, Suppl: U&O Suppl P/N: SK-SS-600-61, DRAWING: YC2-209-09504 POS:26 Rev: 0, PO NO: 06700390-7-0006 Rev: 0, SPR: U&O-037-I Rev: 0, Model/Machine No: MIS1-421-330000-700, 1950PLUS, CHEMGUARD, CL17, Tag/Equip No: 72-AT-2004, 71-AT-1003, 78-AT-8001, 78-AT-8003, 78-AT-8002PARKER HANNIFIN CORPORATION
    35FLANGE, PIPE: TYPE FLAT FACE, SIZE 1-1/2 IN, MATERIAL CS ASTM A105, RATING 150 LB, CONNECTION TYPE SLIP-ON, STANDARD ANSI, FFT:SERRATED, MNFR: FUJI SANGYO CO. LTD. MNFR PART NO: UNKNOWN, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE ITEMFUJI SANGYO CO. LTD.
    42FLANGE, PIPE: TYPE LARGE FEMALE, SIZE 1 IN, MATERIAL SS ASTM A182 GR 304, RATING 600LB; SCH 80, CONNECTION TYPE WELD NECK, STANDARD ANSI B16.5, FFT:BORE SIZE: 24.3 MM,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE ITEMS-
    22FLANGE, PIPE: TYPE LARGE FEMALE, SIZE 3/4 IN, MATERIAL SS ASTM A182 GR 304, RATING 600 LB, CONNECTION TYPE WELD NECK, STANDARD ANSI B16.5, FFT:FLANGES SEAL SURFACES SMOOTH TO 125 AA.RH (MAX),  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE ITEMS-
    39FLANGE, PIPE: TYPE LARGE MALE, SIZE 1 IN, MATERIAL SS ASTM A182 GR 304, RATING 600LB; SCH 80, CONNECTION TYPE WELD NECK, STANDARD ANSI B16.5, FFT:BORE: 24.3 MM,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE ITEM-
    17FLANGE, PIPE: TYPE LONG RF, SIZE 1-1/2 IN, MATERIAL SS ASTM A182 GR F304/304L, RATING 1500 LB, CONNECTION TYPE WELD NECK, STANDARD ASME B16.5, FFT:,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    30FLANGE, PIPE: TYPE RAISED FACE, SIZE 1 IN, MATERIAL CS ASTM A105, RATING 300 LB, CONNECTION TYPE SLIP-ON, STANDARD ANSI B16.5, FFT:, MNFR: AKAHAGI FLANGE LTD. MNFR PART NO: L30E04-1, SPR 203 REV: 0 ITEM NO: 132,  TEST CERTIFICATE COMMENTS: MTCAKAHAGI FLANGE LTD.
    19FLANGE, PIPE: TYPE RAISED FACE, SIZE 1 IN, MATERIAL CS ASTM A350 GR LF2, RATING 150 LB, CONNECTION TYPE SLIP-ON, STANDARD ANSI, FFT:SMOOTH, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE ITEM-
    30FLANGE, PIPE: TYPE RAISED FACE, SIZE 1/2 IN, MATERIAL CS ASTM A105, RATING 150 LB, CONNECTION TYPE SLIP-ON, STANDARD ANSI B16.5, FFT:, MNFR: AKAHAGI FLANGE LTD. MNFR PART NO: L30D04-1/2, SPR 203 REV: 0 ITEM NO: 103,  TEST CERTIFICATE COMMENTS: MTCAKAHAGI FLANGE LTD.
    30FLANGE, PIPE: TYPE RAISED FACE, SIZE 10 IN, MATERIAL CS, RATING 150 LB, CONNECTION TYPE WELD NECK, FFT:2 YEARS SPARE PARTS FOR REFRIGERATION UNIT OF TPF PLANT,  SUPPL: REISNER GMBH SUPPL PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    28FLANGE, PIPE: TYPE RAISED FACE, SIZE 1-1/2 IN, MATERIAL CS ASTM A105, RATING 300 LB, CONNECTION TYPE SLIP-ON, STANDARD ANSI B16.5, FFT:GASKET CONTACT SURFACE TO MSS-SP-6,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    23FLANGE, PIPE: TYPE RF, SIZE 1-1/2 IN, MATERIAL SS ASTM A182 F304/304L, RATING 150 LB, CONNECTION TYPE WELD NECK, STANDARD ASME B16.5, FFT:WITH EXTENDED WELDNECK LG:200 MM,  CATALOGUE NO: 01549,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    40FLANGE, PIPE: TYPE RF, SIZE 1-1/2 IN, MATERIAL SS ASTM A182 GR F304/304L, RATING 300 LB, CONNECTION TYPE SOCKET WELD, STANDARD ASME B16.5, FFT:SCHEDULE 40S,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    20FLANGE, PIPE: TYPE RF, SIZE 3/4 IN, MATERIAL SS ASTM A182 GR F304/304L, RATING 150 LB, CONNECTION TYPE WELD NECK, STANDARD ASME B16.5, FFT:BORE SCH: 40S; SURFACE FINISH: RA=3.2 TO 6.3; WITH CERTIFICATE: 3.1B,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    29FLANGE, PIPE: TYPE RF, SIZE 8 IN, MATERIAL CS ASTM A105, RATING 300 LB, CONNECTION TYPE WELD NECK, STANDARD ASME B16.50, ,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    42FLANGE: TYPE PACKING, SIZE THK 4 MM, MATERIAL CS, FFT:FOR BURNER ASSEMBLY, MNFR: MACCHI S.P.A MNFR PART NO: UNK,  MODEL/MACHINE NO: BURNERS MHM DRL 715/752 MNFR: MACCHI S.P.A,  EQUIP MODEL NO: BURNERS MHM DRL 715/752,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATEMACCHI S.P.A
    17FOLLOWER: TYPE CAM, MATERIAL BRONZE, FFT: 1000 GPM; APPLICATION: 3-WAY HYDRANT MONITOR NOZZLE , OEM: AKRON BRASS CO. USA OEM Part No: 707435, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 29,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    48FRAME: TYPE FILTER, SIZE WD 70 X LG 608 X HT 608, MATERIAL GALVANISHED IRON, FFT: FOR PP III AND U & O PLANT, Mnfr: ZAMIL AIR CONDITIONERS Mnfr Part No: 80104322ZAMIL AIR CONDITIONERS
    27FUNNEL: SIZE 2-3/8 OZ, MATERIAL STEEL, FFT: STAINLESS STEEL FUNNEL, Suppl: MCMASTER-CARR Suppl P/N: 4359T1-
    71FUSE: AMPERAGE 10 A, VOLTAGE 600VAC; 500VDC, CARTRIDGE CERAMIC, CONNECTION FERRULE, SIZE DIA 10 X LG 38 MM, STANDARD CSA; UL, FFT: ELECTRICAL EQUIPMENT; FOR EXTRUDER PACKAGE; INTERRUPTING CAPACITY 100KA, AMPTRAP BRAND; LDPE SPARE ITEMS, Mnfr: GOULD SHAWMUT USA. Mnfr Part No: ATM 10, Mnfr: BERSTORFF GMBH Mnfr Part No: ATM 10-
    24FUSE: AMPERAGE 15 A, FFT: FOR VS 3000, Mnfr: SELEX Mnfr Part No: 68361-42/020, Suppl: MOSECO CORPORATION Suppl P/N: UNKSELEX
    83FUSE: AMPERAGE 15 A, VOLTAGE 600VAC; 500VDC, CARTRIDGE FIBRE GLASS, CONNECTION FERRULE, STANDARD CSA; UL, FFT: ELECTRICAL EQUIPMENT; FOR EXTRUDER PACKAGE; ""DO NOT SUBSTITUTE""; LDPE SPARE ITEMS, Mnfr: GOULD SHAWMUT USA. Mnfr Part No: ATM 15, Mnfr: BERSTORFF GMBH Mnfr Part No: ATM 15, DRAWING: SUB 98 EPP 01 Rev: 0 Item: 290BERSTORFF GMBH
    30FUSE: AMPERAGE 2 A, VOLTAGE 250 VAC, CARTRIDGE CERAMIC, CONNECTION FERRULE, FFT: FOR FIRE PUMP CONTROLLER, Mnfr: METRON, INC. Mnfr Part No: 09026METRON INC.
    72FUSE: AMPERAGE 3 A, VOLTAGE 600 VAC, FFT: FOR PT PRIMARY.; TYPE : A4J3-SHANMUT.; FOR LOW VOLTAGE SWITCHGEAR.; FOR EQUIP NO : 27- 27SG1.; SERIAL NO : 5147-11., Mnfr: POWELL ELECTRICAL MFG CO. Mnfr Part No: A4J3, DRAWING: 5147-12-D5 Rev: 0POWELL ELECTRICAL MFG CO.
    20FUSE: AMPERAGE 3.15 A, VOLTAGE 250 V, CARTRIDGE GLASS, CONNECTION FERRULE, FFT: FOR FIRE PUMP CONTROLLER, Mnfr: METRON, INC. Mnfr Part No: 09014METRON INC.
    98FUSE: TYPE BOTTLE SLOW-BLOW; CONTROL, AMPERAGE 4 A, VOLTAGE 500 V, CARTRIDGE CERAMIC, CONNECTION FERRULE, STANDARD CE, FFT:, MNFR: SIEMENS AG MNFR PART NO: 5228933900SIEMENS AG
    294FUSE: TYPE CONTROL; DIAZED BOTTLE SLOW-BLOW, AMPERAGE 2 A, VOLTAGE 500 V, CARTRIDGE CERAMIC, CONNECTION FERRULE, STANDARD CE, FFT:, MNFR: SIEMENS AG MNFR PART NO: 5228933901SIEMENS AG
    30FUSE: TYPE CURRENT LIMITING, AMPERAGE 1/2 A, VOLTAGE 600 VAC, CARTRIDGE CERAMIC, CONNECTION FERRULE, SIZE DIA 10 X LG 38 MM, CLASSIFICATION CC, STANDARD CSA; UL, Mnfr: GOULD SHAWMUT Mnfr Part No: ATMR 1/2GOULD SHAWMUT USA.
    90FUSE: TYPE CURRENT LIMITING, AMPERAGE 3 A, VOLTAGE 480 VAC, CARTRIDGE CERAMIC, CONNECTION FERRULE, SIZE DIA 10 X LG 35 MM, STANDARD CSA; UL, FFT: OLD MATERIAL NO: 03-02-00043, OLD PART NO: 405.00-0017, OEM: GOULD SHAWMUT OEM Part No: AG3GOULD SHAWMUT USA.
    18FUSE: TYPE CYLINDRICAL, AMPERAGE 2 A, VOLTAGE 24 VAC, CONNECTION FERRULE, SIZE DIA 8.5 X LG 31.5 MM, STANDARD IEC 60269-1, FFT: POLES: 1; WITH CARRIER; FOR SAFETY SHOWER PACKAGE, Mnfr: LEGRAND Mnfr Part No: 12302LEGRAND
    17FUSE: TYPE DUAL ELEMENT TIME DELAY, AMPERAGE 1.25 A, VOLTAGE 250 V, CARTRIDGE FIBRE, CONNECTION FERRULE, SIZE DIA 10.3 X LG 38.1 MM, STANDARD CSA; UL, FFT: TAG#40-5EE-6/8 40-6EE-67/68 40-7EE-17/18 50-3EE-5 70-3EE-8/9/24/25; PHASE VI/OSBL; C-22 JULY 00; TYPE/MODEL FUSETRON, Mnfr: BUSSMANN Mnfr Part No: FNM 1-1/4, SPR: 082 Rev: 0BUSSMANN
    17FUSE: TYPE DUAL ELEMENT, AMPERAGE 10 A, VOLTAGE 250 V AC, SIZE DIA 13/32 X LG 1 1/2 IN, STANDARD UL, FFT:SOURCE: FUSE DUAL ELEMENT, 10 AMPERES, 1.5"", 250VAC, SUPPL: UNKNOWN SUPPL PART NO: FNM10, PO NO 06700390-6-0007 REV: 0, SPR U&O-063-E REV: 0, TAG/EQUIP NO: MCC-77-3001A1, TAG/EQUIP NO: MCC-77-3001B1, SERIAL NO: 16745979-024, SERIAL NO: 16745979-025, MODEL/MACHINE NO: MV MCC-
    163FUSE: TYPE FAST ACTING, AMPERAGE 0.63 A, VOLTAGE 250 V, CARTRIDGE CERAMIC, SIZE DIA 5.2 X LG 20 MM, OEM: BUSSMANN OEM Part No: S501-630-RBUSSMANN
    163FUSE: TYPE FAST ACTING, AMPERAGE 1 A, VOLTAGE 250 V, CARTRIDGE CERAMIC, SIZE DIA 5.2 X LG 20 MM, OEM: BUSSMANN OEM Part No: S501-1-RBUSSMANN
    65FUSE: TYPE FAST ACTING, AMPERAGE 1.6 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-1.6-R,  Reference No: UCB202/ RIB21001/RIB21002BUSSMANN
    163FUSE: TYPE FAST ACTING, AMPERAGE 10 A, VOLTAGE 250 V, CARTRIDGE CERAMIC, SIZE DIA 5.2 X LG 20 MM, OEM: BUSSMANN OEM Part No: S501-10-RBUSSMANN
    165FUSE: TYPE FAST ACTING, AMPERAGE 10 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-10-R,  Reference No: UCB202/ RIB21001/RIB21002BUSSMANN
    35FUSE: TYPE FAST ACTING, AMPERAGE 1-1/2 A, VOLTAGE 600 V, CONNECTION FERRULE, SIZE DIA 13/32 X LG 1-1/2 IN, CLASSIFICATION CC, STANDARD CSA; UL, FFT: FOR SECONDARY CONTROL POWER TRANSFORMER 150VA, Mnfr: FERRAZ SHAWMUT Mnfr Part No: ATM1-1/2, Suppl: WESCOSA Suppl P/N: UNKFERRAZ SHAWMUT
    96FUSE: TYPE FAST ACTING, AMPERAGE 12 A, VOLTAGE 125VAC; 60VDC, CARTRIDGE THERMOPLASTIC, SIZE LG 21.3 MM, STANDARD UL, FFT:, MNFR: COOPER BUSMANN INC MNFR PART NO: BK/GMT-12ACOOPER BUSMANN INC
    163FUSE: TYPE FAST ACTING, AMPERAGE 2 A, VOLTAGE 250 V, CARTRIDGE CERAMIC, SIZE DIA 5.2 X LG 20 MM, OEM: BUSSMANN OEM Part No: S501-2-RBUSSMANN
    165FUSE: TYPE FAST ACTING, AMPERAGE 2 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-2-R,  Reference No: UCB202/ RIB21001/RIB21002BUSSMANN
    165FUSE: TYPE FAST ACTING, AMPERAGE 3.15 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-3.15-R,  Reference No: UCB202/ RIB21001/RIB21002BUSSMANN
    163FUSE: TYPE FAST ACTING, AMPERAGE 6.25 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-6.25-RBUSSMANN
    165FUSE: TYPE FAST ACTING, AMPERAGE 6.3 A, VOLTAGE 250 V, CARTRIDGE GLASS, SIZE DIA 5 X LG 20 MM, OEM: BUSSMANN OEM Part No: GMA-6.3-R,  Reference No: UCB202/ RIB21001/RIB21002BUSSMANN
    18FUSE: TYPE FINE, AMPERAGE 6.3 A, CARTRIDGE GLASS, CONNECTION FERRULE, SIZE DIA 5 X LG 20 MM, STANDARD CE; DIN 41571-2, FFT: FOR LABORATORY EQUIPMENT, Mnfr: OCS OPTICAL CONTROL SYSTEMS GMBH Mnfr Part No: 555-100039OCS OPTICAL CONTROL SYSTEMS GMBH
    95FUSE: TYPE HRC, AMPERAGE 2 A, VOLTAGE 500 VAC, CARTRIDGE GLASS, SIZE DIA 10 X LG 38 MM, FFT: WITH OUT INDICATOR; FOR LV SWITCH GEAR, Mnfr: LEGRAND Mnfr Part No: 134 02LEGRAND
    17FUSE: TYPE HRC; FAST ACTING, AMPERAGE 10 A, VOLTAGE 500 V, CARTRIDGE CERAMIC, CONNECTION FERRULE, SIZE DIA 10 X LG 38 MM, STANDARD IEC 60269-1, FFT: FOR LV SWITCH GEAR, Mnfr: LEGRAND Mnfr Part No: 134 10LEGRAND
    41FUSE: TYPE INDICATING, AMPERAGE 1 A, VOLTAGE 250 V, CONNECTION FERRULE, SIZE DIA 5 X LG 25 MM, Mnfr: WEIDMULLER. Mnfr Part No: 265800000WEIDMULLER
    92FUSE: TYPE PRIMARY, AMPERAGE 2 A, VOLTAGE 600 VAC, CARTRIDGE MELAMINE, CONNECTION FERRULE, SIZE DIA 13/20 X LG 1-1/2 IN, CLASSIFICATION CC, STANDARD CSA; UL, Mnfr: GENERAL ELECTRIC P/N: CSC#ATMR2, Mnfr: GOULD SHAWMUT P/N: ATMR2GE (GENERAL  ELECTRIC CO.)
    35FUSE: TYPE QUICK BLOW, AMPERAGE 2 A, VOLTAGE 125 V, SIZE DIA 1/4 X LG 1-1/4 IN, FFT: GLASS; CAP: NICKEL PLATED, Mnfr: BUSSMANN Mnfr Part No: AGC 2BUSSMANN
    47FUSE: TYPE REPLACEMENT, CONNECTION FURRULE, SIZE ****, OEM: MOLLERS. OEM Part No: 707334, Suppl: MOLLERS. Suppl P/N: 707334, MANDRG: METAL DETECTOR Rev: 0 Item: 4MOLLERS.
    20FUSE: TYPE SEMICONDUCTOR, AMPERAGE 160 A, VOLTAGE 690 V AC, CARTRIDGE CERAMIC, FFT:FOR UPS SYSTEM 120VDC-
    23FUSE: TYPE SEMICONDUCTOR, AMPERAGE 250 A, VOLTAGE 690 V, CARTRIDGE CERAMIC, CONNECTION BOLTED, STANDARD IEC; UL, Mnfr: BUSSMANN Mnfr Part No: 250 FM, Suppl: GUTOR Suppl P/N: 515-3251-
    35FUSE: TYPE SLOW BLOW, AMPERAGE 1  A, VOLTAGE 125 V, CARTRIDGE GLASS, CONNECTION FERRULE, SIZE DIA 1/4 X LG 1-1/4 IN, FFT: GLASS; CAP: NICKEL PLATED, Mnfr: BUSSMANN Mnfr Part No: MDL-1BUSSMANN
    98FUSE: TYPE SLOW BLOW, AMPERAGE 2 A, SIZE DIA 5 X LG 20 MM, FFT: SUPPLIED IN SET OF (10), Mnfr: LITTELFUSE Mnfr Part No: UNKNOWN, Suppl: ODS BV (METERING SYSTEMS) Suppl P/N: UNKLITTELFUSE
    35FUSE: TYPE SLOW BLOW, AMPERAGE 2-1/2 A, VOLTAGE 125 V, CARTRIDGE GLASS, CONNECTION FERRULE, SIZE DIA 1/4 X LG 1-1/4 IN, FFT: GLASS; CAP: NICKLE PLATED, Mnfr: BUSSMANN Mnfr Part No: MDL 2-1/2BUSSMANN
    17FUSE: TYPE SLOW BLOW, AMPERAGE 6.25 A, VOLTAGE 250 VAC, CARTRIDGE CERAMIC, CONNECTION FERRULE, SIZE DIA 10 X LG 38 MM, STANDARD CSA; UL-448H, FFT: DUAL ELEMENT; 200KA INTERRUPTING CAPACITY, Mnfr: AAC Mnfr Part No: 50EC680-086, : BUSSMANN : FNM 6-1/4, DRAWING: ATTACH-4 (50EC) Rev: 0 Item: 43, SPR: 503 Rev: 0 Item: 053AAC
    17FUSE: TYPE TIME DELAY, AMPERAGE 1.8 A, VOLTAGE 600 V, CARTRIDGE FIBER, CONNECTION FERRULE, SIZE DIA 13/32 X LG 1-1/2 IN, STANDARD CSA; UL, FFT: FOR ELECTRIC HEAT TRACING SYSTEM, Mnfr: BUSSMANN Mnfr Part No: FNQ-R-1 8/10BUSSMANN
    493FUSE: TYPE TIME DELAY, AMPERAGE 2 A, VOLTAGE 250 VAC, CARTRIDGE GLASS, CONNECTION OFF SET BLADE, SIZE DIA 5.8 X LG 22.5 MM, STANDARD CE; CSA; UL, FFT: CARTRIDGE, Mnfr: LITTELFUSE Mnfr Part No: 0213.002 MXEPLITTELFUSE
    18FUSE: TYPE TIME DELAY, AMPERAGE 800 MA, VOLTAGE 250 V, CARTRIDGE GLASS, CONNECTION FERRULE, SIZE DIA 5 X LG 20 MM, Mnfr: J.M. CANTY INC Mnfr Part No: L128J.M. CANTY INC
    17FUSE: TYPE TIME DELAY, AMPERAGE 9 A, VOLTAGE 600 V, CARTRIDGE MELAMINE, CONNECTION FERRULE, SIZE DIA 13/32 X LG 1-1/2 IN, STANDARD CSA; UL, FFT: FOR ELECTRIC HEAT TRACING SYSTEM, Mnfr: BUSSMANN Mnfr Part No: FNQ-R-9BUSSMANN
    49GASKET SET: TYPE CONNECTOR, APPLICATION STEAM STRAP, FFT: QUANTITY: 2; SIZE: ID 24.6 X OD 32.8 X THK 2.67 IN, ID 8.7 X OD 16.7 X THK 2.67 IN; MATERIAL: SS 304/NON ASBESTOS, Mnfr: ARMSTRONG INTERNATIONAL SA. Mnfr Part No: A8905/A8906ARMSTRONG INTERNATIONAL SA.
    29GASKET, JACKETED: JACKET MATERIAL SS 304, FILLER MATERIAL GRAPHITE, SHAPE ROUND, FFT: FOR CAP 1/2 IN; Y-STRAINER, Mnfr: SPIRAX SARCO LTD Mnfr Part No: 52065SPIRAX SARCO LTD
    155GASKET, JACKETED: TYPE FF, STYLE DOUBLE, JACKET MATERIAL SS 304, FILLER MATERIAL GRAPHITE, SIZE 6 IN, SHAPE ROUND, FFT:RATING: 150 LB-
    21GASKET, PRE CUT: SIZE 25 X 7 MM, MATERIAL PTFE, HOLES WIITHOUT, STANDARD ASME B16.21, FFT: JOINT SEALANT, MNFR: TEXPACK SRL - UNIPERSONALE MNFR PART NO: 5525/7TEXPACK SRL - UNIPERSONALE
    23GASKET, PRE CUT: SIZE ID 6.375 X OD 8.75 X THK 0.015 IN, SHAPE ROUND, MATERIAL FIBER, HOLES 4, STANDARD ASME B16.21, , MNFR: RUHRPUMPEN MNFR PART NO: 8023119,  SUPPL: RUHRPUMPEN SUPPL PART NO: UNK, MNFR DRG 72551 REV: C ITEM NO: 744-1,  EQUIP SERIAL NO: 100930,  EQUIP MODEL NO: 6X10X23H SCERUHRPUMPEN
    65GASKET, PRE CUT: TYPE FLAT FACE, SIZE ID 116 X OD 225 X THK 3 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL PTFE, HOLES (8) DIA 18 MM, FLANGE RATING 150 LB, PCD 165 MM, STANDARD ASME B16.21, FFT:FOR PHENOL AREA HEAVIES DRAIN DRUM, MNFR: JEIL E & S CO. LTD MNFR PART NO: UNKJEIL E & S Co. Ltd
    105GASKET, PRE CUT: TYPE FLAT RING, SIZE ID 114 X OD 175 X THK 3 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL NEOPRENE, HOLES WITHOUT, FLANGE RATING 150 LB, STANDARD ASME B16.21, FFT:-
    245GASKET, PRE CUT: TYPE FLAT RING, SIZE ID 33 X OD 67 X THK 3 MM, NOMINAL FLANGE SIZE 1 IN, SHAPE ROUND, MATERIAL NEOPRENE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD ASME B16.21, FFT:, MNFR: AL-IMAN FACTORIES MNFR PART NO: UNKAL-IMAN FACTORIES
    29GASKET, PRE-CUT: SHAPE OCTAGONAL, HOLES WITHOUT, FFT: FOR TSF- 4225; ADD-AMPERESTRAAT 3. 1704, Mnfr: INTERLINE SYSTEMS BV Mnfr Part No: 2-03800B, Mnfr: SM HEETHUGOWAARD, NETHERLANDS Mnfr Part No: UNKNOWNINTERLINE SYSTEMS BV
    65GASKET, PRE-CUT: SIZE 14 IN, SHAPE ROUND, MATERIAL EPDM, STANDARD AWWA C606, FFT: FOR GROOVED END COUPLING; CENTER LEG DESIGN-
    500GASKET, PRE-CUT: SIZE 6 IN, SHAPE ROUND, MATERIAL EPDM, STANDARD AWWA C606, FFT: FOR GROOVED-END COUPLING; CENTER LEG DESIGN-
    51GASKET, PRE-CUT: SIZE DIA (302 X 314) X THK 3 MM, SHAPE OBLONG, MATERIAL TEFLON, STANDARD ASME B16.21, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: 8305314, Suppl: AHA M-TECH IND. CO. LTD. Suppl P/N: UNKJEIL E & S Co. Ltd
    74GASKET, PRE-CUT: SIZE ID 100 X OD 125 X THK 3 MM, NOMINAL FLANGE SIZE DN 80 MM, SHAPE ROUND, MATERIAL NEOPHRENE WHITE, HOLES WITHOUT, STANDARD DIN EN 1514, Mnfr: HERTEL Mnfr Part No: UNK, Mnfr: ZEPPELIN GMBH Mnfr Part No: 8425, Suppl: ZEPPELIN GMBH Suppl P/N: UNK, MANDRG: 25 0682 000 Rev: 6 Item: N14, 25 0685 100 Rev: 6 Item: N10, 25 0684 700 Rev: 2 Item: N16ZEPPELIN GMBH
    18GASKET, PRE-CUT: SIZE ID 117.3 X OD 200 X THK 3 MM, SHAPE ROUND, MATERIAL NON ASBESTOS, HOLES (8) DIA 19 MM, STANDARD ASME B16.21, PCD 165 MM, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: JES-7022-060, Suppl: JMC CORPORATION Suppl P/N: SEC7022-060JEIL E & S Co. Ltd
    35GASKET, PRE-CUT: SIZE ID 189 X OD 308 X THK 3 MM, SHAPE ROUND , MATERIAL GRAPHITE WITH SS 316 INSERT, HOLES 8 ( 15 MM ), STANDARD ASME B16.21 , Mnfr: UNKNOWN Mnfr Part No: P224UNKNOWN
    19GASKET, PRE-CUT: SIZE ID 19 X OD 43.2 X THK 3  MM, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, MATERIAL SOFT AL, PRESSURE RATING 600 LB, FLANGE RATING 600 LB-
    31GASKET, PRE-CUT: SIZE ID 199.5 X OD 251.5 X THK 3 MM, SHAPE ROUND, MATERIAL GRAPHITE, HOLES WITHOUT, STANDARD ASME B16.21, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    69GASKET, PRE-CUT: SIZE ID 22 X OD 35 X THK 4 MM, SHAPE ROUND, MATERIAL RUBBER, HOLES WITHOUT, FFT: FOR SERVICE:WATER DEMINERALIZATION; ANY MANUFACTURER., INSPECTION REQUIREMENT: EACH CONTAINER SHOULD BE LABELLED WITH PRODUCTION DATE AND EXPIRY DATE-
    19GASKET, PRE-CUT: SIZE ID 24.4 X OD 51.1 X THK 3 MM, NOMINAL FLANGE SIZE 1 IN, SHAPE ROUND, MATERIAL SOFT AL, PRESSURE RATING 600 LB, FLANGE RATING 600 LB-
    45GASKET, PRE-CUT: SIZE ID 2-7/8 X OD 4-7/8 X THK 1/16, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS. FOR 2-1/2 IN. PIPE, SIZED TO FIT CLASS 150 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 4459K56-
    33GASKET, PRE-CUT: SIZE ID 28.8 X OD 36 X THK 2 MM, MATERIAL SOFT IRON, FFT: FOR FIN FAN  HEADER EXCHANGER, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    138GASKET, PRE-CUT: SIZE ID 325 X OD 483 X THK 3 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL NEOPHRENE WHITE, HOLES (12) DIA 25 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, PCD 432 MM, Mnfr: ZEPPELIN GMBH Mnfr Part No: 3669, Mnfr: HERTEL Mnfr Part No: UNKZEPPELIN GMBH
    27GASKET, PRE-CUT: SIZE ID 60 X OD 105 X THK 1.5 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL GRAPHITE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD ASME B16.21, FFT: FOR DENIM WATER & CONDENSATE PACK; REF.P.O.#:09150-1604; KOP SPARE ITEM, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK, Mnfr: ECODYNE LTD. Mnfr Part No: 143GR020ZB1, Tag/Equip No: WP-07; WP-10; PR-05-PR10, WD-01A/ B - WD-04A/ BAL-IMAN FACTORIES
    62GASKET, PRE-CUT: SIZE ID 63 X OD 130 X THK 3 MM, SHAPE ROUND, MATERIAL NON-ASBESTOS, HOLES (4) DIA 15 MM, STANDARD ASME B16.21, PCD 105 MM, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: JES-7022-059, Suppl: JMC CORPORATION Suppl P/N: SEC7022-059JEIL E & S Co. Ltd
    58GASKET, PRE-CUT: SIZE ID 90 X OD 200 X THK 3 MM, SHAPE ROUND, MATERIAL NEOPHRENE WHITE, HOLES (8) DIA 18 MM, STANDARD DIN EN 1514, PCD 160 MM, Mnfr: ZEPPELIN GMBH Mnfr Part No: 3566, Mnfr: HERTEL Mnfr Part No: UNKZEPPELIN GMBH
    18GASKET, PRE-CUT: SIZE ID 92 X OD 190 X THK 3 MM, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, MATERIAL NEOPHRENE WHITE, HOLES (4) DIA 19 MM, STANDARD ASME B16.21, PCD 152.4 MM, Mnfr: ZEPPELIN GMBH Mnfr Part No: 3638, Mnfr: HERTEL Mnfr Part No: UNKZEPPELIN GMBH
    24GASKET, PRE-CUT: SIZE THK 1.5 MM, NOMINAL FLANGE SIZE 14 IN, SHAPE ROUND, MATERIAL FLEXIBLE GRAPHITE WITH SS 316 CORRUGATED INSERT, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: FLAT RING; PMS: 1CB2S01, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: UNK, Suppl: IL SUNG ENGINEERING CO LTD. Suppl P/N: UNKJEIL E & S Co. Ltd
    35GASKET, PRE-CUT: SIZE THK 2 MM, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, MATERIAL CARBON FIBER WITH NITRILE BUTADIENE RUBBER, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: COMPOSED OF A BLEND CONTAINING ARAMIDIC FIBERS (KELVAR) +/-5 PCT IN WT, CARBON FIBERS 20 PCT IN WT, MINERAL FIBERS, INORGANIC FILLERS AND NITRILE ELASTOMER; CODE 17GN; CONNECTION: RF, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    38GASKET, PRE-CUT: TYPE FF, SIZE ID 115 X OD 229 X THK 3 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL NEOPHRENE WHITE, HOLES (8) DIA 19 MM, STANDARD ASME B16.21, PCD 190.5 MM, Mnfr: ZEPPELIN GMBH Mnfr Part No: 3639, Mnfr: HERTEL Mnfr Part No: UNKZEPPELIN GMBH
    21GASKET, PRE-CUT: TYPE FF, SIZE ID 12 X OD 15 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, PRESSURE RATING 300 LB, HOLES (8) DIA 6 MM, FFT: FOR ANALYZER DUCT AS-11001-
    43GASKET, PRE-CUT: TYPE FF, SIZE ID 14 X OD 21 X THK 1/8 IN, NOMINAL FLANGE SIZE 14 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES WITH, STANDARD ANSI B16.21/ANSI B16.5, FLANGE RATING 150 LB, FFT: DESIGN AND DIMENSIONS TO ANSI B16.21, DUROMETER OF 40-50 SHORE A, Mnfr: AL IMAN FACTORIES Mnfr Part No: UNKAL IMAN FACTORIES
    1748GASKET, PRE-CUT: TYPE FF, SIZE THK 1/8 IN, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES 4, STANDARD ASME B16.21, FLANGE RATING 150 LB-
    41GASKET, PRE-CUT: TYPE FF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (12) DIA 20MM, STANDARD ASME B16.5/B16.21, FLANGE RATING 150 LB-
    42GASKET, PRE-CUT: TYPE FF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (8), STANDARD ASME B16.5/B16.21, FLANGE RATING 150 LB-
    64GASKET, PRE-CUT: TYPE FF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 8 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (8), STANDARD ASME B16.5/B16.21, FLANGE RATING 150 LB-
    18GASKET, PRE-CUT: TYPE FF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (12) DIA 25 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/FF3/12-150GULF GASKET FACTORY
    21GASKET, PRE-CUT: TYPE FF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (4) DIA 18 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/FF3/2-150GULF GASKET FACTORY
    62GASKET, PRE-CUT: TYPE FF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (8) DIA 18 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/FF3/4-150GULF GASKET FACTORY
    60GASKET, PRE-CUT: TYPE FF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 8 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (8) DIA 22 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/FF3/8-150GULF GASKET FACTORY
    92GASKET, PRE-CUT: TYPE FF/RF, SIZE THK 1/8 IN, NOMINAL FLANGE SIZE 2 IN, MATERIAL NEOPRENE RUBBER, FLANGE RATING 150 LB, FFT: WITH CONVERSION RING, Suppl: UNKNOWN Suppl P/N: UNK-
    49GASKET, PRE-CUT: TYPE FLAT FF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES (4) DIA 18 MM, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: FLANGE STANDARD: ASME B16.5; FOR BOLT, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    19GASKET, PRE-CUT: TYPE FLAT FULL FACE, SIZE ID 327 X OD 412 X THK 3 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL GRAPHITE, HOLES (12) DIA 14 MM, STANDARD ASME B16.21, PCD 380 MM, Mnfr: SAUDI BISAN GASKET FACTORY Mnfr Part No: UNK, Suppl: OLAYAN DESCON ENGINEERING COMPANY Suppl P/N: UNK, MANDRG: 40052-M08-02 Rev: 1 Item: 45SAUDI BISAN GASKET FACTORY 
    45GASKET, PRE-CUT: TYPE FLAT RF, SIZE THK 1.6 MM, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, MATERIAL PTFE, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 300 LB, FFT: FLANGE STANDARD: ASME B16.5, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    47GASKET, PRE-CUT: TYPE FLAT RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 1 IN, SHAPE ROUND, MATERIAL NEOPRENE, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    29GASKET, PRE-CUT: TYPE FLAT RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, MATERIAL NEOPRENE, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    49GASKET, PRE-CUT: TYPE FLAT RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: FLANGE STANDARD: ASME B16.5, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    49GASKET, PRE-CUT: TYPE FLAT RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 6.6 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    50GASKET, PRE-CUT: TYPE FLAT RING RF, SIZE ID 114.3 X OD 174.8 X THK 1.5 MM, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL FLEXIBLE GRAPHITE WITH SS 316 CORRUGATED INSERT, PRESSURE RATING 150 LB, HOLES WITHOUT, FLANGE RATING 150 LB, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: UNK, Mnfr: JMC CORPORATION Mnfr Part No: KBR7027-050JMC CORPORATION
    29GASKET, PRE-CUT: TYPE FLAT RING RF, SIZE THK 1.5 MM, NOMINAL FLANGE SIZE 16 IN, SHAPE ROUND, MATERIAL GRAPHITE WITH SS 316 CORRUGATED INSERT, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD ASME B16.21-
    80GASKET, PRE-CUT: TYPE FLAT RING RF, SIZE THK 1.5 MM, NOMINAL FLANGE SIZE 16 IN, SHAPE ROUND, MATERIAL GRAPHITE WITH SS 316 CORRUGATED INSERT, STANDARD ASME B16.21, FLANGE RATING 300 LB-
    24GASKET, PRE-CUT: TYPE FLAT RING, SIZE ID 33 X OD 67 X THK 1.5 MM, SHAPE ROUND, MATERIAL GRAFOIL WITH SS 316 TANGED INSERT, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB-
    47GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 1.5 MM, NOMINAL FLANGE SIZE 30 MICROMETRE, SHAPE ROUND, MATERIAL GRAFOIL WITH SS 316 TANGED INSERT, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD ASME B16.21; ASME B16.5-
    37GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 1.6 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL GRAFOIL LAMINATE WITH SS 304/316 TANGED CORRUGATED INSERT, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: RAISED FACE; MATERIAL COATED WITH THK 0.005 IN, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/GRAP-316T/RF1.6/12-150GULF GASKET FACTORY
    26GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 1.6 MM, NOMINAL FLANGE SIZE 12 IN, SHAPE ROUND, MATERIAL GRAFOIL LAMINATE WITH SS 304/316 TANGED CORRUGATED INSERT, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 300 LB, FFT: RAISED FACE; MATERIAL COATED WITH THK 0.005 IN, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/GRAP-316T/RF1.6/12-300GULF GASKET FACTORY
    34GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 1/16 IN, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL PTFE REINFORCED, PRESSURE RATING 150 LB, STANDARD ASME B16.21, FLANGE RATING 150 LB-
    74GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 10 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: RAISED FACE, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/RF3/10-150GULF GASKET FACTORY
    92GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: RAISED FACE, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/RF3/3-150GULF GASKET FACTORY
    72GASKET, PRE-CUT: TYPE FLAT RING, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 8 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: RAISED FACE, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/CG/NEO-RBR/RF3/8-150GULF GASKET FACTORY
    19GASKET, PRE-CUT: TYPE FULL FACE, SIZE THK 1/8 IN, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, PRESSURE RATING 150 LB, FFT: 50 DUROMETER HARDNESS-
    344GASKET, PRE-CUT: TYPE RAISED FACE, NOMINAL FLANGE SIZE 3 IN, MATERIAL NEOPRENE RUBBER, PRESSURE RATING 150 LB, FFT: RO PARTS OF ROOF, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: 108895JANSENS & DIEPERINK B.V.
    24GASKET, PRE-CUT: TYPE RAISED FACE, SIZE THK 2 MM, NOMINAL FLANGE SIZE 1 IN, SHAPE ROUND, MATERIAL CARBON FIBER WITH NITRILE BUTADIENE RUBBER, PRESSURE RATING 300 LB, HOLES WITHOUT, FLANGE RATING 300 LB, FFT: COMPOSED OF A BLEND CONTAINING ARAMIDIC FIBERS (KELVAR) +/-5 PCT IN WT, CARBON FIBERS 20 PCT IN WT, MINERAL FIBERS, INORGANIC FILLERS AND NITRILE ELASTOMER; CODE 17GN, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    19GASKET, PRE-CUT: TYPE RAISED FACE, SIZE THK 3 MM, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, MATERIAL EXPANDED PTFE, PRESSURE RATING 150 LB, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: GORETEX GR SHEET; MATERIAL CODE 20G, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    51GASKET, PRE-CUT: TYPE RF, NOMINAL FLANGE SIZE 10 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER WHITE, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, Mnfr: HYUNWOO INDUSTRIAL CO. LTD. Mnfr Part No: BGP.A.250.011,  Suppl: DONG YANG P & F Suppl Part No: HW-DY-BGP.A.250.011HYUNWOO INDUSTRIAL CO. LTD.
    19GASKET, PRE-CUT: TYPE RF, NOMINAL FLANGE SIZE 2-1/2 IN, SHAPE RING, MATERIAL GRAFOIL WITH TANGED INSERT, STANDARD ASME B16.21, FLANGE RATING 300 LB, FFT: FOR FUEL SKID, Mnfr: IHI TRADING INC Mnfr Part No: 50000-09-04IHI TRADING INC
    29GASKET, PRE-CUT: TYPE RF, SIZE ID 27 X OD 66.5 X THK 3 MM, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, MATERIAL ARAMID FIBRE 120, HOLES WITHOUT, STANDARD ASME B16.21, FFT: FOR NOZZLE N25A-D, N25A-C, N25A-B, Mnfr: LARSEN & TOUBRO LIMITED Mnfr Part No: UNK, Mnfr: SPITMAAN MECHANICAL PACKING INDUSTRIES LTD Mnfr Part No: UNKSPITMAAN MECHANICAL PACKING INDUSTRIES LTD
    24GASKET, PRE-CUT: TYPE RF, SIZE ID 278 X OD 362 X THK 3 MM, SHAPE ROUND, MATERIAL GRAPHITE, HOLES WITHOUT MM, STANDARD ASME B16.21 , Mnfr: SAUDI BISAN GASKET FACTORY  Mnfr Part No: UNKSAUDI BISAN GASKET FACTORY 
    69GASKET, PRE-CUT: TYPE RF, SIZE ID 34 X OD 66 X THK 3 MM, NOMINAL FLANGE SIZE 1 IN, SHAPE ROUND, MATERIAL ARAMID FIBRE 120, HOLES WITHOUT, STANDARD ASME B16.21, FFT: FOR NOZZLE N6A-D, N22, N24 A-B, Mnfr: LARSEN & TOUBRO LIMITED Mnfr Part No: UNK, Mnfr: SPITMAAN MECHANICAL PACKING INDUSTRIES LTD Mnfr Part No: UNKSPITMAAN MECHANICAL PACKING INDUSTRIES LTD
    47GASKET, PRE-CUT: TYPE RF, SIZE ID 60 X OD 105 X THK 3 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL ARAMID FIBER 120, HOLES WITHOUT, STANDARD ASME B16.21, OEM: SPITMAAN MECHANICAL PACKING INDUSTRIES LTD OEM Part No: UNKNOWN, Mnfr: LARSEN & TOUBRO LIMITED Mnfr Part No: UNK, Suppl: LARSEN & TOUBRO LIMITED Suppl P/N: UNK, MANDRG: 570403-10/570404-10 / 570405-10 Rev: 0 Item: 1025 / 1013, 570401-10/570402-10 Rev: 0 Item: 1025 / 1013SPITMAAN MECHANICAL PACKING INDUSTRIES LTD
    75GASKET, PRE-CUT: TYPE RF, SIZE ID 60 X OD 111 X THK 3 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL ARAMID FIBRE 120, HOLES WITHOUT, STANDARD ASME B16.21, OEM: SPITMAAN MECHANICAL PACKING INDUSTRIES LTD OEM Part No: UNK, Mnfr: LARSEN & TOUBRO LIMITED Mnfr Part No: UNK, MANDRG: 570401-10 Rev: 0 Item: 1021, 570404-10 Rev: 0 Item: 1021, 570403-10 Rev: 0 Item: 1021, 570402-10 Rev: 0 Item: 1021LARSEN & TOUBRO LIMITED
    25GASKET, PRE-CUT: TYPE RF, SIZE ID 60.5 X OD 104.6 X THK 1.5 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL GRAPHITE WITH SS 316 METAL INSERT, PRESSURE RATING 150 LB, HOLES WITHOUT-
    170GASKET, PRE-CUT: TYPE RF, SIZE ID 60.5 X OD 111 X THK 3 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL ARAMID FIBRE 120, HOLES WITHOUT, STANDARD ASME B16.21, FFT: FOR NOZZLE N13A-B, N14A-D, N16A-F, N17E-F, N23, OEM: SPITMAAN MECHANICAL PACKING INDUSTRIES LTD OEM Part No: UNK, Mnfr: LARSEN & TOUBRO LIMITED Mnfr Part No: UNK, Suppl: LARSEN & TOUBRO LIMITED Suppl P/N: UNK, MANDRG: 570405-10 Rev: 0 Item: 1021SPITMAAN MECHANICAL PACKING INDUSTRIES LTD
    36GASKET, PRE-CUT: TYPE RF, SIZE ID 88.9 X OD 136.7 X THK 1.6 MM, NOMINAL FLANGE SIZE3 IN, SHAPE ROUND, MATERIAL PTFE, HOLESWITHOUT, STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: FOR PP PLANT PRODUCT HANDLING SYSTEM,FOR ASME B16.5 FLANGES, Mnfr: SOLITEC ENGINEERING LTD P/N: GAN-075-300-10P, DRAWING: 91182-00-012-S6 Rev: 0 Item: 8SOLITEC ENGINEERING LTD
    50GASKET, PRE-CUT: TYPE RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 1 IN, MATERIAL PTFE, PRESSURE RATING 150 LB, FFT: TCM CODE: GCX-4; STD/SERVICE: ANSI B16.21/B16.5; FOR PTA PLANT-
    35GASKET, PRE-CUT: TYPE RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, MATERIAL ARAMIDIC FIBER; NBR, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: COMPOSED OF A BLEND CONTAINING ARAMIDIC FIBERS (KELVAR) 12 PCT IN WT, MINERAL FIBERS INORGANIC FILLERS AND NITRILE ELASTOMER; CODE 17BA, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    49GASKET, PRE-CUT: TYPE RF, SIZE THK 2 MM, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, MATERIAL CARBON FIBER WITH NITRILE BUTADIENE RUBBER, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: CODE 17GN; COMPOSED OF A BLEND CONTAINING ARAMIDIC FIBERS (KELVAR) +/-5 PCT IN WT, CARBON FIBERS 20 PCT IN WT, MINERAL FIBERS, INORGANIC FILLERS AND NITRILE ELASTOMER. , Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    19GASKET, PRE-CUT: TYPE RF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 1-1/2 IN, SHAPE ROUND, MATERIAL EXPANDED PTFE, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: GORETEX GR SHEET; CODE 20G, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    19GASKET, PRE-CUT: TYPE RF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL EXPANDED PTFE, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: CODE 20G, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    19GASKET, PRE-CUT: TYPE RF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, MATERIAL EXPANDED PTFE, PRESSURE RATING 300 LB, STANDARD ASME, FLANGE RATING 300 LB, FFT: CODE: 20G, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    18GASKET, PRE-CUT: TYPE RF, SIZE THK 3 MM, NOMINAL FLANGE SIZE 6 IN, SHAPE ROUND, MATERIAL EPDM (FDA APPROVED), STANDARD ASME B16.21, FLANGE RATING 150 LB, FFT: FOR BLIND FLANGE, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: UNKJANSENS & DIEPERINK B.V.
    49GASKET, PRE-CUT: TYPE RF, SIZE THK 3.2 MM, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, MATERIAL CARBON FIBER; NBR, PRESSURE RATING 150 LB, FLANGE RATING 150 LB, FFT: COMPOSED OF A BLEND CONTAINING ARAMIDIC FIBERS (KELVAR) +/-5 PCT IN WT, CARBON FIBERS 20 PCT IN WT, MINERAL FIBERS, INORGANIC FILLERS AND NITRILE ELASTOMER; CODE 17GN, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    23GASKET, PRE-CUT: TYPE RF/FLAT, SIZE THK 2 MM, NOMINAL FLANGE SIZE 6 IN, SHAPE ROUND, MATERIAL NEOPRENE RUBBER, HOLES WITHOUT, STANDARD ASME B16.21, FLANGE RATING 300 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    49GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1 X OD 2-7/8 X 1/8 IN, SHAPE ROUND, MATERIAL PTFE WITH SS 304 PERFORATED INSERT, PRESSURE RATING 300 LB, HOLES WITHOUT, STANDARD Meet ANSI & MIL-P-22241, FLANGE RATING 300 LB, FFT: TEMP RANGE: -300 TO +400 DEG F; MAX PRES: 500 PSI; FDA COMPLIANT; FOR 1 IN. PIPE, SIZED TO FIT CLASS 300 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 5480K63, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    40GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1/2 X OD 2-1/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE WITH TYPE 304 SSTL PERFORATED INSERT, PRESSURE RATING 300 LB, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FLANGE RATING 300 LB, FFT: TEMP RANGE: -300 TO +400 DEG F; MAX PRES: 500 PSI; FOR 1/2 IN. PIPE, SIZED TO FIT CLASS 300 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 5480K61, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    49GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-1/16 X OD 2-1/4 X THK 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS. FOR 3/4 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 4459K52-
    30GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-1/16 X OD 2-1/4 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FLANGE RATING 150 LB, FFT: FOR SIZE 3/4 IN PIPE, SIZED TO FIT CLASS 150 FLANGES; CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE, Suppl: MCMASTER-CARR Suppl P/N: 9483K62, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    19GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-29/32 X OD 3-3/8 X THK 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS; COLOR: OFF-WHITE; FOR 1-1/2 IN. PIPE, SIZED TO FIT CLASS 150 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 4459K57-
    44GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-3/8 X OD 3-1/4 X 1/8 IN, SHAPE ROUND, MATERIAL PTFE WITH SS 304 PERFORATED INSERT, HOLES WITHOUT, FLANGE RATING 300 LB, FFT: TEMP RANGE: -300 TO +400 DEG F; MAX PRES: 500 PSI; FDA COMPLIANT, Suppl: MCMASTER-CARR Suppl P/N: 5480K64-
    46GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-5/16 X OD 2-5/8 X 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS. COLOR: OFF-WHITE; FOR 1 IN. PIPE, SIZED TO FIT CLASS 150 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 4459K53-
    25GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-5/16 X OD 2-5/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FLANGE RATING 150 LB, FFT: FOR SIZE: 1 IN PIPE, SIZED TO FIT CLASS 150 FLANGES; CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE, Suppl: MCMASTER-CARR Suppl P/N: 9483K63-
    25GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-5/8 X OD 3 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FFT: CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE; FOR SIZE: 1-1/4 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 9483K64, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    45GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 1-7/8 X OD 3-3/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FLANGE RATING 150 LB, FFT: CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE; FOR SIZE 1-1/2 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 9483K65-
    42GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 2 X OD 4-3/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE SS 304 PERFORATED INSERT, HOLES WITHOUT, FLANGE RATING 300 LB, FFT: TEMP RANGE: -300 TO +400 DEG F; MAX PRES: 500 PSI; FDA COMPLIANT, Suppl: MCMASTER-CARR Suppl P/N: 5480K66-
    19GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 2-3/8 X OD 4-1/8 X 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS. FOR 2 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 4459K54-
    20GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 2-3/8 X OD 4-1/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, HOLES WITHOUT, FFT: CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE; FOR SIZE: 2 IN PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 9483K66, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    45GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 27/32 X OD 1-7/8 X THK 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS; COLOR: OFF-WHITE; FOR 1/2 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 4459K51-
    29GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 3-1/2 X OD 5-3/8 X THK 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS; COLOR: OFF-WHITE; FOR 3 IN. PIPE, SIZED TO FIT CLASS 150 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 4459K58-
    20GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 3-1/2 X OD 5-3/8 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE, PRESSURE RATING 150 LB, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FLANGE RATING 150 LB, FFT: CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DETERGENTS; EMP RANGE: -350 TO +500 DEG F; COLOR: WHITE; FOR SIZE: 3 IN. PIPE, SIZED TO FIT CLASS 150 FLANGES, Suppl: MCMASTER-CARR Suppl P/N: 9483K68, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    29GASKET, PRE-CUT: TYPE RING FLANGE, SIZE ID 4-1/2 X OD 6-7/8 X THK 1/16 IN, SHAPE ROUND, MATERIAL ARAMID FIBER WITH SBR RUBBER BINDER, HOLES WITHOUT, FLANGE RATING 150 LB, FFT: RESIST WATER, SOME DETERGENTS, ALKALIES, OILS; COLOR: OFF-WHITE; FOR 4 IN. PIPE, SIZED TO FIT CLASS 150 FLANGE, Suppl: MCMASTER-CARR Suppl P/N: 4459K61-
    40GASKET, PRE-CUT: TYPE RING FLANGED, SIZE ID 1-1/2 X OD 3-3/4 X THK 1/8 IN, SHAPE ROUND, MATERIAL PTFE WITH SS 304 PERFORATED INSERT, HOLES WITHOUT, FLANGE RATING 300 LB, FFT: TEMP RANGE: -300 TO +400 DEG F; MAX PRES: 500 PSI; FDA COMPLIANT, Suppl: MCMASTER-CARR Suppl P/N: 5480K65, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    17GASKET, RING JOINT: SHAPE OCTAGONAL, CODE R16, SIZE DIA 1 IN, MATERIAL SS 304/V#7590, STANDARD ASME B16.20, PRESSURE RATING 1500 LB, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/RJ-OCT/SS304/R16, Mnfr: VALQUA Mnfr Part No: UNKGULF GASKET FACTORY
    35GASKET, RING JOINT: SHAPE OCTAGONAL, SIZE 1 IN, MATERIAL SS 304, STANDARD ASME B16.20, PRESSURE RATING 1500 LB, FFT: TYPE: SOLID METAL; MATERIAL: MAX 130 BRINELL HARDNESS-
    19GASKET, RING JOINT: SHAPE OCTAGONAL, SIZE 2 IN, MATERIAL SOFT IRON, STANDARD ASME B16.20, FFT: TYPE: SOLID METAL; MATERIAL: MAX 90 BRINELL HARDNESS-
    20GASKET, RING JOINT: SHAPE OVAL, CODE R-16, SIZE ID 42.85 X OD 58.75 MM, MATERIAL MO1/2PCT CR4-6PCT, STANDARD ASME B16.20, FFT: PRESSURE RATING AND FLANGE SIZE 1 IN; 300-600/900/1500LB, 3/4 IN 2500LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    65GASKET, RING JOINT: SHAPE OVAL, CODE R-20, SIZE ID 60.33 X OD 76.23 MM, MATERIAL SS 347H, STANDARD ASME B16.20, PRESSURE RATING 300 TO 1500 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    18GASKET, SPIRAL WOUND: APPLICATION GENERAL, FILLER THICKNESS 4.5 MM, WINDING MATERIAL 316L SS, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 316L, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3 IN, STANDARD ASME B 16.20, PRESSURE RATING 900 PSI, FFT: COLOR CODE: GREEN WITH GRAY STRIP ON OUTER EDGE OF CENTERING RING., Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL IMAN FACTORIES
    20GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER AND OUTER RING, APPLICATION WAX BLOW DOWN SEPARATOR, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 304L, FILLER MATERIAL GRAPHITE, INNER RING INSIDE DIAMETER 56 MM, INNER RING MATERIAL SS 304L, OUTER RING OUTSIDE DIAMETER 111 MM, OUTER RING MATERIAL SS 304, NOMINAL FLANGE SIZE 2 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20, FFT: CONNECTION: FLANGED RF, Mnfr: KUKIL INNTOT CO. LTD. Mnfr Part No: UNKKUKIL INNTOT CO. LTD.
    54GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER AND OUTER RING, FILLER INSIDE DIAMETER 190.1 MM, FILLER OUTSIDE DIAMETER 203.6 MM, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL PTFE/V#7590 OR EQ, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE , STANDARD ASME B16.20, PRESSURE RATING 150 LB, FFT: HOOP-SS316, GASKET SIZE : 6"", Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/NS-SPW/304OR-IR/TF-F/8X6-150GULF GASKET FACTORY
    18GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER AND OUTER RING, FILLER INSIDE DIAMETER 237.7 MM, FILLER OUTSIDE DIAMETER 254.1 MM, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL PTFE/V#7590 OR EQ, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, STANDARD ASME B16.20, PRESSURE RATING 150 LB, FFT: HOOP,GASKET SIZE : 8"", Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/NS-SPW/304OR-IR/TF-F/10X8-150GULF GASKET FACTORY
    94GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER AND OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE/V#7596 OR EQ, INNER RING MATERIAL SS 316, OUTER RING MATERIAL SS 316, SHAPE ROUND, NOMINAL FLANGE SIZE 1/2 IN, STANDARD ASME B16.20, PRESSURE RATING 600 LB, FFT: HOOP, Mnfr: VALQUA Mnfr Part No: UNK, Mnfr: GULF GASKET FACTORY Mnfr Part No: GGF/SPW/316OR-IR/TF-F/0.5-600GULF GASKET FACTORY
    63GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER AND OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL PTFE (V#7596), INNER RING MATERIAL SS 316, OUTER RING MATERIAL SS 316, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, PRESSURE RATING 600 LB, STANDARD ASME B16.20-
    17GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER RING, APPLICATION CHECK VALVE COVER IN, FILLER OUTSIDE DIAMETER 239 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, INNER RING INSIDE DIAMETER 196 MM, NOMINAL FLANGE SIZE 6 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, FFT: CONNECTION: RF, Mnfr: TY VALVE CORPORATION Mnfr Part No: UNK,  Reference No: 6153-GTY VALVE CORPORATION
    23GASKET, SPIRAL WOUND: TYPE BASIC WITH INNER RING, APPLICATION PH DEHYDRATION TOWER REBOILER, FILLER INSIDE DIAMETER 376 MM, FILLER OUTSIDE DIAMETER 428 MM, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, INNER RING INSIDE DIAMETER 356 MM, INNER RING MATERIAL SS 304, SHAPE ROUND, STANDARD ASME B16.20, OEM: IL SUNG ENGINEERING CO LTD. OEM Part No: UNK, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: UNK, MANDRG: VP-1300-209-001-E-91510/92510-102 Rev: 5 Item: 6JEIL E & S Co. Ltd
    44GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 1-1/4 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    44GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 1-1/4 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    44GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 1-1/4 IN, SHAPE ROUND, PRESSURE RATING 600 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    19GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 18 IN, SHAPE ROUND, PRESSURE RATING 600 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    44GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3-1/2 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    44GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3-1/2 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    19GASKET, SPIRAL WOUND: TYPE BASIC WITH OUTER RING, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316L, FILLER MATERIAL GRAPHITE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3-1/2 IN, SHAPE ROUND, PRESSURE RATING 600 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    48GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, APPLICATION LARGE TONGUE AND GROOVE, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, PRESSURE RATING 600 LB, FFT: OD 34.9 X ID 25.4 MM,, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  Reference No: 1/2X600-LTG Mnfr: AL-IMAN FACTORIESAL-IMAN FACTORIES
    30GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, APPLICATION LARGE TONGUE AND GROOVE, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, PRESSURE RATING 300 LB, FFT: OD 127 X ID 108 MM,, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  Reference No: 3X300-LTG Mnfr: AL-IMAN FACTORIESAL-IMAN FACTORIES
    48GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, APPLICATION LARGE TONGUE AND GROOVE, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, OUTER RING MATERIAL CS, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, PRESSURE RATING 300 LB, FFT: OD 42.9 X ID 33.3 MM, , Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  Reference No: 3/4X300-LTG Mnfr: AL-IMAN FACTORIESAL-IMAN FACTORIES
    83GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, APPLICATION TONGUE AND GROOVE FLANGE, FILLER INSIDE DIAMETER 25 MM, FILLER OUTSIDE DIAMETER 35.30 MM, FILLER THICKNESS 2.50 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, PRESSURE RATING 300 LB-
    52GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, APPLICATION TONGUE AND GROOVE FLANGE, FILLER INSIDE DIAMETER 33 MM, FILLER OUTSIDE DIAMETER 43.20 MM, FILLER THICKNESS 2.50 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, PRESSURE RATING 300 LB, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK, Mnfr: GULF GASKET FACTORY Mnfr Part No: UNKGULF GASKET FACTORY
    30GASKET, SPIRAL WOUND: TYPE BASIC WITHOUT INNER AND OUTER RING, FILLER INSIDE DIAMETER 25.4 MM, FILLER OUTSIDE DIAMETER 35 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, PRESSURE RATING 600 LB, STANDARD ASME B16.20-
    22GASKET, SPIRAL WOUND: TYPE BASIC WTH INNER AND OUTER RING, FILLER INSIDE DIAMETER 7.19 IN, FILLER OUTSIDE DIAMETER 8.25 IN, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL PTFE, INNER RING INSIDE DIAMETER 6.19 IN, INNER RING THICKNESS 0.112-0.131 IN, INNER RING MATERIAL SS 316, OUTER RING OUTSIDE DIAMETER 8.75 IN, OUTER RING THICKNESS 0.112-0.131 IN, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE 6 IN, STANDARD API 601; ASME B16.20, PRESSURE RATING 150 LB, Mnfr: KOREA FUJI PACKING CO. LTD. Mnfr Part No: UNK, Suppl: HANJOO MACHINE INDUSTRIAL CO. LTD. Suppl P/N: UNKKOREA FUJI PACKING CO. LTD.
    17GASKET, SPIRAL WOUND: TYPE BASIC WTH OUTER RING, APPLICATION PIPING, FILLER INSIDE DIAMETER 155.7 MM, FILLER OUTSIDE DIAMETER 177.8 MM, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL GRAPHITE, OUTER RING OUTSIDE DIAMETER 196.9 MM, OUTER RING THICKNESS 3.2 MM, NOMINAL FLANGE SIZE 5 IN, OUTER RING MATERIAL CS, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, FFT: FOR SEALLESS PUMP, Mnfr: AL-IMAN FACTORIES Mnfr Part No: ISW3-0125S6G10100, OEM: NIKKISO CO LTD OEM Part No: C11035,  Tag/Equip No: 1P8404A/B,  Equip Serial No: EK66E7004A-1~2,  Equip Model No: HN46B-J1NIKKISO CO LTD
    55GASKET, SPIRAL WOUND: TYPE BASIC, APPLICATION FORGED GATE, GLOBE AND CHECK VALVE, FILLER INSIDE DIAMETER 31 MM, FILLER OUTSIDE DIAMETER 40 MM, FILLER THICKNESS 3.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL GRAPHITE, SHAPE ROUND, NOMINAL FLANGE SIZE 3/4 IN, STANDARD ASME B16.20, PRESSURE RATING 150-800 LB, FFT: FOR STEM AND SEAT, Mnfr: LVF ITALY Mnfr Part No: 401LVF ITALY
    25GASKET, SPIRAL WOUND: TYPE BASIC, APPLICATION SWIING CHECK VALVE, WINDING MATERIAL SS 316, FILLER MATERIAL GRAPHITE, SHAPE ROUND, NOMINAL FLANGE SIZE 2 IN, STANDARD ASME B16.20, PRESSURE RATING 150 LB, FFT: VALVE MATERIAL: CS ASTM A105, Mnfr: OMB VALVES SPA Mnfr Part No: 28407460, Suppl: LOCKWOOD INTERNATIONAL INC Suppl P/N: UNKOMB VALVES S.P.A.
    19GASKET, SPIRAL WOUND: TYPE BASIC, APPLICATION TEAL FILTER, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, SHAPE ROUND, NOMINAL FLANGE SIZE 1/2 IN, STANDARD ASME B16.20, PRESSURE RATING 300 LB, Mnfr: JEIL E & S Co. Ltd Mnfr Part No: UNK, Suppl: JFC CORPORATION-KOREA Suppl P/N: JIC 3804-TF-1/2JEIL E & S Co. Ltd
    28GASKET, SPIRAL WOUND: TYPE BASIC, APPLICATION VALVE, FILLER INSIDE DIAMETER 31 MM, FILLER OUTSIDE DIAMETER 39 MM, WINDING MATERIAL SS 316, FILLER MATERIAL GRAPHITE, SHAPE ROUND, STANDARD ASME B16.20, FFT: FOR FORGED STEEL VALVE 3/4 X 1/2 IN, Mnfr: CARRARA S.P.A. Mnfr Part No: 252/22-G1CARRARA S.P.A.
    38GASKET, SPIRAL WOUND: TYPE BASIC, APPLICATION VALVE, FILLER INSIDE DIAMETER 40 MM, FILLER OUTSIDE DIAMETER 48.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL GRAPHITE, SHAPE ROUND, STANDARD ASME B16.20, FFT: FOR FORGED STEEL VALVE 1 IN, Mnfr: CARRARA S.P.A. Mnfr Part No: 254/22-G1CARRARA S.P.A.
    17GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 108 MM, FILLER OUTSIDE DIAMETER 127 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  MTC REQUIRED ALONG WITH THE MATERIALAL-IMAN FACTORIES
    17GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 108 MM, FILLER OUTSIDE DIAMETER 127 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 3 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  MTC REQUIRED ALONG WITH THE MATERIALAL-IMAN FACTORIES
    17GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 131.8 MM, FILLER OUTSIDE DIAMETER 157.2 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  MTC REQUIRED ALONG WITH THE MATERIALAL-IMAN FACTORIES
    17GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 131.8 MM, FILLER OUTSIDE DIAMETER 157.2 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 4 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNK,  MTC REQUIRED ALONG WITH THE MATERIALAL-IMAN FACTORIES
    17GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 33.3 MM, FILLER OUTSIDE DIAMETER 42.9 MM, FILLER THICKNESS 3.2 MM, WINDING MATERIAL SS 304, FILLER MATERIAL PTFE, NOMINAL FLANGE SIZE 3/4 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, Mnfr: AL-IMAN FACTORIES Mnfr Part No: UNKAL-IMAN FACTORIES
    23GASKET, SPIRAL WOUND: TYPE BASIC, FILLER INSIDE DIAMETER 35.7 MM, FILLER OUTSIDE DIAMETER 25 MM, FILLER THICKNESS 4.5 MM, WINDING MATERIAL SS 316, FILLER MATERIAL PTFE/V#7590, NOMINAL FLANGE SIZE 1/2 IN, SHAPE ROUND, PRESSURE RATING 150 LB, STANDARD ASME B16.20, , MNFR: GULF GASKET FACTORY MNFR PART NO: GGF/SPW-BT/316W-TFF/0.5-300, MNFR: VALQUA MNFR PART NO: UNKVALQUA
    34GASKET, SPIRAL WOUND: TYPE WITH INNER AND OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL GRAPHIITE, INNER RING INSIDE DIAMETER 654.1 MM, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, NOMINAL FLANGE SIZE 26 IN, SHAPE ROUND, PRESSURE RATING 300 LB, STANDARD ASME B16.20 FOR USE WITH ASME B16.47 SERIES A FLANGE, FFT: FOR K-28401 SUCTION LINE-
    18GASKET, SPIRAL WOUND: TYPE WITH INNER RING & OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 304, OUTER RING MATERIAL CS, SHAPE ROUND, NOMINAL FLANGE SIZE 42 IN, STANDARD ASME B16.20; ASME B16.47 CLASS B, PRESSURE RATING 150 LB-
    17GASKET, SPIRAL WOUND: TYPE WITH INNER RING & OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE 1-1/4 IN, STANDARD ASME B16.20, PRESSURE RATING 600 LB-
    24GASKET, SPIRAL WOUND: TYPE WITH INNER RING & OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE 2-1/2 IN, STANDARD ASME B16.20, PRESSURE RATING 600 LB-
    17GASKET, SPIRAL WOUND: TYPE WITH INNER RING & OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE 28 IN, STANDARD ASME B16.20; ASME B16.47 CLASS A, PRESSURE RATING 300 LB-
    50GASKET, SPIRAL WOUND: TYPE WITH INNER RING & OUTER RING, WINDING MATERIAL SS 304, FILLER MATERIAL FLEXIBLE GRAPHITE, INNER RING MATERIAL SS 304, OUTER RING MATERIAL SS 304, SHAPE ROUND, NOMINAL FLANGE SIZE 3-1/2 IN, STANDARD ASME B16.20, PRESSURE RATING 300 LB-
    47GASKET: MATERIAL RUBBER, APPLICATION BREATHING REGULATOR, FFT: SOURCE: GASKET. REPLACEMENT PARTS FOR BREATHING REGULATOR (804370-SERIES)., Mnfr: SCOTT USA Mnfr Part No: 10005368SCOTT USA
    30GASKET: MATERIAL RUBBER, HOLES WITHOUT, FFT: FOR HOUSING/GUARDS, TRAVELING SCREEN, Mnfr: SIEMENS WATER TECHNOLOGIES Mnfr Part No: 0924-004-003, MANDRG: JY24935 Rev: 0SIEMENS WATER TECHNOLOGIES
    40GASKET: SIZE ID 30 X OD 45 MM, SHAPE ROUND, HOLES WITHOUT, APPLICATION PUSH BUTTON 800H-AR, Mnfr: ALLEN BRADLEY Mnfr Part No: F-14963ALLEN BRADLEY
    186GASKET: SIZE ID 35 X OD 40 MM, SHAPE ROUND, HOLES WITHOUT, APPLICATION AIR COOLED HEAT EXCHANGER, FFT: CONSISTS OF: GASKET AND PLUG (STEEL ASTM A1008/A366 HOT DIPPED GALVANIZED G40), MNFR: HUDSON PRODUCTS CORPORATION MNFR PART NO: 28062HUDSON PRODUCTS CORPORATION
    25GASKET: SIZE ID 35.5 X OD 41.5 MM, APPLICATION CONTROL VALVE, FFT: SUITABLE FOR CONTROL VALVE SIZE 1/2 AND 3/4 IN, Mnfr: FISHER-BAUMANN Mnfr Part No: 24000-133, Reference No: 24000SVFEMERSON - FISHER
    249GASKET: THICKNESS 2 MM, SIZE ID 28.8 X OD 36 MM, MATERIAL SS 304, SHAPE ROUND, Mnfr: S&T CORPORATION Mnfr Part No: SA-2-28.8-36, Suppl: CTCI MACHINERY CORPORATION. Suppl P/N: PG-41221-6, MANDRG: V-E41221-DTL-001 Rev: 4 Item: 6S&T CORPORATION
    319GASKET: THICKNESS 2 MM, SIZE ID 31.9 X OD 40 MM, MATERIAL SS 304, SHAPE ROUND, Mnfr: S&T CORPORATION Mnfr Part No: SA-2-31.9-40, Suppl: CTCI MACHINERY CORPORATION. Suppl P/N: PG-41311-6, MANDRG: V-E41311-DTL-001 Rev: 5 Item: 6S&T CORPORATION
    20GASKET: TYPE PLUG, THICKNESS 1.5 MM, SIZE ID 29 X OD 35 MM, MATERIAL ARMCO (HB 120 MAX), SHAPE ROUND, HOLES WITHOUT HOLES, APPLICATION AIR CONDENSER TUBE, Mnfr: OLMI SPA Mnfr Part No: UNK, Suppl: GEA TECHNOFRIGO DELLORTO Suppl P/N: 270042FU304BOLMI SPA
    49GASKET: TYPE RING FLANGE, THICKNESS 1/8 IN, SIZE ID 7/8 X OD 1-7/8 IN, MATERIAL PTFE, SHAPE ROUND, HOLES WITHOUT, STANDARD MEET ANSI AND MIL-P-22241, FFT: FOR SIZE: 1/2 INCH PIPE; SIZED TO FIT CLASS 150 FLANGES; CHEMICALLY INERT; RESISTS ACID, ALKALIES, SALTS, WATER, STEAM, GREASE, OIL AND DTERGENTS; TEMP RANGE: -350 TO +500 DEG F; COLOR: WHITE, Suppl: MCMASTER-CARR Suppl P/N: 9483K61, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    73GASKET: TYPE TAPE, THICKNESS 3   MM, SIZE WD 25 MM, MATERIAL EXPANDED PTFE, Mnfr: KOCH-GLITSCH Mnfr Part No: GKT-761G11804KOCH-GLITSCH
    58GASKET: TYPE TAPE, THICKNESS 3 MM, SIZE WD 32 MM, MATERIAL PTFE, Mnfr: KOCH-GLITSCH Mnfr Part No: GKT-761G11805KOCH-GLITSCH
    17GAUGE, PRESSURE: TYPE BOURDON, RANGE 0-1.6 BAR, DIAL SIZE 4.5 IN, CONNECTION MNPT 1/2 IN, CASE MATERIAL REINFORCED POLYPROPYLENE, ELEMENT MATERIAL SS 316, CONNECTION MATERIAL SS 316, CONNECTION LOCATION BOTTOM, MOUNT FLUSH/STEM/SURFACE, STANDARD CE, Mnfr: ASHCROFT INC Mnfr Part No: 45-1279-SS-04L-C4ASHCROFT INC
    65GLAND, CABLE: MATERIAL BRASS, HUB SIZE M40/50, CONNECTION NPT, CLASSIFICATION EEXD/EEXE, FFT: FOR (MATERIAL: EAD SHEATH SWA), Mnfr: HAWKE INTERNATIONAL Mnfr Part No: 501-453-1.5, Mnfr: LEONI KERPEN GMBH Mnfr Part No: 7-E2FW40/50SHAWKE INTERNATIONAL
    18GLAND, CABLE: MATERIAL BRASS, HUB SIZE M50, CONNECTION NPT, CLASSIFICATION EXD/EEXE, FFT: FOR (MATERIAL: SWA), Mnfr: HAWKE INTERNATIONAL Mnfr Part No: 501-453-2, Mnfr: LEONI KERPEN GMBH Mnfr Part No: 7-E1FW50SMHAWKE INTERNATIONAL
    18GLAND, CABLE: MATERIAL NICKLE PLATED BRASS, FFT: PANEL HOLE SIZE 28.3 MM; IP RATING: IP65,  Suppl: RS COMPONENTS LTD Suppl Part No: 390-599 PG21-
    48GLAND, CABLE: TYPE ARMOURED, MATERIAL BRASS NI PLATED, HUB SIZE M50, CONNECTION NPT 1-1/2 X 2 IN, CLASSIFICATION ATEX  II 2 GD, EX D IIC, EX D II, EX TD A21, STANDARD CE, FFT: WITH LOCKNUTS AND WASHER; WITH OUT SHROUD, Mnfr: CMP PRODUCTS Mnfr Part No: E1FW/M50CMP PRODUCTS
    19GLAND, CABLE: TYPE ARMOURED, SIZE 63S, MATERIAL BRASS NI PLATED, HUB SIZE M63, CONNECTION NPT 2 X 2-1/2 IN, CLASSIFICATION ATEX  II 2 GD, EX D IIC, EX D II, EX TD A21, STANDARD CE, FFT: WITH LOCKNUTS AND WASHER; WITH OUT SHROUD, Mnfr: CMP PRODUCTS Mnfr Part No: E1FW/M63SCMP PRODUCTS
    48GLAND, CABLE: TYPE CW, SIZE 240 MM2, MATERIAL ELECTROLESS NICKEL PLATED BRASS, CONNECTION FNPT, STANDARD EN 50262, Mnfr: CMP CORPORATION Mnfr Part No: 63SB3501RA5CMP CORPORATION
    25GLAND, CABLE: TYPE TRI-STAR, MATERIAL BRASS NICKEL PLTD, HUB SIZE M40, CONNECTION MNPT, CLASSIFICATION EXD I/II C; EXE I/II; EXNR II; EXTD A21 IP66, STANDARD CE; CSA; UL, FFT:WITH DELUGE SEAL EXD/EXE/EXNR COMPLETE WITH EARTH TAG AND LOCKNUT, MNFR: CMP CORPORATION MNFR PART NO: 40SE1FW1RA5CMP CORPORATION
    43GLAND: TYPE NUT, SIZE 3/8 IN, MATERIAL SS 316, FFT: A18903, EQPT. TAG# GENERAL USE FOR LDPE, Mnfr: AUTOCLAVE ENGINEERS INC Mnfr Part No: 980-00-534, Mnfr: AUTOCLAVE ENGINEERS INC Mnfr Part No: AGL60,  Suppl: ABDUL KAREEM TRADING EST. Suppl Part No: UNKNOWN,  Reference No: 990-00534 Mnfr: AUTOCLAVE ENGINEERS INCAUTOCLAVE ENGINEERS INC
    18GLAND: TYPE PISTON ROD, SIZE OD 190 X ID 125 MM, MATERIAL SS EN10088-1, FFT: GLAND CHAMBER NO.2, Mnfr: BURCKHARDT COMPRESSION Mnfr Part No: 000.630.782.301, Mnfr Drg 126 000 341 Rev: 4 Item No: C50116,  Equip Serial No: 101051,  Equip Model No: 4D375B-3B_1BURCKHARDT COMPRESSION
    28GLASS, LEVEL GAUGE: MATERIAL BROSILICATE, Mnfr: SAMIL INDUSTRY CO. LTD. Mnfr Part No: SICS-03-02-04, Suppl: IHI TRADING INC Suppl P/N: 6BA07-08-001SAMIL INDUSTRY CO. LTD.
    20GLASS, LEVEL GAUGE: TYPE REFLEX, SIZE WD 34 X LG 340 X THK 17 MM, RATING 340BAR AT 400DEG C, MATERIAL BOROSILICATE GLASS, COLOR TRANSPARENT, SHAPE OBROUND, STANDARD DIN 7081, FFT: WITH GASKET (CUSHION/SEALING JOINT), Mnfr: ALLIGATOR Mnfr Part No: PX300340,  Model/Machine No: B-IX Mnfr: KLINGERALLIGATOR
    28GLASS, SIGHT: MATERIAL GLASS, COLOR WHITE, SHAPE ROUND, FFT: WITH COVER, FOR 1EG/UTL TRANSMITTER., Mnfr: YOKOGAWA ELECTRIC CORPORATION. Mnfr Part No: F9341FMYOKOGAWA ELECTRIC CORPORATION
    18GLASS, SIGHT: SIZE DIA 58 X THK 9 MM, COLOR CLEAR, SHAPE ROUND, FFT: FOR HOT OIL HEATER, Mnfr: KANGWON B&E CO. LTD. Mnfr Part No: BO-94501/94511-003KANGWON B&E CO. LTD.
    32GLOVES: SIZE 11, LENGTH 356 MM, MATERIAL NYLON, COLOR BURGUNDY WITH BLANK HAND, CUFF GAUNLET, FFT: ALPHA TEC; GRIP DESIGN: TEXTURED; 6 PAIRS IN ONE BAG, Mnfr: ANSELL LIMITED Mnfr Part No: 58-535/11,  PROVIDE THE CERTIFICATEANSELL LIMITED
    67GLOVES: SIZE 7 (S), LENGTH 356 MM, MATERIAL NYLON, COLOR BURGUNDY WITH BLANK HAND, CUFF GAUNLET, FFT: ALPHA TEC; GRIP DESIGN: TEXTURED; 6 PAIRS IN ONE BAG, Mnfr: ANSELL LIMITED Mnfr Part No: 58-535-8 (M),  PROVIDE THE CERTIFICATEANSELL LIMITED
    31GLOVES: TYPE FULLY COATED LONG SLEEVE, SIZE 10, LENGTH 350 MM, MATERIAL INTER LOCK COTTON, COLOR GREEN, CUFF GAUNLET, FFT: SCORPIO; GRIP DESIGN: ROUGH; 12 PAIR IN A BAG, Mnfr: ANSELL LIMITED Mnfr Part No: 08-354/10ANSELL LIMITED
    25GUARD: TYPE LIGHTING, MATERIAL CU-FREE AL, APPLICATION VMV LAMP 70W AND150W, STANDARD NEC, Mnfr: COOPER CROUSE HINDS Mnfr Part No: P21COOPER CROUSE HINDS
    108HEAD: TYPE COLLECTOR, MATERIAL POLYPENCO ULTRAWEAR, Mnfr: PLENTY FILTERS Mnfr Part No: 0796305703, MANDRG: 0796300701 Rev: 3 Item: 32PLENTY FILTERS
    20HEAD: TYPE THERMOCOUPLE DOUBLE TERMINAL, SIZE NPT 1/2 IN, STANDARD FM; CSA, FFT:, MNFR: THERMO ELECTRIC COMPANY INC MNFR PART NO: XD-AD,  CATALOGUE NO: 14447THERMO ELECTRIC COMPANY INC
    82HELMET: TYPE PROTECTIVE FIRE, MATERIAL DURAGLASS FIBERGLASS COMPOSITE SHELL, STANDARD NFPA 1971-2007, FFT: YELLOW COLOR; GLASS-FILLED POLYMER FACESHIELD/GOGGLE HARDWARE; ULTRA HIGH-TEMPERATURE (TPR) EDGE TRIM; NOMEX CHINSTRAP WITH ONE-HAND QUICK RELEASE BUCKLE; POSTMAN SLIDE FOR QUICK ADJUSTMENT; NOMEX/PBI/KEVLAR EARLAP FOR NECK/EAR PROTECTION, HIGH-TEMPERATURE FOAM CAP FOR THERMAL AND IMPACT PROTECTION, EXCLUSIVE SCBA INTERFACE FRONT HEADBAND ADJUSTMENT TO FIT ANY SCBA MASK, THREE-POSITIONREAR RATCHET HEIGHT ADJUSTMENT ENSURES FIT FOR ALL HEAD SIZES BETWEEN 6-3/8 AND 8-3/8 IN, REMOVABLE FLANNEL/LEATHER CUSHION LINERS FOR WASHING AND UPGRADING, Mnfr: CAIRNS & BROTHER INC Mnfr Part No: 660CFSY,  Model/Machine No: 660 CR METRO,  MTC REQUIREDCAIRNS & BROTHER INC
    25HOLDER, FUSE: VOLTAGE 600 VAC, AMPERAGE 30 A, FUSE SIZE DIA 10.4 X LG 38.1 MM, MOUNT DIN RAIL, STANDARD CSA; UL, FFT: POLE: 3, Mnfr: MARC-CLIMATIC CONTROLS INC. Mnfr Part No: UNK, Mnfr: FERRAZ SHAWMUT Mnfr Part No: USCC3, Suppl: SIEMENS LIMITED Suppl P/N: UNKMARC-CLIMATIC CONTROLS INC.
    30HOLDER: TYPE RETAINING CLIP, MATERIAL PLASTIC, FFT: RETAINING CLIP ""CR-MH"" FOR CR-M SOCKET DIN), CR-MH, Mnfr: ABB ELECTRICAL INDUSTRIES CO. LTD. Mnfr Part No: 1SVR 405 659 R1000, Model/Machine No: CR-M Mnfr: ABBABB ELECTRICAL INDUSTRIES CO. LTD.
    600HOOK: TYPE S-SHAPED, MATERIAL SS DIN WN 1.4301, Mnfr: FAUDI Mnfr Part No: 8852006, Suppl: KOBELCO (KOBE STEEL, LTD. ) Suppl P/N: AE-PS14EK#13FAUDI
    48INSERT, COUPLING: TYPE FLEXIBLE, FFT: FOR 513-K-02,PP NITROGEN COMPRESSOR,MDL 3EHA4GT,SER NO. 9908CR, Mnfr: HOWDEN Mnfr Part No: UNKNOWN, Mnfr: UNKNOWN Mnfr Part No: 37530, Mnfr: BRAN+LUEBBE Mnfr Part No: SM 70, Mnfr: MOLSET Mnfr Part No: SM70MOLSET
    34INSERT, CUTTING TOOL: TYPE CIRCLIP GROOVES, SIZE WD 0.60 X LG 9 MM, THICKNESS 0.40 MM, MATERIAL HARDENED STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: GX 09-1S0.60 L WTA 33,  MTC REQUIORED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE CIRCLIP GROOVES, SIZE WD 0.80 X LG 16 MM, THICKNESS 0.60 MM, MATERIAL HARDENED STEEL COATED CARBIDE, , MNFR: WALTER MNFR PART NO: GX 16-2S0.80 R WTA  33,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE GROOVING, SHAPE RECTANGULAR, MATERIAL HARDENED STEEL COATED CARBIDE, RADIUS 0.15 MM, FFT: CLEARANCE ANGLE: 7 DEG, Mnfr: WALTER Mnfr Part No: FX 2.2 NO.15-F1 WTA 33, Mnfr: WALTER Mnfr Part No: FX2.2-E220N015-CE6 WPP23,  Reference No: FX 2.2 NO.15-F1 RDS WTA 33,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE GROOVING, SHAPE RECTANGULAR, MATERIAL HARDENED STEEL COATED CARBIDE, RADIUS 0.80 MM, FFT: CLEARANCE ANGLE: 6 DEGREE; DEPTH OF CUT: 5MM; GROOVE WIDTH: 8MM; NO.OF TEETH:1, Mnfr: WALTER Mnfr Part No: LX E8.00NO.80-M2 WTA 33, Mnfr: WALTER Mnfr Part No: LX E8.00NO80-UE4 WPP33,  Reference No: LX E8.00NO.80-M2 RDS WTA 33,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE GROOVING, SHAPE RECTANGULAR, MATERIAL HARDENED STEEL COATED CARBIDE, RADIUS 4.0 MM, FFT: CLEARANCE ANGLE: 6 DEGREE; DEPTH OF CUT: 5MM; GROOVE WIDTH: 8MM, Mnfr: WALTER Mnfr Part No: LX R4.00N-M3 WTA 33,  Reference No: LX R4.00N-M3 RDS WTA 33,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SHAPE OCTAGON, THICKNESS 5.56 MM, MATERIAL SS CARBIDE COATED, RADIUS 0.8 MM, FFT: CORNER FACET WIDTH: 1.6MM; CLEARANCE ANGLE 15 DEG, Mnfr: WALTER Mnfr Part No: ODHT 0605 ZZN-F57 WSM 35,  Reference No: ODHT 0605 ZZN-F57 RDS WSM 35,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE MILLING, SHAPE POSITIVE RHOMBIC, SIZE SQ 8.3 MM, THICKNESS 3.18 MM, MATERIAL STEEL COATED CARBIDE, RADIUS 0.5 MM, FFT:CUTTING EDGE: 2 MM; CLEARANCE ANGLE: 11 DEG, MNFR: WALTER MNFR PART NO: MPMX 080305-F57 WAK 25,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SHAPE POSITIVE RHOMBIC, SIZE WD 6.26 X LG 8 MM, THICKNESS 3.35 MM, MATERIAL STAINLESS STEEL COATED CARBIDE, RADIUS 0.8 MM, FFT:ANGLE CHAMFER: 90 DEG, MNFR: WALTER MNFR PART NO: ADMT 080304 R-F56 WSM 35,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SHAPE POSITIVE ROUND, SIZE ID 5.5 X OD 16 MM, THICKNESS 5.56 MM, MATERIAL AL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: RDGT 1605 MO-G88 WXN 15,  Reference No: RDGT 1605 MO-G88 RDS WXN 15,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE MILLING, SHAPE ROUND POSITIVE, SIZE ID 5.5 X OD 15 MM, THICKNESS 5.56 MM, MATERIAL STEEL COATED CARBIDE, FFT:CLEARANCE ANGLE: 15 DEG, MNFR: WALTER MNFR PART NO: RDHW 1505MO-A57 WKP 25,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE MILLING, SHAPE ROUND POSITIVE, SIZE ID 6.5 X OD 20 MM, THICKNESS 6.35 MM, MATERIAL STEEL COATED CARBIDE, FFT:CLEARANCE ANGLE: 15 DEG, MNFR: WALTER MNFR PART NO: RDHW 2006MO-A57 WKP 25,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SIZE WD 13 X LG 12 MM, THICKNESS 6.5 MM, MATERIAL STEEL COATED CARBIDE, RADIUS 0.8 MM, FFT:CORNER FACET WIDTH: 1.5 MM, MNFR: WALTER MNFR PART NO: CNHU 1206 PPN-D57T WKP 25,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SIZE WD 6.26 X LG 8 MM, THICKNESS 3.35 MM, MATERIAL SS COATED CARBIDE, RADIUS 0.8 MM, FFT:ANGLE CHAMFER: 90 DEG, MNFR: WALTER MNFR PART NO: ADMT 080304 L-F56 WSM 35,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE MILLING, SIZE WD 8.4 X LG 13.6 MM, THICKNESS 4.76 MM, MATERIAL AL COATED CARBIDE, RADIUS 0.8 MM, FFT: ANGLE CHAMFER: 90DEG, Mnfr: WALTER Mnfr Part No: ADHT 1204 PER-G88 WXN 15,  Reference No: ADHT 1204 PER-G88 RDS WXN 15,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE SLITTING, THICKNESS 4.65 MM, MATERIAL CI COATED CARBIDE, RADIUS 0.2 MM, FFT: NO OF TEETH: 1, Mnfr: WALTER Mnfr Part No: NSM 3.90030SN-GDW WAK 25,  Reference No: NSM 3.90030SN-GDW RDS WAK 25,  MTC REQUIRED ALONG WITH MATERIALWALTER
    25INSERT, CUTTING TOOL: TYPE TURNING, SHAPE DIAMOND, SIZE WD 0.250 X LG 0.254 IN, THICKNESS 0.094 IN, MATERIAL CI COATED CARBIDE, RADIUS 0.016 IN, FFT: ANGLE 80 DEG; MACHINING METHOD: SEMI-FINISHING, Mnfr: WALTER Mnfr Part No: CCMT 060204-PS5 WAK 10,  Reference No: CCMT 060204-PS5 RDS WAK 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    25INSERT, CUTTING TOOL: TYPE TURNING, SHAPE DIAMOND, SIZE WD 0.250 X LG 0.305 IN, THICKNESS 0.094 IN, MATERIAL STEEL COATED CARBIDE, RADIUS 0.008 IN, FFT: ANGLE 55 DEG; MACHINING METHOD: FINISHING, Mnfr: WALTER Mnfr Part No: DCMT 070202-PF4 WPP 10,  Reference No: DCMT 070202-PF4 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    25INSERT, CUTTING TOOL: TYPE TURNING, SHAPE DIAMOND, SIZE WD 0.250 X LG 0.305 IN, THICKNESS 0.094 IN, MATERIAL STEEL COATED CARBIDE, RADIUS 0.016 IN, FFT: ANGLE 55 DEG; MACHINING METHOD: FINISHING, Mnfr: WALTER Mnfr Part No: DCMT 070204-PF WPP 01,  Reference No: DCMT 070204-PF RDS WPP 01,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE DIAMOND, SIZE WD 0.500 X LG 0.610 IN, THICKNESS 0.250 IN, MATERIAL CAST IRON COATED CARBIDE, RADIUS 0.047 IN, FFT: ANGLE 55 DEG, Mnfr: WALTER Mnfr Part No: DNMA 150612 WAK 10,  Reference No: DNMA 150612 RDS WAK 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.236 IN, THICKNESS 0.094 IN, MATERIAL STEEL COATED CARBIDE, FFT: MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: RCMT 0602M0-PM5 WPP 10,  Reference No: RCMT 0602M0-PM5 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.315 IN, THICKNESS 0.125 IN, MATERIAL STEEL COATED CARBIDE, FFT: MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: RCMT 0803M0-PM5 WPP 10,  Reference No: RCMT 0803M0-PM5 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    25INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.394 IN, THICKNESS 0.156 IN, MATERIAL STEEL COATED CARBIDE, FFT: MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: RCMT 10T3M0-PM5 WPP 10,  Reference No: RCMT 10T3M0-PM5 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    25INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.630 IN, THICKNESS 0.219 IN, MATERIAL CAST IRON COATED CARBIDE, FFT: MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: RCMT 1605M0-PM5 WAK 10,  Reference No: RCMT 1605M0-PM5 RDS WAK 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.787 IN, THICKNESS 0.250 IN, MATERIAL STEEL COATED CARBIDE, FFT: MACHINING METHOD: ROUGHING, Mnfr: WALTER Mnfr Part No: RCMX 200600-PR5 WPP 10,  Reference No: RCMX 200600-PR5 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE ROUND, SIZE OD 0.984 IN, THICKNESS 0.313 IN, MATERIAL STEEL COATED CARBIDE, FFT: MACHINING METHOD: ROUGHING, Mnfr: WALTER Mnfr Part No: RCMX 250700-PR5 WPP 10,  Reference No: RCMX 250700-PR5  RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE SQUARE, SIZE WD 0.625 X LG 0.625 IN, THICKNESS 0.250 IN, MATERIAL STEEL COATED CARBIDE, RADIUS 0.031 IN, FFT: ANGLE 90 DEG; MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: SNMG 150608-NM6 WPP 10,  Reference No: SNMG 150608-NM6 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE TRIANGULAR, SIZE WD 0.375 X LG 0.650 IN, THICKNESS 0.187 IN, MATERIAL STEEL COATED CARBIDE, RADIUS 0.047 IN, FFT: ANGLE 60 DEG; MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: TNMG 160412-NM9 WPP 10,  Reference No: TNMG 160412-NM9 RDS WPP 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TURNING, SHAPE TRIANGULAR, SIZE WD 0.500 X LG 0.866 IN, THICKNESS 0.187 IN, MATERIAL CAST IRON COATED CARBIDE, RADIUS 0.047 IN, FFT: ANGLE 60 DEG; MACHINING METHOD: MEDIUM, Mnfr: WALTER Mnfr Part No: TNMG 220412-NM5 WAK 10,  Reference No: TNMG 220412-NM5 RDS WAK 10,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE TWO EDGED GROOVING , SIZE WD 3 X LG 16 MM, THICKNESS 3.9 MM, MATERIAL CAST IRON COATED CARBIDE, RADIUS 0.3 MM, Mnfr: WALTER Mnfr Part No: GX16-2E300N030-UA4 WAK 20,  Reference No: GX16-2E300N030-UA4 RDS WAK 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TWO EDGED GROOVING, SIZE WD 3.0 X LG 9 MM, THICKNESS 3.9 MM, MATERIAL STEEL COATED CARBIDE, RADIUS 0.3 MM, , MNFR: WALTER MNFR PART NO: GX16-2E300N030-UA4 WAK 20,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    35INSERT, CUTTING TOOL: TYPE TWO EDGED GROOVING, SIZE WD 5 X LG 24 MM, THICKNESS 3.9 MM, MATERIAL STEEL COATED CARBIDE, RADIUS 0.4 MM, Mnfr: WALTER Mnfr Part No: GX24-3E500N040-UF4 WPP 23,  Reference No: GX24-3E500N040-UF4 RDS WAP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE TWO EDGED GROOVING, SIZE WD 6 X LG 24 MM, THICKNESS 3.9 MM, MATERIAL CI COATED CARBIDE, RADIUS 0.5 MM, Mnfr: WALTER Mnfr Part No: GX24-4E600N050-UA4 WAK 20,  Reference No: GX24-4E600N050-UA4 RDS WAK 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, CUTTING TOOL: TYPE TWO EDGED GROOVING, SIZE WD 6 X LG 24 MM, THICKNESS 3.9 MM, MATERIAL SS COATED CARBIDE, RADIUS 0.5 MM, Mnfr: WALTER Mnfr Part No: GX24-4E600N050-UD6 WAM20,  Reference No: GX24-4E600N050-UD6 RDS WAM 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL TURNING, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, , MNFR: WALTER MNFR PART NO: NTS ER-16 040 W WXP 20,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, , MNFR: WALTER MNFR PART NO: NTS ER-16 014 W WXP 20,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, , MNFR: WALTER MNFR PART NO: NTS ER-16 024 W WXP 20,  TEST CERTIFICATE COMMENTS: MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, FFT: ANGLE 60 DEG, Mnfr: WALTER Mnfr Part No: NTS EL-16 0.75 ISO WXP 20,  Reference No: NTS EL-16 0.75 ISO RDS WXP 20,   MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 0.50 ISO WXP 20,  Reference No: NTS EL-16 0.50 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 010 UN  WXP 20,  Reference No: NTS EL-16 010 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 012 UN WXP 20,  Reference No: NTS EL-16 012 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 016 UN WXP 20,  Reference No: NTS EL-16 016 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 032 UN WXP 20,  Reference No: NTS EL-16 032 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 044 UN WXP 20,  Reference No: NTS EL-16 044 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 1.25 ISO WXP 20,  Reference No: NTS EL-16 1.25 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 1.75 ISO WXP 20,  Reference No: NTS EL-16 1.75 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 2.00 ISO WXP 20,  Reference No: NTS EL-16 2.00 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS EL-16 3.00 ISO WXP 20,  Reference No: NTS EL-16 3.00 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 012 UN WXP 20,  Reference No: NTS ER-16 012 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 016 UN WXP 20,  Reference No: NTS ER-16 016 UN RDS WXP 20,   MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 020 UN WXP 20,  Reference No: NTS ER-16 020 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 020 W WXP 20,  Reference No: NTS ER-16 020 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 032 UN WXP 20,  Reference No: NTS ER-16 032 UN RDS WXP 20,   MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 1.50 ISO WXP 20,  Reference No: NTS ER-16 1.50 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 1.75 ISO WXP 20,  Reference No: NTS ER-16 1.75 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-16 3.00 ISO WXP 20,  Reference No: NTS ER-16 3.00 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, OEM: WALTER OEM Part No: NTS ER-16 2.50 ISO WXP 20,  Reference No: NTS ER-16 2.50 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE EXTERNAL, LENGTH 22 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS ER-22 006 UN WXP 20,  Reference No: NTS ER-22 006 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 0.75 ISO WXP 20,  Reference No: NTS IR-16 0.75 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IL-16 0.75 ISO WXP 20,  Reference No: NTS IL-16 0.75 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IL-16 1.00 ISO WXP 20,  Reference No: NTS IL-16 1.00 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IL-16 2.50 ISO WXP 20,  Reference No: NTS IL-16 2.50 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IL-16 3.00 ISO WXP 20,  Reference No: NTS IL-16 3.00 ISO RDS WXP 20,   MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 010 UN WXP 20,  Reference No: NTS IR-16 010 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 010 W WXP 20,  Reference No: NTS IR-16 010 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 014 W WXP 20,  Reference No: NTS IR-16 014 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 016 UN WXP 20,  Reference No: NTS IR-16 016 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 020 UN WXP 20,  Reference No: NTS IR-16 020 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 020 W WXP 20,  Reference No: NTS IR-16 020 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 024 W WXP 20,  Reference No: NTS IR-16 024 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 032 UN WXP 20,  Reference No: NTS IR-16 032 UN RDS WXP 20,   MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 040 W WXP 20,  Reference No: NTS IR-16 040 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 1.00 ISO WXP 20,  Reference No: NTS IR-16 1.00 ISO RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 16 MM, MATERIAL STEEL COATED CATBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-16 044 UN  WXP 20,  Reference No: NTS IR-16 044 UN RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    34INSERT, THREADING: TYPE INTERNAL, LENGTH 22 MM, MATERIAL STEEL COATED CARBIDE, Mnfr: WALTER Mnfr Part No: NTS IR-22 006 UN WXP 20,  Reference No: NTS ER-16 010 W RDS WXP 20,  MTC REQUIRED ALONG WITH MATERIALWALTER
    24JACKET: TYPE PROTECTIVE FIRE, SIZE 48-50 C, MATERIAL ARAMID NOMEX, COLOR YELLOW, STANDARD EN 469:2005, FFT: TURNOUT BREGA BUNKER GEAR; COLOR: YELLOW; LENGTH: 92 CM; WATER AND WIND PROOF; BREATHABLE, WIDE SHOULDER SEAM, HIGHLY HEAT RESISTANT, STABLE ZIP WITH COVER FLAPS, SEWN ON 50 MM WIDE, SILVER REFLECTING STRIPS, BREAST POCKET FOR RADIO OR PERSONAL MONITOR AND TWO SIDE HIP POCKETS WITH FLAPS. ANTENNA MOUNTS ON THE RIGHT BREAST POCKECT; FLAME PROTECTION COALS; ON THE BACKSIDE TO WEAR UP TO THE HELMET BOTTOM, AT THE FRONT CLOSURE WITH VELCRO FASTENING; NOMEX KNITWEAR WRISTLET: EXTEND OVER THE HANDS AND ARE EQUIPPED WITH THUMB HOLES; 15 X 3 CM FLEECE STRIP ABOVE THE RADIO POCKET FOR A NAME STRIP. 45 X 10 CM FLEECE STRIP ON THE BACK FOR INDIVIDUAL LETTERING; 5 CM WIDE REFLECTING YELLOW STRIP AT THE END  OF THE JACKET'S BACK SIDE AND AROUND THE END OF THE SLEEVES., Mnfr: ROSENBAUER Mnfr Part No: 114-166226-48-50 C,  Reference No: 0050 84 ,  MTC REQUIREDROSENBAUER
    46JUMPER: TYPE CROSS CONNECTION BAR, SIZE WD 12 MM, FFT: CURRENT: 101A; STYLE: SCREW IN; POLE: 2; USED WITH TERMINAL BLOCK (WDU 16), Mnfr: WEIDMULLER. Mnfr Part No: 1053260000, Suppl: EGS ELECTRICAL GROUP Suppl P/N: UNKWEIDMULLER
    31JUMPER: TYPE CROSS CONNECTION BAR, SIZE WD 8 MM, FFT: CURRENT: 57A; STYLE: SCREW IN; POLE: 2; USED WITH TERMINAL BLOCK (WDU 6), Mnfr: WEIDMULLER. Mnfr Part No: 1054760000, Suppl: EGS ELECTRICAL GROUP Suppl P/N: UNKWEIDMULLER
    50KIT, SEAL: APPLICATION RADAR LEVEL TRANSMITTER, FFT: CONSISTS OF: (2) GASKETS; (2) O-RING (ID 17.0 x WD 2.0MM, MATERIAL: EPDM); (1) O-RING (ID 49.21 x WD 3.53MM, MATERIAL: EPDM); (2) O-RING: (ID 17.12 x WD 2.62MM, MATERIAL: FKM); (1) O-RING (ID 113.9 x WD 3.63MM, MATERIAL: EPDM); (1) O-RING (ID 72.0 x WD 3.0MM, MATERIAL: EPDM); FOR MODEL FMR245, Mnfr: ENDRESS+ HAUSER Mnfr Part No: 535720-9010, MANDRG: 47538649SP SHEET 01 Rev: 0 Item: 65ENDRESS & HAUSER
    18KIT, SEAL: TYPE O-RING CORD, APPLICATION SPLICING, FFT: CORD MATERIAL EPDM (ETHYLENE PROPYLENE); DUROMETER: HARD, SHORE A70; INCLUDES FIVE 7-FT. LONG PIECES OF CORD STOCK IN DIAMETERS OF 0.070, 0.103, 0.139, 0.210 AND 0.275 IN, SPLICING JIG, TUBE OF ADHESIVE, AND A RAZOR BLADE,  Suppl: MCMASTER-CARR Suppl Part No: 13105K41-
    72KIT, TERMINATION: TYPE IN-LINE SPLICE L, ELECTRICAL RATING 600V-1KV , CONDUCTOR 120-500MM/250-1000MCM AWG, FFT: BOLT LENGTH: 1-1/2 IN; CONNECTION LENGTH: 8 IN; CAP NOMINAL LENGTH: 12 IN; HEAT SHRINKABLE CAP; FOR LOW VOLTAGE MOTOR TERMINATION, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: MCK-2CRAYCHEM TYCO CORPORATION
    87KIT, TERMINATION: TYPE IN-LINE SPLICE L, ELECTRICAL RATING 600V-1KV, CONDUCTOR 10-95MM/6-4AWG, FFT: BOLT LENGTH: 1-1/4 IN; CONNECTION LENGTH: 5 IN; SLEEVE NOMINAL LENGTH: 9 IN; HEAT SHRINKABLE CAP; FOR LOW VOLTAGE MOTOR TERMINATION, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: MCK-1LRAYCHEM TYCO CORPORATION
    66KIT, TERMINATION: TYPE SPLICE, STANDARD CE; CSA; FM, FFT:TAPE; JUNCTION SIZE: 1-1/4 IN; FOR HEAT TRACING AND ACCESSORIES, MNFR: RAYCHEM TYCO CORPORATION MNFR PART NO: 447379-000, MNFR: RAYCHEM TYCO CORPORATION MNFR PART NO: T-100,  CATALOGUE NO: 15997RAYCHEM TYCO CORPORATION
    235KIT, TERMINATION: TYPE STUB SPLICE V, ELECTRICAL RATING 600V-1KV, CONDUCTOR 120-240MM/250-500MCM AWG, FFT: BOLT LENGTH: 1-1/2 IN; CONNECTION LENGTH: 5.5 IN; CAP NOMINAL LENGTH: 6.5 IN; HEAT SHRINKABLE CAP; FOR LOW VOLTAGE MOTOR TERMINATION, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: MCK-4VRAYCHEM TYCO CORPORATION
    192KIT, TERMINATION: TYPE STUB SPLICE V, ELECTRICAL RATING 600V-1KV, CONDUCTOR 4-16MM/12-4AWG, FFT: BOLT LENGTH: 3/4 IN; CONNECTION LENGTH: 2.5 IN; CAP NOMINAL LENGTH: 3.4 IN; HEAT SHRINKABLE CAP; FOR LOW VOLTAGE MOTOR TERMINATION, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: MKK-2VRAYCHEM TYCO CORPORATION
    27KIT, VALVE REPAIR: APPLICATION GATE VALVE 2IN 1500LB IN, FFT: CONSISTS OF: ONE RING JOINT GASKET (PN: 25516690-M) AND FIVE GRAPHITE PACKINGS (PN: 25516711); SIZE OF PACKING: 25.6 MM X 38.9 MM X 6.4 MM, Mnfr: TY VALVE CORPORATION Mnfr Part No: UNK, Suppl: LOCKWOOD INTERNATIONAL INC Suppl P/N: UNKTY VALVE CORPORATION
    25KIT, VALVE REPAIR: TYPE SPARE PARTS, APPLICATION BALL VALVE 3 IN, FFT: WITH LOCKING DEVICE, Mnfr: JC-TL BALL VALVE CORP. Mnfr Part No: UNK, Mnfr: ECONOSTO Mnfr Part No: JC/SK715T080, Suppl: ANGUS Suppl P/N: ZMP696JC-TL BALL VALVE CORP.
    20KIT: APPLICATION CONVEYOR, FFT: CONSTIST OF SPROCKET ON MOTOR SIDE (OD 107.2MM X ID 38MM AND KEY 12 X 8MM) , SPROCKET ON ROTOR SIDE (OD 314.2MM X ID 48MM AND KEY 12X8MM) AND CHAIN WITH CHAIN LINK ACCESSORIES, Mnfr: DONG YANG P & F Mnfr Part No: RS60 16NT / RS60 50NTDONG YANG P & F
    18KIT: TYPE ASSORTED, FFT: KIT CONSISTS OF FUSE 3.15A 250V (10), FUSE 1.6A 250V (10) AND JUMPER MINI OPEN TYPE 6MM (25),  Model/Machine No: 05-PK-85101/0005-
    35KIT: TYPE FIBER BREAKOUT, APPLICATION STRUCTURED CABLING, STANDARD IEC, FFT: CONSISTS OF 12 UNIT, Mnfr: SYSTIMAX Mnfr Part No: 760018838SYSTIMAX
    20KIT: TYPE SOLDERLESS EARTH CONNECTION GROUNDING, FFT: COMPLETE WITH TINNED COPPER EARTHING BRAID AND MECHANICAL ROLL SPRING FOR EACH PHASE; DIA OVER METAL TAPE SCREEN: 31-44 MM, Mnfr: TYCO ELECTRONICS Mnfr Part No: EAKT 1658TYCO ELECTRONICS
    141KIT: TYPE SPLICE, APPLICATION VPL CABLE, Mnfr: TYCO THERMAL CONTROLS Mnfr Part No: T-100TYCO THERMAL CONTROLS
    21LABEL: TYPE FILTER SECTION, COLOR BLACK, Mnfr: CLIMA TECH AIRCONDITIONERS GMBH Mnfr Part No: 04930151, Suppl: ZAMIL AIR CONDITIONERS Suppl P/N: 80104513CLIMA TECH AIRCONDITIONERS GMBH
    950LABEL: TYPE WARNING, DESIGNATION ELECTRIC TRACED, FFT: FOR HEAT TRACING SYSTEM; POLYESTER PLANT, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: 104.0092, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: LAB-I-01RAYCHEM TYCO CORPORATION
    17LATCH, DOOR: STYLE LEVER, FFT: FOR PELLETIZING FACILITIES; SS; KIT= U BOLT NUTS AND LATCH, Mnfr: DESTACO Mnfr Part No: 334-SS, Mnfr: KOBELCO (KOBE STEEL, LTD. ) Mnfr Part No: AE-PS02GC#03 , Mnfr: GALA INDUSTRIES INC Mnfr Part No: AE-PS02GC#03DESTACO
    24LENS, INDICATING LIGHT: COLOR RED, MATERIAL PLASTIC, FFT: ITEM SERIAL NUMBER : 13. FOR PHASE-IV SPARE PARTS. TAG NUMBER : 41 DP 126/127/128. ITEM NUMBER : H1/H2. SPIR NUMBER : 13, Mnfr: RAYCHEM TYCO CORPORATION Mnfr Part No: MA RED, DRAWING: 448601(4-5/9)/448602(4-5/9)/44 Rev: UNKRAYCHEM TYCO CORPORATION
    99LENS, SAFETY EQUIPMENT: TYPE OUTER PROTECTION, FFT: AUTO DARK ELECTRO OPTICAL FILTER PROTECTION AGAINST DIRT, SCRATCHES AND WELDING SPARKS; FOR AUTO DARK WELDING HELMET, Mnfr: KEMPER Mnfr Part No: 70874005KEMPER
    250LENS: TYPE WELDING FILTER, SIZE WD 4-1/4 X HT 2 IN, MATERIAL GLASS WITH ABS ENCLOSURE, STANDARD ANSI Z87.1-1989, FFT: SOLAR POWERED; AUTO DARKENING; SHADE NO. 10, Suppl: MCMASTER-CARR Suppl P/N: 51885T84, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    250LENS: TYPE WELDING FILTER, SIZE WD 4-1/4 X HT 2 IN, MATERIAL GLASS WITH ABS ENCLOSURE, STANDARD ANSI Z87.1-1989, FFT: SOLAR POWERED; AUTO DARKENING; SHADE NO. 9, Suppl: MCMASTER-CARR Suppl P/N: 51885T341, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE REQUIRED ALONG WITH THE MATERIAL-
    17LIGHT, INDICATING: TYPE PILOT, VOLTAGE 125 VAC/DC, WATTAGE 3 W, COLOR GREEN, STANDARD UL, FFT: DIA: 16MM, Mnfr: C3CONTROLS Mnfr Part No: MRL125DLG-MPLLGN,  Suppl: POWELL ELECTRICAL MFG CO. Suppl Part No: UNKC3CONTROLS
    22MAT: TYPE ORGANIC BOUND, SIZE WD 870 X LG 640  X THK 6.5 MM, COLOR WHITE, MATERIAL POLYCRYSTASTALLINE ALUMINA FIBER, Mnfr: JOHN ZINK COMPANY Mnfr Part No: UJZK-244 MATJOHN ZINK COMPANY
    93MEDIA: TYPE CHEMICAL FILTER SECOND PASS, FORM PELLETS, MATERIAL PURAFIL CP BLEND, STANDARD UL, Mnfr: PURAFIL INC, USA Mnfr Part No: PK18-CPB, CATALOGUE: ATTACHEMENT-F1-2 Rev: 0 Item: 0PURAFIL INC, USA
    93MEDIA: TYPE CHEMICAL FILTER SELECT-FIRST PASS, FORM PELLETS, MATERIAL BLEND PURAFIL, STANDARD UL, Mnfr: PURAFIL INC, USA Mnfr Part No: PK18-CHS, CATALOGUE: ATTACHEMENT-E1-2 Rev: 0 Item: 0PURAFIL INC, USA
    115MEDIA: TYPE PURAKOL, FORM GRANULES, Mnfr: OTAIBI CO Mnfr Part No: UNK, Mnfr: PURAFIL INC, USA Mnfr Part No: PK18PKLPURAFIL INC, USA
    26MODULE: TYPE (16) CHANNEL ANALOG INPUT TERMINATION, APPLICATION PESS SYSTEM CABINET, Mnfr: PEPPERL & FUCHS GMBH Mnfr Part No: MB-AI-TRD-3351-206644PEPPERL & FUCHS GMBH
    124MODULE: TYPE ENTRANCE PROTECTOR PANEL, POWER SOURCE 75VDC 150MA, APPLICATION STRUCTURED CABLING, STANDARD UL, FFT: WITH BREAKEROVER VOLTAGE: 75VDC; 2-5NS RESPONSE (IEC); WITH 5 PIN SOLID STATE, Mnfr: CIRCA TELECOM USA INC. Mnfr Part No: 750024, Mnfr: PROTECTOR SAFETY LTD. Mnfr Part No: 4B3S-75PROTECTOR SAFETY LTD.
    68NAIL: LENGTH 3 IN, DIAMETER 2 IN, MATERIAL SS DIN WN 1.4303, STANDARD ISO 8746, FFT: FOR LABEL, Mnfr: INVENSYS BROOK CROMPTON Mnfr Part No: EW 504 516 154, Mnfr: FOXBORO-ECKARDT Mnfr Part No: UNKFOXBORO ECKARDT
    37NIPPLE, PIPE HEX: SIZE 1/2 IN, LENGTH 1.89 IN, CONNECTION NPT, MATERIAL STEEL ZINC PLATED, RATING 7000 PSI, HEX SIZE 7/8 IN, ,  SUPPL: MAC MASTER SUPPL PART NO: 5232T334,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    37NIPPLE, PIPE HEX: SIZE 3/4 IN, LENGTH 1.96 IN, CONNECTION FNPT, MATERIAL STEEL ZINC PLATED, RATING 5500 PSI, HEX SIZE 1-1/8 IN, ,  SUPPL: MAC MASTER SUPPL PART NO: 50925K149,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    97NIPPLE, PIPE: SIZE 3/8 IN, LENGTH 3.25 IN, CONNECTION TBE, MATERIAL SS 316, RATING SCH 80, INSPECTION REQUIREMENT: MATERIAL CERTIFICATE WITH SUPPLY OF MATERIAL-
    20NIPPLE, PIPE: TYPE EFW, SIZE 3/8 IN, LENGTH 100 MM, CONNECTION THD X SW, MATERIAL SS 304, RATING SCH 40, ,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19NIPPLE, PIPE: TYPE SMLS, SIZE 1/2 IN, LENGTH 3 IN, CONNECTION BOE X POE, MATERIAL SS ASTM A312, RATING SCH 40S, GRADE TP316,  MATERIAL CERTIFICATE REQUIRED ALONG WITH THE ITEM-
    18NOZZLE: TYPE VENTURI, MATERIAL PLASTIC, APPLICATION FILTER, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 6520624COPERION WAESCHLE GMBH & CO KG
    18NUT, HEX: DIAMETER 1 IN, THREADS 8 UNC, HEIGHT 1 IN, MATERIAL AS ASTM A194, GRADE 2H, Mnfr: TUTHILL CORPORATION, USA Mnfr Part No: 1S304-10, DRAWING: 6R8826-20 Rev: 0, For Tag/Equip No: 41-TS-132TUTHILL CORPORATION, USA
    28NUT, HEX: DIAMETER 1 IN, THREADS UNC 8 TPI, MATERIAL AS ASTM A194, GRADE 8, FFT: HEAVY, Mnfr: F.B.M. MILANO, ITALY Mnfr Part No: M922BTQJF.B.M. MILANO, ITALY
    24NUT, HEX: DIAMETER 1/2 IN, THREADS 13 UNC TPI, MATERIAL AS ASTM A194, STANDARD ASME B1.1, GRADE 2H, FFT: WITH PTFE COATED; FOR TOP COVER, Mnfr: ENVIROTECH Mnfr Part No: FS-4TC-X-HHNTENVIROTECH
    994NUT, HEX: DIAMETER 1/2 IN, THREADS UNC 13-2B TPI, MATERIAL AS ASTM A194, GRADE 2H, FFT: FOR DRUMS; SN: 96/1052/01, 96/1053/01, 96/10555/01; EQUIP: 12-D-003, 12-D-005, 16-D-005, Mnfr: FBM HUDSON ITALIANA Mnfr Part No: UNKNOWN, DRAWING: 2226.01000 SH. 1/ 22 Rev: UNK Item: POS 143/126/24F.B.M HUDSON ITALIANA S.P.A.
    59NUT, HEX: DIAMETER 10 MM, HEIGHT 10 MM, MATERIAL SS 316, GRADE 8M, Mnfr: PENBERTHY Mnfr Part No: 80995-922, Mnfr: TYCO FLOW CONTROL Mnfr Part No: UNKPENBERTHY
    38NUT, HEX: DIAMETER 1-1/2 IN, THREADS 8 UN, MATERIAL ASTM A194, STANDARD ANSI B1.1, GRADE 2H, FFT: HEIGHT 36.4 - 38.2 MM; CONSIST OF 2 NUTS, Suppl: FACET ITALIANA S.P.A. Suppl P/N: 47003800, DRAWING: 10-G-110-RQ-12-002 Rev: 0 Item: 28-
    39NUT, HEX: DIAMETER 1-1/8 IN, THREADS UNC 7 TPI, MATERIAL AS ASTM A194, STANDARD ASME B1.1, GRADE 2H, Mnfr: KOREA BOLT CO. LTD. Mnfr Part No: UNK, Suppl: DAESUNG GROUP Suppl P/N: UNKKOREA BOLT CO. LTD.
    17NUT, HEX: DIAMETER 16 MM, THREADS 2 MM, MATERIAL CS ASTM A194, GRADE 2H, FFT: METRIC, Mnfr: JE-II FASTENER Mnfr Part No: FN-GN-002-16, Suppl: SEWON Q&TECH CO. LTD. Suppl P/N: UNKJE-II FASTENER
    42NUT, HEX: DIAMETER 3/4 IN, THREADS 8 UNC, HEIGHT 19 MM, MATERIAL AS ASTM A194, GRADE 2H, Mnfr: KLOPPER-THERM GmbH & CO. KGKLOPPER-THERM GMBH & CO. KG
    67NUT, HEX: DIAMETER 3/4 IN, THREADS UNC 10 TPI, MATERIAL CS ASTM A194, STANDARD ANSI B1.1, GRADE 2H, INSPECTION REQUIREMENT: Material Test Certificate is required to be supplied with the Material-
    164NUT, HEX: DIAMETER 3/8 IN, THREADS UNC 16 TPI, MATERIAL SS, GRADE 316L, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE ITEMUNKNOWN
    628NUT, HEX: DIAMETER 3/8 IN, THREADS UNC, HEIGHT 7.6 MM, MATERIAL SS 304, Suppl: SULZER CHEMTECH AG Suppl P/N: 106.216.980.062, DRAWING: 106.224.724, 725 Rev: 0 Item: 007, 106.228.721, 106.229.385 Rev: 0 Item: 003, 106.228.722, 726, 728, 730 Rev: 0 Item: 006, 106.228.723, 727, 729, 731 Rev: 0 Item: 008, 106.228.732, 106.231.224 Rev: 0 Item: 013-
    51NUT, HEX: DIAMETER 5/8 IN, THREADS UNC 11 TPI, MATERIAL AS ASTM A194, GRADE 2H (ZINC PLATED), FFT: FOR RECYCLE GAS COMPRESSOR, OEM: API BASCO OEM Part No: 4026-37-0119-00, Mnfr: ELLIOTT-EBARA Mnfr Part No: UNK, Mnfr Drg 1452-12-180-000 Rev: 1 Item No: 13, Mnfr Drg BR06T0230-01-971 Rev: 0,  Equip Model No: 250TC,  Serial No: R06T023002API BASCO
    46NUT, HEX: DIAMETER 7/8 IN, THREADS 9 UNC TPI, MATERIAL SS ASTM A194, STANDARD ASME B1.1, GRADE 8, FFT: HEAVY HEX, Mnfr: AL MUHAIDIB TECHNICAL SUPPLIES. Mnfr Part No: UNK, Suppl: ARABIAN CBI LTD Suppl P/N: UNKAL MUHAIDIB TECHNICAL SUPPLIES.
    160NUT, HEX: DIAMETER M10, THREADS 1.5 MM, MATERIAL DUPLEX SS, GRADE 304, Mnfr: KOCH-GLITSCH Mnfr Part No: 891-205F03KOCH-GLITSCH
    401NUT, HEX: DIAMETER M10, THREADS 1.5 MM, MATERIAL SS, GRADE 304-
    18NUT, HEX: DIAMETER M12, THREADS 1.75 MM, HEIGHT 11 MM, MATERIAL AS ASTM A194, GRADE 2HDOSSARY HARDWARE & GEN STORES
    49NUT, HEX: DIAMETER M16, THREADS 2 MM, MATERIAL STEEL ZINC PLATED, STANDARD DIN 934 CL 8-
    19NUT, HEX: DIAMETER M20, THREADS 2 MM, HEIGHT 20 MM, MATERIAL AS ASTM A194, GRADE 2HDOSSARY HARDWARE & GEN STORES
    30NUT, HEX: DIAMETER M20, THREADS 2.5 MM, MATERIAL SS DIN WN 1.7218, STANDARD DIN 2510, FFT: NF, Mnfr: UHDE HIGH PRESSURE TECHNOLOGIES GMBH Mnfr Part No: 80-038918UHDE HIGH PRESSURE TECHNOLOGIES GMBH
    1227NUT, HEX: DIAMETER M24, THREADS 3 MM, HEIGHT 25.5 MM, MATERIAL AS ASTM A194, STANDARD DIN 2510, GRADE 2H, Mnfr: JUNGEBLODT GMBH & CO. KG Mnfr Part No: SM024001/176JUNGEBLODT GMBH & CO. KG
    39NUT, HEX: DIAMETER M27, THREADS 3 MM, HEIGHT 27 MM, MATERIAL AS ASTM A194, STANDARD DIN 2510, GRADE 2H, Mnfr: JUNGEBLODT GMBH & CO. KG Mnfr Part No: SM027001/628JUNGEBLODT GMBH & CO. KG
    42NUT, HEX: DIAMETER M30, MATERIAL 1.7258, STANDARD DIN 934,  mtc-
    67NUT, HEX: DIAMETER M56, Mnfr: KOBELCO (KOBE STEEL, LTD. ) Mnfr Part No: BNLG-BA-M056KOBELCO (KOBE STEEL, LTD. )
    20NUT, HEX: FFT: FOR CYLINDER COVER, 1ST STAGE OF COMPRESSOR, Mnfr: BURCKHARDT COMPRESSION Mnfr Part No: 122.000.007.512, Mnfr Drg 126 000 705 Rev: 1 Item No: C01215,  Equip Serial No: 101051,  Equip Model No: 4D375B-3B_1BURCKHARDT COMPRESSION
    19NUT, HEX: FFT: FOR TEMPERATURE TRANSMITTER, Mnfr: YOKOGAWA MIDDLE EAST EC Mnfr Part No: Y9601BUYOKOGAWA  MIDDLE EAST EC
    27NUT, HEX: HEIGHT 22 MM, FFT: FOR STEERING AXLE GRP; KOMATSU F/LIFT FD40-5; FIG.INDEX NO.3301-20 OF THE PARTS BOOK, Mnfr: KOMATSU FORKLIFT CO. LTD. Mnfr Part No: 34B-21-14151KOMATSU FORKLIFT CO. LTD.
    17NUT, HEX: MATERIAL SS, FFT: CAM; NOZZLE PATTERN SLEEVE; 1000 GPM, OEM: AKRON BRASS CO. USA OEM Part No: 735061, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 4,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    28NUT, HEX: MATERIAL STEEL, GRADE 4, FFT: FOR PUMP, Mnfr: FLOWSERVE PUMPS LTD Mnfr Part No: 640219FLOWSERVE PUMPS LTD
    71NUT, HEXAGON: DIAMETER 1-1/2 IN, MATERIAL AS ASTM A194, GRADE 2H, THREADS UN 8-2B TPI, FFT:TYPE: HEAVY; SPARE PARTS FOR ABSORBER VESSELS-
    99NUT, HEXAGON: DIAMETER 3/8 IN, MATERIAL SS, GRADE 316, THREADS 16 UNC, FFT:FOR CLOTH TO TRAY, MNFR: SIEMENS WATER TECHNOLOGIES MNFR PART NO: 10088803,  EQUIP MODEL NO: 45A,  EQUIP SERIAL NO: CHI1103SIEMENS WATER TECHNOLOGIES
    27NUT, HEXAGON: DIAMETER 4 IN, THREADS BSA-4L-
    63NUT, HEXAGON: DIAMETER M33, MATERIAL AS ASTM A194, GRADE 2H, THREADS 3 MM-
    140NUT, HEXAGON: DIAMETER M39, MATERIAL AS ASTM A194, HEIGHT 39 MM, GRADE 2H, THREADS 3 MM, , MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  CATALOGUE NO: 11327DOSSARY HARDWARE & GEN STORES
    295NUT, LOCK: DIAMETER M12, THREADS 1.75 MM, LOCKING METHOD WASHER, MATERIAL GS, , MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNKDOSSARY HARDWARE & GEN STORES
    99NUT, LOCK: DIAMETER M12, THREADS 1.75 MM, LOCKING METHOD WASHER, MATERIAL STEEL/ZINC PLATED, , MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNKDOSSARY HARDWARE & GEN STORES
    42NUT, LOCK: DIAMETER M30, MATERIAL 1.7258, STANDARD DIN 439,  MTC-
    47NUT, LOCK: OEM: MOLLERS. OEM Part No: 107918, MANDRG: METAL DETECTOR Rev: 0 Item: 21, Equip/Tag Model No: METAL DETECTOR Mnfr: UNKNOWN, Equip/Tag Serial No: 18.090 Mnfr: UNKNOWNMOLLERS.
    95NUT, LOCK: OEM: MOLLERS. OEM Part No: 107919, MANDRG: METAL DETECTOR Rev: 0 Item: 20, Equip/Tag Model No: metal detector Mnfr: UNKNOWN, Equip/Tag Serial No: 18.090 Mnfr: UNKNOWNMOLLERS.
    76NUT, LOCK: TYPE GLAND CABLE, DIAMETER M25, THREADS 1.5 MM, LOCKING METHOD WHITE NYLON INSERT AND WASHER, MATERIAL BRASS, FFT: SEAL THK: 2MM, Mnfr: CMP PRODUCTS Mnfr Part No: 25LN + 25ETS2, Suppl: EGS ELECTRICAL GROUP Suppl P/N: UNKCMP PRODUCTS
    25NUT: DIAMETER 1-1/4 IN, THREADS UNC 8 TPI, FFT: FOR STEAM TURBINE BFW VHP PUMP, Mnfr: ELLIOTT TURBOMACHINERY LTD Mnfr Part No: P12S11, Mnfr Drg 1015144 Rev: 3 Item No: 15ELLIOTT TURBOMACHINERY LTD
    71NUT: FFT: FOR 3RD STAGE BOOSTER CYLINDER 4, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: FFF530300450NUOVO PIGNONE S.P.A, ITALY
    197NUT: TYPE FERRULE, DIAMETER OD 10 MM, MATERIAL BRASS ASTM B16 ALLOY 360, FFT: CONSISTS OF: (1) NUT, (1) BACK FERRULE, (1) FRONT FERRULE AND (1) FERRULE PLASTIC BAR, Mnfr: HY-LOK CORP. Mnfr Part No: CNFS-10M-BRASSHY-LOK CORP.
    197NUT: TYPE FERRULE, DIAMETER OD 12 MM, MATERIAL BRASS ASTM B16 ALLOY 360, FFT: CONSISTS OF (1) NUT, (1) BACK FERRULE, (1) FRONT FERRULE AND (1) FERRULE PLASTIC BAR, Mnfr: HY-LOK CORP. Mnfr Part No: CNFS-12M-BRASSHY-LOK CORP.
    194NUT: TYPE FERRULE, DIAMETER OD 6 MM, MATERIAL BRASS ASTM B16 ALLOY 360, FFT: CONSISTS OF (1) NUT, (1) BACK FERRULE, (1) FRONT FERRULE AND (1) FERRULE PLASTIC BAR, Mnfr: HY-LOK CORP. Mnfr Part No: CNFS-6M-BRASSHY-LOK CORP.
    25NUT: TYPE FITTING, MATERIAL SS, FFT: T 1/16 IN, VALCO, (ZN1) LDV, FOR MAXUM GC, Mnfr: SIEMENS LIMITED Mnfr Part No: 1291509-003, Suppl: ISA MANNAI TECHNICAL SERVICES EST. Suppl P/N: 1291509-003SIEMENS LIMITED
    17NUT: TYPE FLANGLESS / SHORT, DIAMETER 1/8 IN, MATERIAL PEEK, FFT: FOR TOC ANALYZER, Mnfr: TECMA Mnfr Part No: UNK, Mnfr: TELEDYNE TEKMAR DOHRMANN Mnfr Part No: 14-8659-016TELEDYNE TEKMAR DOHRMANN
    33NUT: TYPE STEERING AXLE, DIAMETER 12 MM, FFT: MATERIAL AS PER JIS STANDARD, Mnfr: KOMATSU FORKLIFT CO. LTD. Mnfr Part No: 300-22-31241KOMATSU FORKLIFT CO. LTD.
    19O RING: INSIDE DIAMETER 124.4 MM, WIDTH 3.1 MM, MATERIAL RUBBER, APPLICATION COLUMN PIPE, FFT:, MNFR DRG R073326606-105 REV: 0 ITEM NO: 115-6,  CATALOGUE NO: 11000-
    19OPERATOR: TYPE BRANCH, FFT: ASSEMBLY; FOR CIRCUIT BREAKER, Mnfr: COOPER CROUSE HINDS Mnfr Part No: EPL-K1COOPER CROUSE HINDS
    25ORIFICE: MATERIAL METAL, FFT: FOR M F R TESTER MODEL: TP-404; SHARQ PQA: C035-01, Mnfr: TESTER SANGYO CO LTD, JAPAN Mnfr Part No: X-411-04TESTER SANGYO CO LTD, JAPAN
    18O-RING SET: APPLICATION RESILIENT GATE VALVE, QUANTITY 5, Mnfr: FIVALCO Mnfr Part No: ZMP694FIVALCO
    19O-RING SET: TYPE INLET/OUTLET, APPLICATION PNEUMATIC DRIVEN PUMP(TAPFLOW), QUANTITY 4, FFT: MATERIAL: FEP, Mnfr: KOREA FLUID CO. Mnfr Part No: 6-072-18-17KOREA FLUID CO.
    80O-RING, CORD: MATERIAL FKM, SHORE HARDNESS 75A, FFT: CROSS SECTIONAL SHAPE: ROUND DUROMETER: HARD; NOMINAL WIDTH 8.5 MM; ACTUAL WIDTH 0.335 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH 100 FT., Suppl: MCMASTER-CARR Suppl P/N: 94245k57-
    99O-RING, CORD: MATERIAL FKM, SHORE HARDNESS 75A, FFT: CROSS SECTIONAL SHAPE: ROUND; DUROMETER: HARD; NOMINAL WIDTH 5.7 MM; ACTUAL WIDTH 0.224 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH 100 FT., Suppl: MCMASTER-CARR Suppl P/N: 94245k55-
    75O-RING, CORD: MATERIAL VITON FLUOROELASTOME, SHORE HARDNESS 75A, FFT: CROSS SECTIONAL SHAPE: ROUND; DUROMETER: HARD; NOMINAL WD 4 MM; ACTUAL WIDTH 0.157 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH: 100 FT, Suppl: MCMASTER-CARR Suppl P/N: 94245K54-
    75O-RING, CORD: MATERIAL VITON FLUOROELASTOMER, SHORE HARDNESS 75 A, FFT: CROSS SECTIONAL SHAPE: ROUND; DUROMETER: HARD; NOMINAL WIDTH 2.4 MM; ACTUAL WIDTH 0.093 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH: 100 FT, Suppl: MCMASTER-CARR Suppl P/N: 94245K52-
    75O-RING, CORD: MATERIAL VITON FLUOROELASTOMER, SHORE HARDNESS 75A, FFT: CROSS SECTIONAL SHAPE: ROUND; DUROMETER: HARD; NOMINAL WIDTH 3 MM; ACTUAL WIDTH 0.118 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH: 100 FT, Suppl: MCMASTER-CARR Suppl P/N: 94245K53-
    99O-RING, CORD: MATERIAL VITON FLUOROELASTOMER, SHORE HARDNESS 75A, FFT: CROSS SECTIONAL SHAPE: ROUND; DUROMETER: HARD; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; NOMINAL WIDTH 5 MM; ACTUAL WIDTH 0.197 IN; LENGTH 100 FT, Suppl: MCMASTER-CARR Suppl P/N: 94245K56-
    75O-RING, CORD: THICKNESS 0.063 IN, MATERIAL FKM VITON, SHORE HARDNESS 75A, STANDARD AMS 3216G, FFT: NOMINALCROSS SECTION SHAPE: ROUND; DUROMETER: HARD; WIDTH 1.6 MM ACTUAL WIDTH 0.063 IN; TEMP RANGE: 0 DEG F TO +392 DEG F; COLOR: BLACK; LENGTH: 100 FT, Suppl: MCMASTER-CARR Suppl P/N: 94245K51-
    19O-RING, CORD: THICKNESS 1 MM, MATERIAL VITON, FFT: STOCK; TO ASTM D2000-2HK; 100 FT ROLLS-
    20O-RING, CORD: THICKNESS 18 MM, MATERIAL NEOPRENE RUBBER, FFT: LENGTH:373 M-
    18O-RING, CORD: THICKNESS 2 MM, MATERIAL RUBBER, FFT: OLD MATERIAL NO: 02-04-00289, OLD PART NO: N7-C-02.00MM; LENGTH:5M, OEM: UNKNOWN OEM Part No: N7-C-02.00MMUNKNOWN
    18O-RING, CORD: THICKNESS 2.5 MM, MATERIAL RUBBER, FFT: OLD MATERIAL NO: 02-04-00290, OLD PART NO: N7-C-02.50MM; LENGTH:5M, OEM: UNKNOWN OEM Part No: N7-C-02.50MMUNKNOWN
    18O-RING, CORD: THICKNESS 3 MM, MATERIAL RUBBER, FFT: OLD MATERIAL NO: 02-04-00291, OLD PART NO: N7-C-3.00MM; LENGTH:5M, OEM: UNKNOWN OEM Part No: N7-C-3.00MMUNKNOWN
    18O-RING, CORD: THICKNESS 4 MM, MATERIAL RUBBER, FFT: OLD MATERIAL NO: 02-04-00293, OLD PART NO: N7-C-04.00MM; LENGTH:5M, OEM: UNKNOWN OEM Part No: N7-C-04.00MMUNKNOWN
    18O-RING, CORD: THICKNESS 4.5 MM, MATERIAL RUBBER, FFT: OLD MATERIAL NO: 02-04-00294, OLD PART NO: N7-C-04.50MM; LENGTH:5M, OEM: UNKNOWN OEM Part No: N7-C-04.50MMUNKNOWN
    37O-RING: APPLICATION ADIABATIC BOMB CALORIMETER, FFT: TYPE: UPPER, Mnfr: IKA-WERKE GMBH & CO. KG Mnfr Part No: 1583600IKA-WERKE GMBH & CO. KG
    23O-RING: APPLICATION GATE VALVE STEM, FFT: FOR USE ON LDPE; VALVE SIZE: 10 IN., Mnfr: KENNEDY VALVE COMPANY Mnfr Part No: R-6,  Model/Machine No: 4701-10""KENNEDY VALVE COMPANY
    17O-RING: APPLICATION TITRATOR HEAD, Mnfr: METTLER TOLEDO INTERNATIONAL INC Mnfr Part No: 51190366,  Equip Model No: V20/V30 Mnfr: KARL FISCHERMETTLER TOLEDO INTERNATIONAL INC
    17O-RING: INSIDE DIAMETER 130 MM, WIDTH 5 MM, MATERIAL VITON A, APPLICATION PEROXIDE DOSING PUMP, Mnfr: UHDE HIGH PRESSURE TECHNOLOGIES GMBH Mnfr Part No: 08-991130UHDE HIGH PRESSURE TECHNOLOGIES GMBH
    34O-RING: INSIDE DIAMETER 192.9 MM, WIDTH 3.1 MM, MATERIAL RUBBER, APPLICATION INTERMEDIATE CASING-
    25O-RING: INSIDE DIAMETER 234.5 MM, WIDTH 8.4 MM, MATERIAL NBR, STANDARD JIS-B2401, Mnfr: KOBELCO (KOBE STEEL, LTD. ) Mnfr Part No: BGRD-OP-0235, DRAWING: LM-F4011 Rev: UNK Item: 59KOBELCO (KOBE STEEL, LTD. )
    38O-RING: INSIDE DIAMETER 254 MM, WIDTH 3 MM, MATERIAL NBR, STANDARD DIN 3770, APPLICATION ROTARY VALVE, Suppl: COPERION WAESCHLE GMBH & CO KG Suppl P/N: 013304, MANDRG: ET - M 31282 / KAP. 11/ 4V16 Rev: 0 Item: 1.30, Tag/Equip No: RF-4103, RF-4108, RF-4254, RF-4259, RF-4203, RF-4130, RF-4154, RF-4160, RF-4210, RF-4359, RF-4353, RF-4330, RF-4310, RF-4308, RF-4303, RF-4260, RF-4253, RF-4230, RF-4208, RF-4159, RF-4153, RF-4110, RF-4354, RF-4360, Equip/Tag Model No: ZRD 250.1-9,5-AC, Equip/Tag Serial No: 122187, 122264, 122190, 122282, 122281, 122279, 122278, 122277, 122275, 122274, 122266, 122265, 122293, 122286, 122285, 122284, 122283, 122192, 122267, 122189, 122191, 122188, 122280, 122294-
    18O-RING: INSIDE DIAMETER 2-7/8 IN, WIDTH 1/4 IN, MATERIAL BUNA- N, SHORE HARDNESS 70, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, FFT: THROAT SLEEVE; 2-233, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 757065, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 13,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    48O-RING: INSIDE DIAMETER 2-9/16 IN, WIDTH 3/16 IN, MATERIAL N674, SHORE HARDNESS 70, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 717043, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 15,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    20O-RING: INSIDE DIAMETER 3-1/2 IN, WIDTH 3/32 IN, MATERIAL BUNA-N, SHORE HARDNESS 70, APPLICATION CCTV CAMERAS, Mnfr: J.M. CANTY INC Mnfr Part No: S2-153-1, Model/Machine No: 2-153 Mnfr: PARKERJ.M. CANTY INC
    18O-RING: INSIDE DIAMETER 3-1/4 IN, WIDTH 3/16 IN, MATERIAL BUNA-N, SHORE HARDNESS 70, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, FFT: THROAT SLEEVE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 757149, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 26,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    18O-RING: INSIDE DIAMETER 3-1/8 IN, WIDTH 1/4 IN, MATERIAL BUNA-N, SHORE HARDNESS 70, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, FFT: THROAT SLEEVE; 2-235, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 757046, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 14,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    26O-RING: INSIDE DIAMETER 365 MM, WIDTH 5.33 MM, MATERIAL RUBBER, APPLICATION INTERMEDIATE CASING-
    18O-RING: INSIDE DIAMETER 4 IN, WIDTH 1/4 IN, SHORE HARDNESS N-818-70, APPLICATION 3-WAY HYDRANT MONITOR NOZZLE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 757251, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 12,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTD,  Reference No: 2-242 Mnfr: PARKERAKRON BRASS CO. USA
    44O-RING: INSIDE DIAMETER 450 MM, WIDTH 6 MM, MATERIAL FKM/FDA WHITE, SHORE HARDNESS 70, APPLICATION DIVERTER VALVE, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 6495408COPERION WAESCHLE GMBH & CO KG
    19O-RING: INSIDE DIAMETER 46 MM, WIDTH 3.5 MM, APPLICATION ADIABATIC BOMB CALORIMETER, Mnfr: IKA-WERKE GMBH & CO. KG Mnfr Part No: 1740400IKA-WERKE GMBH & CO. KG
    31O-RING: INSIDE DIAMETER 48 MM, WIDTH 3 MM, MATERIAL FKM, FFT: EQUIP: XV-9653,9564,9557, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 016590COPERION WAESCHLE GMBH & CO KG
    71O-RING: INSIDE DIAMETER 59 MM, WIDTH 3 MM, MATERIAL FKM, FFT: EQUIP: XV-8299,8294,8622,8621,8291,8237,8626,8969,8966,ETC, Mnfr: COPERION WAESCHLE GMBH & CO KG Mnfr Part No: 016482COPERION WAESCHLE GMBH & CO KG
    26O-RING: INSIDE DIAMETER 596 MM, WIDTH 9 MM, MATERIAL EPDM (FDA APPROVED), APPLICATION SILO ROOF MANHOLE, FFT: TYPE:GASKET, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: UNKJANSENS & DIEPERINK B.V.
    23O-RING: INSIDE DIAMETER 61.6 MM, WIDTH 2.62 MM, MATERIAL NBR, SHORE HARDNESS 70, APPLICATION ADDITIVE AND GRANULAR FEED SYSTEM, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 9324-70048K-TRON INTERNATIONAL INC.
    117O-RING: INSIDE DIAMETER 66.5 MM, WIDTH 3 MM, MATERIAL NBR, SHORE HARDNESS 70A, FFT: SOURCE:INDICATOR COVER FOR AM-1400 SERIES., OEM: YOKOGAWA ELECTRIC CORPORATION. OEM Part No: F9341JP, Mnfr: AFI, DAMMAM Mnfr Part No: UNK-
    17O-RING: MATERIAL NBR, FFT: WARREN RUPP MANSFIELD OHIO AIR POWERED DIAPHRAGM PUMPS; INCLUDES SPARE PARTS FOR: MODEL SB1-1/2-A; TYPE 4 SANDPIPER DIAPHRAGM; PUMP POWERED BY COMPRESSED AIR; MODEL SA2-A; TYPE 3; 2 IN SANDPIPER; DIAPHRAGM PUMP POWERED BY COMPRESSED AIR; FOR MODELS SB1-1/2-A; TYPE 4 AND SA2-A; TYPE 3; SERIAL NOS. 237550,217687,238161,158289, Suppl: UNKNOWN Suppl P/N: 560-020-360-
    53O-RING: MATERIAL VITON, APPLICATION MONITOR, FFT: FOR MODEL: MSS-B, Mnfr: SILVAN SANAYI A.S. TURKEY Mnfr Part No: 2090242871, Suppl: ANGUS Suppl P/N: ZMP705SILVAN SANAYI A.S. TURKEY
    53O-RING: MATERIAL VITON, APPLICATION MONITOR, FFT: FOR MODEL: MSS-B, Mnfr: SILVANI ANTINCENDI S.P.A. Mnfr Part No: 2090243251, Suppl: ANGUS Suppl P/N: ZMP704SILVANI ANTINCENDI S.P.A.
    75OUTLET, SERVICE: STANDARD UL, FFT: STYLE: 4 GANG; CATEGORY 6; SOCKET; COLOR: WHITE; WIRE SIZE: 22-24AWG, 100 PER PACK., Mnfr: SYSTIMAX Mnfr Part No: 760041988, Suppl: YOKOGAWA MIDDLE EAST EC Suppl P/N: UNKSYSTIMAX
    41PACKING, BULK: SHAPE SQUARE, MATERIAL ALCHEM, SIZE SQ 4 MM, APPLICATION ROPE, FFT: FOR PNEUMATIC CONVEYING SYSTEM, Mnfr: WAESCHLE COPERION GMBH Mnfr Part No: 032465WAESCHLE COPERION GMBH
    22PACKING, BULK: SHAPE SQUARE, MATERIAL PTFE ALCHEM 6375, SIZE SQ 5 X LG 1800 MM, APPLICATION SPHERO DIVERTER VALVE, FFT: NR.6375, Suppl: COPERION WAESCHLE GMBH & CO KG Suppl P/N: 032466, MANDRG: ET-M 49800/KAP.11/ 4V8 Rev: 0 Item: 5.5-
    37PACKING: MATERIAL PREFORMED GRAPHITE, TYPE STEM, Mnfr: CARRARA S.P.A. Mnfr Part No: 252/23-BJCARRARA S.P.A.
    19PACKING: MATERIAL PREFORMED GRAPHITE, TYPE STEM, Mnfr: CARRARA S.P.A. Mnfr Part No: X652/23-BJCARRARA S.P.A.
    49PACKING: SHAPE RECTANGULAR, MATERIAL GRAPHITE GR GTJ/PTFE, FFT: SET OF 5 PCS; FOR FORGED GATE GLOBE AND CHECK VALVE, 1/2 AND 3/4 IN, Mnfr: LVF ITALY Mnfr Part No: 54821LVF ITALY
    22PACKING: SHAPE RECTANGULAR, MATERIAL SS DIN WN 1.4542, TYPE FOLLOWER, FFT:, MNFR: SITEC-SIEBER ENGINEERING AG MNFR PART NO: 711.0503SITEC-SIEBER ENGINEERING AG
    20PACKING: SHAPE SQUARE, MATERIAL GRAPHITE GR GTJ/PTFE, SIZE 17.5 X 11.1 X 21 X 7 MM, FFT: WITH BOLT (AS ASTM A193 GR B7); FOR FORGED GATE GLOBE AND CHECK VALVE, 3/4 AND 1 IN, Mnfr: LVF ITALY Mnfr Part No: 55581, Suppl: R.P VALVES & GASKET SUPPLY CO Suppl P/N: 55581, MANDRG: 080203/43/46 Rev: 0 Item: 10, 11, 080251/1, 080202/2 Rev: 0 Item: 10, 11, 080214/5/9, 080400/1 Rev: 0 Item: 10, 11LVF ITALY
    36PACKING: SHAPE SQUARE; ROUND, MATERIAL P#6315CL, TYPE GLAND, FFT: FOR TANK MOUNTED TYPE ANGLE VALVE, Mnfr: NIPPON PILLAR PACKING CO LTD Mnfr Part No: 6315CL,  Suppl: MASONEILAN Suppl Part No: B-5657-5/58, Catalogue 75471 SECTIONAL Rev: 0 Item No: 5, 6, 7NIPPON PILLAR PACKING CO LTD
    24PAD: TYPE COUPLING THRUST, Mnfr: SPP PUMPS LTD. Mnfr Part No: 3564251SPP PUMPS LTD.
    17PANEL: TYPE DO TERMINATION, FFT: SOURCE:DO TERMINATION PANEL, 24VDC, 16PTS, COMMON, OEM: TRICONEX OEM Part No: 9662-810TRICONEX
    40PAPER, FILTER: SIZE DIA 55 MM, MICRON 5, SHAPE ROUND, FFT: 100PC/PK; #5, Mnfr: WHATMAN Mnfr Part No: CAT:1001-055, Mnfr: FISONS PLC Mnfr Part No: UNKNOWNWHATMAN
    20PIECE: TYPE THRUST, MATERIAL AS DIN WN 1.7709, FFT: FOR KICK VALVE (SIZE: DN76; PRESSURE RATING: 3600 BAR), Mnfr: BASF GMBH Mnfr Part No: UNK, Mnfr Drg 4025-P-SPJ021-02 Rev: 2 Item No: 13, Mnfr Drg N 54955-2B Rev: 0 Item No: 13BASF GMBH
    24PIN, DOWEL: DIAMETER 10 MM, LENGTH 40 MM, MATERIAL SS BS970 GR 321S31, Mnfr: SPP PUMPS LTD. Mnfr Part No: 21123-501-342-3SPP PUMPS LTD.
    31PIN, SPRING: DIAMETER 10 MM, LENGTH 70 MM, STANDARD ISO 8752, Mnfr: ANDRITZ AG Mnfr Part No: 131045280ANDRITZ AG
    98PIN: TYPE MOTOR PLUG, FFT: FOR  MOTOR OPERATED VALVES MODEL# SAM07.1-E13/GS40.2,SAM07.5-E13/GS40.2  EQUIPMENT# QV4251 TV4251 TV4252 QV4252 QV4253 KV4251 KV4252 KVF4254 KVF4256, MANUFACTURER:ALUMA RIESTER KG, POSTFACH-1362 D-79373 MULLHEIM GERMANY PHONE #: 007631-8090 FAX#:07607631-13218., Mnfr: ALUMA RIESTER KG Mnfr Part No: UNKNOWN,  Suppl: V-LINE EUROPE EXPORT MARKETING GMBH Suppl Part No: Z006.157ALUMA RIESTER KG
    194PIN: TYPE NEEDLE, MATERIAL SS, FFT: FOR CONNECTING ROD SMALL END OF NITROGEN COMPRESSOR, Mnfr: SIAD MACCHINE IMPIANTI S.P.A. Mnfr Part No: 20771SIAD MACCHINE IMPIANTI S.P.A.
    50PIN: TYPE SELF LOCKING, DIAMETER 3.4 MM, LENGTH 80 MM, MATERIAL STEEL, FFT:10 GAGE X SEE DETAIL; COMMISSIONNIG SPARE,  CATALOGUE NO: 10612-
    17PINION, GEAR: MATERIAL SS 304, SIZE D15 MM, NO OF TEETH 15, APPLICATION ADDITIVE AND GRANULAR FEED SYSTEM, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 9338-70024, MANDRG: 600755120 Rev: B2 Item: 10, Tag/Equip No: 4RV12-2612/13/14/15/16/17 - A, Equip/Tag Model No: S100 ADDITIVE REFILL FEEDER LINE 1, Equip/Tag Serial No: M381210/M381610/M381630/M381640/M381650/M381660K-TRON INTERNATIONAL INC.
    17PIPETTE: TYPE TRANSFER, CAPACITY 7.5 ML, MATERIAL LOW-DENSITY POLYETHYLENE (LDPE), FFT: DISPOSABLE; GRADUATED LARGE BULB; INCREMENTS: 0.05 ML; BULB DRAW: 3.2 ML; LENGTH: 15.5 CM; GRADUATION: 3 ML; PACK OF 500 EA, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: EW-06226-63COLE-PARMER INSTRUMENT COMPANY
    17PLATE: TYPE DOUBLE OUTLET FACE, SIZE SQ 8.6 CM, APPLICATION PCIMS, FFT:STYLE: 2 GANG; COLOUR: WHITE, MNFR: SYSTIMAX MNFR PART NO: 407900471SYSTIMAX
    25PLATE: TYPE FACE, SIZE WD 122.17 X LG 71.37 X THK 7.37 MM, MATERIAL THERMO PLASTIC, STANDARD UL, FFT:SHAPE: QUADILATERAL, MNFR: SYSTIMAX MNFR PART NO: M14L-246,  CATALOGUE NO: 12022,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATESYSTIMAX
    90PLATE: TYPE FLOW, MATERIAL SS DIN WN 1.4401, APPLICATION HEAT EXCHANGER (NT350M H0.5) CONDENSATE COOLER, STANDARD DIN 3.1, FFT:WITH LOC-IN PUNCHING 1234 (EPDM), MNFR: GEA-ECOFLEX MNFR PART NO: 380203150, MNFR: GEA-ECOFLEX MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATEGEA-ECOFLEX
    1140PLATE: TYPE SUPPORT, SIZE WD 50 X LG 50 X THK 3 MM, MATERIAL SS, GRADE 410, FFT:1 HOLE ( 10 MM ); 4 PASS EVEN TRAYS 2 U /I 100;,  CATALOGUE NO: 10093,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE-
    95PLATE: TYPE SUPPORT, SIZE WD 50 X LG 55 X THK 3 MM, MATERIAL SS 304L, FFT:1 HOLE ( 10 MM ),  CATALOGUE NO: 12456,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE-
    2352PLATE: TYPE SUPPORT, SIZE WD 50 X LG 59 X THK 3 MM, MATERIAL SS, FFT:4 PASS EVEN TRAYS 2 U /I 100;,  CATALOGUE NO: 12541,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATE-
    93PLUG, ELECTRICAL: TYPE INTERLOCK, POLE 3, WIRE 2, ELECTRICAL RATING 220-240 V, STANDARD IEC 309, Mnfr: COOPER CROUSE HINDS Mnfr Part No: GHG 511 7306 R0001COOPER CROUSE HINDS
    28PLUG, ELECTRICAL: TYPE MATING, POLE 3, WIRE 2, ELECTRICAL RATING 600VAC/250VDC 50/400HZ, FFT: KRYDON MATERIAL; WATERTIGHT; CORROSION RESISTANT, MEMA 4X; 1 IN HUB SIZE, Mnfr: COOPER CROUSE HINDS Mnfr Part No: NPJ3384COOPER CROUSE HINDS
    18PLUG, HOSE: FFT: FOR BAGGING MACHINE, Mnfr: MASCHINENFABRIK MOLLERS GMBH Mnfr Part No: 10666MASCHINENFABRIK MOLLERS GMBH
    50PLUG, PIPE: FFT:FOR EQUIP:10-FT-1768,20-FT-2010/2100/2386/2388,40-FT-4122, MNFR: YOKOGAWA ELECTRIC CORPORATION. MNFR PART NO: F9340SB, DRAWING CMPL 01C21B00-01E POS P-1,3,4 REV: 0,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEYOKOGAWA ELECTRIC CORPORATION
    17PLUG, PIPE: SIZE 1/4 IN, HEAD HEX 9/16 IN, CONNECTION NPT, FFT:LENGTH: 0.96 IN, MNFR: SWAGELOK  MNFR PART NO: 625-4-P,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESWAGELOK
    29PLUG, PIPE: SIZE 1-1/8 IN, HEAD HEX, CONNECTION THREADED UNF 12 TPI, MATERIAL CS ASTM A105, GRADE CL2A, FFT:TYPE: SHOULDER; FOR SHEET, MNFR: VISION METAL CO. LTD. MNFR PART NO: VM-118-42,  SUPPL: S&T CORPORATION SUPPL PART NO: PB-52752-5,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEVISION METAL CO. LTD.
    37PLUG, PIPE: SIZE 3/8 IN, HEAD HEX, CONNECTION NPT, MATERIAL FORGED STEEL, RATING 6000 LB, STANDARD ASME B1.20.1; AME B16.11, FFT: HIGH PRESSURE; THREADED; BLACK FINISH; FOR USE WITH SCHEDULE 160 STEEL PIPE NIPPLES,  Suppl: MCMASTER-CARR Suppl Part No: 4513K323,  MTC REQUIRED ALONG WITH MATERIAL-
    57PLUG, TUBE: MATERIAL SS ASTM A182 GR F304, DIAMETER 1-1/4-UNF 12TPI-CL-2A, LENGTH 36 MM, Mnfr: S&T CORPORATION Mnfr Part No: VM-114-36, Suppl: CTCI MACHINERY CORPORATION. Suppl P/N: PB-41311-5, MANDRG: V-E41311-DTL-001 Rev: 5 Item: 5S&T CORPORATION
    63PORT: TYPE SEAL, FFT:MATERIAL: SS 316; CONNECTION: FNPT 1/2 IN; SIZE: 11 IN-
    73PROTECTOR: TYPE SURGE, STANDARD CE; FM, FFT: NOMINAL VOLTAGE: 24V; RATED VOLTAGE: 32V; NOMINAL CURRENT: 1.5A; NOMINAL DISCHARGE CURRENT: 3KA; BANDWIDTH: 50MHZ; ENCLOSURE: IP20; TEMPERATURE RANGE: -40 TO 80DEG C; MOUNT: DIN RAIL 35 X 15MM, Mnfr: MTL INSTRUMENTS Mnfr Part No: SLP32D, Suppl: YOKOGAWA NEDERLAND BV Suppl P/N: 33450102497MTL INSTRUMENTS
    35RAIL: TYPE INSULATING, MATERIAL METAL, FFT: FOR 43628,43629,43630,43631,43632; P.ONO: N8-M3-PO-90-2201SP, Suppl: GOLDEN WING EST. Suppl P/N: 50322318-
    20REDUCER, CONDUIT: SIZE 1-1/2 X 3/4 IN, MATERIAL AL, CONNECTION MNPT X FNPT, Mnfr: COOPER CROUSE HINDS Mnfr Part No: RE52SA6003COOPER CROUSE HINDS
    44REDUCER, CONDUIT: SIZE 1-1/2 X 3/4 IN, MATERIAL STEEL, CONNECTION THD, CLASSIFICATION CL1 GR AB, STANDARD CSA; UL, FFT: STEEL NUT HEAD, Mnfr: COOPER CROUSE HINDS Mnfr Part No: RE 52, Suppl: MUBARAK R AL-BUAINAIN CORP Suppl P/N: UNK, Suppl: ADWAN MARKETING CO. LTD. Suppl P/N: UNKCOOPER CROUSE HINDS
    19REDUCER, PIPE: SIZE 1 X 1/2 IN, MATERIAL BRASS, CONNECTION MNPT X FNPT, STANDARD CSA; UL, FFT:CLASSIFICATION:EX D/EX E/EX N, MNFR: CMP PRODUCTS MNFR PART NO: 737DT3T1, MNFR: EGS ELECTRICAL GROUP MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATECMP PRODUCTS
    24REDUCER, PIPE: SIZE 1-1/4 X 1 IN, MATERIAL BRASS NICKEL PLTD, CONNECTION MNPT X FNPT, FFT:EX D/EX E/EX N, MNFR: COOPER CROUSE HINDS MNFR PART NO: 737DT4T35, MNFR: WESCO INTERNATIONAL MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATECOOPER CROUSE HINDS
    44REFLECTOR: TYPE DOME, Mnfr: GENERAL ELECTRIC APPLIANCES Mnfr Part No: HRD400ALZGENERAL ELECTRIC APPLIANCES
    17RELAY: CONTACT RATING 125 VDC, TYPE AUXILIARY, CONTACT ARRANGEMENT 2NO-2NC, FFT:, MNFR: HYUNDAI HEAVY INDUSTRIES MNFR PART NO: 5220280809,  MODEL/MACHINE NO: HMTHYUNDAI HEAVY INDUSTRIES
    18RELAY: CONTACT RATING 24VDC 15MA, COIL VOLTAGE 24 VDC, TERMINAL SCREW, MOUNT DIN RAIL, STANDARD CE; FM, Mnfr: PHOENIX CONTACT Mnfr Part No: PSR-SCP- 24DC/FSP/2X1/1X2,  Model/Machine No: 7991007PHOENIX CONTACT
    19RELAY: CONTACT RATING 24VDC 6.6MA, TYPE CHANGE OVER, MOUNT PLUG-IN, TERMINAL SCREW, STANDARD CE, CONTACT MATERIAL SILVER TIN OXIDE (AGSNO), FFT:SIZE: WD 6.1 X LG 93 X DP 92MM; WITH FUSE; FOR CONVEYOR PACKAGE , MNFR: WEIDMULLER. MNFR PART NO: RSS113024WEIDMULLER
    20RELAY: CONTACT RATING 250VAC 10A 2W, CONTACT ARRANGEMENT 2NO-2NC, CONTACT MATERIAL AGNI, COIL VOLTAGE 24 VDC, TERMINAL SCREW, MOUNT DIN RAIL, STANDARD CE, Mnfr: FINDER Mnfr Part No: 59.32.9.024.0050FINDER
    20RELAY: TYPE AUXILARY, CONTACT RATING 240V 10A, CONTACT ARRANGEMENT 2NO-2NC, CONTACT MATERIAL SILVER CADMIUM OXIDE (AGCDO), ACTION DPDT, COIL VOLTAGE 120 V, TERMINAL (8) PIN, MOUNT SOCKET, STANDARD CSA; UL, FFT: FOR LOW VOLTAGE SWITCHGEAR, Mnfr: TYCO Mnfr Part No: PPI/KRPA-11AG-120TYCO
    18RELAY: TYPE AUXILARY, CONTACT RATING 660V 4A, CONTACT ARRANGEMENT 3NO-1NC, COIL VOLTAGE 125 VDC, MOUNT DIN RAIL, ENCLOSURE IP20, STANDARD CE, Mnfr: HYUNDAI HEAVY INDUSTRIES Mnfr Part No: HMT31RHYUNDAI HEAVY INDUSTRIES
    18RELAY: TYPE AUXILIARY , CONTACT RATING 120 VAC, CONTACT ARRANGEMENT 2NO-2NC, Mnfr: HYUNDAI HEAVY INDUSTRIES Mnfr Part No: 5220280810,  Model/Machine No: HMX 22 Mnfr: HYUNDAI HEAVY INDUSTRIESHYUNDAI HEAVY INDUSTRIES
    36RELAY: TYPE AUXILIARY POWER, CONTACT RATING 250VAC 10A, CONTACT ARRANGEMENT 2NO-2NC, CONTACT MATERIAL AGCDO, ACTION DPDT, COIL VOLTAGE 24 VDC, TERMINAL SOLDER/PLUG-IN, STANDARD CE; CSA; UL, FFT: WITH SOCKET, RED LED OPERATION INDICATOR; FOR EMERGENCY DIESEL GENERATOR, Mnfr: HONEYWELL Mnfr Part No: SZR-LY2-N1/24VDCHONEYWELL
    53RELAY: TYPE AUXILIARY POWER, CONTACT RATING 250VAC 10A, CONTACT ARRANGEMENT 4NO-4NC, CONTACT MATERIAL AGCDO, ACTION 4PDT, COIL VOLTAGE 24 VDC, TERMINAL PLUG-IN/SOLDER, STANDARD CE; CSA; UL, FFT: WITH SOCKET, RED LED OPERATION INDICATOR; FOR EMERGENCY DIESEL GENERATOR, Mnfr: HONEYWELL Mnfr Part No: SZR-LY4-N1/24VDCHONEYWELL
    26RELAY: TYPE OPTOCOUPLER, CONTACT RATING 10-30VDC 2-8MA, COIL VOLTAGE 24 VDC, TERMINAL BLADE, STANDARD UL, Mnfr: WAGO Mnfr Part No: 859730, Suppl: YOKOGAWA ENGINEERING ASIA PTE LTD Suppl P/N: UNKWAGO
    20RIBBON: MATERIAL PAPER, APPLICATION TRISTIMULUS COLORIMETER, FFT: SUPPLIED IN ROLL, Mnfr: KONICA MINOLTA HOLDINGS INC. Mnfr Part No: DP-A22, Suppl: ADVANCED LAB SERVICE Suppl P/N: UNKKONICA MINOLTA HOLDINGS INC.
    23RING, BACK-UP: FFT: FOR STEAM TURBINE, Mnfr: ELLIOTT TURBOMACHINERY LTD Mnfr Part No: P700R2339ELLIOTT TURBOMACHINERY LTD
    20RING, BACK-UP: INSIDE DIAMETER 18 MM, OUTSIDE DIAMETER 23 MM, THICKNESS 5 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: HK013011/591BHDT GMBH
    43RING, CIRCLIP: TYPE INTERNAL, SIZE 36 MM, STYLE PIN HOLES, MATERIAL SPRING STEEL, FFT: GUDGEON PIN:FOR 514-K-02,NITROGEN COMPRESSOR,MDL 1EHY2GT,SERIAL NO. 9910CR, Mnfr: HOWDEN DONKIN BLOWERS P/N: 1300-36, DRAWING: 1.5 Rev: 0HOWDEN
    45RING, CIRCLIP: TYPE INTERNAL, SIZE DIA 28 MM, THICKNESS 1.2 MM, STYLE PIN HOLES, MATERIAL TS JIS G4401 GR SK5, STANDARD DIN 472, FFT: (C-TYPE) FOR HOLE PHYSICAL DIMENSIONS FREE DIA 25 9 X OD 30 1 MM, Mnfr: NARASAKI SEISAKUSYO CO LTD Mnfr Part No: #28, DRAWING: K-840142 Rev: 0 Item: 68, SPR: 145 Rev: 0 Item: 1150NARASAKI SEISAKUSYO CO LTD
    48RING, CIRCLIP: TYPE INTERNAL, SIZE DIA 42 MM, THICKNESS 1.75 MM, STYLE PIN HOLES, MATERIAL TS JIS G4401 GR SK5, STANDARD DIN 472, FFT: C-TYPE FOR HOLE PHYSICAL DIMENSIONS FREE DIA 38 5 X OF 45 5 MM, Mnfr: MITSUBISHI CHEMICAL CORPORATION Mnfr Part No: #42, DRAWING: K-840151 Rev: 0 Item: 77, SPR: 145 Rev: 0 Item: 1133MITSUBISHI CHEMICAL CORPORATION
    30RING, WEAR: APPLICATION BOWL, MATERIAL SS ASTM A743 GR CA15, Mnfr: CLYDE UNION LTD Mnfr Part No: A09601AC13, MANDRG: DBB-20116 Rev: 0 Item: 2070CLYDE UNION LTD
    30RING, WEAR: APPLICATION IMPELLER SERIES, MATERIAL SS ASTM A743 GR CA15, Mnfr: CLYDE UNION LTD Mnfr Part No: A09608AC12, MANDRG: DBB-20116 Rev: 0 Item: 2120CLYDE UNION LTD
    18RING, WEAR: APPLICATION INTER COVER DISCHARGE SIDE/LOWER BEARING, INSIDE DIAMETER 138 MM, MATERIAL SS 304 HARDENING, THICKNESS 20 MM, OUTSIDE DIAMETER 170 MM, MNFR: SHIN NIPPON MACHINERY CO. LTD MNFR PART NO: 4S-24463SHIN NIPPON MACHINERY CO. LTD
    23RING: APPLICATION 2ND STAGE BOOSTER CYLINDER 2, STANDARD ASTM, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: SRP5843107NUOVO PIGNONE S.P.A, ITALY
    40RING: TYPE INSULATING, Mnfr: KEMPPI OY, FINLAND Mnfr Part No: 9878013,  NEEDKEMPPI OY, FINLAND
    39ROD, TIE: APPLICATION 2ND STAGE BOOSTER CYLINDER 2, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: FVG201300450NUOVO PIGNONE S.P.A, ITALY
    39ROD, TIE: APPLICATION 3RD STAGE BOOSTER CYLINDER 4, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: FVG301700450NUOVO PIGNONE S.P.A, ITALY
    29ROD, TIE: APPLICATION 3RD STAGE BOOSTER CYLINDER 4, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: FVG422000450NUOVO PIGNONE S.P.A, ITALY
    47ROD, WELDING: CLASS AWS A5.22, DIAMETER 2.2 MM, LENGTH 1000 MM, MATERIAL E-309L-16, Mnfr: WELDING ALLOYS LTD. Mnfr Part No: AWS A5.22R309LT1-5WELDING ALLOYS LTD.
    304ROD, WELDING: DIAMETER 2.4 MM, LENGTH 175  MM, MATERIAL TUNGSTEN, FFT: 1% ZIRCONIA; FOR ALUMINIUM WELDS, Mnfr: MUREX WELDING PRODUCTS Mnfr Part No: 0151574052 (NEW), Mnfr: MUREX WELDING PRODUCTS Mnfr Part No: 1415142 (OBSOLETE)MUREX WELDING PRODUCTS
    97SCREW, CAP: 5/8 IN DIAMETER, THREADS 11 UNC, 2 IN LENGTH, HEAD HEX SOCKET, FFT: IN HP COMPRESSOR ASSEMBLY; MODEL 88M8I, SERIAL NUMBER C208002, IBNSINA COMPRESSOR C 201 B/C, Mnfr: ELLIOTT COMPANY Mnfr Part No: P 23 T 3230, DRAWING: WC-952661-66 Rev: 0 Item: 18ELLIOTT COMPANY
    23SCREW, CAP: DIAMETER 1 IN, LENGTH 3.50 IN, THREADS UNC 8 TPI, STANDARD ASME B1.1, FFT: 12PT; CBORE; FOR TURBINE DRIVER AIR COMPRESSOR, Mnfr: DRESSER-RAND  Mnfr Part No: 202195-007DRESSER-RAND
    17SCREW, CAP: DIAMETER 1/2 IN, LENGTH 1-1/4 IN, THREADS UNC 13 TPI, Mnfr: ELLIOTT TURBOMACHINERY LTD Mnfr Part No: P10C177-3, Mnfr Drg 1014001-GR1 Rev: 0 Item No: 34ELLIOTT TURBOMACHINERY LTD
    99SCREW, CAP: DIAMETER 3/8 IN, THREADS 16 UNC, LENGTH 1-1/2 IN, HEAD HEX, MATERIAL SS, GRADE 316, FFT: FOR CLOTH TO TRAY, Mnfr: SIEMENS WATER TECHNOLOGIES Mnfr Part No: 10088524SIEMENS WATER TECHNOLOGIES
    18SCREW, CAP: DIAMETER 5/16 IN, THREADS UNF 24 TPI, LENGTH 1 IN, HEAD SOCKET, FFT: FOR PITOT TUBE, Mnfr: MERIAM INSTRUMENTS Mnfr Part No: ZB70537-3MERIAM INSTRUMENTS
    21SCREW, CAP: DIAMETER 5/8 IN, LENGTH 1-1/2 IN, THREADS UNC 11 TPI, HEAD HEX, STANDARD ASME B1.1, FFT: FOR GEARBOX FD FAN, Mnfr: LUFKIN INDUSTRIES INC. Mnfr Part No: N9085368LUFKIN INDUSTRIES INC.
    18SCREW, CAP: DIAMETER M4, LENGTH 15 MM, MATERIAL AS, HEAD ALLEN, THREADS 0.7 MM, GRADE 8.8, FFT:W/ WASHER,  SUPPL: UNKNOWN SUPPL PART NO: UNK-
    20SCREW, CAP: DIAMETER M40, LENGTH 365 MM, HEAD HEX SOCKET, Mnfr: KOBELCO (KOBE STEEL, LTD. ) Mnfr Part No: BS-425G10A-35B#02KOBELCO (KOBE STEEL, LTD. )
    25SCREW, CAP: FFT: SCREW; APPLICABLE FOR RECYCLE COMPRESSOR, Mnfr: ELLIOTT-EBARA Mnfr Part No: BSH-B12035, DRAWING: BR021561402-490-1 Rev: 5, SPR: EG-019 Rev: 0 Item: 2-8, Model/Machine No: 200TC, Serial No: R021561402, Tag/Equip No: K-2115 / K-4115ELLIOTT-EBARA
    34SCREW, CAP: THREADS FULL, HEAD HEX SOCKET, MATERIAL SS 316L, Mnfr: JOHN CRANE INC. Mnfr Part No: 87100910, Suppl: EBARA CORPORATION Suppl P/N: R070118701-MS-12JOHN CRANE INC.
    42SCREW, MACHINE: DIAMETER M20, LENGTH 200 MM, HEAD HEX, MATERIAL 1.7258, STANDARD DIN 933,  MTC-
    169SCREW, MACHINE: M12 DIAMETER, THREADS 1.75 MM, 35 MM LENGTH, HEAD SLOTTED CSK, MATERIAL STEEL, STANDARD DIN 963, GRADE 8.8, FFT: PRODUCT CLASS A-
    18SCREW, SET: DIAMETER 10 MM, LENGTH 1/4 IN, THREADS 24 TPI, HEAD ALLEN, POINT CUP, MATERIAL SS, FFT: PATTERN SLEEVE; APPLICATION: 3-WAY HYDRANT MONITOR NOZZLE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 765025, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 30,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    18SCREW, SET: DIAMETER 3/8 IN, THREADS UNC 16 TPI, LENGTH 1-1/4 IN, STANDARD ASME B1.1, Mnfr: ELLIOTT-EBARA Mnfr Part No: P23G100, Suppl: FLOWSERVE Suppl P/N: UNK, MANDRG: 1009163 Rev: 0 Item: 83ELLIOTT-EBARA
    37SCREW, SET: DIAMETER M18, LENGTH 100 MM, THREADS 2.5 MM, HEAD SQUARE, FFT: OS&D#497, Mnfr: RUHRPUMPEN Mnfr Part No: UNKRUHRPUMPEN
    93SCREW, SET: DIAMETER M8, LENGTH 25 MM, THREADS 1.25 MM, HEAD SLOTTED, POINT LONG DOG, STANDARD EN 27435, Mnfr: ANDRITZ AG Mnfr Part No: 13107-2158ANDRITZ AG
    31SCREW, SET: HEAD HEX SOCKET, MATERIAL STEEL (HTS), FFT: SEAL IDENTIFIER: 4.125 IN; TYPE 164; INTERNATIONAL SEAL CODE-BSTFN, Mnfr: JOHN CRANE INC. Mnfr Part No: 81673093JOHN CRANE INC.
    31SCREW, SET: HEAD HEX SOCKET, MATERIAL STEEL (HTS), FFT: SEAL IDENTIFIER-3.125 IN; TYPE 1648; INTERNATIONAL SEAL CODE-BSTFN, Mnfr: JOHN CRANE INC. Mnfr Part No: 81673069JOHN CRANE INC.
    20SCREW, SET: MATERIAL SS, GRADE 316, FFT: FOR CARBONATE TRANSFER PUMP, Mnfr: EBARA CORPORATION Mnfr Part No: SCS-C281EBARA CORPORATION
    31SCREW, SET: THREADS 10, HEAD HEX SOCKET, MATERIAL SS 316, FFT: FOR COOLING WATER CIRCULATION PUMP, Mnfr: JOHN CRANE INC. Mnfr Part No: 6110-1500-016JOHN CRANE INC.
    29SCREW: 1/4 IN DIAMETER, FFT: IN UNION; DM8; FOR NEW BAGGING MACHINES SERIAL NO: 50387 & 50389, Mnfr: DIAMANT Mnfr Part No: 02823300DIAMANT
    90SCREW: DIAMETER M3, TYPE PAN HEAD, LENGTH 40 MM, THREADS FULL, HEAD SLOTTED, MATERIAL BZP STEEL, STANDARD BS4183; DIN 85, FFT: METRIC; BRIGHT ZINC PLATED FINISHED AND CLEAR PASSIVATED; 100/PACK, Mnfr: RS COMPONENTS LTD Mnfr Part No: 290067RS COMPONENTS LTD
    22SCREW: FFT: RETAINING RING; FOR ON-OFF VALVE, Mnfr: FISHER Mnfr Part No: 1N4006X0102, Mnfr Drg 24J2502 Rev: 0 Item No: 19,  Equip Serial No: 18537261,  Equip Model No: 20 A31A-G01010 (SR4)EMERSON - FISHER
    95SCREW: OEM: MOLLERS. OEM Part No: 707357, Suppl: MOLLERS. Suppl P/N: UNKNOWN, MANDRG: METAL DETECTOR Rev: 0 Item: 36BMOLLERS.
    47SCREW: OEM: MOLLERS. OEM Part No: 707360, MANDRG: METAL DETECTOR Rev: 0 Item: 39MOLLERS.
    47SCREW: OEM: MOLLERS. OEM Part No: 707361, MANDRG: METAL DETECTOR Rev: 0 Item: 41MOLLERS.
    95SCREW: TYPE LOCKING, OEM: MOLLERS. OEM Part No: 707343, Suppl: MOLLERS. Suppl P/N: 707343, MANDRG: METAL DETECTOR Rev: 0 Item: 18MOLLERS.
    95SCREW: TYPE LOCKING, OEM: MOLLERS. OEM Part No: 707344, Suppl: MOLLERS. Suppl P/N: 707344, MANDRG: METAL DETECTOR Rev: 0 Item: 19MOLLERS.
    45SCREW: TYPE VENT, FFT: FOR TRANSMITTER VENT PLANT 1EG/UTL., Mnfr: YOKOGAWA ELECTRIC CORPORATION. Mnfr Part No: D0114PBYOKOGAWA ELECTRIC CORPORATION
    47SCREW: TYPE WEAR AND TEAR, FFT: FOR START-STOP (INDEXING) CONVEYOR, OEM: MOLLERS. OEM Part No: 707289, Suppl: MOLLERS. Suppl P/N: 707289, MANDRG: GLUE DEVICE Rev: 0 Item: 52MOLLERS.
    25SEAL, OIL: TYPE LIP, INSIDE DIAMETER 30 MM, OUTSIDE DIAMETER 47 MM, WIDTH 1 MM, MATERIAL PTFE, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 9324-40851K-TRON INTERNATIONAL INC.
    24SEAL, OIL: TYPE U-SHAPED, INSIDE DIAMETER 8.4 MM, OUTSIDE DIAMETER 16 MM, WIDTH 1.6 MM, FFT: APPLICATION ADDITIVE AND GRANULAR FEED SYSTEM, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 9359-46657K-TRON INTERNATIONAL INC.
    24SEAL, RING: APPLICATION SCREW FEEDER, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 9324-70041K-TRON INTERNATIONAL INC.
    77SEAL, RING: MATERIAL METAL, Mnfr: ANDRITZ AG Mnfr Part No: 131002542ANDRITZ AG
    87SEAL, RING: TYPE USIT, INSIDE DIAMETER 12.7 MM, OUTSIDE DIAMETER 18 MM, THICKNESS 1.5 MM, MATERIAL METAL RING-STEEL SPCC/SEALING BEAD-NBR, APPLICATION SPHERO DIVERTER VALVE, FFT: SHORE HARDNESS: 72, Suppl: COPERION WAESCHLE GMBH & CO KG Suppl P/N: 000522-
    154SEAL, RING: TYPE USIT, INSIDE DIAMETER 16.7 MM, OUTSIDE DIAMETER 24 MM, THICKNESS 1.5 MM, MATERIAL METAL RING-STEEL SPCC/SEALING BEAD-NBR, APPLICATION SPHERO DIVERTER VALVE, FFT: SHORE HARDNESS: 72, Suppl: COPERION WAESCHLE GMBH & CO KG Suppl P/N: 010845, MANDRG: ET - M 49800 / Kap. 11/ 4V8 Rev: 0 Item: 6.3COPERION WAESCHLE GMBH & CO KG
    97SEAL: TYPE END, SIZE LG 100 MM, APPLICATION HEAT SHRINKABLE, Mnfr: PARKER HANNIFIN UK LTD Mnfr Part No: HSB-1-SHORT-K-1/2PARKER HANNIFIN UK LTD
    172SEAL: TYPE HEAT SHRINKABLE ENCLOSURE ENTRY, APPLICATION TUBING BUNDLE, STANDARD CSA; FM, Mnfr: TYCO THERMAL CONTROLS Mnfr Part No: 260993-000, Catalogue No: RTB-RTBK-CES4 Mnfr: RAYCHEM TYCO CORPORATIONTYCO THERMAL CONTROLS
    22SEAL: TYPE INJECTOR, SIZE OD 3/8 IN, APPLICATION CARBON STOP, Mnfr: CATERPILLAR INC Mnfr Part No: 9L9098, Suppl: SPP PUMPS LTD. Suppl P/N: UNKNOWNCATERPILLAR INC
    97SEAL: TYPE STRAP, SIZE LG 40.6 MM, MATERIAL HIGH-DENSITY POLYPROPYLENE, FFT: FOR CLOSE TOLERANCES. FITS ANY CLOSURE LARGER THAN 5/32 IN (4 MM), Mnfr: AMERICAN CASTING AND MFG CORP Mnfr Part No: 9001-16AMERICAN CASTING AND MFG CORP
    18SEAT, VALVE: OUTSIDE DIAMETER 24 MM, THICKNESS 10 MM, FFT: FOR HIGH PRESSURE CYLINDER, Mnfr: BHDT GMBH Mnfr Part No: VS006007/593BHDT GMBH
    18SEAT, VALVE: VALVE TYPE DISCHARGE, FFT: FOR BOOSTER 1ST STAGE VALVE, Mnfr: NUOVO PIGNONE S.P.A, ITALY Mnfr Part No: SNO9870029NUOVO PIGNONE S.P.A, ITALY
    17SEPTUM: FFT: FOR 6.1448.000, 5PCS/ SET, FOR EQUIP #:LP B59, PON0-V2-PO-00-0751SP, Mnfr: SHIMADZU CORPORATION Mnfr Part No: 6.1448.010Metrohm
    1100SEPTUM: SIZE DIA 20 MM, MATERIAL PTFE, FFT:USED WITH HP 20MM CRIMO CPS; 0719; (1PK=100 EACH), MNFR: AGILENT TECHNOLOGIES MNFR PART NO: 9301-0719, MNFR: HEWLETT PACKARD MNFR PART NO: 930, MNFR: NATIONAL SCIENTIFIC COMPANY LTD MNFR PART NO: UNKNOWN, MNFR: UNKNOWN MNFR PART NO: 73831A-20, REFERENCE NO: C4020-32 MNFR: THERMO HYPERSIL-KEYSTONENATIONAL SCIENTIFIC COMPANY LTD
    375SEPTUM: SIZE DIA 25 X THK 3 MM, MATERIAL PTFE COATED BUTYL, FFT: 2 SET OF127PCS, Mnfr: DOVIANUS B.V. Mnfr Part No: 1941600DOVIANUS B.V.
    375SEPTUM: SIZE DIA 25 X THK 3 MM, MATERIAL VITON, FFT: EXCELLENT CHEMICAL RESISTANCE, EXCELLENT AGING RESISTANCE (1 SET OF 127 PCS), Mnfr: DOVIANUS B.V. Mnfr Part No: 1942400DOVIANUS B.V.
    38SET: TYPE DISC, APPLICATION BOOSTER PRIMARY COMPRESSOR, FFT:SUPPLIED IN SET; FOR 1ST BOOSTER PRIMARY COMPRESSOR, MNFR: NUOVO PIGNONE S.P.A, ITALY MNFR PART NO: SQZ21768NUOVO PIGNONE S.P.A, ITALY
    97SET: TYPE FERRULE, APPLICATION FRONT AND BACK, FFT: COMPRESSION TYPE; FOR FRACTIONAL TUBE; SS 18 CR-10NI-2MO TO ASTM A479 TP316 OR EQUIVALENT; SIZE 1/2"" TUBE OD, Mnfr: PARKER HANNIFIN CORPORATION Mnfr Part No: 8FF8-SS316 & 8BF8-SS316, Mnfr: HY-LOK CORP. Mnfr Part No: CFS-8-SS316PARKER HANNIFIN CORPORATION
    34SET: TYPE FILTER GUAGE, APPLICATION AIR HANDLING UNIT OF HVAC, FFT: REF: CT#3280A358, Mnfr: ZAMIL AIR CONDITIONERS Mnfr Part No: 80108553CLIMA TECH AIRCONDITIONERS GMBH
    17SET: TYPE SPRING, APPLICATION MECHANICAL SEAL, FFT: FOR MECHANICAL SEAL, Mnfr: JOHN CRANE INC. Mnfr Part No: M1-48-1760/6, 19JOHN CRANE INC.
    18SHAFT: LENGTH 745 MM, MATERIAL CS ASTM A238 GR C/SS400, FFT:FOR FORCED DRAFT FAN, MNFR: TONG YANG MAGIC CO. LTD. MNFR PART NO: UNK, MNFR DRG F07501-01B-11D04 REV: 2 ITEM NO: 3,  EQUIP SERIAL NO: FH07-501,  EQUIP MODEL NO: TA-V-IAD #16.0,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATETONG YANG MAGIC CO. LTD.
    20SHEET, GASKET: SIZE WD 3 IN, THICKNESS 1/4 IN, MATERIAL BUNA-N, STANDARD ASME B16.21, FFT: WITH DUROMETER OF 40 SHORE; AS PER D-2000 STANDARD; FOR TOP COVER (UNCUT ROLLS); SHAPE: RECTANGLE, HOLES (30) DIA 5/8 IN, Mnfr: ENVIROTECH Mnfr Part No: GS-2BN-030-RLENVIROTECH
    80SHIELD: TYPE ELECTRODE SHORT, FFT: INCULDING O-RING, Mnfr: KEMPPI OY, FINLAND Mnfr Part No: 7990730,  THE CERTIFICATE IS REQUERDKEMPPI OY, FINLAND
    118SHIM: TYPE LATTICE BEAM, SIZE ID 100 X OD X 150 X THK 1.5 MM, MATERIAL SS, FFT:FOR TRAYS 1-2 U/I 99-100;,  CATALOGUE NO: 10094-
    19SLEEVE, SHAFT: MATERIAL SS 304, TYPE IMPELLER SPACER, , MNFR: SHIN NIPPON MACHINERY CO. LTD MNFR PART NO: 4S-21840,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATESHIN NIPPON MACHINERY CO. LTD
    30SLEEVE: TYPE HEAT RESISTANT, SIZE ID 2 X LG 5000 MM, MATERIAL FIBRE GLASS, FFT: FOR CONSUMABLE ITEMS: CABLES AND ACCESSORIES, Mnfr: ARAB ENGINEERS Mnfr Part No: 398-745, Suppl: RS COMPONENTS LTD Suppl P/N: UNK, CATALOGUE: RS 1999, PG 52 Rev: UNKARAB ENGINEERS
    50SLEEVE: TYPE HEAT RESISTANT, SIZE ID 4 X LG 5000 MM, MATERIAL FIBRE GLASS RED, FFT: FOR CONSUMABLE ITEMS: CABLES AND ACCESSORIES, Mnfr: ARAB ENGINEERS Mnfr Part No: 398-846, Suppl: RS COMPONENTS LTD Suppl P/N: UNK, CATALOGUE: RS 1999, PG 53 Rev: UNKARAB ENGINEERS
    30SLEEVE: TYPE HEAT RESISTANT, SIZE ID 6 X LG 5000 MM, MATERIAL FIBRE GLASS RED, FFT: FOR CONSUMABLE ITEMS: CABLES AND ACCESSORIES, Mnfr: ARAB ENGINEERS Mnfr Part No: 398-896, Suppl: RS COMPONENTS LTD Suppl P/N: UNK, CATALOGUE: RS 1999, PG 53 Rev: UNKARAB ENGINEERS
    28SOCKET, ELECTRICAL: TYPE COUPLER, ELECTRICAL RATING 24V 16A, CONTACT 3 PIN, Mnfr: TAYLOR TRANSFORMERS LTD Mnfr Part No: TAY1533,  MTC REQUIREDTAYLOR TRANSFORMERS LTD
    18SOLVENT: TRADE NAME OKS-2611, CONTAINER AEROSOL SPRAY CAN, TYPE UNIVERSAL CLEANER, FFT:STRONG CLEANING POWER; QUICK EVAPORATION WITHOUT LEAVING ANY RESIDUES; SHORT-TERM CORROSION PROTECTION THROUGH VCI ADDITIVES, MNFR: OKS SPEZIALSCHMIERSTOFFE GMBH MNFR PART NO: OKS-2611,  TEST CERTIFICATE COMMENTS: MSDS, TDS , PROD DATE, EXP. DATEOKS SPEZIALSCHMIERSTOFFE GMBH
    29SPACER: APPLICATION TURBINE, FFT:, MNFR: ELLIOTT TURBOMACHINERY LTD MNFR PART NO: P31V135,  EQUIP SERIAL NO: E702303-1; E702303-2 MNFR: UNKNOWNELLIOTT TURBOMACHINERY LTD
    18SPACER: TYPE BAFFLE, SIZE THK 0.118 IN, MATERIAL BRASS, FFT: 750 GPM; APPLICATION: 3-WAY HYDRANT MONITOR NOZZLE , Mnfr: AKRON BRASS CO. USA Mnfr Part No: 769658, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 16,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    18SPACER: TYPE BAFFLE, SIZE THK 0.218 IN, MATERIAL BRASS, FFT: 1000 GPM; APPLICATION: 3-WAY HYDRANT MONITOR NOZZLE, Mnfr: AKRON BRASS CO. USA Mnfr Part No: 769659, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 16,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTD,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USAAKRON BRASS CO. USA
    21SPARK PLUG: FFT: MATERIAL AS PER JIS STANDARD; FOR IGNITION SYSTEM, Mnfr: KOMATSU FORKLIFT CO. LTD. Mnfr Part No: 22401-FU412,  Model/Machine No: FR2B-D Mnfr: NGK SPARKPLUG CO LTDKOMATSU FORKLIFT CO. LTD.
    17SPEAKER: TYPE CEILING, SIZE DIA 165 MM, OHM 8 OHM, WATTAGE 6 W, STANDARD CE, FFT: MOUNT: FLUSH; WITH STANDARDISATION OF:ISO9001:2000, ISO 14001:2004, BSOHSAS 18001:2007, Mnfr: DNH Mnfr Part No: VES-561(T), Suppl: TYCO FIRE & SECURITY Suppl P/N: UNKDNH
    17SPEAKER: TYPE EXPLOSION PROOF LOUD, SIZE DIA 170 X LG 271 MM, OHM 8 OHM, WATTAGE 15 W, STANDARD BS-EN-60079, FFT: ENCLOSURE: IP66 AND IP67; CERTIFICATION: CENELEC EN50014, 18, 19, BASEEFA CERT NO: BAS00ATEX2097X; MOUNT: BRACKET WITH RATCHET; WITH GLAND (PN:E1FX) AND JUNCTION BOX (PTB00ATEX1002), Mnfr: TYCO FIRE & SECURITY Mnfr Part No: 15WExMNT/AB/DB4TYCO FIRE & SECURITY
    17SPEAKER: TYPE WEATHER PROOF LOUD, OHM 8 OHM, WATTAGE 15 W, FFT: WITH STANDARDISATION OF: ISO9001:2000, ISO 14001:2004, BSOHSAS 18001:2007, Mnfr: MEDC LTD Mnfr Part No: DB14XNN, Suppl: TYCO FIRE & SECURITY Suppl P/N: DB14TMEDC LTD
    39SPRING, VALVE: MATERIAL SS ASTM 17-7 PH, FFT: FOR DISCHARGE VALVE, Mnfr: COZZANI Mnfr Part No: MV30864COZZANI
    39SPRING, VALVE: MATERIAL SS ASTM 17-7 PH, FFT: FOR SUCTION VALVE, Mnfr: COZZANI Mnfr Part No: MV30863COZZANI
    95SPRING, VALVE: MATERIAL SS ASTM A313 GR 316, FFT:TYPE: BIAS, MNFR: FISHER MNFR PART NO: 24B0654X032,  SUPPL: ELLIOTT-EBARA SUPPL PART NO: UNK, MNFR DRG FIG 8-1, 8-2: DVC6000 REV: 0 ITEM NO: 78,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATEEMERSON - FISHER
    22SPRING, VALVE: MEAN DIAMETER 5.4 MM, BODY LENGTH 11.5 MM, WIRE DIAMETER 0.8 MM, FFT: DISCHARGE 1ST STAGE,FOR 613-K-01,NITROGEN COMPRESSOR,PP II PLANT, Mnfr: MSB Mnfr Part No: 106073017001, DRAWING: 6312221 Rev: 0 Item: 5058, Reference No: 165058 Mnfr: SULZER BURCKHARDTMSB
    119SPRING: MATERIAL HASTELLOY-C, FFT: FOR COOLING WATER CIRCULATION PUMP, Mnfr: JOHN CRANE INC. Mnfr Part No: 4977JOHN CRANE INC.
    19SPRING: MATERIAL INCONEL C276, Mnfr: JOHN CRANE INC. Mnfr Part No: 87003148, Suppl: EBARA CORPORATION Suppl P/N: R070118701-MS-3, MANDRG: G/F3077 Rev: B Item: 16, V-P41220-XS-001 Rev: 0 Item: 111JOHN CRANE INC.
    44SPRING: TYPE PLAIN, MATERIAL INCONEL C276, Mnfr: JOHN CRANE INC. Mnfr Part No: 81046003, Suppl: EBARA CORPORATION Suppl P/N: R070118701-MS-2JOHN CRANE INC.
    45SPRINKLER, FIRE PROTECTION: TYPE FUSIBLE LINK UPRIGHT, CONNECTION MNPT 1/2 IN, MATERIAL BRASS UNS-C23000, TEMPERATURE RATING 74 DEG, MOUNT PENDANT, K-FACTOR 80.6 M, STANDARD FM, FFT: FOR DELUGE VALVE, Mnfr: VIKING Mnfr Part No: 05508VIKING
    35SPRINKLER, FIRE PROTECTION: TYPE FUSIBLE LINK UPRIGHT, CONNECTION MNPT 3/4 IN, MATERIAL BRASS UNS-C23000, TEMPERATURE RATING 104 DEG, MOUNT PENDANT, K-FACTOR 11.5 M, STANDARD FM, FFT: FOR DELUGE VALVE, Mnfr: VIKING Mnfr Part No: 05516VIKING
    49SPROCKET: TYPE SINGLE HUB, STYLE DUPLEX, TEETH 15, OUTSIDE DIAMETER 118 MM, Mnfr: SBS Mnfr Part No: UNK, Mnfr: CHIARAVALLI TRANSMISSION SPA Mnfr Part No: Z18 - 3/4"" S, Suppl: EKATO Suppl P/N: UNKCHIARAVALLI TRANSMISSION SPA
    17STEM: TYPE STREAM SHAPER, FFT: NOZZLE, APPLICATION: 3-WAY HYDRANT MONITOR, OEM: AKRON BRASS CO. USA OEM Part No: 769661, Drawing 05-0136-2-DR1 Rev: 0 Item No: 26, Mnfr Drg 118747 Rev: 0 Item No: 6,  Equip Model No: 4461 Mnfr: AKRON BRASS CO. USA,  Reference No: ZMN244 Mnfr: ANGUS FIRE ARMOUR LTDAKRON BRASS CO. USA
    18STOPPER: SIZE 7.5 IN, MATERIAL PLASTIC, APPLICATION TITRATION STAND, Mnfr: METTLER TOLEDO INTERNATIONAL INC Mnfr Part No: 23452,  Equip Model No: V20/V30 Mnfr: KARL FISCHERMETTLER TOLEDO INTERNATIONAL INC
    17STRAINER, PIPING: TYPE T, SIZE 4 IN, MATERIAL SS 304, CONNECTION BW, MESH 80, FFT:DIMENSION: 80 X 54 X 345MM, MNFR: SPIRAX SARCO LTD MNFR PART NO: UNK, MNFR DRG SCH-0805-197-003 REV: 2, MNFR DRG SCH-0805-197-009 REV: 2,  MODEL/MACHINE NO: T1,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATESPIRAX SARCO LTD
    23STRAINER, PIPING: TYPE T-SHAPED, SIZE 3 IN, PRESSURE RATING -0.003 TO 0.8 BAR G, MATERIAL SS 304, CONNECTION BW, MESH 40, FFT:SCREEN, MNFR: SPIRAX SARCO LTD MNFR PART NO: UNK,  MODEL/MACHINE NO: T1,  TEST CERTIFICATE COMMENTS: MATERIAL TEST CERTIFICATESPIRAX SARCO LTD
    22STRAP, PIPE: MATERIAL SS, FFT:PIPE DIAMETER 89-150 MM, 1 PACKING EACH= 25 PCS, OEM: TYCO THERMAL CONTROLS OEM PART NO: PB600,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATETYCO THERMAL CONTROLS
    128STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UN, LENGTH 190 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO NUTS ASTM A194 GR 2H; FOR SECONDRY REFORMER, SUPPL: GODREJ & BOYCE SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    98STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 165 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH UN HEAVY HEX NUTS, MATL: A194 GR 2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE MATERIAL-
    25STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 185 MM, MATERIAL SS ASTM A320, MATERIAL GRADE B8-2, FFT:WITH HEAVY NUT ASTM A194 GR 8MA, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    18STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS HEAVY HEXAGON MATERIAL CS ASTM A194-2H; COMMODITY CODE: 510899; KOP SPARE ITEMS, SUPPL: NEW TRADING SERVICES DAMMAM SUPPL PART NO: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    55STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 205 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT; MAT: A194-2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE ITEM-
    104STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 230 MM, MATERIAL CS ASTM A193, MATERIAL GRADE B7, FFT:C/W 2 NUTS TOASTM A194-2HFOR CARBON STEEL VESSELS,FOR NO. 1 REACTOR, MNFR: BROWN FINTUBE CORPORATION MNFR PART NO: UNKNOWN, DRAWING 3929-3931 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEBROWN FINTUBE CORPORATION
    21STUD, CONTINUOUS THREAD: DIAMETER 1 IN, THREAD 8 UNC, LENGTH 250 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:HEX NUT TO ASTM A194 2H, MNFR: SANWA IRON WORKS CO LTD MNFR PART NO: L34M01, SPR 204/R 097 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESANWA IRON WORKS CO LTD
    18STUD, CONTINUOUS THREAD: DIAMETER 1/2 IN, THREAD UNC 13 TPI, LENGTH 3 MM, MATERIAL SS, MATERIAL GRADE 316, STANDARD ASME B1.1, FFT:FOR GRINDING MILL, MNFR: UNION PROCESS MNFR PART NO: 4S24-SSUNION PROCESS
    18STUD, CONTINUOUS THREAD: DIAMETER 1-1/2 IN, THREAD 8 UN, LENGTH 250 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:COMPLETE WITH 2 HEX NUTS TO ASTM A194 2H , DRAWING HT51640-4/6 REV: 0 ITEM NO: 65, SPR 134 REV: 0 ITEM NO: 108, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    26STUD, CONTINUOUS THREAD: DIAMETER 1-1/4 IN, THREAD 7 UNC, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS; MAT: ASTM 194 GR 2H; FOR STATIC FILTERS; SN: 7844/7845; EQUIP: 23V001/011, MNFR: BEA FILTRI, ITALY MNFR PART NO: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEBEA FILTRI, ITALY
    19STUD, CONTINUOUS THREAD: DIAMETER 1-1/4 IN, THREAD 8 UN, LENGTH 250 MM, MATERIAL SA 193 B7/SA 194 2H, MATERIAL GRADE B7, FFT:SOURCE: STUDS 1 1/4"" 8UN, 250 LG. W/ 2 NUTS. USED FOR TAG: V-1710., MNFR: SYSCON MNFR PART NO: 2003040189-3, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESYSCON
    27STUD, CONTINUOUS THREAD: DIAMETER 1-1/4 IN, THREAD 8 UN-2A, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH NUTS FS; SCREW THREAD FULL; WITH 2 SEMI-FINISH HEAVY HEXAGONAL NUTS; ASTM A194 GRADE2H; ANSI B1.1 CLASS 2B; TEMPERED ALLOY STEEL, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    29STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 TPI, LENGTH 125 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:FOR PRESSURE VESSEL CW (2) NUTS A194 GR 2H, MNFR: JIN SUNG MACHINERY CO. LTD MNFR PART NO: UNK, DRAWING VP-V2402A,B/2V2402A,B-002 REV: 0 ITEM NO: 12, SPR 3608 REV: 0 ITEM NO: 12JIN SUNG  MACHINERY CO. LTD
    32STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 160 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH 2 NUTS; MAT: SA 194 GR. 2H; FOR COLUMNS, DRAWING 5534 REV: UNK ITEM NO: POS 5-6, FOR TAG/EQUIP NO: 16 C 004, EQUIP SERIAL NO: 4068, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED-
    30STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 310 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W NUT TO ASTM A194 2H, MNFR: MITSUI ENGINEERING & SHIPBUILDING CO.,LTD. S UNKNOWNMITSUI ENGINEERING & SHIPBUILDING CO.,LTD.
    41STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 335 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W NUT TO ASTM A194 2H (LOCAL)-
    27STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 340 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:SIZE (H=D) FOR LARGE HEAT EXCHANGER - 1 C/W NUT TO ASTM A194 2H, MNFR: CHIYODA CORPORATION MNFR PART NO: UNKNOWNCHIYODA CORPORATION
    20STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 370 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W NUT TO ASTM 194 2H, MNFR: MITSUI ENGINEERING & SHIPBUILDING CO.,LTD. S UNKNOWN, DRAWING CK76388 PART 21 REV: 0, SPR 2002 12 REV: 0MITSUI ENGINEERING & SHIPBUILDING CO.,LTD.
    25STUD, CONTINUOUS THREAD: DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 410 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS, MATL: A194 GR 2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE MATERIAL-
    137STUD, CONTINUOUS THREAD: DIAMETER 1-3/8 IN, THREAD 8 UN, LENGTH 270 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W NUT TO ASTM A194 2H (LOCAL), DRAWING A-8322531 REV: 0 ITEM NO: 106, SPR 134 140 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    17STUD, CONTINUOUS THREAD: DIAMETER 1-5/8 IN, THREAD 8 UN-2A, LENGTH 300 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH NUTS FS; SCREW THREAD FULL; WITH 2 SEMI-FINISHED HEAVY HEXAGONAL NUTS; ASTM A194 GRADE 2H; ANSI B1.1 CLASS 2B; TEMPERED ALLOY STEEL, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    29STUD, CONTINUOUS THREAD: DIAMETER 3/4 IN, THREAD 10 UNC, LENGTH 120 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W NUT TO ASTM A194 2H, MNFR: UNKNOWN MNFR PART NO: L34M01, SPR 204/R 064 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEUNKNOWN
    42STUD, CONTINUOUS THREAD: DIAMETER 7/8 IN, LENGTH 225 MM, MATERIAL ASME SA193, MATERIAL GRADE B7, FFT:WITH 2 NUTS, MATERIAL ASME SA194 GR 2H FOR REBOILER, MNFR: FULTON MNFR PART NO: UNK, DRAWING B02-1763 REV: 00 ITEM NO: 4&5, SERIAL NO: 19062H, TAG/EQUIP NO: E-7703A/B, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEFULTON
    44STUD, CONTINUOUS THREAD: DIAMETER 7/8 IN, THREAD 9 UNC TPI, LENGTH 140 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, MNFR: AL MUHAIDIB TECHNICAL SUPPLIES. MNFR PART NO: UNK, SUPPL: ARABIAN CBI LTD SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEAL MUHAIDIB TECHNICAL SUPPLIES.
    34STUD, CONTINUOUS THREAD: DIAMETER 7/8 IN, THREAD 9 UNC, LENGTH 175 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS; MATERIAL AS ASTM A194 GR 2H; FOR AIR COMPRESSOR 2ND INTERCOOLER, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE MATERIAL-
    673STUD, CONTINUOUS THREAD: DIAMETER 7/8 IN, THREAD 9 UNC, LENGTH 210 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:COMPLETE WITH 2 NUTS TO ASTM A194 2H (LOCAL), DRAWING 28092-1 REV: 0 ITEM NO: 24, SPR 134/R 067 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    25STUD, CONTINUOUS THREAD: DIAMETER 7/8 IN, THREAD 9 UNC, LENGTH 300 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:C/W HEX NUT TO ASTM A194 2H, MNFR: SANWA IRON WORKS CO LTD MNFR PART NO: L34M01, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESANWA IRON WORKS CO LTD
    258STUD, CONTINUOUS THREAD: DIAMETER M10, THREAD 1.5 MM, LENGTH 75 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11661 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    71STUD, CONTINUOUS THREAD: DIAMETER M10, THREAD 1.5 MM, LENGTH 75 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11722 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    176STUD, CONTINUOUS THREAD: DIAMETER M10, THREAD 1.5 MM, LENGTH 95 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11662 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    44STUD, CONTINUOUS THREAD: DIAMETER M10, THREAD 1.5 MM, LENGTH 95 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11723 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    26STUD, CONTINUOUS THREAD: DIAMETER M12, THREAD 1.75 MM, LENGTH 75 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:CONSTRUCTION SPARE; FULL THREAD, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    23STUD, CONTINUOUS THREAD: DIAMETER M16, THREAD 2 MM, LENGTH 100 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 HEX NUTS; MATERIAL ASTM A194 GR2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    47STUD, CONTINUOUS THREAD: DIAMETER M16, THREAD 2 MM, LENGTH 115 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11664 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    119STUD, CONTINUOUS THREAD: DIAMETER M16, THREAD 2 MM, LENGTH 90 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:CONSTRUCTION SPARE; FULL THREAD, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    18STUD, CONTINUOUS THREAD: DIAMETER M16, THREAD 2 MM, LENGTH 95 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH (2) HEX NUT (SS ASTM A194 GR 8); FOR NOZZLE D, MNFR: AL-KHAMISAIN HARDWARE SUPPLY MNFR PART NO: UNKNOWN, SUPPL: ZAMIL STEEL INDUSTRIES SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEAL-KHAMISAIN HARDWARE SUPPLY
    85STUD, CONTINUOUS THREAD: DIAMETER M20, THREAD 2.5 MM, LENGTH 100 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8 CL2, FFT:WITH NUT (AS ASTM A194 GR 8T), CATALOGUE NO: 11651 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    67STUD, CONTINUOUS THREAD: DIAMETER M20, THREAD 2.5 MM, LENGTH 150 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUT (AS ASTMI A194 GR 2H), MNFR: AL-KHAMISAIN HARDWARE SUPPLY MNFR PART NO: UNK, SUPPL: ZAMIL SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEAL-KHAMISAIN HARDWARE SUPPLY
    109STUD, CONTINUOUS THREAD: DIAMETER M22, THREAD 2.5 MM, LENGTH 170 MM, MATERIAL AS ASTM A193M, MATERIAL GRADE B7, FFT:FULL THREADED; FOR ARV FLANGES (N9); HEAT: B7-6128, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    50STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 110 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8 CL2, FFT:WITH NUT (AS ASTM A194 GR 8T), CATALOGUE NO: 11653 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    35STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 180 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH NUT (AS ASTM A194 GR 2H), CATALOGUE NO: 11666 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    27STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:CONSTRUCTION SPARE; FULL THREAD, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    143STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 225 MM, MATERIAL AS ASTM A193, FFT:CONSTRUCTION SPARE; FULL THREAD, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    71STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 225 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH ONE HEX NUT (AS ASTM A194 GR 2H) NUT H=D, MNFR: LARSEN & TOUBRO LIMITED MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATELARSEN & TOUBRO LIMITED
    125STUD, CONTINUOUS THREAD: DIAMETER M24, THREAD 3 MM, LENGTH 380 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUT (AS ASTM A194 GR 2H) NUT H=D, MNFR: LARSEN & TOUBRO LIMITED MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATELARSEN & TOUBRO LIMITED
    18STUD, CONTINUOUS THREAD: DIAMETER M27, THREAD 3 MM, LENGTH 145 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY HEX NUT (MATERIAL: AS ASTM A194 GR 2H), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19STUD, CONTINUOUS THREAD: DIAMETER M27, THREAD 3 MM, LENGTH 160 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:CONSTRUCTION SPARE; FULL THREAD, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    47STUD, CONTINUOUS THREAD: DIAMETER M39, THREAD 3 MM, LENGTH 230 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:CONSTRUCTION SPARE, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    24STUD, CONTINUOUS THREAD: DIAMETER M39, THREAD 3 MM, LENGTH 230 MM, MATERIAL AS ASTM A193M, MATERIAL GRADE B7, FFT:WITH (2) HEX NUTS (AS ASTM A194 GR 2H); NUT H=D; FOR NOZZLE N1A-B, N2A-B, MNFR: LARSEN & TOUBRO LIMITED MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATELARSEN & TOUBRO LIMITED
    32STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD 8 UNC TPI, LENGTH 235 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEX NUTS , MATERIAL : AS ASTM A194 GR 2H, MNFR: GOGSAN FASTENER CO MNFR PART NO: FJP-7020-046, SUPPL: JMC CORPORATION SUPPL PART NO: DIC7020-046, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEGOGSAN FASTENER CO
    59STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD 8 UNC TPI, LENGTH 260 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEX NUTS , MATERIAL: AS ASTM A194 GR 2H, MNFR: GOGSAN FASTENER CO MNFR PART NO: FJP-7020-048, SUPPL: JMC CORPORATION SUPPL PART NO: DIC7020-048, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEGOGSAN FASTENER CO
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD 8 UNC, LENGTH 180 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO NUTS; MATERIAL ASTM A194; GRADE 2H ;THREAD TYPE-8 UN; FOR VESSEL; SERIAL-852; EQUIPMENT-17D003; MANUFACTURER DETTIN S.P.A -VIA PIO X 360 15 SCHIO (VI) ITALY; PHONE-00445/510033; FAX-0440445/510609, MNFR: DETTIN SPA MNFR PART NO: UNK, DRAWING 9610 REV: 0 ITEM NO: 33, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    46STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD 8 UNC, LENGTH 220 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS HEAVY HEXAGON MATERIAL CS ASTM A194-2H; TAG#TE-01R; FOR 100% ETHANE PROJECT,ETHANE PREHEATER; SPARE KOP USED, INSPECTION REQUIREMENT: EACH CONTAINER SHOULD BE LABELLED WITH PRODUCTION DATE AND EXPIRY DATE, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    48STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD 8 UNC, LENGTH 255 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEAVY HEX NUTS ASTM A194 GR 2H, MNFR: UNKNOWN MNFR PART NO: A21030/F/06200-18-19, SUPPL: SIIRTEC NIGI SPA SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEUNKNOWN
    36STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8 IN, LENGTH 215 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), MNFR DRG 06LD89-E-3014A,B,C-002 REV: 4 ITEM NO: 002, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    380STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8 TPI, LENGTH 115 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B18.2.2, FFT:WITH (2) NUTS CS ASTM A194 GR 2H, OEM: OLAYAN DESCON ENGINEERING COMPANY OEM PART NO: UNK, MNFR DRG 5189-M03-01 REV: 0 ITEM NO: 36, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEOLAYAN DESCON ENGINEERING COMPANY
    37STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8 TPI, LENGTH 160 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8 TPI, LENGTH 223 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY NUT (AS ASTM A194 GR 2H); FOR COLUMN, MNFR: DAEKYUNG TECHNOS MNFR PART NO: UNK, MNFR DRG 660-MDA120-57Q-0004-003 REV: 0 ITEM NO: 11, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDAEKYUNG TECHNOS
    20STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8 TPI, LENGTH 225 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH (2) HEX NUT- MATERIAL: SS ASTM A194 GR 8, MNFR: FUJI FILTER MFG.CO. LTD. MNFR PART NO: UNK, MNFR DRG V-F41110AB-DTL-001 REV: 2 ITEM NO: 6, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEFUJI FILTER MFG. CO., LTD.
    172STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC 8, LENGTH 165 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY NUT (AS ASTM A94 GR 2H), SUPPL: SUNGJIN GEOTEC CO LTD SUPPL PART NO: 06LD084-C3604-004#6, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    213STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1 IN, THREAD UNC, LENGTH 135 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 HEAVY HEX NUTS CS ASTM A194 GR 2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    24STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD 8 UN TPI, LENGTH 240 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (CS ASTM A194 GR 2H), MNFR: DAEKYUNG TECHNOS MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDAEKYUNG TECHNOS
    38STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD 8UN, LENGTH 520 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 HEAVY HEXAGONAL NUTS, MATERIAL AS ASTM A194 GR 2H, MNFR: YUYOUNG METAL CO. LTD. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEYUYOUNG METAL CO. LTD.
    90STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8 TPI, LENGTH 230 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8M, STANDARD ASME B1.1, FFT:WITH (2) HEAVY NUT (AS ASTM A194 GR 8M); FOR DEA SPLITTER/MEA/TEA COLUMN, MNFR: DAEKYUNG TECHNOS MNFR PART NO: UNK, MNFR DRG 660-MDA120-58Q-0005-0005 REV: 2 ITEM NO: 9, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDAEKYUNG TECHNOS
    30STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8 TPI, LENGTH 275 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH TWO HEAVY HEX NUT MATERIAL :AS ASTM A194 GR 4 ; TWO HARDENDED WASHERS, MNFR: BILFAL HEAVY INDUSTRIES LTD MNFR PART NO: 7502A20B01, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEBILFAL HEAVY INDUSTRIES LTD
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8 TPI, LENGTH 300 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, MNFR: HIRATUSKA ITOH NEJI MNFR PART NO: UNK, SUPPL: ISHIKAWAJIMA-HARIMA HEAVY IND CO LTD. ( IHI ) SUPPL PART NO: 5601027351, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEHIRATUSKA ITOH NEJI
    32STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8 TPI, LENGTH 401 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY NUT (AS ASTM A194 GR 2H); FOR COLUMN, MNFR: DAEKYUNG TECHNOS MNFR PART NO: UNK, MNFR DRG 660-MDA120-57Q-0006-003 REV: 0 ITEM NO: 10, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDAEKYUNG TECHNOS
    27STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8, LENGTH 285 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2-HEAVY HEX NUTS, MATERIAL: CS ASTM A194 GR 2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    27STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8, LENGTH 295 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH 2 HEAVY HEX NUTS CS ASTM A194 GR 4, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    36STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UN 8-2A TPI, LENGTH 320 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:FOR ADSORBER VESSELS, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    24STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/2 IN, THREAD UNC 6 TPI, LENGTH 275 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) NUT AS ASTM A194 GR 4L, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    33STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD 8 UN TPI, LENGTH 190 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH 2 HEAVY NUT DIA 1-1/4IN , MATERIAL : SS ASTM A194 GR 8, MNFR: KOREA BOLT CO. LTD. MNFR PART NO: UNK, SUPPL: DAEKYUNG TECHNOS SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKOREA BOLT CO. LTD.
    32STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD 8 UN TPI, LENGTH 215 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    21STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8 TPI, LENGTH 170 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8M, STANDARD ASME B1.1, FFT:WITH (2) HEAVY NUT (AS ASTM A194 GR 8M ); FOR DRYING COLUMN, MNFR: DAEKYUNG TECHNOS MNFR PART NO: UNK, MNFR DRG 660-MDA120-58Q-0010-0005 REV: 2 ITEM NO: 6, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEDAEKYUNG TECHNOS
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8 TPI, LENGTH 190 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H), MNFR: JEIL E & S CO. LTD MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJEIL E & S Co. Ltd
    25STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8 TPI, LENGTH 190 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H); FOR SUCTION SEPARATOR, MNFR: SHIN-IL BOLT CO. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESHIN-IL BOLT CO.
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8 TPI, LENGTH 200 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH NUT; MATERIAL:AS ASTM A194 GR 4, MNFR: KNM MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKNM
    50STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8, LENGTH 230 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, FFT:WITH 2 HEAVY HEX NUTS CS ASTM A193 GR 2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    21STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UN 8, LENGTH 235 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH 2 HEAVY HEX NUTS CS ASTM A194 GR 4, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UNC 7 TPI, LENGTH 185 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H) AND (2) WASHER; FOR MANWAY NOZZLE: M1, M2, MNFR: GULF STEEL WORKS MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEGULF STEEL WORKS
    21STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UNC 7 TPI, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH (2) HEAVY NUT (AS ASTM A194 GR 8+S2), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    51STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/4 IN, THREAD UNC 8, LENGTH 190 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO HEAVY NUTS (AS ASTM A194 GR 2H), SUPPL: SUNGJIN GEOTEC CO LTD SUPPL PART NO: 06LD084-C3003-003#6-
    31STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD 8 UN TPI, LENGTH 160 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (MATERIAL: AS ASTM A194 GR 2H; XYLAN COATED), CATALOGUE NO: 6773 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    135STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 165 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEAVY HEX NUTS, MATERIAL CS ASTM A194 GR 2H, MNFR: KOREA BOLT CO. LTD. MNFR PART NO: UNK, SUPPL: AHA M-TECH IND. CO. LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKOREA BOLT CO. LTD.
    32STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD 8 UN, LENGTH 290 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH UN HEAVY HEX NUTS, NUT MAT'L: A194 GR 2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE MATERIAL-
    67STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD 8UN TPI, LENGTH 315 MM, MATERIAL AS ASTM A 193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEX NUT, MATERIAL : AS ASTM A194 GR 2H, MNFR: GOGSAN FASTENER CO MNFR PART NO: FJP-7020-038, SUPPL: JMC CORPORATION SUPPL PART NO: DIC7020-038, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEGOGSAN FASTENER CO
    319STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8 TPI, LENGTH 225 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), SUPPL: SUNGJIN GEOTEC CO LTD SUPPL PART NO: 15, MNFR DRG 06LD89-E-3015-002 REV: 3 ITEM NO: 002, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    137STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8 TPI, LENGTH 230 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), MNFR DRG 06LD89-E-3019-002 REV: 4 ITEM NO: 14, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    50STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8 TPI, LENGTH 320 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    63STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8 TPI, LENGTH 345 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH TWO HEX NUTS; MATERIAL: AS ASTM A194 GR 2H, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, SUPPL: IL SUNG ENGINEERING CO LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    30STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8, LENGTH 185 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 HEAVY HEX NUTS ASTM A194 GR 2H-
    25STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UN 8, LENGTH 330 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), MNFR: IL SUNG ENGINEERING CO LTD. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEIL SUNG ENGINEERING CO LTD.
    360STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-1/8 IN, THREAD UNC 7 TPI, LENGTH 180 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEX NUT (AS ASTM A194 GR 2H), SUPPL: RAMSIS ENGINEERING SUPPL PART NO: UNK, SUPPL: TRIPLEFAST MIDDLE EAST LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-3/8 IN, THREAD UN 8 TPI, LENGTH 245 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (MATERIAL: AS ASTM A194 GR 2H) ; FOR STRAINER, MNFR: SUNKYOUNG METAL MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNKYOUNG METAL
    79STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-3/8 IN, THREAD UN 8 TPI, LENGTH 525 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT: WITH TWO HEX NUTS; MATERIAL: AS ASTM A194 GR 2H, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, SUPPL: IL SUNG ENGINEERING CO LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    46STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 16 MM, THREAD 2 MM, LENGTH 90 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:METRIC, MNFR: JE-II FASTENER MNFR PART NO: FN-GN-001-6, SUPPL: SEWON Q&TECH CO. LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJE-II FASTENER
    26STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-7/8 IN, THREAD UN 8, LENGTH 330 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH 2 HEAVY HEX NUTS CS ASTM A194 GR 4, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    83STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 1-7/8 IN, THREAD UN 8, LENGTH 375 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY HEX NUTS CS ASTM A194 GR 2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    27STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 20 MM, THREAD 2.5 MM, LENGTH 105 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:METRIC, MNFR: JE-II FASTENER MNFR PART NO: FN-GN-001-20, SUPPL: SEWON Q&TECH CO. LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJE-II FASTENER
    38STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 20 MM, THREAD 2.5 MM, LENGTH 110 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:METRIC, MNFR: JE-II FASTENER MNFR PART NO: FN-GN-005-20, SUPPL: SEWON Q&TECH CO. LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJE-II FASTENER
    76STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 22 MM, THREAD 2.5 MM, LENGTH 115 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:METRIC, MNFR: JE-II FASTENER MNFR PART NO: FN-GN-001-22, SUPPL: SEWON Q&TECH CO. LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJE-II FASTENER
    22STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD 10 UNC TPI, LENGTH 125 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    24STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC 10 TPI, LENGTH 110 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH NUT (AS ASTM A194 GR 2H); FOR STORAGE TANKS, MNFR: SEWON Q&TECH CO. LTD. MNFR PART NO: FN-GN-001-20, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESEWON Q&TECH CO. LTD.
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC 10 TPI, LENGTH 110 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH TWO NUTS (MATERIAL: AS ASTM A194 GR 2H) & WASHERS, MNFR: OLAYAN DESCON ENGINEERING COMPANY MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEOLAYAN DESCON ENGINEERING COMPANY
    21STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC 10 TPI, LENGTH 112 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8M CL2, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 8M); FOR AMMONIA ABSORBER, MNFR: KOREA FASTERNER CO LTD. MNFR PART NO: A17233, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKOREA FASTERNER CO LTD.
    52STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC 10 TPI, LENGTH 135 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) NUT (AS ASTM A194 GR 2H) AND FLAT WASHER; FOR SITE INSTALLATION, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC, LENGTH 120 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8 CL 2, FFT:WITH 2 HEAVY HEX NUTS ASTM A194 GR 8, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    51STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 3/4 IN, THREAD UNC, LENGTH 125 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH 2 HEAVY HEX NUTS ASTM A194 GR 4, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    45STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 30 MM, THREAD 3 MM, LENGTH 167 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, FFT: CASING BOLT WITH CAP NUT AND WASHER , MNFR: MITSUBISHI HEAVY INDUSTRIES, LTD. MNFR PART NO: 2112-17,37,57, MNFR DRG 780-14148 REV: 0 ITEM NO: 29, 30, 31, EQUIP MODEL NO: 9EL-11 MNFR: UNKNOWN, EQUIP SERIAL NO: T-1570 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEMITSUBISHI HEAVY INDUSTRIES, LTD.
    25STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 36 MM, THREAD 3 MM, LENGTH 200 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, FFT:METRIC, CASING BOLT WITH HEX NUT (P.NO: 2112-35-8C; DIA: M36; THREADS: 3MM) AND WASHER (P.NO: 2112-55-8C; DIA: M36; THREADS: 3MM), MNFR: MITSUBISHI HEAVY INDUSTRIES, LTD. MNFR PART NO: 2112-15-8C, MNFR DRG 780-14120 REV: UNK ITEM NO: 22, 23, 24, MNFR DRG 780-14130 REV: 0 ITEM NO: 22, 23, 24, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEMITSUBISHI HEAVY INDUSTRIES, LTD.
    24STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD 11 UNC TPI, LENGTH 87 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEX NUTS (CS ASTM A194 GR 2H), OEM: HANIL HEAVY INDUSTRIES CO LTD OEM PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEHANIL HEAVY INDUSTRIES CO LTD
    23STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD 11 UNC, LENGTH 70 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ANSI B1.1, FFT:WITH UN HEAVY HEX NUTS, MATL: A194 GR 2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED TO BE SUPPLIED WITH THE MATERIAL-
    43STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD 11 UNC, LENGTH 85 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H); FOR MP HOTWATER VESSEL, MNFR: SHIN-IL BOLT CO. MNFR PART NO: UNKNOWN, MNFR DRG VP-1200-220-001-V22710-003 REV: 1 ITEM NO: M01.6, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESHIN-IL BOLT CO.
    29STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD 11UNC MM, LENGTH 95 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H); FOR LP CONDENSATE VESSEL, MNFR: SHIN-IL BOLT CO. MNFR PART NO: UNKNOWN, MNFR DRG VP-1200-220-001-V22721-005 REV: 1 ITEM NO: H01. 6, TEST CERTIFICATE COMMENTS: MTC NEEDEDSHIN-IL BOLT CO.
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 100 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8M CL2, STANDARD ASME B1.1, FFT:S1; WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 8M CL2); FOR CONE ROOF TANK, MNFR: UNKNOWN MNFR PART NO: SB4, MNFR: YUYOUNG METAL CO. LTD. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEYUYOUNG METAL CO. LTD.
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 80 MM, MATERIAL SS ASTM A320, MATERIAL GRADE B8 CL2, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (MATERIAL: AS ASTM A194 GR 8; STANDARD: ANSI B18.2.2), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    20STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 85 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2; XYLAN COATED), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    28STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 85 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH (2) NUT (AS ASTM A194 GR 8), MNFR: OLAYAN DESCON ENGINEERING COMPANY MNFR PART NO: UNK, MNFR DRG 602-MFB110-58Q-0002 REV: 2 ITEM NO: 40, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEOLAYAN DESCON ENGINEERING COMPANY
    29STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 87 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B8M CL2, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 8M), MNFR: KOREA FASTERNER CO LTD. MNFR PART NO: A17232, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKOREA FASTERNER CO LTD.
    47STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 90 MM, MATERIAL SS ASTM A320, MATERIAL GRADE B8 CL2, FFT:WITH TWO HEXAGONAL NUTS, MATERIAL :SS ASTM A194 GR B8, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 95 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H), EQUIP SERIAL NO: JMC-HE-1490 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    39STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 5/8 IN, THREAD UNC 11 TPI, LENGTH 95 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 4L), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    29STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD 9 UNC TPI, LENGTH 180 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH 2 HEAVY HEX NUTS , MATERIAL : CS ASTM A194 GR 2H, MNFR: KOREA BOLT CO. LTD. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEKOREA BOLT CO. LTD.
    31STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD 9 UNC, LENGTH 125 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME SEC. VIII, DIV 1, FFT:WITH 2 NUTS MATERIAL AS ASTM A194 GR 2H, SUPPL: AMALGAMATED METAL CORPORATION PLC SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    20STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 120 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    232STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 120 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2; XYLAN COATED), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 120 MM, MATERIAL AS ASTM A320, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH NUT (AS ASTM A194 GR 8A), MNFR: THAI ROTARY ENGINEERING PUBLIC COMPANY LIMITED MNFR PART NO: UNK, MNFR DRG N1385-4-A1-109 REV: 2, MNFR DRG N1385-4-A1-1807 REV: 3, MNFR DRG N1385-4-A1-408 REV: 3, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATETHAI ROTARY ENGINEERING PUBLIC COMPANY LIMITED
    22STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 130 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8, STANDARD ASME B1.1, FFT:WITH 2 HEAVY HEXAGONAL NUTS,MATERIAL : SS ASTM A194 GR 8, MNFR: SUNGJIN GEOTEC CO LTD MNFR PART NO: 07LD20-01-N-1-015, MNFR: YUYOUNG METAL CO. LTD. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNGJIN GEOTEC CO LTD
    23STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 145 MM, MATERIAL AS ASTM A320, MATERIAL GRADE L7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 4), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    33STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 150 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2; XYLAN COATED) AND (2) FLAT WASHER (MATERIAL: CS), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    25STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 150 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) NUT (AS ASTM A194 GR 2H) AND WASHER, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    23STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 155 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B16, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (AS ASTM A194 GR 2H), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9 TPI, LENGTH 210 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, STANDARD ASME B1.1, FFT:WITH (2) HEAVY HEX NUTS (MATERIAL: AS ASTM A194 GR 2H; STANDARD: ANSI B18.2.2), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    27STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC 9, LENGTH 140 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO HEAVY NUTS (AS ASTM A194 GR 2H) , SUPPL: SUNGJIN GEOTEC CO LTD SUPPL PART NO: 06LD084-C3003-004#6, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER 7/8 IN, THREAD UNC, LENGTH 115 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 NUTS AS ASTM A194 GR 2H, INSPECTION REQUIREMENT: MATERIAL TEST CERTIFICATE IS REQUIRED-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M16, THREAD 2 MM, LENGTH 80 MM, MATERIAL AS, MATERIAL GRADE B8, FFT:C/W NUTS MATL: ALLOY STEEL GR 8; FOR LP FLARE SYSTEM-
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M20, THREAD 2.5 MM, LENGTH 160 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7M, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2H), MNFR DRG VP-E-12041-002 REV: 0 ITEM NO: 19, CATALOGUE NO: 9820 MNFR: UNKNOWN, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    55STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M20, THREAD 2.5 MM, LENGTH 190 MM, MATERIAL ASTM A193, MATERIAL GRADE B7, FFT:C/W NUTS MATL: ASTM A194 GR 2H, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    35STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M20, THREAD 2.5 MM, LENGTH 275 MM, MATERIAL ASTM A193, MATERIAL GRADE B7, FFT:C/W NUTS MATL: ASTM A194 GR 2H, MNFR: HITACHI, LTD. MNFR PART NO: UNKNOWN, DRAWING 3316 V 222-51600 REV: 0, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEHitachi Ltd
    35STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M24, THREAD 3 MM, LENGTH 230 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY HEX NUT (AS ASTM A194 GR 2HM), TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    29STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M24, THREAD 3 MM, LENGTH 235 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO HEX NUTS MATERIAL: CS ASTM A194 GR 2H , MNFR: GOGSAN FASTENER CO MNFR PART NO: UNK, SUPPL: JMC CORPORATION SUPPL PART NO: KBR7026-25, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEGOGSAN FASTENER CO
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M24, THREAD 3 MM, LENGTH 350 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO HEXAGONAL NUTS; MATERIAL CS ASTM A194 GR 2H, MNFR: CTCI MACHINERY CORPORATION. MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATECTCI MACHINERY CORPORATION.
    19STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M27, THREAD 3 MM, LENGTH 255 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUTS (AS ASTM A194 GR 2H), MNFR: MANTECH INTERNATIONAL MNFR PART NO: UNK, SUPPL: IL SUNG ENGINEERING CO LTD. SUPPL PART NO: 000047, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEMANTECH INTERNATIONAL
    17STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M27, THREAD 3 MM, LENGTH 275 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO HEXAGONAL NUTS , MATERIAL : CS ASTM A194 GR 2H, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, SUPPL: JMC CORPORATION SUPPL PART NO: KBR7028-049, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    22STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3 MM, LENGTH 360 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH TWO NUTS; MATERIAL: AS ASTM A194 GR 2H, MNFR: HANTECH LTD MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEHANTECH LTD
    35STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 285 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY HEX NUT (CS ASTM A194 GR 2H), MNFR: SUNKYOUNG METAL MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNKYOUNG METAL
    47STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 360 MM, MATERIAL SS ASTM A193, MATERIAL GRADE B8M CL2, FFT:WITH TWO HEXAGONAL NUTS, MATERIAL :SS ASTM A194 GR 8M CLASS 4, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    64STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 380 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEAVY HEX NUT (CS ASTM A194 GR 2H), MNFR: SUNKYOUNG METAL MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNKYOUNG METAL
    159STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 410 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUT (CS ASTM A194 GR 2H), MNFR: SUNKYOUNG METAL MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNKYOUNG METAL
    26STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 415 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUT (CS ASTM A194 GR 2H), MNFR: SUNKYOUNG METAL MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESUNKYOUNG METAL
    18STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M30, THREAD 3.5 MM, LENGTH 435 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH (2) HEX NUT (CS ASTM A194 GR 2H), MNFR: JFC CORPORATION-KOREA MNFR PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEJFC CORPORATION-KOREA
    83STUD, CONTINUOUS THREAD: TYPE BOLT, DIAMETER M42, THREAD 4.5 MM, LENGTH 610 MM, MATERIAL AS ASTM A193, MATERIAL GRADE B7, FFT:WITH 2 HEAVY HEX NUT , MATERIAL : AS ASTM A194 GR 2H AND 2 WASHER, MNFR: SAMSUNG METAL CO. LTD MNFR PART NO: UNK, SUPPL: IL SUNG ENGINEERING CO LTD. SUPPL PART NO: UNK, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESAMSUNG METAL CO. LTD
    23STUD, CONTINUOUS THREAD: TYPE TAP END, DIAMETER 1-1/4 IN, THREAD UNC 8 TPI, LENGTH 5.24 IN, STANDARD ASME B1.1, FFT:FOR STEAM TURBINE BFW VHP PUMP, MNFR: ELLIOTT TURBOMACHINERY LTD MNFR PART NO: P50D7313, TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEELLIOTT TURBOMACHINERY LTD
    31STUD, DOUBLE ENDED: LENGTH 62 MM, MATERIAL AS ASTM A193, GRADE B8, FFT:SUPPLIED IN SET; FOR SELF PRIMING PUMP, MNFR: YOUNG POONG PRECISION CORPORATION MNFR PART NO: PY111_EE_S,  EQUIP MODEL NO: 2K 2X1.5US-10A,  EQUIP SERIAL NO: PA2008-10-1484-003,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEYOUNG POONG PRECISION CORPORATION
    111STUD, DOUBLE ENDED: MATERIAL AS ASTM A193, GRADE B7, FFT:FOR PUMP, MNFR: FLOWSERVE PUMPS LTD MNFR PART NO: 868125,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEFLOWSERVE PUMPS LTD
    38STUD, DOUBLE ENDED: MATERIAL SS 316, , MNFR: PENBERTHY MNFR PART NO: 82021-922, MNFR: TYCO FLOW CONTROL MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATETYCO FLOW CONTROL
    32STUD, DOUBLE ENDED: TYPE CASING, DIAMETER-A M24, DIAMETER-B M24, THREAD LENGTH-A 28 MM, THREAD LENGTH-B 45 MM, THREADS-A 2 MM, THREADS-B 2 MM, LENGTH 98 MM, MATERIAL AS ASTM A193, GRADE B7, FFT:FOR CENTRIFUGAL PUMP, MNFR: ITT GOULDS PUMPS MNFR PART NO: 271774892239,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATEITT - GOULDS PUMPS
    98SUPPORT: TYPE SCREEN BAR, SIZE WD 19.4 X LG 23.4 X HT 21.7 MM, MATERIAL POLYAMINE, STANDARD UL, FFT: COLOUR: GRAY, Mnfr: PHOENIX CONTACT Mnfr Part No: AB / SS-MPHOENIX CONTACT
    28SWITCH, PUSHBUTTON: COLOR RED, HEAD STYLE FLUSH ROUND, Mnfr: TELEMECANIQUE Mnfr Part No: XB4 BA42-
    27SWITCH, PUSHBUTTON: CONTACT RATING 120VAC 60HZ, SIZE DIA 22 MM, COLOR YELLOW, HEAD STYLE ROUND, FFT: TYPE: ILLUMINATED LED; 22PH, Mnfr: KUNHUNG ELECTRIC CO. LTD. KOREA Mnfr Part No: 5229817551, Mnfr: KUNHUNG ELECTRIC CO. LTD. KOREA Mnfr Part No: KH-2204PCL-T1211,  Model/Machine No: KH-2204PCL Mnfr: KUNHUNG ELECTRIC CO. LTD. KOREAKUNHUNG ELECTRIC CO. LTD. KOREA
    21SWITCH, PUSHBUTTON: CONTACT RATING 600V 10A, CONTACT ARRANGEMENT 1NO, COLOR BLACK, HEAD STYLE FLUSH ROUND, STANDARD CSA; UL, FFT: WITH CAP, Mnfr: GE (GENERAL  ELECTRIC CO.) Mnfr Part No: CR104PBG10B1,  Suppl: POWELL ELECTRICAL MFG CO. Suppl Part No: UNKGE (GENERAL  ELECTRIC CO.)
    17SWITCH, SELECTOR: TYPE CONTROL, CONTACT ARRANGEMENT 2NO-2NC, OPERATED HANDLE, CONTACT RATING 120-600VAC; 125-250VDC, STANDARD CSA; UL, Mnfr: ELECTROSWITCH Mnfr Part No: 74202AAX, Suppl: POWELL ELECTRICAL MFG CO. Suppl P/N: UNK, MANDRG: 11017590101D02 Rev: 1 Item: 33ELECTROSWITCH
    28SWITCH, SELECTOR: TYPE STOP; AUTO; START, POSITION 3, OPERATED KNOB, SIZE WD 72 X LG 80 X HT 93 MM, CLASSIFICATION EEX EDMQ IA/IA [IA/IB] IIC T6, CONTACT RATING 690 VAC, STANDARD CSA; UL, FFT: MOUNTING: SURFACE; ENCLOSURE: IP65; TEMP. RATING: -50 TO 60DEG C; CABLE ENTRY: 1-M25 WITH ADAPTER (M25 X NPT 1/2 IN); MATERIAL:POLYESTER RESIN TYPE B-1., Mnfr: R.STAHL GMBH Mnfr Part No: UNK, MANDRG: 07CS-015-LCS(2-1-A) Rev: 0, Model/Machine No: 8040/1180, Reference No: (EX) 2-1 B-1, Tag/Equip No: LCSR.STAHL GMBH
    91SYRINGE: CAPACITY 50 MICRO L, MATERIAL GLASS, Mnfr: COLE-PARMER INSTRUMENT COMPANY Mnfr Part No: KH-07939-22, Mnfr: HAMILTON Mnfr Part No: 80901COLE-PARMER INSTRUMENT COMPANY
    19SYRINGE: TYPE GASTIGHT, CAPACITY 10 ML, GRADUATIONS 0.1 ML, FFT: LUER LOCK; 1/PK, Mnfr: HAMILTON Mnfr Part No: 81620, Mnfr: HAMILTON Mnfr Part No: 2607071, Mnfr: HAMILTON Mnfr Part No: 1010TLLHAMILTON
    26TABLE: TYPE LAGGING, FFT: APPLICATION : FOR LAYER STACKING TABLE , BELT CONV V2A , TECH POSITION 13050 , PACKAGING-1, Mnfr: BEUMER MASCHINENFABRIK GMBH Mnfr Part No: 552505BEUMER MASCHINENFABRIK GMBH
    50TEE, PIPE: CONNECTION MNPT, MATERIAL SS 316, SIZE 1/4 IN, FFT:, MNFR: PARKER HANNIFIN CORPORATION MNFR PART NO: 4-4-4 MT-SS, MNFR: SWAGELOK  MNFR PART NO: SS-4-MT,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATESWAGELOK
    30TEE, PIPE: CONNECTION SW, MATERIAL CS ASTM A105 FORGED, SIZE 1/2 IN, STANDARD ASME B16.11, ,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    20TEE, PIPE: RATING 3000 LB, CONNECTION SW, MATERIAL CS ASTM A105, SIZE 1-1/2 IN, ,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    30TEE, PIPE: RATING 3000 LB, CONNECTION SW, MATERIAL SS ASTM A182, GRADE F304/304L, SIZE 1/2 IN, FFT:SCH 80S,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE-
    17TEE, TUBE: TYPE UNION, SIZE 5/16 IN, CONNECTION COMPRESSION, MATERIAL SS 316, Mnfr: SWAGELOK Mnfr Part No: SS-500-3SWAGELOK
    28TENSIONER: TYPE PULLEY, SIZE DIA 52 MM, FFT: FOR GEARBOX, Mnfr: K-TRON INTERNATIONAL INC. Mnfr Part No: 0943-70049, Equip/Tag Model No: K2M-S100 HIGHK-TRON INTERNATIONAL INC.
    22THERMOSTAT: TYPE TEMPERATURE CONTROLLER, RANGE 5-55 DEG C, ELECTRICAL RATING 115-250VAC 5-10A; 24-60VDC, STANDARD CE; EN 55014; UL; VDE 0875, FFT: WITH SK ENCLOSURE INTERNAL, Mnfr: RITTAL GMBH & CO KG Mnfr Part No: SK3110.000, Suppl: MITSUBISHI HEAVY INDUSTRIES, LTD. Suppl P/N: UNK-
    43THROWER: TYPE LOWER BEARING, MATERIAL INSERTION RUBBER, Mnfr: PLENTY FILTERS Mnfr Part No: 790006373, MANDRG: 0796300701 Rev: 3 Item: 34PLENTY FILTERS
    19TILE: TYPE BURNER, SIZE ID 245 X OD 473 X HT 381 MM, MATERIAL AL 60 PERCENT, Mnfr: JOHN ZINK COMPANY Mnfr Part No: D-007JOHN ZINK COMPANY
    45TIP, TORCH: MATERIAL COPPER, Mnfr: KOIKE Mnfr Part No: 102-HC#1,  THE CERTIFICATE IS WITH MATERAILKOIKE
    45TIP, TORCH: MATERIAL COPPER, Mnfr: KOIKE Mnfr Part No: 102-HC#2,  THE CERTIFICATE IS REQUOERD WITH MATERAILKOIKE
    45TIP, TORCH: MATERIAL COPPER, Mnfr: KOIKE Mnfr Part No: 102-HC#3,  THE CERTIFICATE IS REQUOERD WITH MATERAILKOIKE
    45TIP, TORCH: MATERIAL COPPER, Mnfr: KOIKE Mnfr Part No: 102-HC#4,  THE CERTIFICATE IS REQUOERD WITH MATERAILKOIKE
    23TORCH: TYPE TIG, FFT: 200A, AIR COOLED, Mnfr: ASSOCIATED SPRING LTD. Mnfr Part No: WP-26V-25-2ASSOCIATED SPRING LTD, UK
    20TRANSFORMER, INSTRUMENT: TYPE CURRENT, CURRENT RATING 100/5 A, VOLTAGE RATING 600 V, CONNECTION STUD, CLASS 1, VA RATING 2.5 VA, FREQUENCY 50-400 HZ, STANDARD CSA; UL, FFT:INSULATION VOLTAGE: 600VAC; MMII OL, PHASE: 3; FOR NEMA SIZE: 3, MNFR: INSTRUMENT TRANSFORMERS INC MNFR PART NO: 3P81-101,  TEST CERTIFICATE COMMENTS: ROUTINE TRANSFORMER TEST CERITICATEINSTRUMENT TRANSFORMERS INC
    122TRAP, STEAM: TYPE THERMODYNAMIC, SIZE 3/4 IN, CONNECTION SW, PRESSURE RATING MAX 600 PSI, MATERIAL CS, FFT:MINIMUM DESING PRESSURE: 290 PSI/20BARG; MINIMUM CONDENSATE LOAD (45M): 694 KG/HR; MAXIMUM CONDENSATE LOAD(90M): 1388 KG/HR; MAXIMUM DIFFERENTIAL PRESSURE: 3 BAR, MNFR: ARMSTRONG PRODUCTS CO. MNFR PART NO: CD-72ARMSTRONG PRODUCTS CO.
    24TRAP, STEAM: TYPE VENT, SIZE 3/4 IN, CONNECTION SW 3/4, PRESSURE RATING 650 PSIG AT 800 DEG F, MATERIAL SS 316, FFT:, MNFR: ARMSTRONG PRODUCTS CO. MNFR PART NO: B222ID-3 ,  CATALOGUE NO: 16393 MNFR: UNKNOWNARMSTRONG PRODUCTS CO.
    23TROUSERS: TYPE PROTECTIVE FIRE, SIZE 48-50 C, MATERIAL ARAMID NOMEX, COLOR YELLOW, STANDARD EN 469:2005, FFT: TURNOUT BREGA BUNKER GEAR; WATER AND WINDPROOF, BREATHABLE, HIGHLY KIDNEY PROTECTION AND ELASTIC BRACES. 2 SIDE HIP POCKETS WITH FLAPS, PLENTIFUL FREEDOM MOVEMENT DUE TO WIDE SPECIAL LOW-CUT STEP SEAM, FLY WITH ZIP AND FLAP, KNEE PROTECTION IN META-AND PARA ARAMID WEAVE REINFORCEMENT WITH ADDITIONAL LAYER, ELASTIC SLEEVES AT THE TROUSER LEGS, 5 CM WIDE SILVER STRIP AND 5 CM WIDE REFLECTING YELLOW STRIPS ON THE TROUSER LEGS., Mnfr: ROSENBAUER Mnfr Part No: 114-6227,  MTC REQUIREDROSENBAUER
    17TROUSERS: TYPE PROTECTIVE FIRE, SIZE 56-58 C, MATERIAL ARAMID NOMEX, COLOR YELLOW, STANDARD EN 469:2005, FFT: TURNOUT BREGA BUNKER GEAR; WATER AND WINDPROOF, BREATHABLE, HIGHLY KIDNEY PROTECTION AND ELASTIC BRACES. 2 SIDE HIP POCKETS WITH FLAPS, PLENTIFUL FREEDOM MOVEMENT DUE TO WIDE SPECIAL LOW-CUT STEP SEAM, FLY WITH ZIP AND FLAP, KNEE PROTECTION IN META-AND PARA ARAMID WEAVE REINFORCEMENT WITH ADDITIONAL LAYER, ELASTIC SLEEVES AT THE TROUSER LEGS, 5 CM WIDE SILVER STRIP AND 5 CM WIDE REFLECTING YELLOW STRIPS ON THE TROUSER LEGS., Mnfr: ROSENBAUER Mnfr Part No: 114-165436,  MTC REQUIREDROSENBAUER
    35TUBE, BOILER STRAIGHT: SIZE OD 25.4 MM, LENGTH 5 M, WALL THICKNESS 2.11 MM, MATERIAL AS ASME SA213 GR 304, FFT:FOR HEAT EXCHANGER, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE & ASMEDOSSARY HARDWARE & GEN STORES
    18TUBE, BOILER STRAIGHT: SIZE OD 38.1 MM, LENGTH 6 M, WALL THICKNESS 2 MM, MATERIAL AS ASME SA213 GR 304, FFT:FOR HEAT EXCHANGER, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  TEST CERTIFICATE COMMENTS: MILL TEST CERTIFICATE & ASMEDOSSARY HARDWARE & GEN STORES
    36TUBE, BOILER, STRAIGHT: SIZE OD 168.3 MM, WT 7.11 AW, LENGTH 12188 MM, WALL THICKNESS SCH 40, STRUCTURE FINNED, ENDS BEVELLED, MATERIAL CS ASTM A106 GR B, FFT: TUBE SHALL BE SUPPLIED BEVELLED ENDED AS PER KBR TECHNICAL SPECIFICATION MB I4-IM AND FINNING SHALL BE IN ACCORDANCE WITH MB2 I-5F, Mnfr: L.P. S.P.A. Mnfr Part No: UNK,  MTC REQUIREDL.P. S.P.A.
    70TUBE, BOILER, STRAIGHT: SIZE OD 88.9 MM, WT 7.62 AW, LENGTH 12188 MM, WALL THICKNESS SCH 80, STRUCTURE FINNED, ENDS BEVELLED, MATERIAL CS ASME A106 GR B, FFT: TUBE SHALL BE SUPPLIED BEVELLED ENDED AS PER KBR TECHNICAL SPECIFICATION MB I4-IM AND FINNING SHALL BE IN ACCORDANCE WITH MB2 I-5F, Mnfr: L.P. S.P.A. Mnfr Part No: UNK, Mnfr Drg 210-D204 Rev: 1 Item No: CP02H, CP01J,  MTC REQUIREDL.P. S.P.A.
    24TUBE: TYPE GLAND CONDENSER, SIZE OD 19.05 X LG 1456 X THK 1.65 MM, MATERIAL AL-BRASS ASTM B 111-C68700, FFT: SUPPLIED IN 3 SETS, Mnfr: MITSUBISHI HEAVY INDUSTRIES, LTD. Mnfr Part No: 7711-11MITSUBISHI HEAVY INDUSTRIES, LTD.
    28VALVE, BALL: BODY MATERIAL CS ASTM A105, VALVE SIZE 1-1/2 IN, TRIM SPRING-CS ASTM A682 (HARMONIC STEEL); SEAT-PTFE; STEM-SS ASTM A564 GR 630; PISTON-GRAFOIL, DESIGN RATING 1500 LB, CONNECTION EXTENDED PLAIN, FACE TO FACE LENGTH 160 MM, SOFTGOODS GASKET-PTFE WITH 25 PCT GLASS; O-RING-VITON; PACKING-GRAFOIL, PORT TYPE FULL, OPERATED LEVER, STANDARD API 6D/598, FFT:TYPE: FLOATING, MNFR: OMB VALVES SPA MNFR PART NO: OMBBVSK03,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    17VALVE, BALL: VALVE SIZE 1 IN, BODY MATERIAL CS ASTM A216 GR WCB , TRIM 10, DESIGN RATING 2000 LB, CONNECTION BUTT WELD, OPERATED LEVER HANDLE, STYLE THREE PIECE, FFT: WITH 100MM LONG NIPPLES BOTH ENDS; PLAIN ENDS;  MEDIUM: WATER, OIL,GAS; FIRE TESTED, Mnfr: VIRGO VALVES & CONTROLS LTD. Mnfr Part No: UNKVIRGO VALVES & CONTROLS LTD.
    18VALVE, GATE: TYPE FLEXIBLE WEDGE, VALVE SIZE 1/2 IN, DESIGN RATING 150 LB, FACE TO FACE LENGTH 108 MM, CONNECTION FLANGED RF, BODY MATERIAL SS ASTM A182 GR 316L, TRIM SEAT-SS ASTM A479 GR TP316 HF; STEM-SS ASTM A479 GR F316; WEDGE-SS ASTM A182 GR F316, SOFTGOODS GASKET-SS ASTM A182 GR F316/316L+GRAFOIL; PACKING- GRAPHITE, STEM DESIGN OS AND Y, STYLE BOLTED EXTENSION, WELDED BONNET, OPERATED HANDWHEEL, PORT TYPE FULL, STANDARD API 598; API 602; ASME B16.34; ASME B16.5, FFT:WITH CAVITY VENT TO HIGH PRESSURE SIDE AND CORROSION INHIBITOR, MNFR: OMB VALVES SPA MNFR PART NO: OMBSK75, MNFR DRG OMBSK75 REV: 1,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    74VALVE, GATE: TYPE SOLID WEDGE, VALVE SIZE 1/2 IN, DESIGN RATING 800 LB, FACE TO FACE LENGTH 76 MM, CONNECTION SW X FNPT, BODY MATERIAL CS ASTM A350 GR LF2 CL1, TRIM SEAT RING-SS ASTM A276 GR 316/HF; STEM-SS ASTM A276 GR 316; WEDGE-SS ASTM A351 GR CF8M/HF, SOFTGOODS SPW GASKET-SS 304/304L+GRAPHITE; GLAND PACKING-FLEXIBLE GRAPHITE, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, OPERATED HANDWHEEL, STANDARD API 602; ASME B16.34; BS 5352, , MNFR: ILSHIN VALVE CO. LTD. MNFR PART NO: UNK, MNFR DRG IS8-0519-01-37 REV: 0,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEILSHIN VALVE CO. LTD.
    79VALVE, GATE: TYPE SOLID WEDGE, VALVE SIZE 1/2 IN, DESIGN RATING 800 LB, FACE TO FACE LENGTH 80 MM, CONNECTION SW X FNPT, BODY MATERIAL CS ASTM A105 GR N, TRIM STEM- SS ASTM A276 GR 410; SEAT- SS ASTM A276 GR TP410 CL2 HF; WEDGE- SS ASTM A182 GR F6A CL2, SOFTGOODS PACKING- GRAPHITE, STEM DESIGN OS AND Y, STYLE WELDED BONNET, OPERATED HANDWHEEL, PORT TYPE REDUCED, STANDARD API 598; API 602; ANSI B16.34, FFT:WITH CORROSION INHIBITOR, MNFR: OMB VALVES SPA MNFR PART NO: OMBSK52, MNFR DRG OMBSK52 REV: 1,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    17VALVE, GATE: TYPE SOLID WEDGE, VALVE SIZE 3/4 IN, DESIGN RATING 1500 LB, FACE TO FACE LENGTH 104 MM, CONNECTION SW, BODY MATERIAL SS ASTM A182 GR F304/F304L, TRIM SEAT RING-SS ASTM A276 GR 304/HF; STEM-SS ASTM A276 GR 304; WEDGE-SS ASTM A351 GR CF8/HF, SOFTGOODS GASKET-SS 304; GLAND PACKING-FLEXIBLE GRAPHITE, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, OPERATED HANDWHEEL, STANDARD API 602/598; ASME B16.34; BS 5352, , MNFR: ILSHIN VALVE CO. LTD. MNFR PART NO: UNKNOWN, MNFR DRG IS8-0519-01-50 REV: 0,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEILSHIN VALVE CO. LTD.
    26VALVE, GATE: TYPE SOLID WEDGE, VALVE SIZE 3/4 IN, DESIGN RATING 800 LB, FACE TO FACE LENGTH 90 MM, CONNECTION SW X FNPT, BODY MATERIAL CS ASTM A350 GR LF2 CL1, TRIM STEM-SS ASTM A479 GR TP316; SEAT-SS ASTM A479 GR TP316+STELLITE 6; WEDGE-SS ASTM A182 GR F316, SOFTGOODS SPW GASKET-SS 316+GRAPHITE; PACKING-GRAPHITE WITH CORROSION INHIBITOR, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, OPERATED HANDWHEEL, STANDARD API 598; API 602; ANSI B16.34, , MNFR: OMB VALVES SPA MNFR PART NO: OMBSK28-0.75IN, MNFR DRG OMBSK28 REV: 0,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    31VALVE, GATE: VALVE SIZE 1 IN, DESIGN RATING 800 LB, CONNECTION SW X NPT, BODY MATERIAL CS ASTM A105, TRIM 13 CR HF, SOFTGOODS GRAPHITE, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, OPERATED HANDWHEEL, Mnfr: BONNEY FORGE Mnfr Part No: UNK, Mnfr: KITZ CORPORATION Mnfr Part No: UNK,  TEST CERTIFICATE REQUIRED ALONG WITH THE ITEMBONNEY FORGE
    18VALVE, GATE: VALVE SIZE 1/2 IN, CONNECTION THD X FNPT 1/2 IN, BODY MATERIAL SS 316, FFT:, MNFR: SWAGELOK  MNFR PART NO: SS-120F8-NS ,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATESWAGELOK
    21VALVE, GATE: VALVE SIZE 1/2 IN, DESIGN RATING 1500 LB, CONNECTION SW X FNPT, BODY MATERIAL CS ASTM A105N, TRIM STEM: 410; SEAT: 410HF; DISC: F6HF, STYLE WELDED  BONNET, OPERATED HANDWHEEL, TEMPERATURE RATING -20.2 TO 797 DEG F, STANDARD API 602, FFT:, MNFR: OMB VALVES SPA MNFR PART NO: WP-910,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    69VALVE, GATE: VALVE SIZE 1/2 IN, DESIGN RATING 300 LB, CONNECTION FLANGED RF, BODY MATERIAL SS 316L, TRIM STEM / DISC: 316; SEAT:316HF, STEM DESIGN RISING STEM, STYLE BOLTED BONNET, OPERATED HANDWHEEL, TEMPERATURE RATING -320.8 TO 842 DEG F, STANDARD ASME B16.34/B16.10, FFT:, MNFR: OMB VALVES SPA MNFR PART NO: CR-F3-810,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    34VALVE, GATE: VALVE SIZE 1-1/2 IN, DESIGN RATING 800 LB, CONNECTION SW X THD, BODY MATERIAL CS ASTM A105, TRIM FULL STELLITE/CN 5, STEM DESIGN OS AND Y, STYLE WELDED BONNET, OPERATED HAND WHEEL, STANDARD API 602, FFT:FORGED, MNFR: LVF ITALY MNFR PART NO: PWR 107,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATELVF ITALY
    49VALVE, GATE: VALVE SIZE 1-1/2 IN, DESIGN RATING 800 LB, CONNECTION SW, BODY MATERIAL CS ASTM A105, TRIM 13 CR HF, SOFTGOODS GRAPHITE, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, STANDARD API 602, OPERATED HANDWHEEL, Mnfr: BONNEY FORGE Mnfr Part No: UNK, Mnfr: KITZ CORPORATION Mnfr Part No: UNK,  TEST CERTIFICATE REQUIRED ALONG WITH THE ITEMBONNEY FORGE
    27VALVE, GATE: VALVE SIZE 3/4 IN, DESIGN RATING 300 LB, CONNECTION FLANGED RF, BODY MATERIAL CS ASTM A105, TRIM STEM / DISC: F6; SEAT: F6 HF, STYLE WELDED BONNET, OPERATED HANDWHEEL, TEMPERATURE RATING MAX 100 DEG F, STANDARD API 602; ASME B16.5, FFT:, MNFR: OMB VALVES SPA MNFR PART NO: F3-610,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    19VALVE, GATE: VALVE SIZE 3/4 IN, DESIGN RATING 800 LB, CONNECTION SW X FNPT, BODY MATERIAL AS ASTM A182 GR F11, TRIM STEM/DISC: CR13; SEAT: CR13HF, STYLE BOLTED BONNET, OPERATED HANDWHEEL, TEMPERATURE RATING MAX 100 DEG F, STANDARD API 602, FFT:, MNFR: OMB VALVES SPA MNFR PART NO: 810-SW-NPT,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEOMB VALVES S.P.A.
    85VALVE, GATE: VALVE SIZE 3/4 IN, DESIGN RATING 800 LB, CONNECTION SW X THD, BODY MATERIAL SS 316L; FORGING: SS ASTM A182 GR F316L, TRIM SS 316/CN 10, SOFTGOODS STEM PACKING: PTFE, STEM DESIGN OS AND Y, STYLE BOLTED BONNET, OPERATED HAND WHEEL, STANDARD API 602, FFT:, MNFR: BONNEY FORGE MNFR PART NO: 081026-0001,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEBONNEY FORGE
    22VALVE, NEEDLE: BODY MATERIAL SS 316, DESIGN RATING 3000 PSI, VALVE SIZE 1/4 IN, SOFTGOODS PACKING PTFE, CONNECTION TUBE FITTING, TRIM STEM SS 316, OPERATED HANDLE/KNOB, FACE TO FACE LENGTH 57.6 MM, TEMPERATURE RATING -54 TO 232 DEG C, APPLICATION LIQUID SAMPLING SYSTEM, FFT:, MNFR: HY-LOK CORP. MNFR PART NO: NV2H-4T-R/316,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEHY-LOK CORP.
    17VALVE, NEEDLE: BODY MATERIAL SS 316, DESIGN RATING 413 BAR, VALVE SIZE 1/4 IN, CONNECTION FNPT, OPERATED HANDLE, TEMPERATURE RATING 93 DEG C, FFT:TYPE: BLOCK; WITH SCREWED BONNET AND GLAND WITH LOCKING PIN, ROTATING STEM WITH FREE SWIVEL BALL END; SEAT: INTEGRAL; STEM: SS 316, MNFR: PARKER MNFR PART NO: HNVS4FFHP,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEPARKER
    17VALVE: DESIGN RATING 0-10 BAR, BODY MATERIAL FFPM, CONNECTION THREADED PORT G 1/8 - G 1/4 IN, OPERATED AC, DC 20 MS, TEMPERATURE RATING MEDIUM -10 UP TO +90C AMBIENT -30 UP TO +60C, STANDARD IP65, FFT:FOR ANALYZER SYSTEM, VOLTAGES :24, 110, 230 V/UC, DUTY CYCLE 100% CONTINUOUSLY RATED, CYCLING RATE UP TO 1‘000 C.P.M., APPROVALS • EEX M II T4 WITH MOULDED CABLE • EEX ME II T4 WITH TERMINAL BOX, MNFR: KNF NEUBERGER MNFR PART NO: 57172,  TEST CERTIFICATE COMMENTS: PRESSURE TEST CERITIFCATE & MATERIAL TEST CERTIFICATEKNF NEUBERGER
    21VENTILATOR: SIZE DIA 450 MM, FFT: VOLTAGE RATING: 230 VAC; SUPPLIED IN SET; FOR HVAC COMPRESSOR, Mnfr: BOCK Mnfr Part No: 08837, Mnfr Drg 1.1023-14029.0 0P Rev: 0 Item No: 2100BOCK
    89WASHER, FLAT: , MNFR: LISEGA MNFR PART NO: D2312215LISEGA
    30WASHER, FLAT: FFT:, MNFR: LISEGA MNFR PART NO: D4020425LISEGA
    29WASHER, FLAT: INSIDE DIAMETER 19 MM, OUTER SIZE SQ 112 MM, THICKNESS 24 MM, PERIPHERAL SHAPE STYLE SQUARE, FFT: TYPE: PLATEDOSSARY HARDWARE & GEN STORES
    17WASHER, FLAT: INSIDE DIAMETER 34 MM, THICKNESS 12 MM, OUTER SIZE SQ 100 MM, PERIPHERAL SHAPE STYLE SQUARE, FFT:, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  CATALOGUE NO: 12172DOSSARY HARDWARE & GEN STORES
    22WASHER, FLAT: INSIDE DIAMETER 9.76 MM, OUTER SIZE 17.14 MM, THICKNESS 3.18 MM, PERIPHERAL SHAPE STYLE ROUND, Mnfr: CATERPILLAR INC Mnfr Part No: 7W4482, Suppl: SPP PUMPS LTD. Suppl P/N: UNKCATERPILLAR INC
    346WASHER, FLAT: MATERIAL SS 304, INSIDE DIAMETER 10.5 MM, OUTER SIZE 20 MM, THICKNESS 2 MM, PERIPHERAL SHAPE STYLE ROUND, Mnfr: SULZER CHEMTECH AG Mnfr Part No: 106.223.275.009, Reference No: 10005644 Mnfr: SULZER CHEMTECH AG, Tag/Equip No: 4C-1201 Mnfr: BILFAL HEAVY INDUSTRIES LTD, Equip/Tag Model No: 7489-00 Mnfr: BILFAL HEAVY INDUSTRIES LTD, Equip/Tag Serial No: 3553 Mnfr: BILFAL HEAVY INDUSTRIES LTDSULZER CHEMTECH AG
    135WASHER, FLAT: MATERIAL SS 316, INSIDE DIAMETER 17 MM, THICKNESS 3 MM, OUTER SIZE 30 MM, GRADE A4, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 000.006.160.425SULZER CHEMTECH AG
    733WASHER, FLAT: MATERIAL SS 410, INSIDE DIAMETER 11 MM, OUTER SIZE 32 MM, PERIPHERAL SHAPE STYLE ROUND, Mnfr: SULZER CHEMTECH AG Mnfr Part No: UNK, DRAWING: 82P-403-8-10-12 Rev: 0 Item: 181, SPR: 022-1 Rev: 0 Item: 027SULZER CHEMTECH AG
    149WASHER, FLAT: MATERIAL SS DIN WN 1.4307, INSIDE DIAMETER 10.5 MM, THICKNESS 2 MM, OUTER SIZE 20 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.129SULZER CHEMTECH AG
    100WASHER, FLAT: MATERIAL SS DIN WN 1.4307, INSIDE DIAMETER 11 MM, THICKNESS 3 MM, OUTER SIZE 40 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.036SULZER CHEMTECH AG
    120WASHER, FLAT: MATERIAL SS DIN WN 1.4307, INSIDE DIAMETER 17 MM, THICKNESS 3 MM, OUTER SIZE 32 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.034SULZER CHEMTECH AG
    99WASHER, FLAT: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 11 MM, THICKNESS 3 MM, OUTER SIZE 32 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.220.782.022SULZER CHEMTECH AG
    148WASHER, FLAT: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 11 MM, THICKNESS 3 MM, OUTER SIZE 40 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.028SULZER CHEMTECH AG
    148WASHER, FLAT: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 11 MM, THICKNESS 3 MM, OUTER SIZE 50 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.053SULZER CHEMTECH AG
    100WASHER, FLAT: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 14 MM, THICKNESS 3 MM, OUTER SIZE 32 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.025SULZER CHEMTECH AG
    106WASHER, FLAT: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 17 MM, THICKNESS 3 MM, OUTER SIZE 32 MM, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.026SULZER CHEMTECH AG
    177WASHER, FLAT: MATERIAL SS, GRADE 304, INSIDE DIAMETER M10, THICKNESS 2 MM, PERIPHERAL SHAPE STYLE ROUND, Mnfr: DOSSARY HARDWARE & GEN STORES Mnfr Part No: UNKDOSSARY HARDWARE & GEN STORES
    56WASHER, FLAT: MATERIAL SS, INSIDE DIAMETER 10 MM, THICKNESS 3 MM, OUTER SIZE 40 MM, PERIPHERAL SHAPE STYLE ROUND, , MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  CATALOGUE NO: 12352DOSSARY HARDWARE & GEN STORES
    82WASHER, FLAT: MATERIAL SS, INSIDE DIAMETER 11 MM, THICKNESS 2 MM, OUTER SIZE 32 MM, GRADE 304L, PERIPHERAL SHAPE STYLE ROUND, FFT:FOR 2 PASS ODD TRAYS # 1 U/ I 9, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07093-13P REV: 0,  CATALOGUE NO: 10260DOSSARY HARDWARE & GEN STORES
    2310WASHER, FLAT: MATERIAL SS, INSIDE DIAMETER 11, THICKNESS 2, OUTER SIZE 32, GRADE 410S, PERIPHERAL SHAPE STYLE ROUND, FFT:FOR 2  PASS ODD TRAYS # 11 U/ I 47, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07093-06P REV: 0,  CATALOGUE NO: 10316DOSSARY HARDWARE & GEN STORES
    25WASHER, FLAT: MATERIAL STEEL, INSIDE DIAMETER 125 MM, THICKNESS 12 MM, OUTER SIZE 185 MM, PERIPHERAL SHAPE STYLE ROUND, FFT:SPECIAL FORGED; PER 6484-I2015A,  CATALOGUE NO: 12294 MNFR: UNKNOWN-
    41WASHER, FLAT: NOMINAL SIZE 10 MM, MATERIAL SS, GRADE 316L, OUTER SIZE 25 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 800-361A010801KOCH-GLITSCH
    241WASHER, FLAT: NOMINAL SIZE 10 MM, MATERIAL SS, GRADE 316L, OUTER SIZE 25 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 800-361G010801KOCH-GLITSCH
    38WASHER, FLAT: NOMINAL SIZE 1-1/2 IN, MATERIAL CS, INSIDE DIAMETER 1-5/8 IN, OUTER SIZE 3-1/2 IN, THICKNESS 3/16 IN, PERIPHERAL SHAPE STYLE ROUND-
    27WASHER, FLAT: NOMINAL SIZE 1-1/8 IN, MATERIAL CS-
    18WASHER, FLAT: NOMINAL SIZE 5/8 IN, MATERIAL SS, GRADE 304, FFT: FOR GRINDING MILL, Mnfr: UNION PROCESS Mnfr Part No: 5W-SUNION PROCESS
    48WASHER, FLAT: NOMINAL SIZE 50 MM, MATERIAL METAL, INSIDE DIAMETER 50.5 MM, THICKNESS 20 MM, OUTER SIZE SQ 150 MM, GRADE CI, PERIPHERAL SHAPE STYLE SQUARE, FFT:FOR ANCHOR BOLT-
    23WASHER, FLAT: NOMINAL SIZE M10, MATERIAL CS ASTM A283, GRADE C, THICKNESS 2 MM, PERIPHERAL SHAPE STYLE OVAL, FFT: FOR MANWAYS OF TRAY-
    1227WASHER, FLAT: NOMINAL SIZE M10, MATERIAL SS ASTM A240, GRADE 304, INSIDE DIAMETER 11 MM, OUTER SIZE 25 MM, THICKNESS 2 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 800-304G010801KOCH-GLITSCH
    69WASHER, FLAT: NOMINAL SIZE M10, MATERIAL SS, GRADE 304, THICKNESS 2 MM-
    140WASHER, FLAT: NOMINAL SIZE M10, MATERIAL SS, INSIDE DIAMETER 10.9 MM, THICKNESS 1.45 MM, OUTER SIZE 21 MM, PERIPHERAL SHAPE STYLE ROUND, FFT:PLATED,  CATALOGUE NO: 14245-
    114WASHER, FLAT: NOMINAL SIZE M16, MATERIAL ZINC PLATED, INSIDE DIAMETER 16 MM, OUTER SIZE 31 MM, THICKNESS 3 MMDOSSARY HARDWARE & GEN STORES
    100WASHER, LOCK: MATERIAL SS DIN WN 1.4307, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 22 MM, THICKNESS 1.5 MM, TYPE SPRING, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.031SULZER CHEMTECH AG
    125WASHER, LOCK: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 10.5 MM, OUTSIDE DIAMETER 20 MM, THICKNESS 2 MM, TYPE SPRING, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.145SULZER CHEMTECH AG
    125WASHER, LOCK: MATERIAL SS DIN WN 1.4404, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 22 MM, THICKNESS 1.5 MM, TYPE SPRING, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.276.089SULZER CHEMTECH AG
    27WASHER, LOCK: MATERIAL SS, INSIDE DIAMETER 3 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 1 MM, GRADE 304, TYPE SELF LOCKING, FFT:-
    30WASHER, LOCK: MATERIAL SS, INSIDE DIAMETER 3 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 1 MM, GRADE 304, TYPE SELF LOCKING, FFT:-
    24WASHER, LOCK: NOMINAL SIZE 1/2 IN, MATERIAL CS, INSIDE DIAMETER 13.4 MM, OUTSIDE DIAMETER 24 MM, THICKNESS 2.7 MM, TYPE INTERNAL TOOTH, FFT:,  CATALOGUE NO: 11572-
    2202WASHER, LOCK: NOMINAL SIZE 10 MM, MATERIAL STEEL, INSIDE DIAMETER 10.5 MM, OUTSIDE DIAMETER 24 MM, THICKNESS 1.2 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11643-
    1471WASHER, LOCK: NOMINAL SIZE 12 MM, MATERIAL STEEL, INSIDE DIAMETER 12.5 MM, OUTSIDE DIAMETER 25 MM, THICKNESS 1.2 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11644-
    1298WASHER, LOCK: NOMINAL SIZE 16 MM, MATERIAL STEEL, INSIDE DIAMETER 16.5 MM, OUTSIDE DIAMETER 34 MM, THICKNESS 2 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11645 MNFR: UNKNOWN-
    1524WASHER, LOCK: NOMINAL SIZE 20 MM, MATERIAL STEEL, INSIDE DIAMETER 20.5 MM, OUTSIDE DIAMETER 37 MM, THICKNESS 2.5 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11646 MNFR: UNKNOWN-
    639WASHER, LOCK: NOMINAL SIZE 24 MM, MATERIAL STEEL, INSIDE DIAMETER 24.5 MM, OUTSIDE DIAMETER 60 MM, THICKNESS 2.5 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11647 MNFR: UNKNOWN-
    84WASHER, LOCK: NOMINAL SIZE 30 MM, MATERIAL STEEL, INSIDE DIAMETER 30.5 MM, OUTSIDE DIAMETER 62 MM, THICKNESS 3 MM, TYPE DISC SPRING, FFT:FOR STUD,  CATALOGUE NO: 11648-
    18WASHER, LOCK: NOMINAL SIZE 5/8 IN, MATERIAL SS, GRADE 304, FFT: FOR GRINDING MILL, Mnfr: UNION PROCESS Mnfr Part No: 5LW-SUNION PROCESS
    23WASHER, LOCK: NOMINAL SIZE M10, INSIDE DIAMETER 11.5 MM, OUTSIDE DIAMETER 21 MM, THICKNESS 2.3 MM, TYPE SPRING, FFT:,  CATALOGUE NO: 9792-
    954WASHER, LOCK: NOMINAL SIZE M12, MATERIAL CS GALV, INSIDE DIAMETER 14.5 MM, OUTSIDE DIAMETER 24 MM, THICKNESS 3 MM, TYPE SPRING, FFT:SURFACE TREATMENT:GALV, MNFR: UNKNOWN MNFR PART NO: 1910,  CATALOGUE NO: 12489UNKNOWN
    56WASHER, LOCK: NOMINAL SIZE M16, MATERIAL STEEL, INSIDE DIAMETER 15 MM, OUTSIDE DIAMETER 25 MM, THICKNESS 3 MM, TYPE SPRING, FFT:GALV-
    49WASHER, LOCK: NOMINAL SIZE M6, MATERIAL SS, INSIDE DIAMETER 6.7 MM, OUTSIDE DIAMETER 12.5 MM, THICKNESS 1.8 MM, TYPE SPRING, FFT:PLATED,  CATALOGUE NO: 14251-
    190WASHER, LOCK: NOMINAL SIZE M8, FFT: FOR CONSUMABLES - ELECTRICAL HARDWARE/MISCELL, Mnfr: ARAB ENGINEERS Mnfr Part No: 530-090, Mnfr: RS COMPONENTS LTD Mnfr Part No: UNKNOWN, CATALOGUE: RS 1999, PG 1467 Rev: UNKARAB ENGINEERS
    35WASHER, LOCK: NOMINAL SIZE M8, MATERIAL SS, INSIDE DIAMETER 8.7 MM, OUTSIDE DIAMETER 17 MM, THICKNESS 1.8 MM, TYPE SPRING, FFT:PLATED,  CATALOGUE NO: 14247-
    27WASHER, LOCK: TYPE EXTERNAL TOOTH, MATERIAL STEEL, INSIDE DIAMETER 71 MM, OUTSIDE DIAMETER 98 MM, THICKNESS 1.5 MM, Mnfr: SKF Mnfr Part No: W-14, Suppl: SKF Suppl P/N: UNKSKF
    38WASHER, LOCK: TYPE SERRATED, NOMINAL SIZE 2 IN, MATERIAL SS, OUTSIDE DIAMETER 100 MM, THICKNESS 4.5 MM, FFT: CONNECTION: NPT, Mnfr: CMP PRODUCTS Mnfr Part No: 200NPTSW4, Suppl: EGS ELECTRICAL GROUP Suppl P/N: UNKCMP PRODUCTS
    118WASHER, LOCK: TYPE SPRING, MATERIAL SS ASTM A2, GRADE 70, INSIDE DIAMETER 10.7 MM, OUTSIDE DIAMETER 18.1 MM, THICKNESS 2.2 MM, Mnfr: SULZER LTD. Mnfr Part No: 106227449001SULZER LTD.
    348WASHER, LOCK: TYPE SPRING, MATERIAL SS ASTM A2, GRADE 70, INSIDE DIAMETER 12.7 MM, OUTSIDE DIAMETER 21.1 MM, THICKNESS 2.5 MM, Mnfr: SULZER LTD. Mnfr Part No: 106227449004, Suppl: DELMON COMPANY LTD. Suppl P/N: UNKSULZER LTD.
    34WASHER, LOCK: TYPE SPRING, NOMINAL SIZE M8, MATERIAL SS, GRADE A2, INSIDE DIAMETER 8 MM, OUTSIDE DIAMETER 14 MM, THICKNESS 2 MM, STANDARD DIN 127, Mnfr: MCB Mnfr Part No: UNK, Mnfr: ZEPPELIN GMBH Mnfr Part No: 378ZEPPELIN GMBH
    20WASHER, SEALING: FFT: FOR NOZZLE FUEL SYSTEM, Mnfr: CATERPILLAR INC Mnfr Part No: 1143364, Suppl: SPP PUMPS LTD. Suppl P/N: UNKCATERPILLAR INC
    20WASHER, SEALING: MATERIAL NBR/SS 301, INSIDE DIAMETER 7.9 MM, OUTSIDE DIAMETER 13.5 MM, THICKNESS 1 MM, FFT: FOR REFRIGERATION COMPRESSOR TURBINE; FOR ACCUMULATOR (TS140-20B-20), Mnfr: MITSUBISHI HEAVY INDUSTRIES, LTD. Mnfr Part No: 20V-1751-09, Mnfr: NAKAMURA KOKI CO. LTD Mnfr Part No: UNKNOWN, DRAWING: M3-U0666 Rev: 0MITSUBISHI HEAVY INDUSTRIES, LTD.
    95WASHER: FFT: ITEM # 9B, OEM: MOLLERS. OEM Part No: 101653MOLLERS.
    25WASHER: INSIDE DIAMETER 39 MM, OUTSIDE DIAMETER 10.5 MM, THICKNESS 2 MM, TYPE DOMED, FFT:PART OF FLEXITRAY SCRUBBER NOZZLE INTERNAL-
    25WASHER: MATERIAL CS HOT GALV, INSIDE DIAMETER 17 MM, OUTSIDE DIAMETER 30 MM, THICKNESS 3 MM, FFT: FOR WATER COOLER AND HEATER, Mnfr: TRANTER HES GMBH Mnfr Part No: 1002-010TRANTER HES GMBH
    99WASHER: MATERIAL HASTELLOY DIN WIN 2.4819, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 2 MM, TYPE DOMED, , MNFR: SULZER CHEMTECH AG MNFR PART NO: 106.225.279.019SULZER CHEMTECH AG
    68WASHER: MATERIAL SS 410, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 2.0 MM, FFT: DM, THK 14G; KOP SPARE ITEM, FOR QUENCH TOWER, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-410G101, Suppl: YUSUF BIN AHMED KANOO Suppl P/N: 802-410G101KOCH-GLITSCH
    28WASHER: MATERIAL SS, GRADE 410, TYPE MANWAY, FFT:SHAPE: OVAL; FOR COLUMN, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07092-43P REV: 0,  CATALOGUE NO: 10208DOSSARY HARDWARE & GEN STORES
    590WASHER: MATERIAL SS, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 2 MM, GRADE 304L, FFT:FOR 2 PASS ODD TRAYS # 1 AND SEAL PAN BELOW TRAY # 1, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07093-03P REV: 0DOSSARY HARDWARE & GEN STORES
    11332WASHER: MATERIAL SS, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 2 MM, GRADE 410S, FFT:4 PASS ODD TRAYS # 1 U / I 99, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  CATALOGUE NO: 10083DOSSARY HARDWARE & GEN STORES
    2451WASHER: MATERIAL SS, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 2 MM, GRADE 410S, TYPE DOMED, FFT:FOR FOUR  PASS ODD TRAYS 1U/199, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07088-03P REV: 0,  CATALOGUE NO: 10106DOSSARY HARDWARE & GEN STORES
    1872WASHER: MATERIAL SS, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 45 MM, THICKNESS 3 MM, GRADE 410S, TYPE DOMED, FFT:4 PASS EVEN TRAYS 2 U/1100, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK, MNFR DRG 10-07088-14P REV: 0,  CATALOGUE NO: 10092DOSSARY HARDWARE & GEN STORES
    103WASHER: MATERIAL SS, INSIDE DIAMETER 12 MM, OUTSIDE DIAMETER 23 MM, THICKNESS 1 MM, Mnfr: PENBERTHY Mnfr Part No: 16679-022, Mnfr: TYCO FLOW CONTROL Mnfr Part No: UNKPENBERTHY
    29WASHER: MATERIAL STEEL, INSIDE DIAMETER 10.5 MM, OUTSIDE DIAMETER 39 MM, THICKNESS 2 MM, TYPE DOMED, FFT:PART OF FLEXITRAY SCRUBBER NOZZLE INTERNA, MNFR: DOSSARY HARDWARE & GEN STORES MNFR PART NO: UNK,  CATALOGUE NO: 11981DOSSARY HARDWARE & GEN STORES
    19WASHER: NOMINAL SIZE 20 MM, INSIDE DIAMETER 21.5 MM, OUTSIDE DIAMETER 37 MM, THICKNESS 3.3 MM, TYPE PLAIN, FFT:-
    88WASHER: NOMINAL SIZE 3/8 IN, MATERIAL SS, GRADE 316, TYPE CLOTH TO TRAY, FFT:, MNFR: SIEMENS WATER TECHNOLOGIES MNFR PART NO: 10088710,  EQUIP MODEL NO: 45A,  EQUIP SERIAL NO: CHI1103SIEMENS WATER TECHNOLOGIES
    1499WASHER: NOMINAL SIZE M10, Mnfr: MITSUBISHI HEAVY INDUSTRIES, LTD. Mnfr Part No: 1111-64, Drawing 790-16547/16557/16567/16577 Rev: 0, Drawing 790-16587/16597/16607 Rev: 0,  Equip Model No: 11H-6W, 11H-6B, 7H-6B, 11H-5S, 7H-7B, 11H-5S, 7H-4W,  Equip Serial No: C-781~C-787MITSUBISHI HEAVY INDUSTRIES, LTD.
    56WASHER: NOMINAL SIZE M12, MATERIAL SUPER DUPLEX SS (SDSS), INSIDE DIAMETER 12.5 MM, OUTSIDE DIAMETER 30 MM, THICKNESS 1.2 MM, FFT: FOR SUBMERGED BEARING (1); L1=27MM, L2=23MM, Mnfr: EBARA CORPORATION Mnfr Part No: 12002-ZSEBARA CORPORATION
    71WASHER: NOMINAL SIZE M16, MATERIAL SUPER DUPLEX SS (SDSS), THICKNESS 1.2, FFT: FOR SUBMERGED COUPLING, Mnfr: EBARA CORPORATION Mnfr Part No: 72601-ZSEBARA CORPORATION
    22WASHER: NOMINAL SIZE M22, MATERIAL SUPER DUPLEX SS (SDSS), INSIDE DIAMETER 23 MM, OUTSIDE DIAMETER 48 MM, THICKNESS 1.2 MM, FFT: FOR SUBMERGED BEARING, Mnfr: EBARA CORPORATION Mnfr Part No: 120-02-ZSEBARA CORPORATION
    62WASHER: NOMINAL SIZE M22, MATERIAL SUPER DUPLEX SS (SDSS), INSIDE DIAMETER 23 MM, OUTSIDE DIAMETER 48 MM, THICKNESS 1.2 MM, FFT: FOR SUBMERGED COUPLING, Mnfr: EBARA CORPORATION Mnfr Part No: 120-09-ZSEBARA CORPORATION
    98WASHER: TYPE COLUMN INTERNAL, NOMINAL SIZE 10 MM, MATERIAL SS 304, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 3 MM, FFT: DOMED SHAPE, Mnfr: SULZER LTD. Mnfr Part No: 106.225.276.032SULZER LTD.
    44WASHER: TYPE DOME, MATERIAL DUPLEX SS, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 44 MM, THICKNESS 2 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-205G102KOCH-GLITSCH
    43WASHER: TYPE DOME, MATERIAL SS, GRADE 316L, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 2 MM, FFT: FOR COLUMN INTERNAL, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-361A101KOCH-GLITSCH
    60WASHER: TYPE DOME, MATERIAL SS, GRADE 316L, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 2 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-361G101KOCH-GLITSCH
    43WASHER: TYPE DOME, MATERIAL SS, GRADE 316L, INSIDE DIAMETER 14 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 2 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-361G111KOCH-GLITSCH
    69WASHER: TYPE DOMED, NOMINAL SIZE M10, MATERIAL SS ASTM A240, GRADE 304, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 38 MM, THICKNESS 2 MM, Mnfr: KOCH-GLITSCH Mnfr Part No: 802-304G101KOCH-GLITSCH
    22WASHER: TYPE DOMED, NOMINAL SIZE M10, MATERIAL SS, GRADE 304, INSIDE DIAMETER 11 MM, OUTSIDE DIAMETER 32 MM, THICKNESS 2 MM-
    50WASHER: TYPE PLAIN, NOMINAL SIZE M24, MATERIAL HARDENED STEEL, INSIDE DIAMETER 26 MM, OUTSIDE DIAMETER 44 MM, THICKNESS 4 MM, STANDARD DIN 126, Mnfr: JANSENS & DIEPERINK B.V. Mnfr Part No: 108255, MANDRG: 96628-1_111D Rev: 0 Item: 6JANSENS & DIEPERINK B.V.
    1630WASHER: TYPE PLATE, NOMINAL SIZE 114 MM, MATERIAL AS ASTM A240, GRADE 304, Mnfr: KOCH-GLITSCH Mnfr Part No: 909-304G004KOCH-GLITSCH
    237WASHER: TYPE PLATE, NOMINAL SIZE 64 MM, MATERIAL AS ASTM A240, GRADE 304, Mnfr: KOCH-GLITSCH Mnfr Part No: 909-304G006KOCH-GLITSCH
    31WASHER: TYPE PLATE, NOMINAL SIZE 89 MM, MATERIAL AS ASTM A240, GRADE 304, Mnfr: KOCH-GLITSCH Mnfr Part No: 909-304A002KOCH-GLITSCH
    19WASHER: TYPE SPRING, FFT: FOR TEMPERATURE TRANSMITTER, Mnfr: YOKOGAWA  MIDDLE EAST EC Mnfr Part No: Y9600SUYOKOGAWA  MIDDLE EAST EC
    17WASHER: TYPE THRUST, FFT: MOTOR SIZE 160M (FLOAT LIMITING SHIM OR RESILIENT PRE- LOADING RING) FOR SIEMENS LOW VOLTAGE MOTOR SIZE 160M, BEARING TYPE 6209 REF: CIW-88-3495, Mnfr: SIEMENS AG Mnfr Part No: UNKNOWNSIEMENS AG
    17WASHER: TYPE THRUST, FFT: MOTOR SIZE 180L (FLOAT LIMITING SHIM OR RESILIENT PRE- LOADING RING) FOR SIEMENS LOW VOLTAGE MOTOR SIZE 180L; BEARING TYPE 6210 REF: CIW-88-3495, Mnfr: SIEMENS AG Mnfr Part No: UNKNOWNSIEMENS AG
    17WASHER: TYPE THRUST, FFT: MOTOR SIZE 200L (FLOAT LIMITING SHIM OR RESILIENT PRE- LOADING RING) FOR SIEMENS LOW VOLTAGE MOTOR SIZE 200L; BEARING TYPE 6212 REF: CIW-88-3495, Mnfr: SIEMENS AG Mnfr Part No: UNKNOWNSIEMENS AG
    17WASHER: TYPE THRUST, FFT: MOTOR SIZE 250M (FLOAT LIMITING SHIM OR RESILIENT PRE- LOADING RING) FOR SIEMENS LOW VOLTAGE MOTOR SIZE 250M; BEARING TYPE 6215 REF: CIW-88-3495, Mnfr: SIEMENS AG Mnfr Part No: UNKNOWNSIEMENS AG
    100WHEEL, CUTTING: TYPE METAL CUTTING, SIZE ID 16 X OD 100 X THK 3 MM, GRIT A24R7BF, SPEED 15280 RPM, Mnfr: BLACK & DECKER Mnfr Part No: A17907, Mnfr: BLACK & DECKER Mnfr Part No: A24R7BFBLACK & DECKER
    99WHEEL, GRINDING: SIZE 7 X 1/16 X 1-1/4 IN, FFT: TOOL ROOM CUT-OFF, Mnfr: MOGUK CORP Mnfr Part No: A70-T-6BJ2, Mnfr: NORTON COMPANY Mnfr Part No: 66252922672-GRA2D769-7""NORTON COMPANY
    1152WIPER: SIZE 16 X 50 X 155 MM, MATERIAL GLASS FILLED PTFE, FFT: FOR EVAPORATOR, Mnfr: KOBELCO ECO-SOLUTIONS CO. LTD Mnfr Part No: WS-GC009-07#001KOBELCO ECO-SOLUTIONS CO. LTD
    330WIPER: SIZE 16 X 50 X 180 MM, MATERIAL GLASS FILLED PTFE, FFT: FOR EVAPORATOR, Mnfr: KOBELCO ECO-SOLUTIONS CO. LTD Mnfr Part No: WS-GC009-07#002KOBELCO ECO-SOLUTIONS CO. LTD
    45WIRE, WELDING: TYPE FILLER, MATERIAL SS 309L, DIAMETER 1.6 MM, STANDARD AWS A5.9:ER 309L, FFT: SPARE FOR KOP, BRAND NAME:309S92, Mnfr: METRODE PRODUCTS LTD Mnfr Part No: ER-309L, Mnfr: HILCO Mnfr Part No: HILCHROME W309LMETRODE PRODUCTS LTD
    19WIRE, WELDING: TYPE FILLER, STYLE AWS A5.9, DIAMETER 3/32 IN, Mnfr: ALRUQEE GROUP Mnfr Part No: ER-2553,  MTCALRUQEE GROUP
    33WIRE, WELDING: TYPE TIG, STYLE AWS ER347, DIAMETER 2.4 MM, FORM ROD 5 KG, STANDARD DIN 8556, FFT: FILLER; LG: 1000MM, Mnfr: ESAB Mnfr Part No: UNK, Mnfr: BOHLER Mnfr Part No: SAS 2 IG, Mnfr: HILCO Mnfr Part No: W347ESAB
    42WIRE: TYPE BINDING, SIZE DIA 1 MM, MATERIAL SS 316, STRUCTURE SOLID-
    257GSKT:EPDM,PLATE HEAT EXCHANGER 
    124ROLLER, CONVEYOR: TYP GUIDING 
    20SUIT: TYP CHEMICAL PROTECTION,SIZE M 
    102WASHER, FLAT: SZ M24,MATL SS,GRD A2 
    500CABLE: TYP PA SPEAKER,P/N:ZA1 
    40GLOVES: SIZE 9,LENGTH 356MM,MATL NYLON 
    50RING, CIRCLIP: TYP INTERNAL,STD DIN 472 
    60GLOVES: TYP INDUSTRIAL PROTECTION 
    60GLOVES: TYP INDUSTRIAL PROTECTION 
    139KIT,SEAL:TYP LOW PROFILE END 
    43FILTER,ELEMENT:10MICRON,SS 316L 
    25GLOVES: TYP FULLY COATED LONG SLEEVE 
    21REAGENT: TYP ANALYTICAL,COLR LIGHT BROWN 
    30NUT: TYP SLOT,P/N:186567,Mnfr:FESTO 
    30SPACER:TYP RING,P/N:186563,MNFR:FESTO 
    50BOLT-MCHN:DIA M10,LG 30MM,MTRL SS 304,TH 
    28GLOVES:TYP CUT-RESISTANT,SZ L 
    70HOLDER,LAMP:TYP RECEPTACLE,MOGUL 
    18PLATE: TYPE FLOW,MATERIAL TITANIUM 
    37CIRCLIP: TYP EXTERNAL,STD UNI 7435 
    25NUT, HEX: MATL SS ASTM A194,GRD 8M 
    86WASHER,FLAT:NOM SZ 16MM,STEEL,ID 17.5MM 
    84DIODE:TYP BLOCKING 
    22WASHER: SZ M8,MATL AISI 316TI CL 70 
    267PLUG: SIZE DIA (15.6 X 13.5) X LG 40.1MM 
    51ROD, TIE: P/N:FVG271700450,Doc:DATI 
    69SPACER: P/N:SQP19322,Doc:DATI 
    36STUD,D/END:DIAMETER-A 3/4IN,DIAMETER-B 3 
    18CLAMP:TYP UNIVERSAL ONE WAY,SZ 5-19 
    20PLUG:2FT,TEST,EXTENSION 
    36BOLT,MACH:DIAMETER 10MM,LENGTH 30MM,MATL 
    90INSERT, CUTTING TOOL: TYP TURNING 
    95SLEEVE: TYP INSULATION 
    18BOLT, MACH: DIAMETER M6,LENGTH 12MM 
    203WASHER Superseded By 1018639 
    25SCREW,CAP:MT STEEL 
    35RING,CIRCLIP:INTERNAL,OD 100MM,THK 3MM 
    17SLEEVE,SHAFT:INSIDE DIAMETER 20MM,OUTSID 
    35INSULATION: TYP OVEN GLASS,FORM TAPE 
    69GSKT: SIZE WD 400 X LG 1345MM 
    20SCREEN:TYP OIL,SIZE DIA 108MM,DOC:96QD-H 
    26FILTER,ELEMENT:POLYPROPYLENE,HIGH FLOW 
    29BOLT, MACH: DIAMETER M30,LENGTH 90MM 
    30FRAME:TYP VENTILATION GRILL 
    47BASKET:TYP FILTER SUPPORT DOUBLE 
    22GSKT,SPWD:2IN,600LB,GRAPHITE,SS 304 
    300BOTTLE: TYP WIDE MOUTH,CAPACITY 1000ML 
    30STUD,D/END:DIAMETER-A 35MM,DIAMETER-B 16 
    1006NUT,HEXAGON:DIAMETER M10,MATL NICKEL PLA 
    40FILTER, AIR: SIZE SQ 592 X THK 47.5MM 
    150CABLE, POWER: CONDUCTOR SIZE 14AWG 
    23SEAL: MATL VITON,TYP SPINDLE/PLUNGER 
    500CABLE, POWER: TYP PA BEACON AND CCTV 
    500CABLE, POWER: CONDUCTOR SIZE 2.5MM2 
    500CABLE, POWER: CONDUCTOR 3 PAIR,P/N:YA3 
    250CABLE,ELECTRICAL:CONDUCTOR STRANDED COPP 
    500CABLE, POWER: CONDUCTOR (2) CORE CU 
    49FRAME:TYP SUPPORTING,SZ 2X30X180X1800MM 
    185CABLE, POWER: CONDUCTOR 1 CORE 
    17GSKT PRE-CUT : SHAP ROUND 
    500CABLE, FIBRE OPTIC: TYP DIGITAL ARMOURED 
    500CABLE, FIBRE OPTIC: TYP DIGITAL ARMOURED 
    500CABLE, FIBRE OPTIC: TYP DIGITAL ARMOURED 
    500CABLE, FIBRE OPTIC: TYP DIGITAL ARMOURED 
    500CABLE, COMMUNICATIONS: CONDUCTOR 8 PAIR 
    23PACKING,BULK:MATL AROSTAT 6204,SIZE SQ 1 
    17GSKT PRE-CUT :THK 3.2MM 
    192CROSS, TUBE: SIZE 3/8IN,CNCT COMPRESSION 
    275PLATE: TYPE FLOW,STANDARD DIN 3.1 
    30BELT, V: OUTSIDE CIRCUMFERENCE 80IN 
    29STUD CNTNS THD:TYP BOLT,DIA M36,THRD 4MM 
    63INSERT, CUTTING TOOL: TYP TURNING 
    63INSERT, CUTTING TOOL: TYP TURNING 
    43TUBE, BOILER, STRAIGHT: SIZE OD 19.05MM 
    70BOLT, MACH: DIAMETER 20MM,LENGTH 26MM 
    19STUD:DIA 42MM,LG 213MM,AS ASTM A422 
    24FILTER,AIR:WD 18 X LG 24 X THK 6IN 
    30SET: TYP DISC,P/N:SQZ21909 
    41TAPE,HEAT TRACING: 
    24INSERT,CUTTING TOOL:TYP MILLING,SIZE WD 
    324NUT, HEX: DIAMETER M16,MATL SS 304 
    39KIT, ACTUATOR REPAIR: TYP SPARE PARTS 
    49FLASK:TYP VOLUMETERIC,CAP 25ML 
    26FILTER,ELEMENT:TYP DYNALLOY,SIZE OD 2.5 
    25INSERT, CUTTING TOOL: TYP TURNING 
    25INSERT, CUTTING TOOL: TYP TURNING 
    25INSERT, CUTTING TOOL: TYP TURNING 
    35INSERT,CUTTING TOOL:TYP TURNING,SHAP TRI 
    45HOUSING: P/N:52608 
    22CAPACITOR: VOLTAGE 400-450V,TYP MOTOR 
    45RING,RETAINING:ID 80 X THK 2.5MM 
    32BOLT,MACH:DIAMETER 16MM,LENGTH 50MM,MATL 
    25O RING:INSIDE DIAMETER 74MM,WIDTH 3MM,MA 
    21RESTRICTOR: TYP FLOW,P/N:5000-1/4-250 
    91STUD CNTNS THD:TYP BOLT,DIA 1-1/2IN,THRD 
    25INSERT, CUTTING TOOL: THICKNESS 3.9MM 
    30INSERT, CUTTING TOOL: TYP SLITTING 
    25INSERT, CUTTING TOOL: TYP SLITTING 
    30RECTIFIER: TYP BRAKE,P/N:21106870 
    33SET:TYP SPRING,APPL SUCTION VALVE,P/N:SQ 
    21VALVE,NEEDLE:BODY MATL SS ASTM A182 GR F 
    46UNION, TUBE: SIZE 1/2IN,CNCT COMPRESSION 
    22PLUG, ELECTRICAL: ELEC RT 24V 16A 
    23SOCKET, ELECTRICAL: TYP COUPLER 
    540BLOCK,TERMINAL:ELEC TRT 600V 100A 
    44BLOCK, TERMINAL: ELEC RT 150V 30A,STD UL 
    55FILTER, OIL: MICRON 3,P/N:0030D003 BH4HC 
    17MAGAZINE: TYP (10) PAIR 
    33BLOCK, TERMINAL: ELEC RT 1KV 57A 
    17SPRING, COMPRESSION: COILS 7,Mnfr:SABROE 
    31STUD CNTNS THD:TYP BOLT,DIA 3/4IN,LG 130 
    1778GLAND,CABLE:SZ 12 X 21MM,MT METAL 
    37GLAND, CABLE: MATL BRASS,HUB SIZE M40 
    31WASHER: P/N:26821,Mnfr:HAVER & BOECKER 
    27SEAL:APPL MOTOR,P/N:MRBD700036,MNFR:HYOS 
    25SET: TYP HOSE,APPL DIE HEAD,Mnfr:MAAG 
    19O-RING:ID 470MM,WD 3MM,MT FKM 
    53RELAY:COIL 120VAC,CONT 250V 10A 
    27ELECTROD,WLDG:A5.4-92; E 309 L-17 
    17DISC, VALVE: MATL SS,GRD 316, Equip 
    17INSERT,CUTTING TOOL:TYP TURNING,SHAP DIA 
    30BOLT, MACH: DIAMETER M10,LENGTH 60MM 
    17BOLT, MACH: DIAMETER 1/2IN,LENGTH 2IN 
    23BOLT, MACH: DIAMETER M10,LENGTH 60MM 
    47BOLT, MACH: DIAMETER M10,LENGTH 60MM 
    20BAND:TYP GUIDE,MT PTFE/KOH 
    18FILTER, ELEMENT: MATL POLYPROPYLENE 
    18VALVE,DIAPHRAGM:VALVE SIZE 1IN,CNCT FNPT 
    22STUD CNTNS THD:TYP BOLT,DIA 64MM,THRD 3M 
    31STUD CNTNS THD:TYP BOLT,DIA 42MM,THRD 3M 
    24STUD CNTNS THD:TYP BOLT,DIA 48MM,THRD 3M 
    26STUD CNTNS THD:TYP BOLT,DIA 42MM,THRD 3M 
    18STUD CNTNS THD:TYP BOLT,DIA 80MM,THRD 3M 
    188NUT,HEX:DIA M16,SS,GR A2,DIN 934 
    18TUBE: TYP GLAND CONDENSER,Doc:764-4A608 
    17WASHER: SZ M64,MATL AS JIS G4052 
    198CONTACT:TYP MALE CRIMP,AMP 10A 
    18TUBING: TYP MOUNTING,INSIDE DIAMETER 4MM 
    25ADAPTOR, TUBE TO HOSE: TUB SZ 1.6MM 
    17PIN, COTTER SPLIT: DIAMETER 0.125IN 
    17PIN, COTTER SPLIT: DIAMETER 0.188IN 
    17PIN, COTTER SPLIT: DIAMETER 0.125IN 
    17PIN, COTTER SPLIT: DIAMETER 0.125IN 
    18PLATE:TYP DOMED SICKING,SIZE WD 27 X LG 
    28CABLE: TYP BUNDLE; HEAT EXCHANGER 
    67BOLT, MACH: DIAMETER M24,LENGTH 100MM 
    60BASE,RELAY:TYP SOCKET 
    54STUD CNTNS THD:TYP BOLT,DIA 7/8IN,THRD 9 
    23NUT,HEX:DIA M20,SS,GR A2,DIN 934 
    36WASHER, LOCK: SZ M8,MATL SS UNS S31803 
    19BOLT,MACH:DIAMETER M8,LENGTH 20MM,MATL A 
    18GSKT PRE-CUT : 
    33PACKING:V#8132,TYP SHAFT SEAL 
    28REDUCER, TUBE: SIZE 3/4 X 3/8IN 
    33BREAKER,CIRCUIT:AMPERAGE 10A,VOLTAGE 277 
    37BRKR-CRCUT:AM 20A,VLTG 120/240V AC,INTRU 
    17SPACER: MATL SS 304,P/N:B9140288-3 
    19BREAKER,CIRCUIT:10A,120/240VAC 
    49WASHER:SS 410,ID 11MM,OD 25MM,THK 2MM 
    29STUD CNTNS THD:DIA 1-7/8IN,THRD 8 UN,LG 
    23O-RING:ID 64.4MM,WD 3.1MM,MT FKM 
    200O-RING,CORD:THK 18MM,MT NEOPRENE 
    25FUSE:800A,250VAC/DC,WD 3.84 X LG 2IN 
    163FUSE: AMPERAGE 1.5A,VOLTAGE 250V 
    115FUSE: AMPERAGE 1.5A,VOLTAGE 250V 
    98FUSE:6A,DIA 10 X LG 38MM,FERRULE 
    135FUSE:5A,500VAC,DIA 6.3 X LG 32MM,FERRULE 
    45FUSE: AMPERAGE 2A,VOLTAGE 250VAC 
    100FUSE:TYP CYLINDRICAL,AMPERAGE 2A,VOLTAGE 
    35FUSE:1A,DIA 10 X LG 38MM,FERRULE 
    98FUSE: AMPERAGE 35A,VOLTAGE 250V 
    18FUSE: AMPERAGE 15A,VOLTAGE 600VAC 
    183DETECTOR,RESISTANCE TEMPERATURE:RESISTAN 
    23FUSE:1A,SURFACE MOUNT,SIGNAL 
    27FUSE: VOLTAGE 700V,CNCT FERRULE 
    17FUSE: AMPERAGE 2A,P/N:212628,Doc:8527 
    921CLAMP 
    1515CLAMP: TYP 1-WAY; UNIVERSAL,MATL SS 410S 
    68CLAMP: TYP 1-WAY; UNIVERSAL 
    238CLAMP: TYP 1-WAY; UNIVERSAL,MATL SS 410S 
    496CLAMP: TYP 1-WAY; UNIVERSAL,MATL SS 410S 
    358CLAMP: TYP 1-WAY; UNIVERSAL,MATL SS 410S 
    225STUD CNTNS THD:DIA M24,THRD 3MM,LG 320MM 
    31STUD CNTNS THD:TYP BOLT,DIA 5/8IN,THRD U 
    22KIT,SEAL:TYP END 
    65SEAL,RING:ID 50MM,OD 68MM,THK 8MM,MT NBR 
    36SEAL,LABYRINTH:ID 50 X OD 68MM,RING 
    39SPRING:ID 46 X OD 67 X THK 2.5MM,TYP CUP 
    45THERMOSTAT:TYP LINE SENSING 
    39KIT, VALVE REPAIR: TYP BODY REPLACEMENT 
    99RING:APPL SANITARY PUMP,P/N:2758002,MNFR 
    1499WASHER, FLAT: P/N:823576,Doc:MP3068 
    32PACKING: SIZE DIA 5000 X THK 210MM 
    79NUT,HEX:DIA 7/8IN,AS ASTM A194,GR 2H 
    27STUD CNTNS THD:TYP BOLT,DIA 1IN,THRD UNC 
    1240STUD CNTNS THD:TYP BOLT,DIA 1IN,THRD 8 U 
    28GSKT: TYP RF,THICKNESS 1/8IN,SHAP ROUND 
    73GSKT SET:APLC STEAM TRAP STRAINER CAP 
    39WASHER:NOM SZ M16,SS,ID 17MM,OD 30MM 
    26NUT, HEX: P/N:122.000.007.512 
    19GSKT: SIZE WD 30MM,THICKNESS 3 MM 
    299WASHER,LOCK:NOM SZ M10 
    105TERMINAL:TYP DISCONNECT 
    27DETECTOR,LEAK:TYP OZONE GAS (O3),TUBE 
    30BOLT, MACH: DIAMETER M10,LENGTH 60MM 
    30BOLT, MACH: DIAMETER M10,LENGTH 60MM 
    390ELECTRODE, WELDING: MATL LOW ALLOY 
    390ELECTRODE, WELDING: P/N:E11018-GH4R 
    20LABEL:TYP CAUTION,SZ WD 65 X LG 190MM 
    1064STUD CNTNS THD:TYP BOLT,DIA 1-1/8IN,THRD 
    2500WLDG:SIZE DIA 5 X LG 450MM,AWS CLASS A5. 
    29NIPPLE,PIPE:SZ 3/4IN,LG 4IN,SS ASTM A182 
    23TEE, PIPE: SIZE 1IN,RT 3000LB,CNCT FNPT 
    34FLANGE,PIPE:TYP RAISED FACE,SIZE 1/2IN,M 
    40FLANGE,PIPE:TYP RAISED FACE,SIZE 2IN,MAT 
    47NIPPLE,PIPE:SIZE 2IN,LENGTH 4IN,MATL SS 
    48NIPPLE,PIPE:SIZE 2IN,LENGTH 6IN,MATL SS 
    39NIPPLE,PIPE:SIZE 1/2IN,LENGTH 2IN,MATL S 
    69NIPPLE,PIPE:SIZE 1/2IN,LENGTH 4IN,MATL S 
    56NIPPLE,PIPE:SIZE 3/4IN,LENGTH 2IN,MATL S 
    117NIPPLE,PIPE:SZ 3/4IN,LG 3IN,SS ASTM A182 
    28NIPPLE,PIPE:SIZE 1IN,LENGTH 4IN,MATL SS 
    127NIPPLE,PIPE:SIZE 3/4IN,LENGTH 6IN,MATL S 
    24PIPE:SZ 3/4IN,LG 6M,SCHD 40S,SS ASTM 
    23FLANGE,PIPE:TYP RAISED FACE,SIZE 1/2IN,M 
    24FLANGE,PIPE:TYP RAISED FACE,SIZE 3/4IN,M 
    196ELBOW,PIPE TO TUBE:SIZE 1/2IN,PIPE CONNE 
    47TEE,PIPE:SIZE 1/2IN,CNCT MNPT,MATL SS 31 
    72BAR,ROUND:SIZE 1-1/4IN,LENGTH 3M,MATL SS 
    17NIPPLE,PIPE:TYP SMLS,SIZE 3/8IN,LENGTH 2 
    55TEE,PIPE:SZ 10IN,BW,CS ASTM A234,RT SCH 
    26FLANGE,PIPE:TYP RAISED FACE,SIZE 3/4IN,M 
    30FLANGE,PIPE:TYP RAISED FACE,SIZE 1-1/2IN 
    28FLANGE,PIPE:TYP RAISED FACE,SIZE 3/4IN,M 
    18FLANGE,PIPE:TYP RAISED FACE,SIZE 8IN,CNC 
    19PLUG,PIPE:SIZE 1/2IN,MATL SS,CNCT MNPT,G 
    57TEE,PIPE:SIZE 1/2IN,CNCT FNPT,MATL SS 31 
    41TEE,PIPE:SIZE 3/4IN,CNCT FNPT,MATL SS 31 
    29FLANGE,PIPE:TYP RF,SIZE 1/2IN,MATL CS AS 
    28FLANGE,PIPE:TYP RF,SIZE 12IN,CNCTN TYP W 
    22PLUG,PIPE:SIZE 3/4IN,MATL SS ASTM A276,C 
    25FLANGE,PIPE:TYP RF,SIZE 12IN,CNCTN TYP W 
    18PIPE,SPECIAL PURPOSE:MATL CS ASTM A1040, 
    19ELBOW,PIPE:SZ 8IN,CS ASTM A234,90 
    17PIPE: SIZE 1IN,LENGTH 6M,GRD B 
    30PIPE:SZ 1IN,LG 6M,CS ASTM A105,ENDS SW 
    33BAR,FLAT:SZ WD 100 X THK 6MM,LG 6000MM 
    30TEE, PIPE: SIZE DIA 2IN,RT SCH 80LB 
    28TEE,PIPE:SIZE 8IN,RT SCH 40,CNCT BW; BE, 
    26FLANGE,PIPE:SCHDL 40,TYP RF,SIZE 6IN,CNC 
    26FLANGE,PIPE:TYP RF,SIZE 10IN,CNCTN TYP W 
    18UNION PIPE,PIPE:SZ 3/4IN,CONN TBE 
    24ELBOW,PIPE TO TUBE:SIZE 10MM,PIPE CONNEC 
    18PIPE:SZ 1/2IN,LG 6M,SCHD 40,CS ASTM A106 
    22PIPE:SZ 3/4IN,LG 6M,SCHD 40,CS ASTM A106 
    21PIPE:SIZE 3IN,LENGTH 6M,SCHD 40,MATL CS 
    30BEAM:TYP IPE,SZ 180 X 91 X 5.3 X 8MM 
    19BAR,FLAT:SZ WD 50 X THK 4.5MM,LG 6000MM 
    26TEE,PIPE:SIZE 6IN,RT SCH 40,CNCT BW,MATL 
    33FLANGE,PIPE:TYP RAISED FACE,SIZE 4IN,CNC 
    20NIPPLE,PIPE:SIZE 3/8IN,LENGTH 4IN,MATL S 
    28COUPLING,PIPE 
    344ELBOW,PIPE:SZ 4IN,SS ASTM A403,90,BW 
    20ELBOW,PIPE:SIZE 1IN,CNCT SW,DEGREE 45,RT 
    18ELBOW,PIPE:SIZE 1IN,CNCT BW,DEGREE 90,RT 
    56FLANGE,PIPE:TYP RF,SIZE 3/4IN,MATL SS AS 
    50ELBOW,PIPE:SZ 6IN,PVC ASTM D2467,45 
    41FLANGE,PIPE:TYP RAISED FACE,SIZE 3/4IN,M 
    77FLANGE,PIPE:TYP BLIND RF,SIZE 1-1/2IN,MA 
    31FLANGE,PIPE:TYP BLIND RF,SIZE 3/4IN,MATL 
    103FLANGE,PIPE:TYP RF,SIZE 1-1/2IN,MATL SS 
    22ADAPTOR, PIPE: INLET SIZE 1 & 1/2IN 
    259ADAPTOR, PIPE: INLET SIZE 3/4IN 
    52FLANGE,PIPE:TYP RF,SIZE 1-1/2IN,MATL CS 
    18FLANGE,PIPE:TYP RF,SIZE 1/2IN,MATL CS AS 
    57FLANGE,PIPE:TYP RF,SIZE 3/4IN,MATL SS AS 
    28FLANGE,PIPE:TYP RAISED FACE; REDUCING,SI 
    36FLANGE,PIPE:TYP RAISED FACE,SIZE 1IN,MAT 
    26FLANGE,PIPE:TYP RAISED FACE,SIZE 1-1/4IN 
    40FLANGE,PIPE:TYP RAISED FACE,SIZE 1-1/2IN 
    71FLANGE,PIPE:TYP RAISED FACE,SIZE 2IN,CNC 
    34FLANGE,PIPE:TYP RAISED FACE,SIZE 3IN,CNC 
    17FLANGE,PIPE:TYP RAISED FACE,SIZE 1-1/2IN 
    44ELBOW,PIPE:SIZE 2IN,CNCT THD,DEGREE 90,R 
    111ELBOW,PIPE:SIZE 1/2IN,CNCT THD,DEGREE 90 
    19ELBOW, PIPE: SIZE 1IN,DEGREE 90 
    33ELBOW,PIPE:SIZE 1-1/2IN,CNCT THD,DEGREE 
    19ELBOW,PIPE:SIZE 2IN,CNCT SW,DEGREE 90,MA 
    199ELBOW,PIPE:SIZE 3/4IN,CNCT THD,DEGREE 90 
    49ELBOW,PIPE:SIZE 6IN,CNCT SW,DEGREE 90,MA 
    32ELBOW,PIPE:SIZE 6IN,CNCT SW,DEGREE 90,MA 
    19FLANGE,PIPE:TYP FLAT FACE,SIZE 1-1/2IN,M 
    18ELBOW,PIPE:SIZE 8IN,CNCT BW,DEGREE 45,MA 
    21ELBOW,PIPE:SIZE 4IN,CNCT BW,DEGREE 90,MA 
    26ELBOW, PIPE: SIZE 3IN,MATL CS ASTM A234 
    19REDUCER,PIPE:SIZE 2 X 1IN,CNCT THD,MATL 
    40STUD CNTNS THD:DIA 1/2IN,THRD UNC 13TPI 
    18STUD CNTNS THD:DIA 3/4IN,THRD UNC 10TPI 
    28FLANGE,PIPE:TYP RF,SIZE 3/4IN,MATL CS AS 
    178865TOTAL 

    Seller Terms

    • Salvex and the seller have the right to reject any and all offers.
    • This product is sold AS IS, WHERE IS.
    • Buyer is responsible for all taxes, duties, loading and freight charges.
    • Seller does not offer any warranties or manufacturer warranties.
    • Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
    • It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.

    Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Drilling Equipment sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.

    Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.

    Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.