Attention
This item is no longer available.Polytrack Clinker Cooler - for Cement Industry and Plants (1 Unit) - Unused / Never Installed
Welcome to Salvex Marketplace, where you can buy surplus, salvage, and discounted cement trucks and equipment as part of a commercial repurposing strategy.
Attention
This item is no longer available.Polytrack Clinker Cooler - for Cement Industry and Plants (1 Unit) - Unused / Never Installed Share with Buyers
-
-
Welcome to Salvex Marketplace, where you can buy surplus, salvage, and discounted cement trucks and equipment as part of a commercial repurposing strategy.
| ID | : | 183006065 |
| Seller | : | |
| Seller Industry | : | |
| Original Wholesale Value | : | $250,000 |
| Quantity | : | 1 Clinker Cooler |
| Manufacturer | : | ThyssenKrupp View more items from this manufacturer |
| Condition | : | The equipment was bought in 2012 and was never installed. It is new and in the boxes in storage since 2012. No photos available of the product as it is packed in crates for transport. Being sold "AS IS, WHERE IS". Buyer is responsible for shipping and handling. |
| | : | |
| Product Location | : | |
| End Time | : | |
Item Description
This Polytrack Clinker Cooler is available for sale as surplus, and is being sold as an asset liquidation for its owner. It was purchased in 2012, but never installed. It has been stored in boxes since purchased.
| Existing cooler Claudius Peters offer | New Polytrack Type 6 / 2,5-2,5 | |
| Capacity (t/d) | 3500 | 3500 |
| Number of grates/modules | 3 grates | 2 grates — 5 modules |
| Area (m2) | 90 | 80,5 |
| Specific load (t/j/m2) | 38,9 | 43,4 |
| Installed cooling air flow (Nm3/kg-ck) | 2,34 | 2,2 |
| Clinker temperature above ambient (°C) | 95 | 80 |
| Exhaust air rate nominal (Nm3/kg) | 1,364 | 0,765 |
| Exhaust air temperature (°C) | 210 | 220 |
| Cooler efficiency (%) | 72,6 (at 0,85 Nm3/kg-ck for secondary + tertiary air) | 81 (at 1,035 Nm3/kg-ck for secondary + tertiary air) |
| Installed cooling air rate (m3/h) | 379800 | 352000 |
| Expected savings : | ||
| Power consumption (kWh/t ck) Heat exchanger + Exhaust fan | —1 kWh/t less | |
| Heat consumption (kcal/kg-ck) | 5 to 10 kcal/kg-ck less | |
| Cooler operation costs (lighter maintenance) | Completely new cooler Best operation reliability See special guarantee No more drag chain | |
| Grate arrangement | Replacement of static grate and modification of the 3 existing grates | Static grate 2 grates of 2,5 modules each 6 tracks per grates (Grate : L = 12 m — I = 3m) |
| Drive unit | Replacement of mechanical drive to hydraulic drive | Hydraulic drive with 2 jacks per track and per grate |
| Instrumentation | Replacement of grate temperature sensors and hopper level probes | Complete set of pressure and temperature sensors |
| Hoppers under cooler | Modification of casing and drive replacement | No hoppers |
| Drag chain | Replacement of the existing drag chain | None |
| Electrical control | PLC to be assembled in local | New PLC |
| Upper casing | Local manufacture | Local manufacture |
| Air distribution and ducting | Local manufacture | Local manufacture |
| Crusher | Replacement of existing hammer crusher | New hammer crusher |
| Cooler fans | 4 news fans — 6 existing | 6 new fans — 2 existing |
| Air canon | 8 new air canons | 11 air canons |
The size of Polytrack® is 6/2,5-2,5, that means 2 grates of 2,5 modules each, 6 tracks per grate (width = 3 m and length = 12 m).
The cooler is equipped with a static grate at the kiln chute and with two mobile grates which consist of a total of 5 assembled modules 4 meters in width. The hammer crusher is located at the end of the grates.
One of the main advantages of this new type of cooler is that there is a separation between clinker transport and cooling system, there will be no influence of any transport system wear on the cooling efficiency which is one of the main problems with grate cooler of the old generation.
The clinker transport is ensured by 6 "tracks" which are located in the clinker bed and moving in the same direction as the clinker.
The cooling air is introduced by static plates with autogenous protection and they avoid any clinker dust chute into the cooling air chamber. There is no need for any hopper under the cooler casing and so no need for any transport system under the cooler. No slope for the grates is required thanks to the very good carriage efficiency.
The hydraulic system of the Polytrack is made of 6 units. Each track of the cooler has its unit. Each unit is made of one motor, a double pump, and 4 cylinders. Each track of each grate can be actuating separately with different speeds if necessary allowing high flexibility of the transport system and control of the clinker distribution on all the cooler width.
Advadvantages at a glance:
- High availability and robustness for continuous operation under the most demanding process conditions
- Modular and flexible design for fast and uncomplicated conversion projects
- High thermal efficiency and low power consumption for low operating costs
- Low wear, maintenance-friendly design for low, easy maintenance
- Attractive investment cost
- No clinker spillage and no requirement for undergrate spillage system
Manufacturer: ThyssenKrupp
All Equipment available for Sale from this Seller
- 183006132 - Flaktwood Exhaust Fan - for Cement Industry (1 Unit)
- 183006197 - Process Bag Filter Fan & Process Bag Filter - for Cement Industry (2 Items)
- 183006195 - Fives Pillard Precalciner Burners for Heavy Oil - For Cement Industry (3 Burners)
- 183006132 - Flaktwood Exhaust Fan - for Cement Industry (1 Unit)
- 183006065 - Polytrack Clinker Cooler - for Cement Industry and Plants (1 Unit) - Unused / Never Installed
- 183006064 - Aumund BWZ Series Chain Bucket Elevator - for Cement Industry (1 Unit)
- 183006063 - Aumund BWG Type Belt Bucket Elevators - for Cement Industry (2 Units)
- 183006066 - Sepol LMRS 330 High-Eficiency Dynamic Separators - for Cement Industry (2 Units)
- 183006062 - 360.000 m3/h- 40 mbar Fan After Filter - for Cement Industry (1 Unit)
- 183006060 - Pillard Rotaflam Rotary Kiln Burner (1 Burner) - For Heavy Oil/Gas Firing; Includes a Heavy Oil Valve Train to Kiln Burner
- 183006196 - Saacke Hot Gas Generator Set - For Cement Industry (1 Unit)
Seller Terms
- Salvex and the seller have the right to reject any and all offers.
- This product is sold AS IS, WHERE IS.
- Buyer is responsible for all taxes, duties, loading and freight charges.
- Seller does not offer any warranties or manufacturer warranties.
- Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
- It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Salvex is a prominent global e-commerce platform specializing in the sale of surplus commercial assets. We collaborate with thousands of companies, both publicly traded and private, spanning 200 countries worldwide. Our expertise lies in repurposing heavy equipment and cement trucks and equipment sourced from insurance claims, corporate surpluses, asset recoveries, bankruptcies, and natural disasters. We identify markets across North America, South America, Europe, Africa, the Middle East, Asia, and Oceania. Through our global sustainability initiatives, we contribute to environmental preservation by implementing carbon offset strategies through asset repurposing. We look forward to assisting your company in finding exceptional deals by showcasing surplus assets that align with your requirements.
Salvex handles surplus, bankruptcy, overruns, obsolete inventory, disposal, insurance claims, online auctions, liquidation sale, foreclosure, lockout, seized, scrap, salvage, new, used, damaged, refurbished, and asset recovery.
Repurposing commercial assets creates carbon offsets and sustainability corporate solutions.