Attention
This item is no longer available.Welcome to Salvex Marketplace where you can buy surplus, salvage, and discounted Land Rigs and Equipment as part of a commercial repurposing strategy.
Attention
This item is no longer available.| ID | : | 182981315 |
| Seller | : | |
| Seller Industry | : | |
| Original Wholesale Value | : | $3,750,000 |
| Quantity | : | 1 Hydraulic Rig |
| Manufacturer | : | Dietswell View more items from this manufacturer |
| Condition | : | Complete surplus unit. Since reconditioned, the rig has done three workovers. The rig is dismantled (“cold stacked”) and packed ready for shipment. All the items are "AS IS, WHERE IS". Buyer is responsible for shipping, loading, and handling. |
| | : | |
| Product Location | : | |
| End Time | : | |
This 1000HP Range 3 Hydraulic Rig is no longer needed for company's own operation and is being sold as an asset liquidation for its owner.
*Partial selling is possible. Please contact the market maker about the equipment you are interested in.
| EQUIPMENT | QTY | DESCRIPTION |
| SECTION A - GENERAL RIG CHARACTERISTICS | ||
| General | ||
| Rig Name | ||
| Model and Type | Trailer mounted-self elevation | |
| Owner | ||
| Designer | ||
| Built | 2007 | |
| Location (At effective Date) | Almeria - Spain | |
| Drive Engines | 2 | 450 HP - 3408 CAT engines |
| Power Generating And Distribution Equipment | ||
| Type | Diesel generators CAT 3412 | |
| Maximum rated HP output at 125°F. | 1 | 1000 HP |
| Number | 2 | |
| Power control | Elec / Hydraulic | |
| Type | CAT 3412 | |
| Power rating | 2 | 815 KVA each |
| Power distribution | 400 V x 50Hz | |
| SCR Configuration | NA | |
| Emergency Lighting | ||
| Accumulator Unit | ||
| Rig Floor | 1 | Self contained lighting unit with built in battery |
| Sub-Base | 1 | Self contained lighting unit with built in battery |
| Monkey Board | 1 | NA |
| Mud Pits | 4 | Self contained lighting unit with built in battery |
| SCR/Power Generation House | 1 | Self contained lighting unit with built in battery |
| Generators | 2 | Self contained lighting unit with built in battery |
| Air Compressors | ||
| Quantity | 2 | |
| Make & Type | Ingersol-Rand MH55 | |
| Power Supply & Pressure | Electric x 125 psi | |
| Air Receivers (Volume) | 1 | 400 lit |
| Location | Auxiliary container w/ BOP Accumulator | |
| Rig Operating Capabilities | ||
| Capacity | 3000 meters x 5” D.P. | |
| Input HP | 975 HP | |
| Dimensions | ||
| Drill floor Dimensions | 4m x 7m | |
| Storage Capacity | ||
| Total Fuel Tank Capacity | 70 000 litres | Two Tanks 2,4mx6mx2m each Plus daily tank 11m3 Spill Bunding |
| Total Water Tanks Capacity | 180 BBLS | |
| Drilling Equipment | ||
| MAST | ||
| Make and Type | Joseph Paris - Hydraulic | |
| Dimensions Crown Height | Hydraulic mast | |
| Clear Height Rotary Table to Crown | 22,8m | |
| Clear Height Rotary Table to Elevators | 17,5m | |
| Gross Nominal Capacity with max number of lines? | Hydraulic cylinders | 160 metric tonnes up to 16m through elevator links |
| Hook Load Rating with 10 Line static Load | Hydraulic cylinders | 160 metric tonnes up to 16m |
| Hook Block rate and type | Foremost hydraulic Top Drive 160 Metric Tonnes through the elevator links 150 Tons through drill string | |
| Crown Block - Type | ||
| ~Rating Sheave Capacity | 40 M. Tonnesx4= 160 M.Tonnes | |
| ~ Number & Diameter of Sheaves | 4 | Sheaves 32" |
| ~ Bumper Blocks under Crown | Included in hydraulic cylinders | |
| SUBSTRUCTURE | ||
| Make and Type | Joseph Paris – Self elevating | |
| Height Rotary Table to Ground Level | 5.60 m | |
| Clear Height under Rotary Beams to Ground Level | 5.10 m | |
| Hook or Rotary Load | Max Rotary table Supporting Capacity Irrespective of Set Back Load 550,000 lbs | |
| HOISTING EQUIPMENT | ||
| DRAWWORKS | ||
| Make-type | 2 x Hydraulic cylinders operated by Hyd system 4 main Hyd pumps REXROTH A11VO 190 LRDQ/ 11LNSD12N00 driven from Rig Carrier 3408 Engines. Max Press = 320 bars - 4650 psi Operating press = 250 bars - 3600 psi ** For hoisting mast and Top drive rotation Max flow : 380 L / min Max press: 320 bars ( 4650psi) 2 auxiliary Hyd pumps REXROTH A10VO45 DFR 31LPSC62K52 Driven from Rig carrier 3408 ** For service network ( pipefeeder , BOP hoisting , Trailer rig up / down , tubularelevator , winches Max flow : 90 L / mn Maxpres : 210 bars ( 3000 psi) | |
| Rated input power HP | 950 HP | |
| Motors | 2 | CAT 3408 |
| Drilling Depth Range ft | 10 000 ft | |
| Main drum brake type (Band or Disc) | Hydraulic shut off valve | |
| Number of Hoisting speed | 2 | Automatic Hydraulic low speed when hook load is over 90 mTonnes |
| Number of Rotary speed | Variable 0 to 130 RPM | |
| BRAKE COOLING TANK | ||
| Cooling System | Oil- Air heat exchangers -Nominal heat dissipation : 420 kW @ dT = 40° C | |
| DEADLINE ANCHOR | ||
| Make and model Load Rating Wraps | 4 | One hydraulic load cell per line. Different from conventional rig |
| CROWN SAVER | ||
| 2 | Built in Hydraulic cylinders system | |
| AUTO DRILLER | 1 | Automaton driving the hydraulics as per diller’s settings |
| T RAVELING ASSEMBLIES | ||
| Block, Type and Rating | NA | |
| Hook, Type and Rating | 150 tons through string and 160 M Tonnes through elevator links | |
| DRILLING LINE | ||
| Size, Manufacturer Wire Type Core Nominal Breaking Capacity | 1-¼” (32mm) REDAELI Tecna Wire Ropes Galvanized steel core – Antigiratory – ECA 16B32 87 metric tonnes | |
| String up Length Length remaining on (As at contract effective date) | 19.5m NA NA | |
| TOP DRIVE UNIT OR POWER SWIVEL | Foremost Industries F150-T | |
| Power Input | 500HP | |
| Maximum Load | 150 tons through string and 160 M Tonnes through elevator links | |
| Maximum Drilling Torque (Continual @ 150 RPM) | 25,000ft.Lbs @ 103 RPM | |
| Maximum RPM | 130 RPM | |
| Maximum Make Up Torque | 25,000ft.Lbs | |
| Maximum Break Out Torque | 25,000ft.Lbs | |
| Drillers Console Display | Torque, RPM and position displayed at driller’s consol | |
| ROTARY EQUIPMENT | ||
| Rotary Table | ||
| Make and Type | Passive table | |
| Opening | 37-1/2” opening | |
| Master Bushings | Split VARCO | |
| Bowl Inserts for Casing & Drill pipe | 1 1 1 1 | 20" 14 7/8” 12" 10" |
| Capacity | 550,000 lbs | |
| R OTARY TABLE SLIPS | ||
| Drill Collar | 2 2 | 4-3/4” Varco DCS-L 6 ¾” Varco DCS-L |
| Drill Pipe | 1 1 | DENCON, AIR OPERATED 5” Type SL-1 3 ½” Type SL-1 |
| D RILL STRING SPINNER AND TORQUE TOOL | 1 | NOV ST-80 Iron Roughneck |
| M UD SAVER BUCKET | 1 | c/w 5" & 3-1/2" inserts |
| B IT BREAKER PLATES | 1 1 | 6" 8-1/2" |
| A IR HOISTS | ||
| On the rig floor Rating | 1 1 | Hydraulic One= 5 T & One= 2 T |
| Rig Floor dedicated and Design Man Rider Load Rating 250 kg | 1 | NA Certified basket on hydraulic on Manitou arm |
| PIPE HANDLING EQUIPMENT | ||
| L IFTING SUBS | ||
| D/C’’s | 6 6 | 4 ¾ x 3 ½ IF Conn 6 1/2 x 4½ IF Conn |
| L IFTING CAPS | ||
| 3 1/2 DP | 2 | 3-1/2” IF (Lift Cap Pin) |
| 5 DP | 2 | 4-1/2” IF (Lift Cap pin) |
| 6-½” DC | 2 | 4 ½ IF |
| TANDARD – STRING ELEVATORS | ||
| 3-1/2” Drill Pipe | 2 | 2 Varco MGG, Center latch |
| 5” Drill Pipe | 2 | Varco MGG, Center latch |
| 3-1/2 tubing | 2 | CONCENTRIC HYD ELEVATOR WITH INSERT 5”, 3 ½” & 2 7/8” |
| 2-7/8 tubing 2-3/8 Tubing | 2 | SAME AS ABOVE |
| S TANDARD MANUAL SLIPS | ||
| 3 1/2" DP | 2 | Varco SDXL |
| 5" DP | 2 | Varco SDML |
| 4 3/4” DC | 2 | Varco DCS-L |
| 6 ½” DC | 2 | Varco DCS-L |
| Tubing slips | 1 | Tubing Spider Air Operated Model 100A Type C - 100 tons 4 ½ , 3 ½ , 2 7/8 and 2 3/8 size |
| RIG TONGS | ||
| 4” to 8-1/2 | 2 | Rated load capacity 65,000 Ft- |
| Lb’s | ||
| Proof Load 100,000 Ft-Lb’s | ||
| 4’’ to 8 ½ OD | ||
| DRILL PIPE SPINNING TONG | ||
| Make & Type | NOV ST-80 Iron Roughneck | |
| Size & Range | 2 7/8” thru 8 ½” | |
| Power Supply | Hydraulic | |
| Dog Collars/Safety Clamp | ||
| Number | 1 | 4 ¾” - 8” Bash Ross |
| DRILL STRING | ||
| 3-1/2” D/P | 2200m | S-135 R2 13,3 Lbs NC 38 Px B thread - IPC |
| 3-1/2” D/P - Pup Joint | Qty 2x 5ft | S-135 R2 13,3 Lbs NC 38 Px B thread - IPC |
| 3-1/2” D/P - Pup Joint | Qty 2 x 10ft | S-135 R2 13,3 Lbs NC 38 Px B thread - IPC |
| 3-1/2” HWDP | 30 jts | 23.5 lb/ft Range 2 NC 38 Px B thread - |
| 4-3/4” SPIRAL COLLARS | 8 jts | 46.6 lb/ft Range 2 NC 38 Px B thread - |
| 4-3/4” SHORT/SLICK COLLARS | N/A | |
| 5” D/P “E” Grade Drill Pipe | 2200m | S-135 R2 19,5lbs NC 50 Px B thread |
| 5” D/P “G” Grade Drill Pipe | Qty 2x 5ft | S-135 R2 19,5lbs NC 50 Px B thread |
| 5” D/P Pup Joint | Qty 2 x 10ft | S-135 R2 19,5lbs NC 50 Px B thread |
| 5” D/P Pup Joint | Qty 4 x 10ft | S-135 R2 19,5lbs NC 50 Px B thread |
| 5” HWDP | 30 jts | 50 lb/ft Range 2 NC 50 Px B thread |
| 6 ½” SPIRAL COLLARS | Qty 8 | 6½ Spiral DC 88.6 lb/ft Range 2 - 4 ½ IF PxB thread |
| SUBS INVENTORY | ||
| BIT SUBS | 2 | 3 ½ Reg B x 3 ½ IF B |
| 2 | 4 ½ REG B x 4 ½ IF B | |
| CROSSOVER SUBS | ||
| 2 | 6 5/8 REG P X 4 ½ IF B | |
| 2 | 4 ½ IF P X 4 ½ IF B | |
| 2 | 3 ½ IF P X 3 ½ IF B | |
| 2 | 4 ½ IF B X 2 7/8 N VAM P | |
| 2 | 4 ½ IF B X 2 7/8 EU P | |
| 2 | 4 ½ IF B X 3 ½ EUE P | |
| 2 | 4 ½ IF P X 3 ½ IF B | |
| 2 | 4 ½ IF B x 3 ½ IF P | |
| 2 | 4 ½ IF B X 3 ½ N VAM P | |
| 2 | 4 ½ IF B X 4 ½ EUE P | |
| 2 | 4 ½ IF B X 4 ½ N VAM P | |
| 2 | 3 ½ IF B X 2 7/8 N VAM P | |
| 2 | 3 ½ IF B X 2 7/8 EUE P | |
| 2 | 3 ½ IF B X 3 ½ N VAM P | |
| 2 | 3 ½ IF B X 3 ½ EUE P | |
| 2 | 3 ½ IF B X 4 ½ N VAM P | |
| 2 | 3 ½ IF B X 4 ½ EUE P | |
| CIRCULATING SUBS | ||
| Top Entry Circulating | 1 | 4-1/2” IF (P) x 1502 Weco |
| Top Entry Circulating | 1 | 4-1/2” IF (B) x 1502 Weco |
| Top Entry Circulating | 1 | 3-1/2” IF (P) x 1502 Weco |
| Circulating System | ||
| Shaker Tank Sand trap Settling Pit Intermediate Pit Trip Tank | 1 | 320 bbl Total Capacity 50 bbl 65.4 bbl 175 bbl 29.6 |
| Suction Tank Pill Tank Suction Pit 1 Slug Pit | 1 | 471 bbl Total 150 bbl 316 bbl 5 bbl |
| Reserve Tank Reserve 1 Reserve 2 Reserve 3 | 1 | 466 bbl Total 233 bbl 233 bbl Xxx bbl |
| Caustic Mixing Facility Mobile tank top Caustic Drum Closable Lid c/w agitation Bottom end 2” discharge c/w hose | 1 | 1 x 1.25 bbl Capacity 1” Outlet |
| Trip Tank Manual Level Indicator Visual to Driller (Level increments no greater than 1bbl/inch) Feed Pumps to Wellbore | 1 1 2 | 29.6 bbl Indicator Visible to Driller 2x3 Halko Centrifugal Pump |
| Mud Through Width Depth Under Grating (which tanks ?) | 1 | 14” diam pipe NA Shaker tank |
| Pumps | ||
| Number | 2 | |
| Type | Triplex, Emsco Type RS F1000 | |
| Drive | Independent Diesel DETROIT DIESEL 12V2000 G81 1120bhp at 1800 RPM | |
| Maximum Input Horse Power Per Pump HP | 1000 HP each | |
| Stroke Length | 10 inch | |
| Liner Sizes Available (for both pumps) 5-1/2” and Pressure Rating 6” and Pressure Rating 6-1/2” and Pressure Rating | 6 ½”, 6” , 5” , 4 ½” 5-1/2” 4000 psi 6” 3000 psi 6-1/2” 2500 psi | |
| Pulsation dampeners (1/pump) Make Pressure Rating | 1 | Hydril 20 gal/5000psi |
| Reset Relief Valves (1 each pump) | 1 | RRV Retsco |
| Charging Pumps (1/pump) | 1 | HALCO 5”x4”x14” |
| Suction Strainer | 1 | Suction strainer |
| Discharge Strainer | 1 | Dischrage strainer |
| Standpipe Manifold Pressure Rating Size Number of 2” 1502 Outlets | 2 | 5000PSI 4”OD x 3” ID |
| Shale Shaker Make & Type | 3 | Model MISwaco Mongose dual motion With 80 and 100 mesh Screens |
| Vacuum Degasser Make & Type | 1 | Burgess 1000 Magna Vac |
| Agitators | ||
| Make & Type | TRAMAT Type Propeller 15hp Location: 1 per compartment | |
| Poor-boy Degasser | 1 | |
| Make & Type Style Size OD Size Height Mud Seal Height | 1 | 3Cmetal Dubai Baffle type 48” 5meters 12 ft |
| Mixing Pumps | ||
| Make & Type Sizing GPM | 2 | Halco Centrifuge 6” x 8” x 11’’ - 1750 RPM 800gpm - 75 HP |
| Hole Fill Pump | ||
| Make & Type Sizing GPM | 1 | Mission 2” x 3” 75gpm-20HP |
| Rig Water Pump | ||
| Make & Type | 1 | Mission 2” x 3” 75gpm |
| Surface Lines | ||
| Size & Type (Connection) & Rating Hard Pipes Size & Type (Connection) & Rating Jumper Hoses Length | 1 | Hard pipe Sched 80, connection flanged and hammer seal connection |
| Shock - Rotary Hose | 1 | |
| Size & Type (Connection) & Rating Length | 3”ID x 5000psi with safety chain 58.5ft | |
| Stand Pipe | 1 | |
| Size & Type (Connection) & Rating | 4”OD x 3”ID 5000psi Wing union 4” FIG-1002 | |
| WELL CONTROL EQUIPMENT | ||
| 11” Annular Type Preventers | 1 | |
| Make & Type Date of Delivery January 2015 | Hydril GK 10.000psi flange bottom x 5.000psi studded top | |
| Pressure Rating psi | 1 | 5000psi |
| Spare 11” Hydril Annular Element | 0 | Spare annular element |
| Ram Type Preventers | ||
| 11” Ram Type (Single Gates) | ||
| Size | 11” | |
| Make & Type Date of Delivery January 2015 | 1 | Chenkai Type U, 11” x 10K Flange Top & Bottom with (2) 3-1/16” 10K Flanges side outlets |
| Pressure Rating psi | 10.000psi | |
| 11” Ram Type (Double Gates) | ||
| Size | 11” | |
| Make & Type Date of Delivery January 2015 | 1 | Chenkai Type U, 11” x 10K Flange Top & Bottom with (2) 3-1/16” 10K Flanges side outlets |
| Pressure Rating psi | 10.000psi | |
| Rams | ||
| For 11” BOP | ||
| 4-1/2” Sets | 1 | 4-1/2” rams |
| 5-1/2” Sets | 1 | 5-1/2” rams |
| 7” Sets | 1 | 7’’ rams |
| Set variable ram 3-1/2” to 5” | 1 | set variable ram |
| BLIND Shear | 1 | 1 Set Complete Block |
| Adapter | ||
| Adapter 13-5/8” x 10K hub x 11” 10K studded | 1 | Adapter |
| Spacer Spool | ||
| WP | 1 | 11” x 5000psi |
| Top connection | 11” 5k Studded | |
| TOP Size | 11” | |
| Bottom connection | 11” 3k Studded | |
| Bottom Size | 11” | |
| Bell Nipples | ||
| 11” telescopic Bell nipple | 1 | 11 ‘’ telescopic bell nipple |
| Accumulator Unit | ||
| Make & Type | 1 | ENERTEC E-Series style |
| 4 Way Valve Control Functions | 6 functions | |
| Reservoir Capacity | 280 Gal | |
| Accumulator Pressure | 3500 psi | |
| No. Of Accumulator Bottles | 8 bottles | |
| Bottle Capacity | 11Gal each | |
| Main Control - Location | Driller’s control room | |
| Emergency Power | 5 gls Air bottle | |
| No. of Electric Pumps (Triplex 1”) & Type | One electric pump model UET20-B | |
| No. of Air Pumps & Type | Two Big-Sixty 60:1 air pumps | |
| Choke Valves, Line & Manifold | ||
| Make & Type | 1 | DOYLE VALVES type F C gate valve 3 1/8 |
| Pressure Rating | 5000 psi | |
| Remote Controlled Auto Choke | ||
| Location | In the driller’s control room | |
| Automatic Choke Control - Emergency Power | Hyd hand pump | |
| Automatic Choke Control Supply | Air operated | |
| HCR Valve on Choke Line | 1 | Cameron Hyd type |
| Manual Adjustable Choke Size & Type & Rating | 2 | Niddle 2 ” x 5000psi |
| Choke Line Size & Type & Rating | 1 | 3 1/8” x 5000psi steel armored |
| Choke Manifold Valves Size & Type & Rating | As per drawing | Gate valves 3 1/8” x 5000psi |
| Kill Line & Valves | ||
| Kill Line Size, Rating & Description | 1 | 2”ID 5000psi |
| Kill Line Valve Size, Rating & Description | 1 | One Hyd Gate valves 3 1/8” x 5000psi. One manual Gate valves 3 1/8” x 5000psi. |
| Kelly Cock Valves | ||
| Upper Kelly Cock | N/A only IBOP on the TDS | |
| Lower Kelly Cock | N/A no Kelly on this rig | |
| FOSV | ||
| Size & Type | 2 | 6 ½ OD Kelly guard ball valve type 4 ½ IFPxB - 5K WP |
| Size & Type | 2 | 4 7/8” OD Kelly guard ball valve type 3 ½ IF PxB - 5K WP |
| Inside BOP | ||
| 4-1/2” IF | 1 | Gray valve 6 5/8 10M P x B 4 ½ IF connections |
| 3-1/2” IF | 1 | Gray valve 5 ¼ 10 M 3½ IF PxB connections |
| BOP Test Pump | ||
| Make | 1 | BUXTON |
| Type | Type S 15G-M air operated | |
| Rating | 15.000 psi with chart recorder | |
| Cup Testers | ||
| Casing 48-61Lb/ft | 1 | Type F Packard Int’l 4 1/2 IF PX B Thread |
| Casing 43,5-53,5Lb/ft | 1 | Type F Packard Int’l 3 ½ IFPxB thread |
| INSTRUMENTATION | ||
| Weight Indicator | 1 | |
| Make | AUTELEC in metric tons | |
| Parameters [Drilling] Recorder | ||
| Make & Type | 1 | AUTELEC |
| Number of Pens | Computerized / recorded | |
| Recording | 1 1 1 1 1 1 | Hook Load, ROP, TRQ, RPM, Pump Pressure, SPM 1 & 2 |
| DEVIATION/DIRECTIONAL EQUIPMENT | ||
| Deviation Surveying Equipment | ||
| Make & Type | 1 | TOTCO |
| Range | 8 - 16° | |
| Timer Installation & Retrieving Tools | ||
| OTHER RIG INVENTORY EQUIPMENT NOT LISTED IN SECTIONS A&B | ||
| Critical Spare Parts | Existing. Detailed list will be provided at contract signature | Full set of spare parts for all equipment sufficient for 100 days operation or two complete WELLS, either on site or at main base. (Require Critical Spares List). |
| Fire Prevention And Safety Equipment | ||
| Emergency Shut Down on Rig Floor | 1 | Electronic - Drillers Console activates shutdown of 4 x Generators |
| Rig water fire pump system | 1 | DIESEL DRIVEN H2O/FOAM |
| Portable fire extinguishers Confirm Certification date at contract effective date | 12 5 15 24 8 3 | 12 x CO2 6kg. 5 x CO2 9kg 15 x Powder 6kg 24 x Powder 9kg 8 x Powder 12kg 3 x Powder 50kg |
| Eye wash station | 3 | Located on mud system |
| Emergency Shower | 1 | Mud Tanks |
| Breathing Equipment | ||
| Work Packs Confirm Certification date at contract effective date | 10 | (10)Breathing insulator equip. Drager SAVER CF10 (10) Boxes for CF10 (10)Breathing insulator equipment PA94+ (10)Panoramic mask NOVA P (10) Boxes for NOVA P (10)Aluminum 6 liters Bottles 200bar |
| Escape Packs | 5 | Masks with H2S Filter |
| First Aid Kits | 2 | Rig Supt office - clinic |
| Fire Detection Equipment | Set | Smoke Detectors |
| Gas Detection | ||
| Portable Gas Detectors Calibration Equipment Confirm Certification date at contract effective date | 1 1 | Measuring LEL.O2 CO2 H2S Tube & Regulator |
| H2S Detectors Confirm Certification date at contract effective date | Set | Located on the mud system , flow line , shakers |
| Communication Equipment | ||
| Satellite Communication System | Use of internet 3G system and mobile phone | |
| Computer | 4 | For Rig Sup, Mech , elec , safety coordinator |
| Printer | 1 | |
| Rig Camp | ||
| Rig site office | 1 | 1 x Company man /Geologist 1 x Rig supt/Radio operator 1x mechanic / Electrician / Other 1 x HSE/Clinic 1 x Meeting room/Prayer room 1 x Services company room / Toilet unit |
| Cranes / Vehicles | ||
| Forklift | 2 | Manitou Model MRT 2150 Privilege forklift with fork , man riding basket and pipe picker device to handle tubulars for handling 2 7/8” to 13 3/8” Lift Cap 5000kg Lifting Height 20.60 meters Max Reach 18.10m Lift Max at Max reach 600kg |
| Welding machines | ||
| Electric welding machines | 1 | ADC TRIARC / 406 / L 400 amps welding unit |
| Torch oxygen-acetylene welding sets | 1 | One set oxy-Ace cutting torch c/w fash back arrestor |
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing Oil and Gas and Land Rigs and Equipment sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.