Attention
This item is no longer available.Siemens Power Generating Equipment and Components (46 Packages)
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Complete Plants as part of a commercial repurposing strategy.
Attention
This item is no longer available.Siemens Power Generating Equipment and Components (46 Packages) Share with Buyers
-
-
Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Complete Plants as part of a commercial repurposing strategy.
| ID | : | 182989139 |
| Seller | : | |
| Seller Industry | : | |
| Current Asking Price | : | $ 6,250,000 |
| Original Wholesale Value | : | $77,792,445 |
| Quantity | : | 46 Packages |
| Manufacturer | : | |
| Condition | : | Surplus power generating equipment and components. Generator was dropped into water and is total lost. It is possible to buy a new one by Siemens. All other equipment is not used, produced in 2013 and 2014. Please see the table in product description section and photos for more details. All the items are "AS IS, WHERE IS". Buyer is responsible for shipping and handling. Seller has the right to reject all bids. |
| | : | |
| Product Location | : | |
| End Time | : | |
| Trader | Elif Aksoy +18326034782 |
Item Description
This lot of Siemens Power Generating Equipment is no longer needed for company's own operation and is being sold as an asset liquidation for its owner. The generator was dropped into water and is total lost. All other equipment is not used, produced in 2013 and 2014.
Briefly, this is a power plant on natural gas. Gas turbine burns gas and the heat is used for steam turbine. Total power is 420 mW, 50Hz.
Details are listed below:
| Description | Gross Weight (Kg) | Storage Conditions. Condition of Package and Cargo |
| CONDENSER BOX. UPPER | 55 000,000 | The cargo is stored in an unheated warehouse. The cover and internal cellophane package with dimensions of 500x350 mm are torn. |
| GAS TURBINE Unit 10 (FLANGE TO FLANGE) | 288 590,005 | The cargo is stored under a canopy. Traces of corrosion on the surface and on unprotected parts |
| Purge Water Package SGT54000F Unit 10 | 1 350,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| Fuel Oil Package SGT5-PAC- 4000F (4) Unit 10 | 19 200,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| Drainage Package UNIT 10 | 440,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| Fuel Gas Package UNIT 10 | 6 900,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| Fire Fighting System | 1 506,000 | The cargo is stored in a warehouse for dangerous goods. Traces of opening the top cover of the box. Cargo in place in good condition. |
| Unit 10 Hydraulic IGV RU1900 | 1 700,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| Unit 10 Seal Air RU1900 | 3 750,000 | The cargo is stored in an unheated warehouse. The angle of the box is damaged 150x150 mm |
| Unit 10 Counterflanges RU1900 | 2 800,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| Unit 10 Purge Water RU1900 | 800,000 | The cargo is stored in an unheated warehouse. The corner of the box from below is damaged 350?50 mm. |
| Unit 10 Fuel Oil Piping (Supports) RU1900 | 1 150,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| Unit 10 Turbine parts, Componente 71152, RU1900, 1. Power Train | 575,000 | The cargo is stored in an unheated warehouse. The top corner of the box is damaged 50x50 mm |
| Unit 10 Turbine parts, Thermo couples, RU 1900, 1. Power Train | 61,000 | The cargo is stored in an unheated warehouse. Stratification of plywood and mold traces on the entire surface of the box. |
| Unit 10 Turbine parts, Componente 71153, RU1900, 1. Power Train | 5 679,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. Stratification of plywood on the surface of the box. |
| Unit 10 SFC transformer 10MBJ01, GEAFOL, rated power 3400 KVA | 8 740,000 | The cargo is stored in a heated room. Damage to the top corner of the box with dimensions of 250x150 mm |
| Unit 10 SEE transformer 10MKC01, GEAFOL, rated power 5000 KVA | 11 710,000 | The cargo is stored in a heated room. Damage of the upper corner of the box with dimensions of 220x140 mm. |
| FLAP | 3 700,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| DRAINAGE MODULE | 1 960,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| MEASURING EQUIPMENT | 55,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| HYDRAULIC CYLINDER | 160,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| WATER- INJECT. VALVE | 615,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| THROTTLE DRAIN VALVE | 29,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| BYPASS VALVE | 6 300,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| STOP VALVE OPERATOR | 1 500,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink |
| STOP VALVE | 26,000 | The cargo is stored in an unheated warehouse. The edge of the lid of the box is damaged 150x30 mm. |
| NON-RETURN FLAP | 2 560,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| SHAFT SUPPORT | 4 080,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink |
| TURNING PEDESTAL for SteamTurbine | 4 800,000 | The cargo is stored in an unheated warehouse. Packing without damage. The humidity indicator has changed from blue to pink. |
| Turbine HP (High Pressure) Unit 10 DSPPG-0158876 | 58 400,000 | The cargo is stored under a canopy. Stratification of plywood on the package. |
| 10CJT - SEE 840/6000R - Static Excitation Equipment 6RV30603KG90-5AC4 Project: Servoskaya 10CJT | 5 546,000 | The cargo is stored in a heated room. The upper corner of the box is jammed 100x80 mm. |
| PLATFORM | 650,000 | The cargo is stored in an unheated warehouse. Porn cellophane in two places dimensions 150x50 mm. |
| BASE FRAME | 2 900,000 | The cargo is stored in an unheated warehouse. Porn cellophane in two places dimensions 150x50 mm |
| ELBOW | 11 000,000 | The cargo is stored in an unheated warehouse. Torn pouch in the sides in eight places sizes 180x120 mm |
| AIR INTAKE DUCT | 2 900,000 | The cargo is stored in an unheated warehouse. The cover is torn with dimensions of 500x1000mm. |
| CONE,SHAFT PROTECTION | 210,000 | The cargo is stored in an unheated warehouse. Cellophane is torn, dimensions are 350x20mm. Corrosion marks on the surface of the cargo at the place where the packaging is damaged. |
| FILTER HOUSE | 4 900,000 | The cargo is stored in an unheated warehouse. The case is damaged by dimensions 25x40 mm |
| Bushing | 164,000 | The cargo is stored in an unheated warehouse. The corner of the box is damaged, the dimensions are 350x80 mm. |
| 18.1.3.W.0 Gas Turbine | 65,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| 18.1.3.W.3.1 Geno Day to Day SGEN5-2000H | 167,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| LIFTING SLING Gas Turbine Unit 10 | 834,005 | The cargo is stored under a canopy. The lid is dismantled, the rope is corroded and polluted with bird litters. |
| VACUUM PUMP (Condenser) MAJ | 6 800,000 | The cargo is stored in an unheated warehouse. The humidity indicator has changed from blue to pink. |
| Turbine Section Assy | 198 600,000 | The cargo is stored in an unheated warehouse. The humidity indicator in the hermetic closure is blue. Surface corrosion over the entire outer surface of the turbine. |
| Spare Parts | 200,000 | The cargo is stored under a canopy. Partial lamination of plywood on packaging. |
| Generator Unit 10 Shop Final | 342 870,470 | Storage is carried out under a canopy. The generator is unpacked, damaged, the hatches on the body are opened, the connecting flanges are deformed, all the parts of the generator have a strong corrosion, the inner cavities of the housing are contaminated with silt. |
| CONTAINER, 40 FT (BALANCE) GVDU 402711-9 | 13 166,000 | The cargo is stored in a container. The container is located on the street near an unheated warehouse. There is no seal on the container. All the straps for fixing the load inside the container are broken. The factory box packing is not damaged. |
| No | Collo Description | Part of Plant |
| 1 | CONDENSER BOX. UPPER | Condensing system |
| 2 | REAR LOWER WATER BOX | Condensing system |
| 3 | FRONT LOWER WATER BOX.Incl.FLANGE | Condensing system |
| 4 | STEAM NECK Incl. BY-PASS STEAM&Cover | Condensing system |
| 5 | REAR UPPER WATER BOX | Condensing system |
| 6 | CONDENSER BOX LOWER | Condensing system |
| 7 | FRONT UPPER WATER BOX.Incl.FLANGE | Condensing system |
| 8 | HOTWELL | Condensing system |
| 9 | FRONT EXPANTION JOINT | Condensing system |
| 10 | REAR EXPANTION JOINT | Condensing system |
| 11 | NOZZLE R43 (Condenser) Unit 10 | Condensing system |
| 12 | Installation parts for foundation Steam Turbine | Bearings and Bearing Casings 1, 2, 3 |
| 13 | GAS TURBINE Unit 10 (FLANGE TO FLANGE) | Gas Turbine compressor rotor with casing |
| 14 | SAC Serovskaya GRES Unit 10 | GT Aux.: Seal Air Cooler |
| 15 | Hydraulic Supply Unit ST (MAX01), incl. Flushing device and Charging and Gauging Assembly (SM2370) RU1900 Unit 10 | Steam Turbine Hydraulic Skid |
| 16 | Orifice Metering System RU1900 Unit 10 | GT Aux.: Fuel gas metering |
| 17 | Purge Water Package SGT5-4000F Unit 10 | GT Aux.: Purge Water Package |
| 18 | Fuel Oil Package SGT5-PAC-4000F (4) Unit 10 | GT Aux.: Fuel Oil Skid |
| 19 | Drainage Package UNIT 10 | GT Aux.: Fuel gas skid |
| 20 | Fuel Gas Package UNIT 10 | GT Aux.: Fuel gas skid |
| 21 | Unit 10 Control Air Supply Package RU1900 | GT Aux.: Pneumatic Skid |
| 22 | Unit 10 Loop Seal Tank RU1900 1st Power Train | Generator Loop Seal Tank |
| 23 | Unit 10 Loose Components RU1900 1st Power Train | Generator Loose Components |
| 24 | Unit 10 H2 Bottle Rack RU1900 1st Power Train | Generator H2 bottle rack |
| 25 | Unit 10 Argon Supply Rack RU1900 1st Power Train | Generator Argon rack |
| 26 | Unit 10 hydraulic package Gas Turbine RU1900 Serovskaya 1st Power Train | GT Aux.: GT Hydraulic package |
| 27 | Generator Neutral Point Cubicle 10BAB11 | Generator Leads |
| 28 | Unit 10 RU1900 Rotor Turning Gear | GT Aux.: GT Turning Gear |
| 29 | Unit 10 GLAND-STEAM-CONDENSER, RU1900 POWER TRAIN | Gland Steam Condenser |
| 30 | Power Unit 10 Hydraulic Clearance Optimization Skid / RU 1900 | GT Aux.: Hydraulic Clearance Opti. HCO |
| 31 | RU1900 Power Train H2 Ventilation System | Generator Leads |
| 32 | RU1900 Power Train Neutral Point Box Accessories | Generator Leads |
| 33 | RU1900 Power Train Generator Neutral Point Box | Generator Leads |
| 34 | Lube Oil Modul L2 RU1900 Unit 10 | Steam Turbine Lube Oil Module |
| 35 | GAR3/3K Generator Current Transformers Line Side Unit 10 RU19000 Power Train | Generator Leads |
| 36 | GAR3/3K Generator Current Transformers Neutral Side Unit 10 RU19000 Power Train | Generator Leads |
| 37 | Fire Fighting System | Fire-Fighting System (CO2) |
| 38 | Fire Fighting System | Fire-Fighting System (CO2) |
| 39 | Fire Detection System Serovskaya Unit10 | Fire-Fighting System (CO2) |
| 40 | Fire Detection System Serovskaya Unit 10 | Fire-Fighting System (CO2) |
| 41 | Fire Detection System | Fire-Fighting System (CO2) |
| 42 | Fire Fighting System | Fire-Fighting System (CO2) |
| 43 | Fire Detection System | Fire-Fighting System (CO2) |
| 44 | Fire Detection System | Fire-Fighting System (CO2) |
| 45 | Fire Detection System | Fire-Fighting System (CO2) |
| 46 | Fire Detection System | Fire-Fighting System (CO2) |
| 47 | Fire Detection System | Fire-Fighting System (CO2) |
| 48 | Fire Fighting System | Fire-Fighting System (CO2) |
| 49 | Fire Fighting System | Fire-Fighting System (CO2) |
| 50 | Fire Fighting System | Fire-Fighting System (CO2) |
| 51 | Fire Fighting System | Fire-Fighting System (CO2) |
| 52 | Fire Fighting System | Fire-Fighting System (CO2) |
| 53 | Fire Fighting System | Fire-Fighting System (CO2) |
| 54 | Unit 10 CBO / Control Air RU1900 | GT Aux.: Interconnecting piping |
| 55 | Unit 10 Turbine Drain System RU1900 | GT Aux.: Interconnecting piping |
| 56 | Unit 10 Hydraulic IGV RU1900 | GT Aux.: Interconnecting piping |
| 57 | Unit 10 Pressure Measuring Piping + Surge Protection RU1900 | GT Aux.: Interconnecting piping |
| 58 | Unit 10 Seal Air RU1900 | GT Aux.: Interconnecting piping |
| 59 | Unit 10 Counterflanges RU1900 | GT Aux.: Interconnecting piping |
| 60 | Unit 10 Purge Water RU1900 | GT Aux.: Interconnecting piping |
| 61 | Unit 10 Fuel Gas Drain Piping RU1900 | GT Aux.: Interconnecting piping |
| 62 | Unit 10 Fuel Oil Piping (Pipes) RU1900 | GT Aux.: Interconnecting piping |
| 63 | Unit 10 ACCS RU1900 | GT Aux.: Interconnecting piping |
| 64 | Unit 10 Fuel Oil Piping (Supports) RU1900 | GT Aux.: Interconnecting piping |
| 65 | Unit 10 Fuel Gas RU1900 | GT Aux.: Interconnecting piping |
| 66 | Unit 10 RU1900 Oil Mist Separator Typ FF2-099.360015 | Generator Oil Mist Eliminator |
| 67 | RU1900 Power Train Dangerous Goods GENERATOR IPBD | Generator Leads |
| 68 | Unit 10 Turbine parts, Componente 71152, RU1900, 1. Power Train | GT Aux.: Combustion Chamber rack |
| 69 | Unit 10 Turbine parts, Thermo couples, RU 1900, 1. Power Train | GT Aux.: Combustion Chamber rack |
| 70 | Unit 10 Turbine parts, Hydraulic, RU1900, 1. Power Train | GT Aux.: Combustion Chamber rack |
| 71 | Unit 10 Turbine parts, Componente 71153, RU1900, 1. Power Train | GT Aux.: Combustion Chamber rack |
| 72 | Unit 10 Turbine parts, Componente 87040, RU1900, 1. Power Train | GT Aux.: Combustion Chamber rack |
| 73 | GT Expansion joint Unit 10 | Exhaust gas system |
| 74 | DIFFUSOR PARTS Unit 10 | Exhaust gas system |
| 75 | Diffuser Parts Unit 10 | Exhaust gas system |
| 76 | Diffuser Parts Unit 10 | Exhaust gas system |
| 77 | Diffuser Parts Unit 10 | Exhaust gas system |
| 78 | Diffuser Parts Unit 10 | Exhaust gas system |
| 79 | Diffuser Parts Unit 10 | Exhaust gas system |
| 80 | Diffuser Parts Unit 10 | Exhaust gas system |
| 81 | DIFFUSOR PARTS Unit 10 | Exhaust gas system |
| 82 | DIFFUSOR PARTS Unit 10 | Exhaust gas system |
| 83 | Paint materials Kl.3 - UN1263 + UN1307 | Exhaust gas system |
| 84 | Paint materials Kl. 3 - UN 1263 + UN 1307 | Exhaust gas system |
| 85 | Paint materials Kl. 3 UN 1263 | Exhaust gas system |
| 86 | Paint materials Kl. 3 UN 1263 | Exhaust gas system |
| 87 | Serovskaya Unit 10 Housing for transformer 10MKC01, 5000 KVA | Low voltage Transformer |
| 88 | Serovskaya Unit 10 SFC transformer 10MBJ01, GEAFOL, rated power 3400 KVA | Low voltage Transformer |
| 89 | Serovskaya Unit 10 Housing for transformer 10MBJ01 3400 KVA | Low voltage Transformer |
| 90 | Serovskaya Unit 10 SEE transformer 10MKC01, GEAFOL, rated power 5000 KVA | Low voltage Transformer |
| 91 | Standstill Air Dryer ML690 & M120 + accessories according to parts list no. PSK027N601, Unit 10 | Steam Turbine Air Dryers |
| 92 | ACCS Advanced Compressor Cleaning System for Gas Turbine SGT5-4000F RU1900 | GT Aux.: ACCS |
| 93 | HOT REHEAT BYPASS STEAM INLET 1 | IP and LP Bypass Modules and Equipment |
| 94 | FLAP | Valves for Steam turbine |
| 95 | DRAINAGE-MODULE | Drain Tank |
| 96 | STEAM-STRAIN.CASING | LP Steam Strainer |
| 97 | BYPASS VALVE | IP and LP Bypass Modules and Equipment |
| 98 | MEASURING EQUIPMENT | Turbine H-Type |
| 99 | HYDRAULIC SET | Turbine H-Type |
| 100 | VACUUM BREAKER | Turbine H-Type |
| 101 | BLOW-OUT DEVICE | Valves for Steam turbine |
| 102 | BLOW-OUT DEVICE | IP and LP Bypass Modules and Equipment |
| 103 | VALVE | Valves for Steam turbine |
| 104 | VALVE Unit 10 | Valves for Steam turbine |
| 105 | HYDRAULIC CYLINDER | Turbine E-Type |
| 106 | WATER-INJECT. VALVE | IP and LP Bypass Modules and Equipment |
| 107 | VALVE WITH ACTUATOR | Valves for Steam turbine |
| 108 | VALVE WITH ACTUATOR | Valves for Steam turbine |
| 109 | SOLENOID VALVE | Valves for Steam turbine |
| 110 | CHEESE HEAD SCREW | Turbine H-Type |
| 111 | WRENCH | Turbine E-Type |
| 112 | VALVE | Valves for Steam turbine |
| 113 | THROTTLE DRAIN VALVE | Valves for Steam turbine |
| 114 | SUPPORT BRACKET | Turbine E-Type |
| 115 | BYPASS VALVE | IP and LP Bypass Modules and Equipment |
| 116 | STOP VALVE OPERATOR | Valves for Steam turbine |
| 117 | MOUNTING BRACKET | Valves for Steam turbine |
| 118 | STOP VALVE OPERATOR | Valves for Steam turbine |
| 119 | MOUNTING PIPE | Valves for Steam turbine |
| 120 | CABLE | Turbine E-Type |
| 121 | PIPE | Valves for Steam turbine |
| 122 | STOP VALVE | Valves for Steam turbine |
| 123 | SIGN | Turbine H-Type |
| 124 | MOUNTING BRACKET | IP and LP Bypass Modules and Equipment |
| 125 | UNION | Valves for Steam turbine |
| 126 | RUPTURE DIAPHRAGM ASSEMBLY | Turbine E-Type |
| 127 | BLOW-OUT DEVICE | Valves for Steam turbine |
| 128 | SUPPLY STEAM BYPASS STEAM INLET 1 | IP and LP Bypass Modules and Equipment |
| 129 | LIFTING SLING Turbine Unit 10 Wire Ropes | Turbine E-Type |
| 130 | FLAP WITH DRIVE | Valves for Steam turbine |
| 131 | SLUGGING RING WRENCH | Turbine H-Type |
| 132 | LIFTING SLINGs for Turbines | Turbine E-Type |
| 133 | NON-RETURN FLAP | Valves for Steam turbine |
| 134 | LIFTING SLINGs for Main Steam Valve | Turbine H-Type |
| 135 | LIFTING SLING for Reheat Valve | Turbine E-Type |
| 136 | Coupling | SSS Clutch |
| 137 | Mounting Device Steam Turbine HP | Valves for Steam turbine |
| 138 | FLANGE | Valves for Steam turbine |
| 139 | FLANGE | Valves for Steam turbine |
| 140 | PIPE WRENCH | Valves for Steam turbine |
| 141 | CHAIN | Turbine E-Type |
| 142 | SEAL STEAM VALVE | Seal Steam Supply and Seal Leakoff Valve |
| 143 | TURNING PEDESTAL for SteamTurbine | Turbine H-Type |
| 144 | CASING SUPPORT | Turbine H-Type |
| 145 | Assembly Slide Material | Turbine H-Type |
| 146 | OIL THROTTLE | Vacuum Pumps |
| 147 | Pipe | Valves for Steam turbine |
| 148 | Assambly equipment | Valves for Steam turbine |
| 149 | Balancing Material | Turbine H-Type |
| 150 | MOUNTING FRAME FOR BEARING SHEL AU DER LA | Bearings and Bearing Casings 1, 2, 3 |
| 151 | SHAFT SUPPORT | Turbine E-Type |
| 152 | TURNING PEDESTAL for SteamTurbine | Turbine H-Type |
| 153 | BASE PLATE Unit 10 | Turbine H-Type |
| 154 | Turbine HP (High Pressure) Unit 10 DSPPG-0158876 | Turbine H-Type |
| 155 | Accessories pack assembly for Unit 10 | Power Control Center, PPC |
| 156 | Power Control Centre 10UBA65 | Power Control Center, PPC |
| 157 | Power Control Centre 10UBA63 | Power Control Center, PPC |
| 158 | Air conditioner _HPW-WM15MO_15kW | Power Control Center, PPC |
| 159 | Power Control Centre 10UBA61 | Power Control Center, PPC |
| 160 | Project: Serovskaya 10CJT Twin fan for the first, second and third power section (excitation) - SEE | SEE/SFC |
| 161 | 10CJT SFC 5,0 MW - Startup Frequency Converter 6SL3850-3UM11-4PA0-Z (A5E03681505) Project: Serovskaya 10CJT | SEE/SFC |
| 162 | Project: Serovskaya 10CJT Fans for the SFC Include: 3 piece fans 2CF4564-1NA81-0FJ4 | SEE/SFC |
| 163 | 10CJT - SEE 840/6000R - Static Excitation Equipment 6RV3060-3KG90-5AC4 Project: Servoskaya 10CJT | SEE/SFC |
| 164 | Seal oil Skid Unit 10 | Generator Seal Oil Skid |
| 165 | Bearing casing arrangement 11 | Bearings and Bearing Casings 1, 2, 3 |
| 166 | Arrangement of measurnig transmitters 16 | Bearings and Bearing Casings 1, 2, 3 |
| 167 | Manually-operated turning gear | Bearings and Bearing Casings 1, 2, 3 |
| 168 | 0104 Arrangement of measuring transmitters 11 | Bearings and Bearing Casings 1, 2, 3 |
| 169 | Equipment for oil flush + pressure test | Bearings and Bearing Casings 1, 2, 3 |
| 170 | Bearing casing arrangement 16 | Bearings and Bearing Casings 1, 2, 3 |
| 171 | Manually-operated turning gear | Bearings and Bearing Casings 1, 2, 3 |
| 172 | Bearing pedestal 11 | Bearings and Bearing Casings 1, 2, 3 |
| 173 | Bearing pedestal 16 Unit 10 | Bearings and Bearing Casings 1, 2, 3 |
| 174 | Base plates | Bearings and Bearing Casings 1, 2, 3 |
| 175 | Base plate + anchor plates | Bearings and Bearing Casings 1, 2, 3 |
| 176 | Arrangement of bearing casing+base plate | Bearings and Bearing Casings 1, 2, 3 |
| 177 | Ethafoam rings | Bearings and Bearing Casings 1, 2, 3 |
| 178 | ELBOW | Air Intake System |
| 179 | AIR INTAKE DUCT | Air Intake System |
| 180 | CASE WITH SMALL PARTS | Air Intake System |
| 181 | AIR INTAKE DUCT | Air Intake System |
| 182 | AIR INTAKE DUCT | Air Intake System |
| 183 | CONE,SHAFT PROTECTION | Air Intake System |
| 184 | CASE WITH SMALL PARTS | Air Intake System |
| 185 | PLATFORM | Air Intake System |
| 186 | BASE FRAME | Air Intake System |
| 187 | BASE FRAME | Air Intake System |
| 188 | AIR INTAKE DUCT | Air Intake System |
| 189 | AIR INTAKE DUCT | Air Intake System |
| 190 | ELBOW | Air Intake System |
| 191 | ELBOW | Air Intake System |
| 192 | PLATFORM | Air Intake System |
| 193 | PLATFORM | Air Intake System |
| 194 | PLATFORM | Air Intake System |
| 195 | CASE WITH SMALL PARTS | Air Intake System |
| 196 | PLATFORM | Air Intake System |
| 197 | PLATFORM | Air Intake System |
| 198 | PLATFORM | Air Intake System |
| 199 | ELBOW | Air Intake System |
| 200 | ELBOW | Air Intake System |
| 201 | ELBOW | Air Intake System |
| 202 | PLATFORM | Air Intake System |
| 203 | BASE FRAME | Air Intake System |
| 204 | BASE FRAME | Air Intake System |
| 205 | BASE FRAME | Air Intake System |
| 206 | BASE FRAME | Air Intake System |
| 207 | BASE FRAME | Air Intake System |
| 208 | CASE WITH SMALL PARTS | Air Intake System |
| 209 | AIR INTAKE DUCT | Air Intake System |
| 210 | ELBOW | Air Intake System |
| 211 | ELBOW | Air Intake System |
| 212 | BASE FRAME | Air Intake System |
| 213 | BASE FRAME | Air Intake System |
| 214 | WEATHER HOODS | Air Intake System |
| 215 | PLATFORM | Air Intake System |
| 216 | FILTER HOUSE | Air Intake System |
| 217 | WEATHER HOODS | Air Intake System |
| 218 | WEATHER HOODS | Air Intake System |
| 219 | WEATHER HOODS | Air Intake System |
| 220 | WEATHER HOODS | Air Intake System |
| 221 | WEATHER HOODS | Air Intake System |
| 222 | WEATHER HOODS | Air Intake System |
| 223 | WEATHER HOODS | Air Intake System |
| 224 | WEATHER HOODS | Air Intake System |
| 225 | CASE WITH SMALL PARTS | Air Intake System |
| 226 | WEATHER HOODS | Air Intake System |
| 227 | WEATHER HOODS | Air Intake System |
| 228 | WEATHER HOODS | Air Intake System |
| 229 | FILTER HOUSE | Air Intake System |
| 230 | FILTER HOUSE | Air Intake System |
| 231 | CASE WITH SMALL PARTS | Air Intake System |
| 232 | FILTER HOUSE | Air Intake System |
| 233 | FILTER HOUSE | Air Intake System |
| 234 | FILTER HOUSE | Air Intake System |
| 235 | FILTER HOUSE | Air Intake System |
| 236 | PLATFORM | Air Intake System |
| 237 | PLATFORM | Air Intake System |
| 238 | AIR INTAKE DUCT Unit 10 | Air Intake System |
| 239 | AIR INTAKE DUCT | Air Intake System |
| 240 | FILTER HOUSE | Air Intake System |
| 241 | AIR INTAKE DUCT | Air Intake System |
| 242 | AIR INTAKE DUCT | Air Intake System |
| 243 | AIR INTAKE DUCT | Air Intake System |
| 244 | CONE,SHAFT PROTECTION | Air Intake System |
| 245 | AIR INTAKE DUCT | Air Intake System |
| 246 | CONE,SHAFT PROTECTION | Air Intake System |
| 247 | CONE,SHAFT PROTECTION | Air Intake System |
| 248 | PLATFORM | Air Intake System |
| 249 | CONE,SHAFT PROTECTION | Air Intake System |
| 250 | PLATFORM | Air Intake System |
| 251 | PLATFORM | Air Intake System |
| 252 | BASE FRAME | Air Intake System |
| 253 | BASE FRAME | Air Intake System |
| 254 | CONE,SHAFT PROTECTION | Air Intake System |
| 255 | PLATFORM | Air Intake System |
| 256 | PLATFORM | Air Intake System |
| 257 | PLATFORM | Air Intake System |
| 258 | PLATFORM | Air Intake System |
| 259 | PLATFORM | Air Intake System |
| 260 | PLATFORM | Air Intake System |
| 261 | ELBOW | Air Intake System |
| 262 | BASE FRAME | Air Intake System |
| 263 | BASE FRAME | Air Intake System |
| 264 | BASE FRAME | Air Intake System |
| 265 | BASE FRAME | Air Intake System |
| 266 | FILTER HOUSE | Air Intake System |
| 267 | FILTER HOUSE | Air Intake System |
| 268 | FILTER HOUSE | Air Intake System |
| 269 | AIR INTAKE DUCT | Air Intake System |
| 270 | FILTER HOUSE | Air Intake System |
| 271 | FILTER HOUSE | Air Intake System |
| 272 | FILTER HOUSE | Air Intake System |
| 273 | FILTER HOUSE | Air Intake System |
| 274 | FILTER HOUSE | Air Intake System |
| 275 | FILTER HOUSE | Air Intake System |
| 276 | FILTER HOUSE | Air Intake System |
| 277 | FILTER HOUSE | Air Intake System |
| 278 | Additional lifting lugs | Air Intake System |
| 279 | Standstill Air Dryer MLT800 incl. 20m Hose, 2 Stk. Filter F5 und 10m Hose FFsuper | GT Aux.: Air Dryer |
| 280 | Container zu Package 1 | Air Intake System |
| 281 | Container zu Package 2 | Air Intake System |
| 282 | Flap | Air Intake System |
| 283 | Switch box and equipment | Air Intake System |
| 284 | Für Air Intake System - Piping | Air Intake System |
| 285 | Control Cabinet Unit 10 | Air Intake System |
| 286 | Equipment for Control Cabinet Unit 10 | Air Intake System |
| 287 | Fixation Unit 10 | Air Intake System |
| 288 | Wire Mesh Unit 10 | Air Intake System |
| 289 | Wire Mesh Unit 10 | Air Intake System |
| 290 | Support Frame Unit 10 | Air Intake System |
| 291 | Frame Insect Screen Unit 10 | Air Intake System |
| 292 | Frame Insect Screen Unit 10 | Air Intake System |
| 293 | Fixation Unit 10 | Air Intake System |
| 294 | Bolts, washers, nuts | Air Intake System |
| 295 | Prefilter + Prefilter Casing | Air Intake System |
| 296 | Prefilter + Prefilter Casing | Air Intake System |
| 297 | Prefilter + Prefilter Casing | Air Intake System |
| 298 | Prefilter + Prefilter Casing | Air Intake System |
| 299 | Prefilter + Prefilter Casing | Air Intake System |
| 300 | Accessory kit: Paints for 10UBA61/63/65 Kl.3 UN1263 | Power Control Center, PPC |
| 301 | COVER ASSEMBLY-UPPER | Generator for Steam Turbine |
| 302 | COVER ASSEMBLY-BOTTOM | Generator for Steam Turbine |
| 303 | BRUSH CARRIER S.D. | Generator for Steam Turbine |
| 304 | Generator ROTOR BODY ASSEMBLY | Generator for Steam Turbine |
| 305 | COVER FOR INTERMEDIATE SHAFT | Generator for Steam Turbine |
| 306 | SEALING WALL | Generator for Steam Turbine |
| 307 | FOUNDATION BEAM BRUSH CARRIER | Generator for Steam Turbine |
| 308 | Bushing | Generator for Steam Turbine |
| 309 | Bushing | Generator for Steam Turbine |
| 310 | Bushing | Generator for Steam Turbine |
| 311 | COVER ASSEMBLY | Generator for Steam Turbine |
| 312 | Bushing | Generator for Steam Turbine |
| 313 | STANDSTILL BLOWER FOR SLIPRING PART | Generator for Steam Turbine |
| 314 | Bushing | Generator for Steam Turbine |
| 315 | Bushing | Generator for Steam Turbine |
| 316 | RADIALVENTILATOR Unit 10 | Generator for Steam Turbine |
| 317 | 40' Container | Air Intake System |
| 318 | 40' Container | Air Intake System |
| 319 | AIS Baffle Unit 10 | Air Intake System |
| 320 | AIS Baffle Unit 10 | Air Intake System |
| 321 | AIS Baffle Unit 10 | Air Intake System |
| 322 | Unit 10 RU1900 Insulation Material | Isolation Gas Turbine |
| 323 | Unit 10 RU1900 Insulation Material | Isolation Gas Turbine |
| 324 | I&C Equipment - UNIT10 Erection material | Control Equipment I&C GT |
| 325 | I&C Equipment - UNIT10 connection material | Control Equipment I&C GT |
| 326 | I&C Equipment - UNIT10 commissioning spares | Control Equipment I&C GT |
| 327 | I&C Equipment - 10CPG21 Geno H2 Protection Cabinet | Control Equipment I&C GT |
| 328 | I&C Equipment - UNIT10 WINTS - Equipment | Control Equipment I&C GT |
| 329 | I&C Equipment - GENO H2 10CPG21 Protection cabinet frame | Control Equipment I&C GT |
| 330 | I&C Equipment UNIT10 Vibrometer ARGUS and Emergency Push buttons | Control Equipment I&C GT |
| 331 | 18.1.3.W.0 Gas Turbine | Spare Parts all components |
| 332 | 18.1.3.W.1.11 Hydraulic Oil Package | Spare Parts all components |
| 333 | 18.1.3.W.1.10 Hydraulic Clearance Optimization | Spare Parts all components |
| 334 | 18.1.3.W.1.9 Fuel Gas Package 18.1.3.W.1.23 Dual Fuel Package | Spare Parts all components |
| 335 | 18.1.3.W.1.14 Air Intake System | Spare Parts all components |
| 336 | 18.1.3.W.1.22 Automation System Turbo Set GT SPPA-T3000 | Spare Parts all components |
| 337 | 18.1.3.W.3.1 Geno Day to Day SGEN5-2000H | Spare Parts all components |
| 338 | 18.1.3.W.1.3 Misc Electrical 18.1.3.W.1.25 Control Air Supply Package 18.1.3.W.3 Geno Day to Day SGEN5 | Spare Parts all components |
| 339 | 18.1.3.W.3.1 Geno Day to Day SGEN5-2000H | Spare Parts all components |
| 340 | 18.1.3.W.1.13 Fuel Gas Piping | Spare Parts all components |
| 341 | 18.1.3.W.1.8.1 Power Control Center Spare Parts | Spare Parts all components |
| 342 | 18.1.3.W.1.18.1 GT Standstill Air Dryer Spare Parts | Spare Parts all components |
| 343 | EXHAUST DUCT, TURBINE; Diffusor | Gas Turbine compressor rotor with casing |
| 344 | I&C Equipment - | Control Equipment i&C Steam Turbine |
| 345 | I&C Equipment - | Control Equipment i&C Steam Turbine |
| 346 | I&C Equipment - | Control Equipment i&C Steam Turbine |
| 347 | I&C Equipment - | Control Equipment i&C Steam Turbine |
| 348 | I&C Equipment - | Control Equipment i&C Steam Turbine |
| 349 | LUBE OIL, TURBINE BEARING | Gas Turbine compressor rotor with casing |
| 350 | Fittings for GT/GT Aux | Gas Turbine compressor rotor with casing |
| 351 | Supports Plates | Gas Turbine compressor rotor with casing |
| 352 | GT, Compressor Support Assembly | Gas Turbine compressor rotor with casing |
| 353 | Control Valves, Cooling Air | Gas Turbine compressor rotor with casing |
| 354 | Transmission Lines, Complete | Gas Turbine compressor rotor with casing |
| 355 | Annular Piping, complete | Gas Turbine compressor rotor with casing |
| 356 | Support Block, turbine | Gas Turbine compressor rotor with casing |
| 357 | Support, Compressor, Left | Gas Turbine compressor rotor with casing |
| 358 | CONTROL BLOCK, TURNING GEAR | GT Aux.: Interconnecting piping |
| 359 | COMPANY LOGO, GAS TURBINE | Gas Turbine compressor rotor with casing |
| 360 | Blow Off Piping | Gas Turbine compressor rotor with casing |
| 361 | Cooling Air Piping | Gas Turbine compressor rotor with casing |
| 362 | Small Parts for GasTurbine | Gas Turbine compressor rotor with casing |
| 363 | Temperature Instruments, Gas Turbine | Gas Turbine compressor rotor with casing |
| 364 | Temperature Instruments Gas Turbine, Accessories | Gas Turbine compressor rotor with casing |
| 365 | Support, Compressor, Right | Gas Turbine compressor rotor with casing |
| 366 | GT, Support, Compressor, Right | Gas Turbine compressor rotor with casing |
| 367 | Outdoor Installation, Adjusting Device | Gas Turbine compressor rotor with casing |
| 368 | Intermediate Shaft | Gas Turbine compressor rotor with casing |
| 369 | OIL COLLECTING TRAY | Gas Turbine compressor rotor with casing |
| 370 | Blank Flange | Gas Turbine compressor rotor with casing |
| 371 | Drainage Nozzle, Gas Tubine | Gas Turbine compressor rotor with casing |
| 372 | BEARING COVER, COMPRESSOR | Gas Turbine compressor rotor with casing |
| 373 | Actuator, Inlet Vanes | Gas Turbine compressor rotor with casing |
| 374 | Assembly, Generator | Gas Turbine compressor rotor with casing |
| 375 | SEAL AIR VALVE, FUEL OIL | Gas Turbine compressor rotor with casing |
| 376 | Base, Rotor Turning Device | Gas Turbine compressor rotor with casing |
| 377 | Shutoff Flap, Checked | Gas Turbine compressor rotor with casing |
| 378 | Shutoff Flap, Checked | Gas Turbine compressor rotor with casing |
| 379 | Rating Plate Gas Turbine | Gas Turbine compressor rotor with casing |
| 380 | Center Guide, Gas Turbine | Gas Turbine compressor rotor with casing |
| 381 | TURBINE SUPPORTS | Gas Turbine compressor rotor with casing |
| 382 | GT, Support, Compressor, Left | Gas Turbine compressor rotor with casing |
| 383 | Mounting-Material | Gas Turbine compressor rotor with casing |
| 384 | Instruments, turbine bearing | Gas Turbine compressor rotor with casing |
| 385 | Support Extension, Cooling Air | Gas Turbine compressor rotor with casing |
| 386 | Fuel Oil Burner with Thermocouple | Gas Turbine compressor rotor with casing |
| 387 | Measuring Instruments | Gas Turbine compressor rotor with casing |
| 388 | RESISTANCE THERMOMETER | Gas Turbine compressor rotor with casing |
| 389 | TRANSPORTATION DEVICE Unit 10 | Gas Turbine compressor rotor with casing |
| 390 | TRANSPORTATION DEVICE V94.3A (2 )-VS Unit 10 | Gas Turbine compressor rotor with casing |
| 391 | LIFTING SLING Gas Turbine Unit 10 | Gas Turbine compressor rotor with casing |
| 392 | LIFTING SLING Gas Turbine Unit 10 | Gas Turbine compressor rotor with casing |
| 393 | Plugs Condenser Unit 10 | Condensing system |
| 394 | CONDENSER SLIDING SUPPORTS | Condensing system |
| 395 | VACUUM PUMP (Condenser) MAJ | Vacuum Pumps |
| 396 | VACUUM PUMP (Condenser) MAJ | Vacuum Pumps |
| 397 | Jointing Compound Kl.3 UN1133 | Turbine H-Type |
| 398 | Adhesive | Turbine H-Type |
| 399 | Installation material - Unit 10 S-1066 | Isolation Gas Turbine |
| 400 | Turbine Section Assy. | Turbine E-Type |
| 401 | Stop/Control Valve 28015100 | Valves for Steam turbine |
| 402 | Piping | Turbine H-Type |
| 403 | Lifting Fixture | Turbine H-Type |
| 404 | Lifting Beam | Bearings and Bearing Casings 1, 2, 3 |
| 405 | Stop/Control Valve 18015100 | Valves for Steam turbine |
| 406 | 1STAGE ANGLE VALVE | Valves for Steam turbine |
| 407 | Valve Block | Turbine H-Type |
| 408 | Container | Encloser GT, ST and Generator |
| 409 | Container | Encloser GT, ST and Generator |
| 410 | Container | Encloser GT, ST and Generator |
| 411 | Container | Encloser GT, ST and Generator |
| 412 | Container | Encloser GT, ST and Generator |
| 413 | Container | Encloser GT, ST and Generator |
| 414 | Container | Encloser GT, ST and Generator |
| 415 | Steel structure | Encloser GT, ST and Generator |
| 416 | Steel structure | Encloser GT, ST and Generator |
| 417 | Steel structure | Encloser GT, ST and Generator |
| 418 | Steel structure | Encloser GT, ST and Generator |
| 419 | Steel structure | Encloser GT, ST and Generator |
| 420 | Steel structure | Encloser GT, ST and Generator |
| 421 | Non return damper | Encloser GT, ST and Generator |
| 422 | Angles, profiles, panels, assembly material | Encloser GT, ST and Generator |
| 423 | Spare Parts | Air Intake System |
| 424 | Spare Parts | Air Intake System |
| 425 | Spare Parts | Air Intake System |
| 426 | BASE FRAME ACCESSORIES | Generator for Steam Turbine |
| 427 | Verbrauchsmaterial - Unit 10 | Erection and Commissioning Material |
| 428 | FLUSHING OPERATION, PCM-Report 1-12-010170-01-008 | Turbine H-Type |
| 429 | Eaton spare fillter elements for MAV skid unit 10 type: 1000.25G.10.B.P. | Steam Turbine Lube Oil Module |
| 430 | Welding Rods | Erection and Commissioning Material |
| 431 | Charge Amplifier IPC704 | Erection and Commissioning Material |
| 432 | GT commissioning consumables | Erection and Commissioning Material |
| 433 | Flange (PCM-Report 1-12-020400-01-001) | Turbine H-Type |
| 434 | Rating plate - Unit 10 | Turbine H-Type |
| 435 | Flange (PCM-Report 1-12-020400-01-002) | Turbine H-Type |
| 436 | Flange | Turbine H-Type |
| 437 | Consumables | Erection and Commissioning Material |
| 438 | Welding material | Erection and Commissioning Material |
| 439 | GT Commissioning consumables | Erection and Commissioning Material |
| 440 | GT erection consumables Bgr. 101 | Erection and Commissioning Material |
| 441 | Welding consumables | Erection and Commissioning Material |
| 442 | Seal Rings | Gas turbine IBS Tools |
| 443 | GT combustion chamber inspection consumables | Erection and Commissioning Material |
| 444 | Binder including techn documentation | |
| 445 | Binding including techn. Documentation | |
| 446 | Binding including techn. Documentation | |
| 447 | Binding including techn. Documentation | |
| 448 | Binding including techn. Documentation | |
| 449 | Binding including techn. Documentation | |
| 450 | Binding including techn. Documentation | |
| 451 | Binding including techn. Documentation | |
| 452 | Binding including techn. Documentation | |
| 453 | Jointing Compound; PCM-1-14-002982 | Turbine H-Type |
| 454 | Adhesive, PCM 1-14-002982 | Turbine H-Type |
| 455 | AVIT Unions | GT Aux.: Pneumatic Skid |
| 456 | Paint materials | Exhaust gas system |
| 457 | Paint materials | Exhaust gas system |
| 458 | Spare Part | Fire-Fighting System (CO2) |
| 459 | Adhesive, PCM-Report 1-14-002982 | Turbine H-Type |
| 460 | Adhesive, PCM-Report 1-14-002982 | Turbine H-Type |
| 461 | SUPPORT RING | Turbine H-Type |
| 462 | KRYTOX - NON-DANGEROUS | Generator for Steam Turbine |
| 463 | LOCTITE 50 CC | Generator for Steam Turbine |
| 464 | LOCTITE | Generator for Steam Turbine |
| 465 | HAZARDOUS MATERIAL - BOM | Generator for Steam Turbine |
| 466 | LOCTITE & KRYTOX HAZARDOUS MATERIAL | Generator for Steam Turbine |
| 467 | ADHESIVE SPRAY, ADHESIVE, CORROSION PROTECTION | Generator for Steam Turbine |
| 468 | CONTINGENCY SPARE PARTS | Generator for Steam Turbine |
| 469 | RESIN KIT - HAZARDOUS | Generator for Steam Turbine |
| 470 | Unit 10 FIRE PROTECTION VALVE RACK RU1900 | Generator H2 gas skid |
| 471 | Unit 10 GAS SKID ASSEMBLY RU1900 | Generator H2 gas skid |
| 472 | Generator Unit 10 Shop Final | Generator for Steam Turbine |
| 473 | CONTAINER, 20 FT TTNU168467-3 | Generator for Steam Turbine |
| 474 | CONTAINER, 40 FT (BALANCE) GVDU 402711-9 | Generator for Steam Turbine |
| 475 | Trunnions & Bolts | Generator for Steam Turbine |
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Complete Plants sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.