My Account Home
Global Marketplace for Asset Recovery & Surplus Inventory

Categories

Manufacturers

My location (click to change): undetermined
All Listings > Commercial Equipment > Plant Equipment All Types > Secondhand Wire Rod Mill (25 Ton per Hour Capacity)

Secondhand Wire Rod Mill (25 Ton per Hour Capacity)

Location shown on the map is in the general vicinity of the actual location.
CLOSED - This listing is closed and no longer available for sale. To see active listings click here.
View Active Listings
Register As a Buyer 
ID: 182970446
Quantity: 1 Mill
Condition: Entire secondhand mill; used surplus. Was in use until 2015.

This lot is being sold on "AS IS, WHERE IS" basis. The buyer is responsible for dismantling, shipping and handling to final destination and for payment of any charges incurred or associated with it. The buyer is also responsible for ensuring quantity and quality. The seller has the right to reject all bids.
# of Bids: 13
Asking Price: Please log in to view Asking Price.
Product Location: , International, Rep of Korea
End Time: Bid As Soon As Possible
Time Remaining: closed
Market Maker: Ask a Question About This Listing: Alexander Sasha   +44 791 224 0805

Description

This Wire Rod Mill was in use, but  the owner stopped use in 2015. This is available for sale as used surplus for its owner to recover cost and storage space. The details of the mill is as below:
  • Quantity. 1 Second-hand Wire Rod Mill
  • Manufacturer.:   North America, Japan, Korea         
  • Built:   2007
  • Billet Size: 100x100 mm, 120x120 mm, 120x150 mm                
  • Length:  1100 – 2400 mm  
  • Product Diameter:       6-12 mm (Max.16 mm)
  • Capacity:  25 ton/h = 200,000 ton/annum
 
Consist of:
 
  • Reheating Furnace
    • Type:   Walking beam type            
    • Built:   2007
    • Redesigned from 4 zone to 8 control zone in 2014
    • Size:    3,800 mm x 27,000 mm          
    • Width in the Furnace: 2,800 mm  
    • Width in the Available Furnace:         2,400 mm
    • Heating Capacity:        Max. 25 ton/h (at 120x120x2400mm)
    • Heating Temp.:                        1200 °C                  
    • Extraction Quantity:             128 billet/hr
    • Billet Temperature:    
      • IN) 20 →                
      • OUT) 1,100                        (Max. 1,200)
    • Billet Size:       100x100,120x120,120x150 mm                 
    • Billet length:   1100~2400 mm
 
  • Walking Beam            
    • Make:  Yuken (Japan)                        
    • Built:               2007
    • Operation Type:          Hydraulic Crank Lever Type              
      • up → forward → down → back
    • Cylinder  Stroke:             200 mm (Max. 250 mm)        
    • Stroke:             160 mm
    • Operation Type:          38.9 ton (311 kg × 125 Units)                   
    • W/B Cycle: 28 sec/cycle (at 200 mm cycle)
 
  • Walking Beam Hydraulic Unit
    • Manufacturer.:   Yuken                   
    • Type:   120 kg/cm²    
    • Vane Water Glycol
    • Van Dump Ampare Control Type
    • Motor:         AC 22 kW × 6P × 440 V × 3EA  
    • Pressure: 100 kgf/cm² (Max. 150 kgf/cm²)
    • Oil:      Rando HD 46                  
    • Cylinder :
      • Center Trunnion Double Action Type
      • Rise Cylinder: Φ180-650 ST  * Horizontal Cylinder : Φ80-300 ST
    • Oil Tank:   600 L         
    • Water Tank:         600 L          
 
  • Burners:           
    • Make:  North American (U.S.A)  
    • Model: 4825
    • Built:   2014
    • Type:               Nozzle Mix Type Hot Air Gas Burner 
    • Volume and Quantity:                        
    • Heating Zone (Upper) 2 Zone (3 Burners / Zone)   
      • 600,000 kcal/h × 6 ea, 4825-7-B                 
    • Heating zone (Down) 2 ZONE (4 Burners / Zone)       
      • 600,000 kcal/h × 8 ea, 4825-7-B                
    • Fracture zone (Upper) 2 ZONE (2 Burners / Zone)      
      • 400,000 kcal/h × 4 ea, 4825-7-A           
    • Fracture zone (Down) 2 ZONE (3 Burners / Zone)   
      • ?400,000 kcal/h × 6 ea, 4825-7-A             
    • Preheating air temperature:     530             
    • Fuel:    LNG (Liquefied Natural Gas)                      
    • Heating Value:            10,414 kcal/m³                      
    • Feeding Pressure:        2.0 kg/cm²
    • Accessory Equipment:            Pilot Burner, Gas / Air Control Valve
    • Nozzle Type:               Nozzle mix type hot air gas burner

 

  • MCC Panel:
    • PLC Make:   Mitsubishi (JAPAN)
    • Built:   2007~2014
 
Charging Equipment:
 
Charging Bed:
  • Type:   Dog Chain Conveyor Drive Type                 
  • Size:    3 m × 8 m                 
  • Motor:         AC 5.5 kW × 4P × 440 V × CYCLO(1/121)
  • Charging Capa:           15 ton × 6.0 m/min         
  • Loading Weight: Max.: 15.5 ton, 50 Unit
 
Charging Roller Table:
  • Manufacturer:   Oksan (Korea)          
  • Type: Dog Chain Conveyor Drive Type.
  • Size:    4.0 m.                          
  • Motor: AC 1.5 kW × 4P × 440 V × CYCLO(1/29) × 2 EA.
  • Return Capa:   180 kg × 60 m/min                 
  • Length Measure:         PHOTO SENSOR
 
Charging Roller:         
  • Manufacturer.:   Oksan (Korea).              
  • Type: Chain Group Drive Roller Type.   
  • Size:    220Φ × 300 mm × 6 EA.         
  • Motor: AC 3.7 kW × 4P × 440 V × CYCLO(1/25).
  • Return Capa: 180 kg × 60 m/min.        
  • Control Method: VVVF Control (Reducing Control).
  • Cooling Type: Rotary Joint Single Water Cooling.
 
Extraction Roller:                                        
  • Manufacture.:   Oksan (Korea).             
  • Type: CHAIN GROUP DRIVE ROLLER TYPE               
  • Size:    220Φ × 300 mm × 6 EA        
  • Motor: AC 3.7 kW × 4P × 440 V × CYCLO(1/13)          
  • Return Capa: 180 kg × 90 m/min       
  • Control Method: VVVF Control (Reducing Control)          
  • Cooling Method: Rotary Joint Single Water Cooling.
 
Water Seal Through:
  • Manufacturer.:   Oksan (Korea).             
  • Type:  
    • 2,030 mm × 390 mm × 13,660 mm.    
    • 2,030 mm × 390 mm × 11,640 mm.
  • Material:          SUS304.           
  • Emission: Seal Box Cooling Water Emission.
 
Combustion Air Blower;
  • Mantufacturer.:   Chosun ENG - Kumsung Wind Power (Korea).
  • Picture: 250 m³/min × 1,200 mm Aq × 3,500 rpm (at 20).
  • Impeller:   HT60 × 800Φ.              
  • Motor: AC 110 kW× 2P × 440 V.
  • Reactor:    Startup  1,191 kVA.
 
Recuperator:
  • Mantufacturer.:   Chosun ENG - K-TEC (Korea).                        
  • Type:   Double Channel Type.                                   
  • Size:    1,450 mm × 3,250 mm × 6,300 mm (L).                     
  • Material:          SIC12, SIC10, SUS410L, STS304.               
  • Waste Gas Flow:         11,500 m³/h  (Max. 15,000 m³/h).       
  • Combustion Air Flow:            10,100 m³/h  (Max. 13,100 m³/h).       
  • Heat Collecting Capability                            
    • Waste Gas Temp:                
      • IN) 730 →   OUT) 320.   
    • Combustion Air Temp:       
      • IN) 20 →     OUT) 525.
  • Combustion Air Pressure Loss:           227 mmAq (Max. 388 mmAq).
 
Waste Gas ID Fan
  • Mantufacturer.:   Yejin ENG - Changshin Wind Power (Korea).
  • Size:   740 m³/min × 200 mmAq × 1,7500 rpm (at 20).
  • Impeller:   STS309 × #7.                           
  • Motor:         AC 37 kW × 4P × 440 V.
  • Reactor:    Startup  64 kVA.
 
Cooling Tower:
  • Mantufacturer.:   Eco-Tower.                        
  • Size:    4,99 0mm × 3,000 mm × 5,200 mm(H).
  • Cooling Type:             COUNTER FLOW.   
  • Cooling Capacity: IN) 50 → 35, Δ15.
  • Motor(Supply Heating Furnace): 37 kW × 4P × 440 V × 2 EA.
  • Motor (Supply Tower): 15 kW × 4P × 440 V.
  • Motor(FAN):         11 kW × 4P.                 
  • Pump: 4 m³/min × 16 mH.
 
Emergency Generator:
  • Mantufacturer.:   Buguk Electricity (Korea).                   
  • Type:   DMA-115 Diesel Engine.                                   
  • Fuel:    Diesel.                          
  • Blackout:         Ready for startup of cooling pump of heating furnace.
 
Electric Control Equipment
  • MCC Panel:           
    • 1,800 mm × 600 mm × 2,150 mm(H).             
    • 1,270 mm × 876 mm × 1,000 mm(H).
  • O/P Panel:  
    • 2,400 mm × 600 mm × 2,150 mm(H).             
    • 700 mm × 300 mm × 500 mm(H).      
  • Control Panel:
    • PLC:             Mitsubishi × MELSEC-Q.           
    • HMI:            Honeywell × HC-900.    
  • Operation PC:             Industrial PC 2 Unit Parallel Operation.
 
Roughing Mill:    
          
Turn Table:                                              
  • Type:   Air Cylinder.                
  • Operation Type:          Pneumatic Cylinder (Turn Angle 90°).
  • Motor: AC 5.5 kW * 4P * 440 V * CYCLO(1/15).    
  • Built:   2007.
 
Sloping Table:                                        
  • Type:   Roller Type Table / Chain Roller.           
  • Operation Type:     Chain Roller Con'v  (4,550 L).
  • Motor:             AC 3.7 kW * 4P * 440 V * CYCLO(1/15).                
  • Built:   2007.
 
Reject Table:                                           
  • Type:   Air Cylinder Type      
  • Operation Type:          Pneumatic Cylinder (Kicker out)
  • Motor: AC 3.7 kW * 4P * 440 V * CYCLO (1/15)              
  • Built:   2007
 
Roughing Mill:               
  • Mantufacturer.:   Sungjun (Korea).                      
  • Built:   2007.               
  • Type:  3-High                         Twin Stand (No.1 No.2).                 
  • Roll: * No1 Stand: Ø 470*1500.                                 
  • Roll: * No2 Stand: Ø 470*1500.                    
  • Bearing:           Four Row Tapered Roller Bearing.                 
  • Mill Motor:      AC 1,200 kW * 12P * 3,300 V * Iljin (Korea).           
  • Liquid Resistor:          SS-LR3S * Shinsung Electric (Korea).
  • Maneuver Section:      3.6 kV*400 A*Hyundai Heavy Industries (Korea).
  • Reducer gear:              Deceleration ratio - 1/5.727.               
  • Oil Pump Motor:         AC 30 kW * 4P * 440 V * Hyosung (Korea) 
  • Reducer motor:           750 kW.
  • Built:   2007.
  • PLC:    Mitsubishi (Japan).
 
Reverse Table:   
  • No.1 3-Hi Stand
    • Front Table     
      • Type:   Shift Down Type.
      • Pass: * Forward (Lower):       5 Pass.              
      • Pass: * Backward (Upper):     4 Pass.
      • Lower Roller Table: Chain Roller Con'v.        
      • Motor: * AC 30 kW * 6P * 440 V * Hyosung.
      • Motor: * AC 7.5 kW * 6P * 440 V * Hyosung.
      • Upper Table:   Air Cylinder Operation.                       
      • Table Length: 25 m.

 

  • Rear-Pass Table
    • Type:   Cross Type Roller Table.                      
    • Pass: * Forward (Lower):       5 Pass.
    • Pass:    * Backward (Upper): 4 Pass.              
    • Forward Roller Table:             Chain Roller Con'v.
    • Motor:             AC 22 kW * 6P * 440 V * Hyosung (Korea).
    • Cross Roller Table: Chain Roller Con'v Operation.
    • Motor:             * AC 11 kW * 6P * 440 V * Hyosung.                       
    • Motor: * AC 7.5 kW * 6P * 440 V * Hyosung.
    • Table Length: 27 m.   
 
  • Repeater         
    • Type:   Welding Structure.                   
    • Operation Type: Structural Steel Loop Kicker Cylinder.
    • Material:          SS440.
 
  • No 2. 3-Hi Stand 
    • Front Table                 
      • Type:   Kicker Type Roller Table
      • Pass:    * Forward (Lower):    1 Pass             
      • Pass:    * Backward (Upper): 1 Pass
      • Lower Roller Table:    Chain Roller Con'v    
      • Motor:             AC 5.5 kW * 6P * 440 V * Hyosung(Korea)
      • Upper Table Kicker:    Air Cylinder               
      • Table Length: Approx.  45 m
 
  • Rear-Pass Table        (#10 Pass Exit Table) 
    • Type:   Through Type.              
    • Operation Method:     Chain Roller Con'v.   
    • Length: approx. 10 m.
    • Motor: AC 5.5 kW * 6P * 440 V * Hyosung (Korea).
 
Oil Celler:            
  • Oil Cooler * Mantufacturer:       Daehung Cooler (Korea).          
  • Oil Cooler * Size: DHLFE-F-1000LT.
  • Oil Cooler * Tank Volume:     1500 * 1530 * 1200 H.                        
  • Motor: AC3.7 kW * 4P * 440 V.
 
Crop Shear:                                              
  • Type:   Flying Shear, Air Clutch-Break Type.             
  • Cutting Area: max. 40 x 40 mm.                   
  • Cutting Speed:            10 m/sec.          
  • Motor * Main:             AC 37 kW * 6P * 440 V * Hyosung (Korea).
  • Motor * Reset:            AC 2.2 kW * 4P * 440 V * Hyosung (Korea).
  • Motor * HYD:                        AC 2.2 kW * 6P * 440 V * Hyosung (Korea).
  • Motor: 37 kW.
  • Control Panel: * W700 * H2,150 * D450.
  • Control Panel: * PLC: MITSUBISHI * MELSEC-A.
 
Roughing Mill Control System:                         
  • MCC Panel:         W2,400 * H2,150 * D600 1 Plane.     
  • O/P Panel:           W2,400 * H955 * D600 1 Plane.                    
  • Control Panel: * W750 * H2,150 * D600 1 Plane.
  • Control N        * PLC : MITSUBISHI * MELSEC-A 1Unit.
 
INTERMEDIATE MILL                  
  • Mantufacturer.:   Sungjun (Korea).                       
  • Built:   1994.
  • #11 PASS Entrance SANP SHEAR.              
  • Type:  
    • Air Cylinder Type.
    • Air Cylinder:   CA1T*100*180.          
  • Solenoid V/V: VSP-4130.
  • #11~12 PASS Roll Stand.                                   
  • Type:   Close Head Type.                   
    • Roll: * #11 Pass : Ø 280 * 800.           
    • Roll: * #12 Pass : Ø 290 * 800.                      
  • Bearing * Four Row Cylindrical Roller Bearing.        
  • Bearing * Angular Contact Ball Bearing.
  • Bearing * Deep Groove Ball Bearing.
  • Motor: * AC 500 kW * 10P * 3,300 V * Iljin (Korea).
  • Motor : * AC 500 kW * 10P * 3,300 V * Icheon (Korea).
  • Metal Resistor:            CAM TYPE * 6 High * 1Unit.           
  • VCS Panel:     3.6 kV * 400 A *  * Hyundai Heavy Industries.
  • Reducer * Type:          BS-2HI-DIVIDE*280.
  • Reducer * Power:       500 kW(2.13/3.0 M/SEC).

 

Repeater:                            

  • Location: #12~13 pass.                        
  • Type: Welding Structure.        
  • Operation Method: Structure Steel Loop Kicker Cylinder.                
  • Material:          SS440.
 
#13~14 Pass Roll Stand:
  • Type:   Close Head Type.                   
  • Roll: * #13 Pass : Ø 280 * 800.           
  • Roll: * #14 Pass : Ø 290 * 800.                      
  • Bearing * Four Row Cylindrical Roller Bearing.        
  • Bearing * Angular Contact Ball Bearing.
  • Bearing * Deep Groove Ball Bearing.
  • Motor:                         AC 380 kW * 12P * 3,300 V * Icheon (Korea).
  • Metal Resistor:            MC TYPE * 5 High * Shinsung * 1 Unit.
  • VCS Panel:     3.6 kV * 400 A *  Hyundai Heavy Industries * 1 Phase.
  • Reducer * Type:          BS-2 HI-DIVIDE*280.
  • Reducer * Power :      500 kW(2.19/2.88 M/SEC).
 
Repeater                            
  • Location: #13~14 pass.                        
  • Type: Welding Structure.
  • Operation Method: Structure Steel Loop Kicker Cylinder.                
  • Material: SS440.         
 
Oil Celler:
 
Range: #11~14 Pass               
  • Motor:             3.7 kW*4P.                  
  • Oil Cooler * Make:     Daehung Cooler.
  • Oil Cooler * Size:        DHLFE-F800.             
  • Oil Cooler * Tank Capa: 1240 * 2000 * 1300H.

?#15 PASS Entrance SNAP SHEAR             

  • Type:   Air Cylinder Type.
  • Air Cylinder:   CS1TN125-180-CJJD2905.     
  • Solenoid V/V: VSP-4130.      
 
#15~16 PASS Roll Stand                                   
  • Type: Close Head Type                     
    • Roll: * #15 Pass : Ø 270 * 800.           
    • Roll: * #16 Pass : Ø 300 * 800.         
  • Bearing * Four Row Cylindrical Roller Bearing.       
  • Bearing * Angular Contact Ball Bearing.
  • Bearing * Deep Groove Ball Bearing.
  • Motor:             AC 380 kW * 12P * 3,300 V * Iljin (Korea).
  • Metal Resistor:            CAM TYPE * 6High * 1 Unit.           
  • VCS Panel:     3.6 kV * 400 A * Hyundai Heavy Industries.
  • Reducer * Type:          BS-2HI-DIVIDE*280.
  • Reducer * Power:       450 kW(3.13/4.0 M/SEC).
 
Oil Celler                        
  • Range:    #15~19 Pass.            
  • Motor:             * AC 3.7 kW * 4P * 440 V.                
  • Motor:             * AC 5.5 kW * 6P * 440 V.  
  • Oil Cooler * Make:     Daehung Cooler (Korea).
  • Oil Cooler * Size:        DHLFE-F800.             
  • Oil Cooler * Tank Volume: 1300 * 2200 * 920H.

Intermediate Mill Ccontrol System  

  • Built: 2014     
  • O/P Panel:       W800 * H1,300 * D950 * 1 Plane                 
  • MCC Panel:    W800 * H1,500 * D300 * 1 plane     
  • Cooling Water Motor:             AC 30 kW * 4P * 440 V * Hyosung
 
Finishing Mill                
  • Mantufacturer.:   Sungjun (Korea).                       
  • Built:   1984.
 
#17 PASS ENTRANCE SANP SHEAR                  
  • Type:   Air Cylinder Type.
  • Air Cylinder:   CA2C*100*150 ST.                            
  • Solenoid V/V:             VSP-4130.
 
#17~22 PASS Roll Stand                                  
  • Type:   2 High Open Head Type.                    
  • Roll: * #17 Pass: Ø255 * 550.             
  • Roll:    * #18 Pass: Ø260 * 550.
  • Roll: * #19 Pass: Ø260 * 550.             
  • Roll:    * #20 Pass: Ø270 * 550.
  • Roll: * #21 Pass: Ø260 * 550.             
  • Roll:    * #22 Pass : Ø260 * 550.        
  • Bearing * Four Row Cylindrical Roller Bearing.        
  • Bearing * Angular Contact Ball Bearing.
  • Bearing * Deep Groove Ball Bearing.
  • Motor: AC 340 kW * 8P * 3,300 V * Make: LCM (Korea).
  • Metal Resistor:            SS-LRS3S * Shinsung Electric (Korea) * 1Unit.
  • VCS Panel:     3.6 kV * 400 A * Make: Hyundai Heavy Industries 1Unit.
  • Pinion Stand * Type: Double Helical Gear.
  • Pinion Stand * Power:            340 kW.
 
#17~22 PASS Decelerator                                         
  • Pinion Stand * Type: Double Helical Gear * 6Unit.           
  • Power:          340 kW.                      
 
#17~18 Pass Reducer * Type:            Welding Structure Forced Circulation Fueling.
#17~18 Pass Reducer * Size: 2740*850*1590.
 
#19~20 Pass Reducer * Type:            Welding Structure Forced Circulation Fueling.
#19~20 Pass Reducer * Size: 2646*850*1410.
 
#21~22 Pass Reducer * Welding Structure Forced Circulation Fueling.
#21~22 Pass Reducer * Size: 2440*700*1310.
 
Oil Celler
  • Pass:    #20~22 Pass                           
    • Motor:             * AC 2.2 kW * 4P * 440 V.    
    • Motor:             * AC 2.2 kW * 6P * 440 V.  
    • Oil Cooler * Make:     Daehung Cooler (Korea).
    • Oil Cooler * Type:      DHLFE-F-800LT.
    • Oil Cooler * Tank:      1000 * 1410 * 1300H.

Finishing Mill Ccontrol Panel

  • O/P Panel:       W800 * H1,350 * D300 * 1.
  • MCC Panel:    W800 * H1,700 * D300 * 1.
  • Cooling Water Motor:                         AC 30 kW * 4P * 440 V * Hyosung (Korea).
 
Rotary Shear                
  • Type:   Cutting Wheel Type.                
  • Motor:             AC 11 kW * 4P * 440 V.
 
End Cutter                                  
  • Type:   Crop Shear Remodeling Type.
  • Motor:             AC 3.7 kW * 4P * 440 V.
 
Pouring Reel                  
  • Built:   1985.                
  • Revamped:      1995.   
  • Type: VERTICAL V.S MOTOR  Vertical DRUM type * 4 Unit.
  • Power:             50 HP*975*300 KG/BANDLE*15.8? * 4 Unit.
  • Motor:                         AC 37 kW * 6P * 440 V  * 4 Unit.
 
Pouring Reel Bottom Roller Conveyor                    
  • Built:   1994.
  • Type:               Chain Roller Con'v.                 
  • Power: 1,300W*8,000L*200MM (PITCH).
  • Motor:             * AC 3.7 kW * 4P * 440 V * CYCLO(1/29)             * AC 5.5 kW * 6P * 440 V.
                       
Correction, Binding Roller Conveyor                     
  • Built:   1994.   
  • Type:               Chain Roller Con'v.                 
  • Capacity:         1,300 W*43 M*2 Unit.                       
  • Motor:             AC 5.5 kW * 6P * 440 V * CYCLO (1/89).
 
Wire Rod Automatic Binding Machine                        
  • Built:   2002.
  • Type:   KNRA - 3.2/650.                     
  • Capacity:         5.5 kW*4P*0.95 TON.
  • Motor:             AC 5.5 kW*4P.
 
Ejector:                                                                               
  • Built:   1994.   
  • Type:   Hydraulic CYLINDER Type.             
  • Capacity:         500 KG.          
  • Operation:       Rotation (90°)→Advance→Retreat→Return(90°).
  • HYD Cylinder:           * 80Φ *620 ST.                        
  • HYD Cylinder:           * 80Φ *700 ST.
 
Unloader Pillar:                                                                      
  • Built:   1994.               
  • Type:   Hydraulic MOTOR Type (180° Rotation).      
  • Capacity:         2,000 KG (10~12EA COIL).
  • Motor:             2-020 AA2 23.41 L/MIN.                   
  • Reducer: C-C 200 3.02 kW*1/60 (Worm type).
 
Hyd. Unit (Ejector & Pillar):
  • Built:   1994.
  • Motor:             AC 11 kW * 6P * 440 V.                    
  • Capacity: 1610 * 1030 * 565 H.
  • Pump: PV2R12-25-53-L-BEDA-40.
 
Product Packaging Machine:                                           
  • Built:   1998.
  • Type:   Hydraulic Type.           
  • Capacity: 2 TON * 210 KG.    
  • Cylinder: HTA 150Φ *1700ST.

Hyd. Unit (Product Packaging Machine):

  • Built:   1998.
  • Motor:             AC 22 kW * 6P * 440 V.                    
  • Capacity: 1100 * 880 * 680H.
  • Pump: V210-9W-1C-12*S214.
 
After-Treatment Control Equipment (Wires & Cooling Con'v)
  • Built:   1995.
  • Pouring Reel Control: 
    • MCC Panel: W1,000 * H1,900 * D600 * 2Face.
    • O/P Panel:    W1,200 * H1,500 * D800 * 1Face.
  • Cooling Control: 
    • MCC Panel:          W1,300 * H2,000 * D500 * 1Face.
  • PLC : Mitshubishi * MELSEC-Q * 1Unit.
    • O/P Panel: W600 * H850 * D300 * 1Face.
    • O/P Panel: W600 * H1,020 * D370 * 2Face.
  • Hydraulic Control:
    • MCC Panel:       W600 * H1,1000 * D300* 1Face.
 
Spare Parts List:
AC 1000 kWx 12Px  3300 V x 1 EA.             
AC 500 kWx 10Px  3300 V x 1EA.
AC 340 kWx 8Px  3300 V x 1 EA.                 
Rolls:   364 EA.
 
Small Motors:              10 EA.                          
Requested Area:         20 m x 200 m.

Seller Terms

  • Salvex and the seller have the right to reject any and all offers.
  • This product is sold AS IS, WHERE IS.
  • Buyer is responsible for all taxes, duties, loading and freight charges.
  • Seller does not offer any warranties or manufacturer warranties.
  • Upon receipt of cleared funds, Seller will provide the Buyer a Release Order for item pick up. Title transfers from Seller to Buyer upon issuance of the Release Order.
  • It is Buyer's responsibility to verify quantities and condition at the time of pick up. Once the product has been removed from Seller's location, there will be no adjustments based on quantity or condition.
Location shown on the map is in the general vicinity of the actual location.

Other Listings in Plant Equipment All Types

VIEW ALL PLANT EQUIPMENT ALL TYPES LISTINGS (10)

Other Listings in Commercial Equipment

VIEW ALL COMMERCIAL EQUIPMENT LISTINGS (539)